Shure orporated PA821SWB Antenna Combiner User Manual PA821SWB en
Shure Incorporated Antenna Combiner PA821SWB en
user manual
Model PA821SWB User Guide A+B OUT A IN MAIN OUT INPUT SIGNAL B IN POWER EXPANSION POR 21SWB PA8 biner PSM Antenna Com 470-952 Mhz 50 OHMS ER ACTIVE COMBIN PSM® Antenna Combiner User Guide Guide de l'utilisateur du répartiteur d'antenne PSM Bedienungsanleitung für die Antennenweiche PSM Guía del usuario del combinador de antenas PSM Guida d'uso del combinatore di antenne PSM ©2008 Shure Incorporated 27A12135 (Rev. 1) Printed in U.S.A. ENGLISH ! IMPORTANT SAFETY INSTRUCTIONS ! 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. ONLY USE attachments/accessories specified by the manufacturer. 12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. The MAINS plug or an appliance coupler shall remain readily operable. The airborne noise of the apparatus does not exceed 70dB (A). Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. 14. 15. 16. 17. 18. 19. 20. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting. DESCRIPTION The Shure PA821SWB Antenna Combiners actively combine antenna outputs from up to eight PSM wireless transmitters to a single antenna, improving RF performance and reducing rack clutter. INSTALLATION Set the power switch on the front panel to OFF before installing. Connect the unit to an AC power source using the supplied power cable. Switch the power ON to use the device. The power light will illuminate. Power the unit OFF when not in use or before disconnecting the unit from the AC power source. PSM Transmitters 8-TO-1 COMBINING: 1. 2. 3. Using the supplied BNC-BNC cables, connect the ANTENNA OUTPUT of each transmitter to the ANTENNA INPUTS of the PA821SWB (Figure 2). Attach an antenna to the MAIN OUT of PA821SWB. For wideband applications, use PA805SWB directional antenna (Figure 1). Connect the PA821SWB to a power outlet using one of the supplied power cables. The PA821SWB contains a universal power supply to operate anywhere in the world. NOTE: When the PA821SWB is powered on, the input signal indicators (1-8) on the front panel will illuminate if an active transmitter is connected to the corresponding input (1-8) on the back panel (Figure 1). AC POWER FIGURE 2 FIGURE 1 ENGLISH SPECIFICATIONS FOR MORE THAN 8 TRANSMITTERS: 1. Using the supplied BNC-BNC cables, connect the ANTENNA OUTPUT of each transmitter to the ANTENNA INPUTS of the PA821SWB. 2. Use the 1 ft. jumper BNC-BNC cable to connect the MAIN OUTPUT of the PA821SWB to the A IN of the EXPANSION PORT. Connect another ANTENNA OUTPUT (from a ninth PSM transmitter, second PA821SWB or other antenna port) to the B IN of the EXPANSION PORT. Attach an antenna to the A + B OUT of the EXPANSION PORT. 3. 4. RF Carrier Frequency Range 470-952 MHz System Gain +0/-5 dB Input AC Line Voltage 100-240 Vac, 50/60 Hz Maximum Input Line VA 100 VA Maximum Current Drain 0.42-1.0 Amperes (Amperes = 100 VA/Input AC Line Voltage) Maximum RF Input Power 24 dBm (250 mW) per channel For wideband applications, use the PA805-SWB directional antenna, Figure 3. Input Signal Indicator Threshold +4 dBm (2.5 mW), +2 dBm (1.6 mW) typical Impedance 50 Ω nominal Operating Temperature Range 0° F (-18° C) to +135° F (+57° C) NOTE: Electrical safety approval is based on a maximum ambient temperature of 35°C. Overall Dimensions 43.4 mm high x 398.8 mm wide x331.5 mm deep (1 11/16 in. H x 15 11/16 in. W x 13 1/2 in. D) Net Weight 4.53 Kg (10 lbs unpackaged, without power and RF cables) Input/Output Connector Type BNC-type 8 input, 1 output ACTIVE 2 Inputs, 1 output EXPANSION PORT FURNISHED ACCESSORIES (8) 2 ft. Coaxial Cable (RG58C/U) .................................... UA802 1 ft Jumper..................................................................... 95E2035 120 VAC Power Line Cord............................................. 95A8389 230 VAC Power Line Cord............................................. 95A8247 240 VAC Power Line Cord (U.K.) .................................. 95A8713 50Ω BNC PSM Transmitters OPTIONAL ACCESSORIES Wideband Unidirectional Antenna (470-952 MHz) ....PA805SWB 10 ft. Coaxial Cable (RG-8X/U) ......................................... PA725 25 ft. Coaxial Cable (RG-8X/U) ........................................ UA825 50 ft. Coaxial Cable (RG-8X/U) ........................................ UA850 AC POWER FIGURE 3 ENGLISH CERTIFICATIONS PA821SWB: Certified to FCC Part 74 (FCC ID No. DD4PA821SWB). Certified in Canada by IC to RSS-123 AND RSS-102 (Certification No. IC: 616A-PA821SWB). UL LISTED to UL6500 (2nd Edition) and cUL LISTED to CAN/CSA E60065-00. Meets the Essential Requirements of the European R&TTE Directive 99/5/EC, eligible to bear CE mark. Meets EMC requirements of EN 301 489 Parts 1 and 9 and is GS-Certified to EN 60065 (6th Edition). Conforms to Australian EMC requirements, eligible to bear C-Tick mark (N108). N 108 LICENSING Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user's responsibility, and licensability depends on the user's classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. THIS RADIO EQUIPMENT IS INTENDED FOR USE IN PROFESSIONAL ENTERTAINMENT AND SIMILAR APPLICATIONS. NOTE: THIS EQUIPMENT MAY BE CAPABLE OF OPERATING ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGION Licensing: Note that a ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-702 About : uuid:78c8ec08-7a88-4c78-bc87-c37cd3915922 Producer : Acrobat Distiller 8.0.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:06:27 10:39:42-05:00 Create Date : 2008:06:25 16:24:11-05:00 Metadata Date : 2008:06:27 10:39:42-05:00 Document ID : uuid:422e23c6-2900-4420-826e-81449cb16f9e Instance ID : uuid:253180c6-e877-46f8-8b25-b0eb97d41211 Format : application/pdf Title : PA821SWB-en.fm Creator : oterog Has XFA : No Page Count : 4 Author : oterogEXIF Metadata provided by EXIF.tools