Shure orporated PG2 Non-Broadcast Transmitter Held to Face User Manual Regulatory Copy indd
Shure Incorporated Non-Broadcast Transmitter Held to Face Regulatory Copy indd
Exhibit D Users Manual per 2 1033 c3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 635290 |
| Application ID | cEZUhZbcIPur06pf/xVXvg== |
| Document Description | Exhibit D Users Manual per 2 1033 c3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 121.64kB (1520508 bits) |
| Date Submitted | 2006-03-10 00:00:00 |
| Date Available | 2006-03-10 00:00:00 |
| Creation Date | 2005-11-02 12:29:10 |
| Producing Software | Adobe PDF Library 6.0 |
| Document Lastmod | 2006-01-12 13:31:26 |
| Document Title | Regulatory Copy.indd |
| Document Creator | Adobe InDesign CS (3.0) |
Performance Gear Series Wireless English Shure Performance Gear Wireless Designed especially for performers who manage their own sound, Shure Performance Gear professional audio products deliver legendary Shure sound quality, stage-proven durability and hasslefree setup for worry-free performance. Performance Gear Wireless systems are available in a variety of configurations - for handheld, guitar, headset and presentation applications. Manual frequency selection and transmitter setup provide specific choice and precise control to locate the clearest channel, every time. System Components All systems include Internal Antenna Diversity PG4 receiver One 9 volt battery Power supply User guide Vocalist systems include Microphone Head PG2 handheld transmitter Microphone clip Lavalier, Headworn, and Instrument systems include PG1 body pack transmitter Microphone (choice of PG185, PG30) Guitar systems include PG1 bodypack transmitter 4-pin mini connector (TA4F) to 1/4” connector cable Patent numbers 6,597,301 and 6,296,565 English PG4 Receiver Features Figure 1. Front Panel audio LED Channel Display Indicates strength of incoming audio signal: green for normal, amber for strong, red for peak. See “System Setup” on page 6. ready LED Green LED indicates system is ready for use. channel button Press and hold to change the frequency channel. Figure 2. Back Panel AC adapter jack XLR balanced microphone output jack Adapter cord relief 1/4” unbalanced output jack English PG2 Handheld Transmitter Figure 3. Power/Mute Button Power/Mute LED (See LED status below) Channel Display (Display turns off after 10 seconds to conserve battery) Channel Button Battery Cover — Twist counter-clockwise to remove. Battery Compartment LED Status Signifies Green Ready Amber Mute is on Red Battery is low Flashing Red on startup Battery dead (must be replaced for transmitter to operate). Flashing Green and Red Controls are locked Flashing Amber and Red Mute is on and battery is low Changing Battery • Expected life for a 9 volt alkaline battery is approximately 8 hours. • When the Power/Mute LED glows red, the battery should be replaced immediately. Adjusting Gain • Access the Gain Adjustment Switch by unscrewing the microphone head. Use the tip of a pen or a small screwdriver to move the switch. (See fig. 4) • The switch can be positioned in two gain settings on the PG2: Gain Setting Suggested Uses 0dB For quiet to normal vocal performance. –10dB Use only if audio is distorted due to high vocal levels. Figure 4. English PG1 Bodypack Transmitter Figure 6. Figure 5. Battery Cover, pinch sides to fold open 4-Pin Microphone Input Jack Power/Mute Button. Press and hold to turn on/off. Press and release to mute/unmute. Power/Mute LED (see LED Status below) Antenna Channel Display Channel Button Gain Switch 9V Battery compartment Battery Cover. Pinch sides to fold open. LED Status Signifies... Green Ready Amber Mute is on Red Battery is low Flashing red on startup Battery dead (must be replaced for transmitter to operate). Flashing Green and Red Flashing Green and Red Flashing Amber and Red Mute is on and battery is low Wearing the Bodypack Transmitter • Clip the transmitter to belt or guitar strap as shown. If using a belt, slide the transmitter until the belt is pressed against the base of the clip. Changing Battery • • Expected life for a 9 volt alkaline battery is approximately 8 hours. When the Power/Mute LED glows red, the battery should be replaced immediately. Figure 7. Adjusting Gain • Three gain settings are available on the PG1: Gain Settings mic -10 Suggested Use Microphone Guitar Use only if audio is distorted due to high input level English System Setup Single Receiver Setup In any wireless setup, each transmitter and receiver pair must be tuned to the same frequency, or channel. Follow these steps to set the transmitter and receiver to the same channel: 1. 2. 3. 4. 5. 6. 7. 