Shure orporated GLXD6 Wireless Guitar Pedal Receiver User Manual Exhibit D Users Manual per 2 1033 b3

Shure Incorporated Wireless Guitar Pedal Receiver Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

User GuideShure Incorporated Confidential© 2013 Shure Incorporated 27A20637 (Rev. Preliminary) Printed in U.S.A.Please Note: The following document layout is preliminary to identify, organize, and prioritize content. All copy including titles, descriptions, photos, specifications, and artwork are not final at this time. GLXD6 Guitar Pedal Receiver / TunerDRAFT 3.4.13
DRAFT 3.4.13
IMPORTANT SAFETY INSTRUCTIONS1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings.4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventila-tion and install in accordance with the manufacturer’s instructions. 8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product. 9. DO NOT defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace-ment of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, conve-nience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer.12. USE only with a cart, stand, tripod, bracket, or table specified by the manu-facturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to qualified service personnel. Servicing is required when the ap-paratus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance coupler shall remain readily operable. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.21. Operate this product within its specified operating temperature range.This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and mainte-nance instructions in the literature accompanying this unit. WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.WARNING: Battery packs shall not be exposed to excessive heat such as sunshine, fire, or the like. WARNING• Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate• Follow instructions from manufacturer• Never put batteries in mouth. If swallowed, contact your physician or local poison control center• Do not short circuit; may cause burns or catch fire• Do not charge or use battery packs with other than specified Shure products• Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packsWARNING: Danger of explosion if battery incorrectly replaced. Operate only with Shure compatible batteries.Note: • This equipment is intended to be used in professional audio applications. • EMC conformance is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance. • Use this battery charger only with the Shure charging modules and battery packs for which it is designed. Use with other than the specified modules and battery packs may increase the risk of fire or explosion. • Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment. Note: Use only with the included power supply or a Shure-approved equivalent. DRAFT 3.4.13
23414System OverviewGLX-D delivers superior digital audio in a compact, easy to use wireless system. More audio channels are placed on-air by taking advantage of the globally available 2.4 GHz spectrum. The compact low-profile design easily fits into pedalboard configurations. Built-in chromatic tuner simplifies setups while offering flexible tuning options. Advanced frequency hopping technology detects interference and automatically switches to a clear backup channel to prevent audio dropouts. Channel scanning finds the best receiver channel for wireless audio and automatically links to transmitter.• Clear digital audio• Operates in 2.4 GHz spectrum, available worldwide.• Compact rugged metal construction• Compatible with standard 9 V DC power supplies (250 mA minimum)• Rechargeable transmitter batteries deliver cost-efficiency and up to 16 hours of runtime • Adjustable transmitter gain to optimize audio signal• Automatically detects and avoids interference to preserve audio quality• RF back-channel for remote control of transmitter functions• Automatic transmitter power-off to conserve battery life when transmitter is not in use.Included ComponentsShure Rechargeable Battery SB902Micro USB Battery Charger SBC-USBPower Supply PS23Premium Guitar Cable WA305Optional AccessoriesCar Battery Charger SBC-CARDocking Battery Charger SBC-902Quick StartTo reduce set up time, the transmitter and receiver automatically link to form an audio channel the first time they are powered on and never have to be linked again.Note: If using multiple effects pedals, place the receiver pedal first in the signal chain. Step ① Connect power supply to the receiver and plug the power cord into an AC power source.Step ②Connect the transmitter to the instrument and turn on the transmitter.Step ③Connect receiver audio output to an amplifier or mixer. Turn on the receiver and verify the blue RF LED is on. Step ④Check the audio and adjust the gain if necessary.DRAFT 3.4.13
5Guitar Pedal Receiver OverviewDisplay Screen, Indicators, and ControlsThe controls and display offer specific functionality depending on which mode is selected:① Power SwitchTurns power on or off.② DC Power ConnectorConnect DC power supply (9 to 15 V DC, 250 mA min.)Note: Compatible with positive tip or negative tip power supplies.③ Audio Output JackConnect to amplifier or mixer.Note: If using multiple effects pedals, place the receiver pedal first in the signal chain. ④ USB Port⑤ DisplayDisplays receiver and tuner settings.⑥ AntennaCarries wireless signal, 2 per receiver.⑦ FootswitchPress to select receiver or tuner mode.Tuner Mode 2 3146linkmode autoaudio rf channelgroup675rf channelgroupautolinkmode audio134562789rf channelgroupautolinkmode audio156234① Transmitter Battery MeterIlluminated segments indicate remaining battery life② DisplayGroupChannelLK (controls locked)UN (controls unlocked)-- (frequency not available)③ Link ButtonPress to manually link receiver to a transmitter or activate the remote ID function④ Mode Button Press to enable audio gain adjustment. Use ▲ ▼ buttons to adjust gain.⑤ Audio LED Illumination corresponds to audio level.⑥ Auto LEDIlluminates if selected group has backup channels available.⑦ RF LED• ON = Linked transmitter is on• Flashing = Searching for transmitter• OFF = Linked transmitter off or transmitter unlinked⑧ Channel ButtonPress to select and edit channel⑨ Group ButtonPress to select and edit group① Flat IndicatorIlluminates when note is flat.② Tuning Bar DisplayLEDs illuminate to indicate tuning deviation.③ Sharp IndicatorIlluminates when note is sharp.④ Note Display Displays the name of the note or (--) if the tuner is idle.⑤ Mode ButtonPress to enter tuner menu settings.⑥ Arrow ButtonsUse ▲ ▼ buttons to select and edit menu settings.Receiver ModeDRAFT 3.4.13
6Bodypack TransmitterTransmitter Status LED ① AntennaCarries wireless signal.② Status LEDIndicates transmitter status.③ Power SwitchTurns the transmitter on/off.④ TA4M Input JackConnects to a 4-Pin mini connector (TA4F) microphone or instrument cable.⑤ Micro USB Charging PortConnection for battery charging.⑥ Link Button• Press and hold within 5 seconds of power-on to manually link with receiver• Press momentarily to activate Remote ID function to a linked receiver⑦ Battery CompartmentHolds Shure rechargeable battery. Wearing the Bodypack TransmitterClip the transmitter to a belt or slide a guitar strap through the transmitter clip as shown. For best results, the belt should be pressed against the base of the clip. LED is green during normal operation. LED color or flashing indicates a change in transmitter status as shown in the following table:Color State StatusGreen Flashing (slow) Transmitter attempting relink with receiverFlashing (fast) Unlinked transmitter searching for receiverFlashes 3 times indicates locked transmitter when power switch is pressedRed On battery life < 1 hourFlashing battery life < 30 minutesRed/Green Flashing remote ID activeAmber Flashing battery error, replace batteryDRAFT 3.4.13
7Batteries and ChargingLED Status During ChargingThe following LED states indicate battery status when the transmitter is connected to a charger: • Green = charging complete• Green Flashing = battery charge > 90% • Red = battery charging• Amber Flashing = battery error, replace batteryCharging Times and Transmitter RuntimesUse the following table to determine approximate battery runtime based on the duration of charging time. Times shown are in hours and minutes.Note: Batteries charge faster when using an AC powered charger versus a USB connection.AC Power Source ChargingUSB Connection ChargingTransmitter Runtime0:15 0:30 up to 1:300:30 1:00 up to 3:00 1:00 2:00 up to 6:003:00 4:00 up to 16:00**Storage time or excessive heat will reduce maximum runtime.Note: GLX-D transmitters automatically power-off after approximately 1 hour to conserve battery life if the signal from a linked receiver is not detected. Installing Transmitter BatteriesBodypack Transmitter1. Move the locking lever to the open position and slide the battery door open.2. Place the battery into the transmitter.3. Close the battery door and slide door to engage the latch.GLX-D transmitters are powered by Shure SB902 lithium-ion rechargeable batteries. Advanced battery chemistry maximizes runtimes with zero memory effects, eliminating the need to discharge batteries prior to charging.When not in use, recommended battery storage temperature is 10°C (50°F) to 25°C (77°F).Note: The transmitter will not pass RF or audio signals when connected to the charging cable.The following battery charging options are available:linkmode autoaudio rf channelgroup①②③④⑤⑥⑦Transmitter Battery MeterThe number of segments illuminated on the meter indicates the remaining battery life for a linked transmitter:① = > 30 min② = > 2 hours③ = > 4 hours④ = > 6 hours⑤ = > 8 hours⑥ = > 10 hours⑦ = > 12 hoursNote: The LEDs will cycle on/off while battery life is being calculated.Charging from a USB PortCharging from an AC Power SourceFor fastest battery charging, use an AC power source to charge the battery.1. Plug the charging cable into the charging port on the transmitter.2. Plug the charging cable into an AC power source.The USB charger is a convenient option for charging the battery using power from a standard USB port commonly found on computers and other devices.1. Plug the USB charging cable into the charging port on the transmitter.2. Plug the cable into a standard USB port.DRAFT 3.4.13
8Multiple Receiver SystemsIf several channels of wireless audio are needed, up to 8 GLX-D receivers can operate simultaneously in the 2.4 GHz spectrum. For ease of set up, available frequencies are divided into three groups based on the number of receivers supported. All receivers in the system must be set to the same group. To select a group, determine the total number of receivers in the system (channel count), and then select the appropriate group. Note: To maximize the number of receivers on-air, Group 3 does not offer backup frequencies. Group 3 should only be used in controlled Wi-Fi environments to prevent interference from unexpected Wi-Fi devices.Group Channel Count Backup Frequencies Available? Notes1 Up to 4 Yes Initial Factory Setting.2 Up to 5 Yes Best Group to use if you experience interference.3Up to 8 No Only use Group 3 in controlled Wi-Fi environments because there are no backup frequencies to avoid interference.Note: If you experience interference, reduce transmitter to receiver distance and set all GLX-D systems to group 2, which is the most robust wireless group.See "Tips to Improve Wireless System Performance" section for additional steps if needed.Setting Up Receivers and TransmittersNote: Before beginning, turn off all receivers and transmitters. Turn on and set up each receiver/transmitter pair individually to prevent cross-linking.1. Turn on the first receiver.2. Press and hold the group button to select a group (if necessary) or if the group is already set, press the channel button to scan for the best available channel.3. Turn on the first transmitter. The blue RF light will illuminate when a link is established.Repeat steps 1-3 for each additional receiver and transmitter. Remember to set each receiver to the same group.Manually Selecting a Group and ChannelSpecific groups and channels can be assigned to the receiver instead of using the automatic scan function. Note: Group 3 should only be used in controlled Wi-Fi environments to prevent interference from unexpected Wi-Fi devices.Manually Linking a Transmitter to a ReceiverUse the manual linking option to change the transmitter linked to a receiver. For example, changing the linked transmitter from a bodypack to a handheld.Use the following steps to manually change the transmitter linked to a receiver:1. Turn on the transmitter: Within 5 seconds, press and hold the LINK button until the transmitter LED begins to flash green.2. Press and hold the link button on the receiver: The blue rf LED will flash, and then remain on when the link has been established.3. Test the audio to verify the link and adjust the gain if necessary.Note: Dashes appearing on the group and channel display during a channel scan indicate that frequencies are not available in the selected group. Choose a group that supports more receivers and repeat the set up steps. Selecting a Group1. Press and hold the group button for 2 seconds until the group display flashes.2. Press the group button to scroll through the available groups.3. The receiver will automatically save the selected group.Selecting a Channel1. Press and hold the channel button for 2 seconds until the channel display flashes.2. Press the channel button to scroll through the available channels.3. The receiver will automatically save the selected channel.Note: A double dash symbol-- displayed on the receiver screen during a channel scan indicates that there are no available channels within the selected group. Choose a group with more channels and repeat set up steps. DRAFT 3.4.13
92.4 GHz Spectrum OverviewGLX-D operates within the 2.4GHz ISM band which is utilized by for Wi-Fi, Bluetooth, and other wireless. The benefit of 2.4GHz is that it’s one global band that can be used anywhere in the world, license free. Overcoming the Challenges of 2.4GHzThe challenge of 2.4GHz is that Wi-Fi traffic can be unpredictable. GLX-D meets these challenges in the following ways:• Prioritizes and transmits on the best 3 frequencies per channel (choosing from a pool of 6 frequencies across the 2.4GHz band)• Repeats the most important information such that one frequency can be taken out entirely without audio interruption• Continuously scans during usage to rank all frequencies (both current and backup frequencies)• Seamlessly moves away from interference to backup frequencies without audio interruptionCoexisting with Wi-FiGLX-D avoids continuous Wi-Fi traffic by scanning the entire 2.4GHz environment and selecting the 3 best frequencies to transmit on. The result of this is reliable performance for your GLX-D wireless system as well as avoiding Wi-Fi transmissions which may be important as well.“Bursting” Wi-Fi is harder to detect as it is periodic; however, because GLX-D repeats the most important information even if these bursts are very high-level, they don’t have an effect on your audio performance.Challenging Wireless EnvironmentsSome environments are more difficult than others for 2.4 GHz wireless system performance. The simplest solution in many cases is to reduce the transmitter to receiver distance such as placing the receivers on the stage with a clear line of sight.Challenging environments include:• Outdoors• Very high ceilings• 3 or more GLX-D receivers in use• Strong Wi-Fi presence• Non-Shure 2.4 GHz systems in useTips to Improve Wireless System PerformanceIf you encounter interference or dropouts, try the following suggestions:• Scan for the best available channel (press the channel button)• Reposition the receiver so there is nothing obstructing a line of sight to the transmitter (including the audience)• Keep the transmitter and receiver more than 2 meters (6 feet) apart• Keep transmitter to receiver distance within 60 meters (200 feet) - place receivers on-stage within line of sight if possible• Remove or relocate nearby sources of wireless interference, such as Wi-Fi devices or hotspots, cell phones, two-way radios, computers, media players, and digital signal processors• Disable non-essential Wi-Fi/bluetooth devices and avoid heavy Wi-Fi traffic activities such as downloading large files or viewing a movie.• Locate GLX-D receivers away from non-Shure 2.4 GHz receivers• Avoid placing transmitter and receiver where metal or other dense materials may be present• Recharge or replace the transmitter battery• Keep transmitters more than 2 meters (6 feet) apartNote: GLX-D transmitters closer than 6 inches (15 cm) to other non-GLX-D transmitters may cause audible noise in that transmitter• During sound check, mark trouble spots and ask presenters or performers to avoid those areas2.4 GHz Frequency TablesThe following table lists receiver frequencies, channels, and latency for each group:Group 1: Channels 1-4 (latency = 3.9 ms)1/1 1/2 1/3 1/42424 2418 2411 24052425 2419 2413 24062442 2448 2430 24362443 2450 2431 24372462 2469 2476 24552464 2471 2477 2457Group 2: Channels 1-5 (latency = 7.3 ms)2/1 2/2 2/3 2/4 2/52423 2404 2417 2417 24372424 2405 2418 2418 24382443 2426 2451 2451 24622444 2427 2452 2452 24632473 2456 2468 2468 24772474 2457 2469 2469 2478Group 3: Channels 1-6 (latency = 7.3 ms)3/1 3/2 3/3 3/4 3/5 3/62415 2422 2426 2447 2409 24312416 2423 2427 2448 2451 24622443 2439 2457 2468 2452 2463DRAFT 3.4.13
10Receiver Operation• Lock status is not changed by power cycles• Tuner functionality and editing remains available• The receiver power switch does not lockLocking the Receiver ControlsSimultaneously press and hold the group and channel buttons to lock or unlock the receiver.• LK is displayed if a locked control is pressed• UN is displayed momentarily to confirm the unlock commandlinkmode autoaudio rf channelgrouprf channelgroupautolinkmode audiod B - 9Use the Remote ID feature to identify linked transmitter and receiver pairs. When Remote ID is active, the receiver LCD will blink and display ID. The status LED of the corresponding transmitter will alternately flash red and green for approximately 45 seconds.Audio Gain AdjustmentTransmitter gain has an adjustment range from -20 dB to +40 dB, in 1 dB increments.Tip: Try the 0 dB (unity gain) setting as a starting point, and then make gain adjustments if necessary.1. Press and hold the mode button on the receiver until dB appears on the display.2. Press the up/down arrows to adjust the gain.Note: The intensity of the green audio LED corresponds to the audio level.The controls of the receiver and transmitter can be locked to prevent accidental or unauthorized changes to settings.The following parameters are not affected by locking the controls:To activate Remote ID:1. Momentarily press the link button on the transmitter or receiver.2. The display of the linked receiver will blink and show ID and the status LED on the linked transmitter will flash red/green.3. To exit Remote ID mode, momentarily press the link button or allow the function to timeout.I DLocking the Transmitter Power SwitchStarting with the transmitter set to off, press and hold the LINK button while turning on the transmitter. Repeat sequence to unlock.Note: The transmitter status LED will flash red/green if a locked switch is set to the off position.Locking and Unlocking the ControlsRemote IDDRAFT 3.4.13
11Indicator: Needle or StrobeOutput: Live or Mute DetuneNeedleA single LED will illuminate on the tuning bar to indicate sharp or flat. The green center LED will illuminate when the note is in tune.StrobeA sequence of three LEDs will travel across the tuning bar in the direction of sharp or flat. The LEDs will remain stationary when the note is in tune.Frequency Offsetb0b1b2The tuner indicator can be set to display a needle style or strobe style.The audio output can be set to Live or Mute in tuning mode:• Live: Audio is passed to the amplifier or mixer• Mute: Audio is muted at the pedal outputThe Detune feature can detect instruments that have been detuned up to 2 semitones (half steps). The display will indicate the detuning as follows:Adds sharp or flat symbols to the display of non-natural notes. Frequency Offset adjusts the reference frequency from A440. The range of adjustment is 432 Hz to 447 Hz in 1 Hz increments.When adjusting the frequency, the last 2 digits of the value will be show. For example, "32" would appear on the display when the frequency has been set to 432 Hz.Note: Two dots appear in the display as a reminder that the reference frequency is offset.A440 447 Hz432 HzDisplay BrightnessThe receiver has a built-in light sensor to automatically adjust the display brightness. To manually adjust the brightness choose one of the following settings:*1*A*2*3L....i....v....e M....u....t....eN..e..e..d..l..e S..t..r..o..b..e#b b#*A = automatic *1 = low *2 = medium *3 = highTuner Options• Indicator: Needle or Strobe• Output: Live or Mute• Display Brightness• Detune• Sharps and Flats• Frequency OffsetSelecting and Editing Tuner Menu SettingsUse the following buttons to select and edit the tuner menu settings:• Use the mode button access the menu and to scroll between menu settings• Use the Use ▲ ▼ buttons to change a menu parameter• Use the footswitch to enter and save parameter changesTuner MenuEnter tuner mode by pressing the footswitch. In tuner mode, the controls will only affect tuner functions. Receiver RF setting will not be affected.Note: Indicator and Output settings are displayed in a scroll from left to right.Note: Indicator and Output settings are displayed in a scroll from left to right.rf channelgroupautolinkmodeM...e...n...uSharps and FlatsSharps and Flats Flats only Sharps only b0 = Standard Tuning b1 = 1 Semitone b2 = 2 SemitonesNote: Two dots appear in the display as a reminder that the pedal is detuned.DRAFT 3.4.13
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII12Using the Tuner1. Press the footswitch to enter tuner mode.2. Play each note individually. The display shows the name of the note.3. Adjust tuning until both indicators illuminate and the needle or strobe indicate that tuning is correct.Needle ModeBoth tuning indicators and the center green segment will illuminate when the note is in tune. In TuneFlatSharpStrobe ModeBoth tuning indicators will illuminate and the strobe segments will remain stationary when the note is in tune.In TuneFlatSharpDRAFT 3.4.13
13TroubleshootingIssue Indicator Status SolutionNo sound or faint sound Receiver RF LED on • Verify all sound system connections or adjust gain as needed (see Adjusting Gain)• Verify that the receiver is connected to mixer/amplifierReceiver RF LED off • Turn on transmitter• Make sure the batteries are installed correctly• Link transmitter and receiver (see Linking topic)• Charge or change transmitter batteryReceiver LCD screen off • Make sure AC adapter is securely plugged into electrical outlet.• Make sure receiver is powered on.Transmitter indicator LED flashing red Charge or change transmitter batteryTransmitter plugged into charger. Disconnect transmitter from charger.Audio artifacts or dropouts rf LED flickering or off • Change receiver and transmitter to a different group and/or channel.• Identify nearby sources of interference (cell phones, Wi-Fi access points, signal processor, etc...) and shutdown or remove source.• Charge or changer transmitter battery• Ensure that receiver and transmitter are positioned within system parameters• System must be set up within recommended range and receiver kept away from metallic surfaces. • Transmitter must be used in line of sight from receiver for optimal soundDistortion OL indicator appears on receiver LCD Reduce transmitter gain (see Gain Adjustment).Sound level variations when switching to different sourcesN/A Adjust transmitter gain as necessary (see Gain Adjustment).Receiver/transmitter won't turn offTransmitter LED flashing rapidly Controls locked. See Locking and Unlocking Controls.Receiver gain control can-not be adjustedN/A Check transmitter. Transmitter must be on to enable gain changes.Receiver controls cannot be adjustedLK shown on receiver display when but-tons are pressedControls locked. See Locking and Unlocking Controls.Transmitter ID function does not respond.Transmitter LED flashes green 3 times Controls locked. See Locking and Unlocking Controls.Transmitter information does not appear on the Receiver LCDN/A Linked transmitter is off or the receiver is not linked to a transmitter.Transmitter powers off af-ter 1 hour.Transmitter status LED off GLX-D transmitters automatically power-off after 1 hour to conserve battery life if the signal from a linked receiver is not detected. Make sure that linked receiver is turned on.Resetting ComponentsResetting the ReceiverRestores the receiver to the following factory settings:• Gain level = default• Controls = unlockedPress and hold the link button while turning on the receiver power until the LCD displays RE. Note: When reset is complete, the receiver will automatically initiate linking to search for a transmitter. Press and hold the transmitter link button within five seconds of powering-on to complete the link.Resetting the Transmitter Restores the transmitter to the following factory settings:• Controls = unlockedPress and hold the transmitter link button while turning on the transmitter until power LED goes off.When the link button is released, the transmitter will automatically initiate linking to find an available receiver. Press the link button on an available receiver to relink.Use the reset function if it is necessary to restore the transmitter or receiver to their factory settings.DRAFT 3.4.13
14SpecificationsGLXD1Dimensions90.4 x 64.5 x 22.9 mm (3.56 x 2.54 x 0.90 in.), H x W x D (without antenna)Power Requirements3.7 V Rechargeable Li-IonHousingCast Metal, Black PowdercoatInput Impedance900 kΩRF Output Power10 mW E.I.R.P. maxTransmitter InputConnector4-Pin male mini connector (TA4M)ConfigurationUnbalancedMaximum Input Level1 kHz at 1% THD+8.4 dBV (7.5 Vp-p)Tuning Bandwidth2400–2483.5 MHzAntenna TypeInternal MonopolePin AssignmentsTA4M1ground (cable shield)2+ 5 V Bias3audio4Tied through active load to ground (On instrument adapter cable, pin 4 floats)Working Range60 m (200 ft) typicalNote: Actual range depends on RF signal absorption, reflection and interference.Transmit ModeFrequency HoppingAudio Frequency Response20 Hz – 20 kHzDynamic Range120 dB, A-weightedLatencyTotal Harmonic Distortion0.2%, typicalRF Output Power10 mW E.I.R.P. maxOperating Temperature Range-18°C (0°F) to 57°C (135°F)Note: Battery characteristics may limit this range.Storage Temperature Range-29°C (-20°F) to 74°C (165°F)PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high imped-ance 1/4-inch output.Battery LifeUp to 16 hoursRF Sensitivity-88 dBm, typicalDRAFT 3.4.13
15Dimensions46 x 95 x 133 mm (1.8 x 3.7 x 5.2 in.), H x W x DWeight504 g (17.8 oz.) HousingCast Metal, Black PowdercoatPower Requirements9 to 15 V DC (negative ground), 250 mASpurious Rejection>35 dB, typicalGain Adjustment Range-20 to 40 dB in 1 dB stepsConfiguration6.35 mm (1/4") output Impedance balancedImpedance6.35 mm (1/4") output 100 Ω(50 Ω, Unbalanced)Maximum Audio Output Level6.35 mm (1/4") connector (into 3 kΩ load) +8.5 dBVGLXD6Pin Assignments6.35 mm (1/4") connector Tip=audio, Ring=no audio, Sleeve=groundReceiver Antenna InputImpedance50 ΩAntenna Type½ Wave Sleeve Dipole, non-removableMaximum Input Level−20 dBmOutput Connections50 Ω50 Ω 22 µF22µFDRAFT 3.4.13
16CertificationsThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Meets requirements of the following standards: EN 300 328, EN 301 489 Parts 1 and 9, EN60065. Meets essential requirements of the following European Directives: • R&TTE Directive 99/5/EC• WEEE Directive 2002/96/EC, as amended by 2008/34/EC • RoHS Directive 2002/95/EC, as amended by 2008/35/EC Note: Please follow your regional recycling scheme for batteries and electronic wasteCertified by IC in Canada under RSS-210 and RSS-GEN. IC: 616A-GLXD1, 616A-GLXD6 Certified under FCC Part 15. FCC ID: DD4GLXD1, DD4GLXD6 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit www.shure.com The CE Declaration of Conformity can be obtained from: www.shure.com/europe/complianceAuthorized European representative:Shure Europe GmbHHeadquarters Europe, Middle East & AfricaDepartment: EMEA ApprovalJakob-Dieffenbacher-Str. 1275031 Eppingen, GermanyPhone: 49-7262-92 49 0Fax: 49-7262-92 49 11 4Email: EMEAsupport@shure.deInformation to the userThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.DRAFT 3.4.13
17PT. GOSHEN SWARA INDONESIAKompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat2013 Shure IncorporatedI.16.GSI31.00501.0211Europe, Middle East, Africa:Shure Europe GmbH Jakob-Dieffenbacher-Str. 12,75031 Eppingen, GermanyPhone: 49-7262-92490Fax: 49-7262-9249114Email: info@shure.deDRAFT 3.4.13

Navigation menu