Shure orporated MX690H19 Non-Broadcast Base Station Transmitter User Manual Exhibit D Users Manual per 2 1033 c3

Download:
Mirror Download [FCC.gov]
Document ID	3066621
Application ID	8IDFxxJN3MAPRuwtW1IfVw==
Document Description	Exhibit D Users Manual per 2 1033 c3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	64kB (799994 bits)
Date Submitted	2016-07-18 00:00:00
Date Available	2016-07-18 00:00:00
Creation Date	2016-06-23 15:14:46
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-06-23 15:14:52
Document Title	Exhibit D Users Manual per 2 1033 c3
Document Creator	Adobe InDesign CC 2015 (Windows)

MX690 MX890
Battery
MX890
>25 cm
MX890 Wireless Desktop Base
>150 cm
MX690
The Shure MX890 desktop base for MX405,
MX410 and MX415 gooseneck microphones
offers cable-free installation for corporate
boardrooms or other applications requiring flexible microphone configurations and
MX415 miniature gooseneck microphones
are suitable for boardrooms and other sites
where aesthetics are important. The MX890
operates within the 518–937 MHz band and is
compatible with Shure SLX wireless systems.
MX690 Wireless Boundary Microphone
The Shure MX690 microphone offers cable-free
installation for corporate boardrooms or other
applications requiring flexible configurations.
The MX690 operates within the 518–937 MHz
band and is compatible with Shure SLX wireless systems.
Receiver
Make sure the receiver is within sight of the transmitter. Do not place receiver
behind a metal barrier or any reflective surface.
1. Open the battery compartment as shown.
30 m (100 ft)
Hold the PUSH button and press the SELECT button. (Test the microphone to
confirm the change.)
Hold
2. Insert two 1.5 V "AA" batteries. Make sure the +/– terminals are properly oriented.
Note: Alkaline batteries last up to 8 hours. Rechargeable, carbon-zinc,
and zinc-chloride batteries provide less operating time.
To change between push-to-talk and push-to-mute:
1. Set the button for momentary operation.
Refer to the SLX Wireless System User Guide for more information, or
visit www.shure.com.
2. Hold the SELECT button and press the PUSH button.
Hold
Power Meter
The battery meter on the LCD shows remaining battery life.
Power On/Off
2. To turn off the transmitter, press and hold the ON/OFF button for approximately 2 seconds. Release the button when the LCD screen is blank. The LEDs on the outside of
the microphone will also go dark.
Mute Indicator
MX890
1. With the battery door open, press and hold the ON/OFF button for approximately 2
seconds. Release the button when the LCD screen illuminates.
Note: To power on the transmitter without opening the battery compartment, press and hold the plastic ON/OFF button on the battery door for
approximately 2 seconds, then release it.
Features
Installation
To change between toggle and momentary:
The desktop base illuminates the gooseneck microphone LED to indicate
whether the microphone is active or muted. Refer to the following table:
Low Power Indicator
Steady Red: Power low. Replace batteries immediately
Pulsing Red: Batteries dead. Transmitter cannot be turned on until batteries
are replaced.
MX890 Status Indicator
Microphone
Status
MX405 / MX410
Indicator
MX405R / MX410R Light
Ring
Active
Green
Red
Muted
Red/Flashing Green*
Off/Flashing*
• Sleek, low profile design
• Frequency agile, microprocessor controlled transmitter
• IR link to SLX receiver for automatic frequency synchronization
• Programmable frequency Group/Channel display
• Programmable mute function
• Operates on two AA batteries
• Compatible with all Shure SLX Wireless systems
• MX890 Supports Shure MX405, MX410 and MX415 Mini Gooseneck
Microphones
• Commshield® technology for protection from RF interference
MX890 Connecting Gooseneck
1. Align the pin on the microphone flange with the slot on the desktop base.
The mute button can be configured for toggle or momentary operation.
2. Insert the gooseneck into the desktop base and lock it in place by rotating the gooseneck sleeve clockwise.
Toggle (as supplied)
Placement
The PUSH button toggles the microphone between active and muted states.
Note: The microphone always powers up in the active state.
MX890 Microphone Placement
Place the MX890 no more than 25 cm (1 ft.) from the edge of the table. Aim
the microphone toward the talker and away from loudspeakers and noise
sources. Use one microphone for each talker. Pickup angle with a cardioid
cartridge is 130° at –3 dB. Pickup angle with a supercardioid cartridge is 115°
at –3 dB.
Note: To minimize RF interference, maintain a distance of at least 0.3
m (1 ft.) between transmitters. In case of interference, increase the distance between transmitters or change channels.
MX690 Microphone Placement
Place the MX690 within 1.5 m (5 ft.) of a talker. Aim the microphone toward the
talkers and away from loudspeakers and noise sources. Use one microphone
for every two talkers. Pickup angle with a cardioid cartridge is 130° at –3 dB.
Note: To minimize RF interference, maintain a distance of at least 0.3
m (1 ft.)
©2016 Shure Incorporated
27EN16692 (Rev. 5)
Mute Button
Printed in U.S.A.
Momentary
There are two types of momentary operation:
Low-Cut Filter
The low-cut filter attenuates frequencies below 150 Hz by 6 dB per octave.
Filter disabled (as supplied)
Low-cut filter
Push-to-Mute: The microphone is muted only while the button is pressed
and held.
Push-to-Talk: The microphone is active only while the button is pressed and
held.
*To toggle between off and flashing, press PUSH and ON/OFF simultaneously.
MX690
The bi-color LED on the top of the microphone indicates whether the microphone is active or muted.
The LED can also be set to flash when muted.
MX690 Status Indicator
Display Mode
Status Indicator
Steady (as supplied)
Active = Green
Muted = Red
Flashing
Active = Green
Muted = Flashing Green
Locking Settings
Press ON/OFF and SELECT simultaneously to lock or unlock transmitter settings. When locked, the current settings cannot be manually changed.
Note: Locking the transmitter settings does not disable IR frequency
synchronization or the High Pass/Low Cut filter.
• If necessary, reposition the receiver or decrease the distance between
transmitter and receiver.
• Remove local sources of RF interference, such as computers or lighting
equipment.
• Remove metal objects within 0.3 m (1 ft.) of the transmitter
Note: Refer to the SLX Wireless System User Guide for complete
troubleshooting procedures.
Frequency Selection
Shure offers wireless systems in a selection of bands that conform to the different government regulations of specific nations or geographic regions. These
regulations help limit radio frequency (RF) interference among different wireless devices and prevent interference with local public communications channels, such as television and emergency broadcasts.
Logic Mode
To use with a logic enabled receiver, you must perform an automatic sync.
The LCD flashes "log" during sync. Once in logic mode, the LCD flashes
"log" when powered up.
The system's band and frequency range are identified on the receiver and
transmitter. For example, "H4 518-578 MHz."
For information on bands available in your area, consult your local dealer or
phone Shure. More information is also available at www.shure.com.
Certifications
Certified under FCC Part 74.
Certified by IC in Canada under RSS-102 and RSS-210.
FCC: DD4MX690G4, DD4MX690G5, DD4MX690H5, DD4MX690H19,
DD4MX690J3, DD4MX890G4, DD4MX890G5, DD4MX890H5,
DD4MX890H19, DD4MX890J3. IC: 616A-MX690H5, 616A-MX690H19,
616A-MX690J3, 616A-MX890H5, 616A-MX890H19, 616A-MX890J3.
Automatic Frequency Synchronization
1. Power off all transmitters.
2. Begin with the first transmitter. Open the battery cover and power it on.
3. Begin with the first transmitter. Open the battery cover and power it on.
4. Aim the IR sensor at the first receiver IR port. The transmitter should be no more
than 15 cm (6 in.) from the receiver. Press and hold the receiver SYNC button to send
group and channel data to the transmitter. The red LED on the transmitter will stop
flashing when programming is complete.
5. Power off the first transmitter and repeat the synchronization with each additional
transmitter and receiver pair.
Manual Frequency Synchronization
1. Press and hold the transmitter SELECT button until the desired group number
appears.
2. Press SELECT again and release it when the desired channel number appears.
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/
europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: info@shure.de
Important Product Information
LICENSING INFORMATION
• Avoid placing laptop computers or other obstructions in front of the
microphone during use.
Licensing: A ministerial license to operate this equipment may be required
in certain areas. Consult your national authority for possible requirements.
Changes or modifications not expressly approved by Shure Incorporated could
void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on
the user’s classification and application, and on the selected frequency. Shure
strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
Troubleshooting
This device operates on a no-protection no-interference basis. Should the user
seek to obtain protection from other radio services operating in the same TV
bands, a radio licence is required. Please consult Industry Canada's document
CPC-2-1-28, Optional Licensing for Low-Power Radio Apparatus in the TV
Bands, for details.
• Make sure both the transmitter and the receiver are turned on.
Transmitters must be installed to provide a minimum separation distance of 20
cm from all persons.
Tips for Optimum Performance
• Maintain a direct line of sight between the transmitter and receiver
antennas.
• Avoid placing the transmitter on metal surfaces.
• Only use with a Shure SLX4L wireless receiver.
If you encounter difficulty with the SLX Wireless System
• Replace the battery if the battery LED is red.
• Make sure the Group/Channel settings for each transmitter-receiver pair are
identical.
• Make sure there is an unobstructed line of sight between the transmitter and
receiver.
Australia Warning for Wireless
This device operates under an ACMA class licence and must comply with all the conditions of that
licence including operating frequencies. Before 31 December 2014, this device will comply if it is operated in the 520-820 MHz frequency band. WARNING: After 31 December 2014, in order to comply, this
device must not be operated in the 694-820 MHz band.
Specifications
Frequency Range
Band
Frequency Range ( MHz)
G4
470 to 494
G5
494 to 518
H5
518 to 542
H19
542 to 572
Modulation
FM, 45 kHz max. deviation
J3
572 to 596
Power Requirements
2 LR6 AA batteries, 1.5 V, alkaline
P4
702 to 726
Q4
740 to 752
R13
794 to 806
R5
800 to 820
JB
806 to 810
S6
838 to 865
X4
925 to 932
X7
925 to 937.5
Working Range
Line of Sight
30 m (100 ft)
Note: Actual range depends on RF signal absorption, reflection and interference.
Frequency Stability
±10 ppm
Power Consumption
@3 V
Display backlight on
220 mA, ±30 mA
Display backlight off
175 mA, ±30 mA
Power Consumption (X4, X7)
@3 V
Display backlight on
245 mA, ±30 mA
Display backlight off
200 mA, ±30 mA
Note: Frequency bands might not be available for sale or authorized for
use in all countries or regions.
Battery Life
>8 hours (alkaline)
IMPORTANT SAFETY INSTRUCTIONS
Operating Temperature Range
-18°C (0°F) to +57°C (135°F)
1.
READ these instructions.
Note: Battery characteristics may limit this range.
2.
KEEP these instructions.
Dimensions
43 mm x 87 mm x 148 mm (H x W x D)
3.
HEED all warnings.
4.
FOLLOW all instructions.
5.
DO NOT use this apparatus near water.
6.
CLEAN ONLY with dry cloth.
7.
DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in
accordance with the manufacturer’s instructions.
8.
DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product.
9.
DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
Weight
MX690
MX890
Net
319 g (11.2 oz.)
312 g (11 oz.)
Packaged
516 g (18.2 oz.)
530 g (18.7 oz.)
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such
as vases, on the apparatus.
16. The MAINS plug or an appliance coupler shall remain readily operable.
17. The airborne noise of the Apparatus does not exceed 70dB (A).
18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective
earthing connection.
19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
21. Operate this product within its specified operating temperature range.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel. The safety certifications do not apply when the
operating voltage is changed from the factory setting.
WARNING: This product contains a chemical known to the State of California to cause cancer
and birth defects or other reproductive harm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19
Create Date                     : 2016:06:23 15:14:46-05:00
Metadata Date                   : 2016:06:23 15:14:52-05:00
Modify Date                     : 2016:06:23 15:14:52-05:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:106733db-a7e1-49ab-a88b-95aecac65cd0
Original Document ID            : xmp.did:189358149373E111B53A8D66BBDC1019
Document ID                     : xmp.id:57170904-9cb7-364a-ba9b-85595e2e407d
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:85546258-354c-a947-acfa-04fb11ecc5f6
Derived From Document ID        : xmp.did:5ED4D4CBD06BE211BD308E647E6F8601
Derived From Original Document ID: xmp.did:189358149373E111B53A8D66BBDC1019
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:06:23 15:14:46-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2015 (Windows)

EXIF Metadata provided by EXIF.tools