8. Plug in the receiver to turn power on. Turn transmitter power off. Press and hold the channel button on the receiver for about one second to enter select mode. Release the button as soon as the display begins flashing. Press the channel button while the number is flashing to change to the next channel *. To activate a newly selected channel, simply wait until the number stops flashing. Turn on the corresponding transmitter. Press and hold the channel button on the transmitter to enter select mode. Release the button as soon as the display begins flashing. Press the channel button while the number is flashing to change to the next channel. Scroll through the channels until the transmitter setting matches the channel on the receiver. The transmitter channel is set when the number stops flashing. The green “ready” LED on the receiver will indicate the system is ready for use. Figure 8. *Note: Some of the frequencies available on the PG4 receiver may be occupied by sources of interference such as broadcast television or other wireless devices. Use the Busy Indicator on the receiver channel display to avoid selecting an occupied channel while in select mode. Busy Indicator When selecting channels, if the display flashes between a number and a blank screen, the channel is clear. If the display flashes between a number and a dash as shown in Figure 9, the channel is busy. This means that the channel is occupied by another device or source of interference. In this case, it is recommended to select another channel. Figure 9. English Multiple System Setup To set up multiple systems, repeat the previous steps for each transmitter and receiver pair. Once transmitters have been set, leave them on. Be sure to set each transmitter and receiver pair to a different frequency. For information about frequencies and compatibility, refer to the guide below. TLPW Frequency and Channel Guide In each group, channels 1,3,5,7 and 9 are a compatible set and channels 2,4,6,8 and 0 are a compatible set. When operating multiple systems, select only odd or even numbered channels for best results. M10 674-686 R10 800-812 P11 702-714 Q11 740-752 CH Freq CH Freq CH Freq CH Freq 674.775 802.100 702.150 740.150 676.700 803.675 703.600 741.600 677.900 805.750 705.500 743.500 682.025 809.100 707.100 746.400 685.500 810.550 708.400 748.100 674.025 802.325 710.100 751.850 680.975 803.550 712.650 682.775 805.100 713.850 684.000 808.600 685.900 810.025 R11 770-782 R12 794-806 JB 806-810 CH Freq CH Freq CH Freq 770.150 794.150 806.125 771.600 797.500 806.375 773.500 799.100 807.125 775.100 800.400 807.750 776.400 802.100 809.000 778.100 805.850 809.500 780.650 781.850 H7 536 - 548 K7 590 - 602 M7 662-674 T10 CH Freq CH Freq CH Freq CH 854 - 865 Freq 536.050 590.050 662.050 854.900 542.050 596.050 668.050 856.575 537.400 591.400 663.400 857.950 543.400 597.400 669.400 861.750 539.175 593.175 665.175 863.900 545.175 599.175 671.175 855.275 540.375 594.375 666.375 857.925 546.375 600.375 672.375 861.550 541.975 595.975 667.975 863.200 547.975 601.975 673.975 864.500 Troubleshooting Issue LED Status Solution No sound or faint sound Transmitter Power/Mute LED on, receiver LEDs on • Perform transmitter setup (see page 6). • Verify all sound system connections. • Adjust transmitter gain. Receiver Channel Display • Make sure AC adapter is securely plugged into electrical outlet and into POWER connector on rear panel of receiver . • Make sure AC electrical outlet works and is supplying proper voltage. Transmitter LED glowing or flashing red • Replace transmitter battery. Transmitter LED off • Turn transmitter on. • Make sure the +/– indicators on battery match transmitter terminals. • Insert fresh battery. Distortion or unwanted noise bursts • Remove nearby sources of RF interference (CD players, computers, cell phones, digital effects, in-ear monitor systems, etc.) • Change receiver and transmitter to a different frequency. • Reduce transmitter gain. • Replace transmitter battery. • If using multiple systems, change the frequency of one of the active systems. Sound level different from cabled guitar or microphone, or when using different guitars • Adjust transmitter gain as necessary. Cannot turn transmitter on Transmitter LED flashing red • Replace transmitter battery. Locking and Unlocking Controls Locking the system controls prevents accidental muting or channel adjustment during performance. Transmitter To lock the controls: turn the transmitter off, hold the channel button down and turn the transmitter power on. The Power/Mute LED will alternate between red and green. To unlock the controls: with the transmitter on, hold the channel button down, and turn the transmitter off. English Specifications System PG1 Bodypack Transmitter PG2 Handheld Transmitter ���� PG4 Receiver Working Range 75m (250 ft.) Note: actual range depends on RF signal absorption, reflection, and interference. Audio Frequency Response Minimum: 45 Hz. Maximum: 15 kHz (overall system frequency depends on microphone element). Total Harmonic Distortion 0.5%, typical Ref. +/– 33 kHz deviation, 1 kHz tone Dynamic Range >100 dB A-weighted Operating Temperature Range –18°C (0°F) to +57°C (+135°F) Note: battery characteristics may limit this range Transmitter Audio Polarity Positive pressure on