Shure orporated MX890G4 Wireless Microphone Transmitter User Manual use guide

Download:
Mirror Download [FCC.gov]
Document ID	933726
Application ID	g3wazJFRM93UV+x/RlnGfA==
Document Description	use guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.88kB (1085987 bits)
Date Submitted	2008-04-27 00:00:00
Date Available	2008-04-28 00:00:00
Creation Date	2007-07-20 13:55:10
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2008-04-23 16:54:50
Document Title	use guide
Document Creator	Adobe InDesign CS2 (4.0.2)

DRAFT
Model MX890
Wireless Desktop Base
The Shure MX890 desktop base for MX405 and MX410
gooseneck microphones offers cable-free installation for
corporate boardrooms or other applications requiring flexible
microphone configurations. The MX890 operates within the
518–865 MHz bands and is compatible with Shure SLX wireless
systems.
©2007, Shure Incorporated
27EN3253 (Rev. 1)
Printed in U.S.A.
Features
•
•
•
Sleek, low profile design
•
•
•
•
•
Programmable frequency Group/Channel display
•
DRAFT
Frequency agile, microprocessor controlled transmitter
IR link to SLX receiver for automatic frequency
synchronization
Programmable mute function
Operates on two AA batteries
Compatible with all Shure SLX Wireless systems
Supports Shure MX405 and MX410 Mini Gooseneck
Microphones
Commshield™ technology for protection from RF interference
DRAFT
Microphone Placement
Place the MX890 no more than 25 cm (1 ft.) from the edge of
the table. Aim the microphone toward the talker and away from
loudspeakers and noise sources. Use one microphone for each
talker. Pickup angle with a cardioid cartridge is 130° at –3 dB.
Pickup angle with a supercardioid cartridge is 115° at –3 dB.
Note: To minimize RF interference, maintain a distance of at
least 0.3 m (1 ft.) between transmitters. In case of interference,
increase the distance between transmitters or change channels.
130º
Receiver
Make sure the receiver is within sight of the transmitter. Do not
place receiver behind a metal barrier or any reflective surface.
Refer to the SLX Wireless System User Guide for more
information, or visit www.shure.com.
30m (100ft)
DRAFT
Connecting Gooseneck
1. Align the pin on the microphone
flange with the slot on the desktop
base.
2. Insert the gooseneck into the
desktop base and lock it in place
by rotating the gooseneck sleeve
clockwise.
Low-Cut Filter
The low-cut filter attenuates frequencies
below 150 Hz by 6 dB per octave.
Filter disabled (as supplied)
Low-cut filter
DRAFT
Battery
Installation
1. Open the battery compartment
as shown.
2. Insert two1.5V “AA” batteries.
Make sure the +/– terminals
are properly oriented.
Note: Alkaline batteries last up to
8 hours. Rechargeable, carbonzinc and zinc-chloride batteries
provide less operating time.
Power Meter
The battery meter on the
LCD shows remaining
battery life.
Low Power Indicator
Steady Red: Power
low. Replace batteries
immediately
Pulsing Red: Batteries
dead. Transmitter cannot be
turned on until batteries are
replaced.
Power On/Off
DRAFT
1. Press and hold the ON/OFF PROGRAM button for
approximately 2 seconds. The LCD illuminates.
2. To turn the transmitter off, press and hold the ON/OFF
PROGRAM button again.
Note: Use the button on the bottom of the transmitter to power it
on without opening the battery compartment.
DRAFT
Mute Button
The mute button can be configured for toggle or momentary
operation.
Toggle (as supplied)
The PUSH button toggles the microphone between active and
muted states.
NOTE: The microphone always powers up in the active state.
Momentary
There are two types of momentary operation:
Push-to-Mute: The microphone is muted only while the button is
pressed and held.
Push-to-Talk: The microphone is active only while the button is
pressed and held.
To change between toggle and momentary:
Hold the PUSH button and
Hold
press the SELECT button.
(Test the microphone to
confirm the change.)
To change between push-to-talk and push-to-mute:
1. Set the button for
momentary operation.
Hold
2. Hold the SELECT button
and press the PUSH button.
DRAFT
Mute Indicator
The desktop base illuminates the gooseneck microphone LED to
indicate whether the microphone is active or muted.
Refer to the following table:
Microphone
Status
MX405 / MX410
Indicator
MX405R / MX410R
Light Ring
Active
Green
Red
Muted
Red/Flashing Green*
Off/Flashing*
*To toggle between off and flashing, press PUSH and ON/OFF
PROGRAM simultaneously.
0R
DRAFT
Locking Settings
Press ON/OFF PROGRAM and
SELECT simultaneously to lock
or unlock transmitter settings.
When locked, the current
settings cannot be manually
changed.
Note: Locking the transmitter
settings does not disable IR
frequency synchronization or
the High Pass/Low Cut filter.
LOGIC MODE
To use with a logic enabled
receiver, you must perform
an automatic sync. The LCD
flashes “log” during sync. Once
in logic mode, the LCD flashes
“log” when powered up.
DRAFT
Automatic Frequency Synchronization
1. Power off all transmitters.
2. Power on all receivers.
3. Begin with the first transmitter. Open the battery cover and
power it on.
4. Aim the IR sensor at the first receiver IR port. The transmitter
should be no more than 15 cm (6 in.) from the receiver. Press
and hold the receiver SYNC button to send group and channel
data to the transmitter. The red LED on the transmitter will stop
flashing when programming is complete.
5. Power off the first transmitter and repeat the synchronization
with each additional transmitter and receiver pair.
Manual Frequency Synchronization
1. Press and hold the transmitter SELECT button until the desired
group number appears.
2. Press SELECT again and release it when the desired channel
number appears.
10
DRAFT
Tips for Optimum Performance
•
•
•
•
Maintain a direct line of sight between the transmitter and
receiver antennas.
Avoid placing the transmitter on metal surfaces.
Avoid placing laptop computers or other obstructions in front
of the microphone during use.
Only use with a Shure SLX4 wireless receiver.
Troubleshooting
If you encounter difficulty with the SLX Wireless System:
•
•
•
Make sure both the transmitter and the receiver are turned on.
•
Make sure there is an unobstructed line of sight between the
transmitter and receiver.
•
•
•
Replace the battery if the battery LED is red.
Make sure the Group/Channel settings for each transmitterreceiver pair are identical.
If necessary, reposition the receiver or decrease the distance
between transmitter and receiver.
Remove local sources of RF interference, such as computers
or lighting equipment.
Remove metal objects within 0.3 m (1 ft.) of the transmitter
Note: Refer to the SLX Wireless System User Guide for
complete troubleshooting procedures.
11
DRAFT
Frequency Selection
Shure offers wireless systems in a selection of bands that
conform to the different government regulations of specific
nations or geographic regions. These regulations help limit radio
frequency (RF) interference among different wireless devices and
prevent interference with local public communications channels,
such as television and emergency broadcasts.
The system’s band and frequency range are identified on the
receiver and transmitter. For example, “H4 518-578 MHz.”
For information on bands available in your area, consult your
local dealer or phone Shure. More information is also available at
Shure’s website (www.shure.com).
Licensing
Licensing of Shure wireless microphone equipment is the
user’s responsibility, and licensability depends on the user’s
classification and application, and on the selected frequency.
Shure strongly urges the user to contact the appropriate
telecommunications authority concerning proper licensing, and
before choosing and ordering frequencies.
Changes or modifications not expressly approved by Shure
Incorporated could void your authority to operate this equipment.
12
DRAFT
Frequency Bands
Band
Range
Output
H5
518–542 MHz
10 mW
J3
572–596 MHz
10 mW
L4
638–662 MHz
10 mW
P4
702–726 MHz
10 mW
R13
794–806 MHz
10 mW
R5
800–820 MHz
10 mW
S6
838–865 MHz
10 mW
JB
806–810 MHz
10 mW
Q4
740–752 MHz
10 mW
Note: This radio apparatus may be capable of operating on some
frequencies not authorized in your region. Please contact your
national authority to obtain information on authorized frequencies
for wireless microphone products in your region.
13
DRAFT
Master List Frequencies
The Master List is an index of all frequencies in a band, including
those not assigned to a Group or Channel. The Master List can
only be accessed through the receiver, so the transmitter must
be synchronized via the IR port. When a Master List frequency is
in use, “MASTER LIST” appears on the display. Refer to the SLX
Wireless System User Guide for more information.
Note: Wireless devices such as cellular phones and two-way
radios may interfere with wireless microphones. Keep these and
other potential sources of interference away from the transmitters
and receivers.
14
DRAFT
Transmitter Specifications
Operating Range
30 m (100 ft.)
Note: Actual range depends on RF signal absorption,
reflection, and interference
Frequency Stability
±10 ppm
Maximum Frequency Deviation
45 kHz
Oscillator Type
Phase-locked loop (PLL) controlled synthesizer
Power Requirements
3V (2 AA alkaline or rechargeable batteries)
Battery Life
≥8 hours (alkaline)
Power Consumption
130 mA, 15 mA
Operating Temperature Range
-18–57 °C (0–135 °F)
Note: Battery may limit this range
Dimensions
43 mmH x 87 mmW x 148 mmD (1 11/16 x 3 3/8 x 5 13/16 in.)
Weight
Net: 312 g (11 oz)
Packaged: 530 g (18.7 oz)
15
DRAFT
Microphone Specifications
Note: See gooseneck microphone guide for acoustic
specifications.
16
DRAFT
Certification
Certified to FCC Part 74 (FCC ID: DD4MX890).
Certified by IC in Canada under RSS-123 and RSS-102
(IC: 616A-MX890).
Meets essential requirements of the European R&TTE Directive
99/5/EC (ETSI EN 300-422 Parts 1 & 2, EN 301 489 Parts 1 & 9)
and eligible to carry the CE marking.
Changes or modifications not expressly approved by Shure
Incorporated could void your authority to operate this equipment.
17
DRAFT
EU Declaration of Conformity
EU DECLARATION OF CONFORMITY
We,
of
Shure Incorporated
5800 Touhy Avenue
Niles, Illinois, 60714-4608 U.S.A.
Phone: (847) 600-2000
Web: www.Shure.com
Declare under our sole responsibility that the following product
Model: MX890
Description: Wireless Microphone Transmitter
conforms to the essential requirements and other relevant previsions of the R&TTE
Directive (1999/5/EC).
The product complies with the following product family, harmonized or national
standards:
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-9 V1.2.1 (2002-08)
EN 300 422-1 V1.2.2 (2000-08)
EN 300 422-2 V1.1.1 (2000-08)
The technical documentation is kept at:
Shure Incorporated, Corporate Quality Engineering Division
SHURE Europe GmbH, EMEA Approval
Manufacturer: Shure Incorporated
Signed: __________________________________ Date: 20 December 2006
Name and Title: Craig Kozokar, EMC Project Engineer, Corporate Quality Engineering
Division
European Representative: SHURE Europe GmbH
18
Signed: __________________________________ Date: 20 December 2006
Name and Title: Wolfgang Bilz, Dipl. Ing. (FH), EMEA Approval
SHURE Europe GmbH
Headquarters Europe, Middle East & Africa
Wannenäcker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 - (0)7131 - 7214 - 0
Fax: +49 - (0)7131 - 7214 - 14
DRAFT
19
DRAFT
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
About                           : uuid:a0e2f52f-4a3f-4bfc-b36c-4177cfcd9b27
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Create Date                     : 2007:07:20 13:55:10-05:00
Modify Date                     : 2008:04:23 16:54:50-05:00
Metadata Date                   : 2008:04:23 16:54:50-05:00
Creator Tool                    : Adobe InDesign CS2 (4.0.2)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6420 bytes, use -b option to extract)
Instance ID                     : uuid:073c5cb0-486e-4eb1-914f-b18db41e9534
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:b8a96daa-36ee-11dc-bcaa-8737c84ef489
Derived From Instance ID        : 4e0fd5ea-093a-11dc-9f60-abaa3ab85bf4
Derived From Document ID        : adobe:docid:indd:93237d55-e44f-11db-9a20-e84a4f4a3457
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:d346cf96-f786-4cc7-987e-cfb0f4793c40, uuid:0d21a716-7da9-4ad6-a95d-a7ce5ad4b62d, uuid:80b95885-c387-438e-9f5d-500e15cbde7e, uuid:e5eb8f03-3ea5-4d40-9905-a1722f80d62a, uuid:e5eb8f03-3ea5-4d40-9905-a1722f80d62a, uuid:ada07300-823b-4b68-82af-f6a2b80fd81e, uuid:ada07300-823b-4b68-82af-f6a2b80fd81e, uuid:ada07300-823b-4b68-82af-f6a2b80fd81e, uuid:ada07300-823b-4b68-82af-f6a2b80fd81e, uuid:b8cbfbd8-aafe-4b29-8ec4-131a84d044d6, uuid:1a82be20-ca2b-4942-91a5-47001c2db621, uuid:ec041983-e566-4a06-9d57-29b4626bf67d, uuid:e2340da6-8536-4b50-8daa-36e956691dc3, uuid:cf0109fc-62fc-4302-b23e-8a303cd10a5b, uuid:1ed4111a-516f-4221-b17b-8d27b77e37f1, uuid:c6ec9d7d-a147-4491-9517-92043b1be4f8, uuid:6e9ecef9-d4eb-4cf7-a70b-5e6bc5707f20, uuid:6e9ecef9-d4eb-4cf7-a70b-5e6bc5707f20, uuid:c6ec9d7d-a147-4491-9517-92043b1be4f8, uuid:ada07300-823b-4b68-82af-f6a2b80fd81e, uuid:19f87284-b631-40ba-9088-fd21a95ecf93, uuid:d346cf96-f786-4cc7-987e-cfb0f4793c40, uuid:49e2a1de-5397-40f7-a158-1e58d05c8398
Manifest Reference Document ID  : uuid:49EF746AF368DB11BF97F207A20E05E8, uuid:D3FA3FA6B4C5DB11B352B0B11E52C1D3, uuid:43AC89FA53C3DB11AB11E519D432E5E5, uuid:46AC89FA53C3DB11AB11E519D432E5E5, uuid:46AC89FA53C3DB11AB11E519D432E5E5, uuid:76C68E822EC0DB11A755F59EF5D3476E, uuid:76C68E822EC0DB11A755F59EF5D3476E, uuid:76C68E822EC0DB11A755F59EF5D3476E, uuid:76C68E822EC0DB11A755F59EF5D3476E, uuid:4A7806642DC1DB11A30586B77A047B33, uuid:4C7806642DC1DB11A30586B77A047B33, uuid:D8A471D2FABDDB119BAAE7623F52ADF0, uuid:78926D1CD2BDDB119BAAE7623F52ADF0, uuid:6FEEAAB758C0DB11A755F59EF5D3476E, uuid:B1B4D0C4CBDBDB11BCDD9B1D4A765690, uuid:A7F71C3601BEDB119BAAE7623F52ADF0, uuid:40AC89FA53C3DB11AB11E519D432E5E5, uuid:40AC89FA53C3DB11AB11E519D432E5E5, uuid:A7F71C3601BEDB119BAAE7623F52ADF0, uuid:76C68E822EC0DB11A755F59EF5D3476E, uuid:A12CB44577C7DB11851F9C729C2554BA, uuid:49EF746AF368DB11BF97F207A20E05E8, uuid:A1C6478F1FC8DB11AA94F1FB977AD001
Format                          : application/pdf
Page Count                      : 20
Creator                         : Adobe InDesign CS2 (4.0.2)

EXIF Metadata provided by EXIF.tools