microphone diaphragm (or positive voltage to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output. Audio Input Level –10 dBV maximum at “mic” gain position +10 dBV maximum at 0dB gain position +20 dBV maximum at –10dB gain position Gain Adjustment Range 30 dB Input Impedance 1MΩ RF Transmitter Output 10 mW typical Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.) Weight 75 grams (2.6 oz.) without battery Housing Molded poly carbonate case Power Requirements One 9V alkaline battery Battery Life >8 hours (alkaline) Audio Input Level +2 dBV maximum at –10dB position –8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 10 mW typical Weight 218 grams (7.7 oz.) without battery Housing Molded PC/ABS handle and battery cup Power Requirements One 9V size alkaline or rechargeable battery Battery Life >8 hours (alkaline) Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.) Weight 241 grams (8.5 oz) Output Impedance XLR connector: 200 Ω Housing ABS 1/4 inch connector: 1kΩ Audio Output Level Ref. +/– 33 kHz deviation with 1 kHz tone XLR connector (into 600 Ω load): –19 dBV 1/4 inch connector (into 3000 Ω load): –5 dBV Sensitivity –105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply English Replacement Parts All Systems Microphone Stand Adapter (PGX2) WA371 System-Specific AC Adapter (120 VAC, 60 Hz) PS20 AC Adapter (230 VAC, 50/60 Hz, Europlug) PS20E AC Adapter (230 VAC, 50/60 Hz, UK) PS20UK AC Adapter (100 VAC, 50/60 Hz) PS20J AC Adapter (220 VAC, 50 Hz, China) PS20CHN PG58 Head with Grille RPW108 Belt Clip 44A8035 Universal Rack Tray URT 4-pin mini connector (TA4F) to 1/4” connector cable WA302 Optional 10 English Regulatory Information Regulatory Information for North America, Europe, and Australia PG1 & PG2 Transmitters: Certified to FCC Part 74 (FCC ID: “DD4PG1” and “DD4PG2”). Certified by IC in Canada under RSS-123 and RSS-102 (“IC: 616A-PG1” and “IC: 616A-PG2”). Meets the essential requirements of the European R&TTE Directive 99/5/EC (ETSI EN 300-422 Parts 1 & 2, EN 301 489 Parts 1 & 9) and are eligible to carry the CE marking. 0978 PG4 Receiver: Authorized under Declaration of Conformity (DoC) provision of FCC Part 15. Certified under Industry Canada to RSS-123 (“IC: 616A-PG4”). This class B digital apparatus complies with Canadian ICES-003. Meets the essential requirements of the European R&TTE Directive 99/5/ EC (EN 301 489 Parts 1 & 9, EN 300 422 Parts 1 & 2) and is eligible to carry the CE marking. Conforms to Australian EMC requirements and is eligible for C-Tick marking. N108 Z540 0978 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. PS 20 Series Power Supplies: Conform to Safety Standard IEC 60065. PS20E and PS20UK are eligible to bear CE marking. A ministerial license may be required to operate this equipment in certain areas. Consult your national authority for possible requirements. This radio equipment is intended for use in musical professional entertainment and similar applications. Caution: changes or modifications not expressly approved by Shure Incorporated for compliance could void the user’s authority to operate the equipment. Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 11 12 SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A. Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446 Europe, Middle East, Africa: Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific: Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 12 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:c6c8dee4-e652-4ea8-96ee-13bdb0b5775f Create Date : 2005:11:02 12:29:10Z Metadata Date : 2006:01:12 13:31:26-06:00 Modify Date : 2006:01:12 13:31:26-06:00 Creator Tool : Adobe InDesign CS (3.0) Rendition Class : proof:pdf Derived From Instance ID : 2ffa919c-4af4-11da-aa8e-a2ccb0b5a89e Derived From Document ID : adobe:docid:indd:4185bfc6-369c-11da-a0ea-be2907a18e74 Document ID : adobe:docid:indd:4a2bbde6-4bc3-11da-83da-fa83eebab964 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:8c109b63-1e54-4522-94dc-c5560df86659, uuid:dc82ffa6-bcab-4fe7-b011-ebfc095a8ee8, uuid:3ee921a3-3cbe-11da-8f1a-8a6b00dd1380, uuid:ee8b994b-3cbe-11da-a8e4-d57f34611560, uuid:bea3526a-58e5-42b1-8329-893163c2ac1d, uuid:bea3526a-58e5-42b1-8329-893163c2ac1d, uuid:3a01a2d2-f677-4a73-a06a-8bf4ce17acb5, uuid:32a7c842-0ec4-4076-97d3-c4c714bfce35, uuid:32a7c842-0ec4-4076-97d3-c4c714bfce35 Manifest Reference Document ID : adobe:docid:photoshop:2dc02677-f969-11d9-9de4-8d16259398ee, uuid:dbfb68de-4e15-4f28-b0ee-a155f985febf, adobe:docid:photoshop:3ee921a2-3cbe-11da-8f1a-8a6b00dd1380, adobe:docid:photoshop:ee8b994a-3cbe-11da-a8e4-d57f34611560, uuid:f4ca61e9-f585-41fe-9b9b-a0d6c33ae79e, uuid:f4ca61e9-f585-41fe-9b9b-a0d6c33ae79e, uuid:3c2d6d2f-806d-4d2b-8c36-f6c4e1c03a82, uuid:d38f9852-18df-418a-b80e-8845b36672ac, uuid:d38f9852-18df-418a-b80e-8845b36672ac Format : application/pdf Title : Regulatory Copy.indd Trapped : False Creator : Adobe InDesign CS (3.0) Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools