Shure orporated QLXD1J50 Licensed Non-Broadcast Transmitter Worn on Body User Manual Exhibit D Users Manual per 2 1033 c3
Shure Incorporated Licensed Non-Broadcast Transmitter Worn on Body Exhibit D Users Manual per 2 1033 c3
Exhibit D Users Manual per 2 1033 c3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2242492 |
| Application ID | DtsP302EkGvrsQ0oFg1XKw== |
| Document Description | Exhibit D Users Manual per 2 1033 c3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 398.11kB (4976393 bits) |
| Date Submitted | 2014-04-15 00:00:00 |
| Date Available | 2014-05-20 00:00:00 |
| Creation Date | 2014-03-10 11:51:09 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2014-03-10 11:51:36 |
| Document Title | Exhibit D Users Manual per 2 1033 c3 |
| Document Creator | Adobe InDesign CS6 (Windows) |
QLX-D Wireless System User Guide Shure Incorporated Confidential Please Note: The following document layout is preliminary to identify, organize, and prioritize content. All copy including titles, descriptions, photos, specifications, and artwork are not final at this time. This device is a prototype for testing purpose only. It is not intended to be placed on the market nor be sold. It shall be returned to the Shure Incorporated headquarters located in Niles, Illinois USA after testing. © 2013 Shure Incorporated 27A22351 (Rev. Preliminary) Printed in U.S.A. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product. DO NOT defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. ONLY USE attachments/accessories specified by the manufacturer. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance coupler shall remain readily operable. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. 21. Operate this product within its specified operating temperature range. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING • Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate. • Follow instructions from manufacturer • Only use Shure charger to recharge Shure rechargeable batteries • WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type. • Never put batteries in mouth. If swallowed, contact your physician or local poison control center • Do not short circuit; may cause burns or catch fire • Do not charge or use battery packs other than Shure rechargeable batteries • Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs. • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like Note: Use only with the included power supply or a Shure-approved equivalent. LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Information to the user This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Avoid operating mobile phones and mobile broadband devices near your wireless system to prevent the possibility of interference. Do Not Duplicate or Redistribute System Overview Shure QLX-D™ Digital Wireless delivers stunning performance with 24-bit digital audio clarity in a refined, compact design. Combining innovative features with simplified setup and easy operation, QLX-D offers outstanding wireless functionality for demanding live sound applications. Digital signal processing enables QLX-D to capture finely detailed audio over an extended 20 Hz to 20 KHz frequency range with virtually flat response and extremely wide dynamic range. Featuring all-metal construction, QLX-D systems come in a variety of options, from handheld transmitters with choice of legendary Shure microphone capsules to bodypack systems with headset or lavalier microphones. QLX-D is incredibly RF spectrum efficient, allowing up to 17 systems to operate simultaneously in a standard 6 MHz TV band (22 channels in 8 MHz TV band), and employs automatic channel scanning to quickly find open frequencies. Multiple systems can be networked together over Ethernet, enabling streamlined channel scanning across all receivers in a system and compatibility with Shure Wireless Workbench® control software for advanced frequency coordination. AES 256-bit encryption can be enabled for applications requiring secure transmission. Advanced lithium-ion rechargeablity options provide dramatic long-term cost savings and extended transmitter battery life when compared to alkaline batteries, with built-in battery metering that reports remaining runtime in hours and minutes. Stunning in its performance, QLX-D delivers the latest innovations in wireless technology excellence from Shure. Features • Transparent 24-bit digital audio • Ethernet networking for multiple receiver systems • Extended 20 Hz to 20 kHz frequency range • 120 dB dynamic range • Network channel scanning configures open frequencies for networked receivers • 60 available channels per frequency band (region dependent) • 256-bit AES encryption for secure transmission • 64 MHz tuning bandwidth (region dependent) • Compatible with Shure Wireless Workbench 6 control software • Up to 17 compatible systems per 6MHz TV band; 22 systems per 8 MHz band • Simple and easy-to-use interface • Automatic channel scan • Compatible with AA batteries or Shure SB900 rechargeable Lithium-ion battery • Easy pairing of transmitters and receivers over IR scan and sync • Compatible with external control systems such as AMX or Crestron • Professional-grade all-metal construction System Components ① menu enter sync ⑤ ③ ⑥ ⑦ ULXD2 on ④ ② ① QLXD4 Receiver ② PS23 Power Supply ③ 1/2 Wave Antennas (2) ④ 2 ft. BNC Cables (2) ⑤ Choice of QLXD1 Bodypack Transmitter or QLXD2 Handheld Transmitter ⑥ AA Alkaline Batteries (not included in Argentina) ⑦ Rackmount Hardware Model Variations Additional components are added to the basic system components listed above to create systems designed to meet specific performance needs. QLXD2 Handheld Transmitter QLXD1 Bodypack Guitar System QLXD1 Bodypack Headworn or Lavalier Bodypack and Handheld Combo System Includes QLXD2 Handheld, available with any of the following microphone cartridges: • SM58 • Beta 58A • SM86 • Beta 87A • SM87A • Beta 87C • KSM9 • KSM9HS (black) Microphone Clip Zipper Bag Includes QLXD1 bodypack transmitter Premium instrument cable Zipper Bag Includes QLXD1 bodypack, available with any of the following microphone cartridges: • Beta 98H/C • WL93 • WL183 • WL184 • WL185 • MX150 (omni) • MX150 (cardioid) • MX153 (black or tan) • SM35 Zipper Bag • QLXD1 bodypack transmitter with WL185 Microflex cardioid lavalier microphone • QLXD2 handheld transmitter with Shure SM58 microphone cartridge • Zipper Bag (2) Do Not Duplicate or Redistribute Quick Start Step 2: Scanning for the Best Available Frequency Step 1: Power and Antenna Connection 1. Press the menu button on the receiver to access the scan function. ① Connect an antenna to each of the antenna connectors. ② Connect the power supply to the receiver and plug into an AC power source. ③ Connect the receiver audio output to a mixer or amplifier. ④ Press and hold the power button to turn on the receiver. scan IIIIII IIIII I I I I I I I I I II III II II menu I I I I I I III II I I II II audio group rf ir enter channel sync 2. Press the enter button to start a frequency scan. The scan icon will flash while in scan mode. When the scan is complete, the selected group and channel appear on the display. PS23 menu audio group rf enter channel ir sync INSTRUMENT OUT INSTRUMENT OUT AA Batteries Shure SB900 Battery on on ULXD2 Bodypack Transmitter Step 3: Install Batteries into Transmitter on AA Adaptor AA Adaptor ① Accessing the Battery Compartment Press the side tabs on the bodypack or unscrew the cover on the handheld as shown to access the battery compartment. ② Installing Batteries • AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown • Shure SB900 Battery: Place battery as shown (note polarity markings), remove AA Adaptor from bodypack transmitter, stow AA Adaptor in door for handheld transmitter Note: If using AA batteries, select a battery type from the transmitter menu to ensure accurate battery metering. Step 4: IR Sync to Create an Audio Channel good lll lll lll lll l l l l l l l l l l l l l l l lll llll audio lll on sync menu lll lll lll enter l l l l l l l l l l l ll l l l ll menu llll llll llllll <15 cm (6 in.) 2. Align the IR sync windows of the transmitter and receiver at a distance of <15 cm (6 in.). When the transmitter and receiver are aligned, the red ir LED remains on and the sync will automatically occur. 3. sync good appears on the display when IR sync is complete. The blue rf LED will illuminate indicating that the transmitter is within range of the receiver. llllll 1. Press the sync button on the receiver. The red ir LED will blink indicating that sync mode is active. rf enter ir sync Note: If the IR sync fails, repeat the IR sync procedure, carefully maintaining alignment between the IR windows of the transmitter and receiver. Step 5: Sound Check and Gain Adjustment 1. Test the transmitter at performance levels while monitoring the audio meter and the audio LED. menu Tip: The audio meter should display at least 3 bars and the audio LED should be green. Reduce the gain if there is audible distortion of the audio. enter sync 2. Increase or decrease the gain if necessary by pressing the ∧ ∨ buttons on the receiver front panel. Do Not Duplicate or Redistribute Receiver Front and Back Panels 10 menu enter ① Display Shows menu options, receiver and transmitter settings. ⑨ IR Window Align with the transmitter IR window during an IR sync to automatically program transmitters. ④ Sync Button Press to activate IR sync. ⑩ Sync LED • Blinking: IR sync mode is enabled • On: Receiver and transmitter aligned for IR sync ⑤ Power Switch Powers receiver on or off. ⑥ Audio LED • Green = normal • Yellow = signal approaching limiter threshold • Red = limiter engaged to prevent clipping 13 ⑧ RF LED Illuminates when RF link with transmitter is active. ③ Enter Button Press to save menu or parameter changes. 12 ⑦ Menu Button Press to access or select menu screens or to cancel pending changes. Press and hold to return to the home screen. ② Arrow Buttons Adjust gain setting or change menu parameters. 11 sync 14 15 16 17 18 15 ⑪ Power Cord Strain Relief Secures power cord. ⑭ Receiver Reset Press to restore receiver default settings. ⑫ Power Supply Jack Connection point for DC power supply. ⑮ Antenna Connectors BNC connector for receiver antennas ⑬ Ethernet Port For network connection. ⑯ Mic/Line Switch Sets output level to microphone or line. • Amber LED (network speed): ⑰ XLR Audio Output Balanced (1: ground, 2: audio +, 3: audio - ) off = 10 Mbps, on = 100 Mbps • Green LED (network status): off = no network link, on = network link active flashing = rate corresponds to traffic volume ⑱ 1/4" Instrument/Auxiliary Output Impedance Balanced (Tip: audio, Ring: no audio, Sleeve: ground) Do Not Duplicate or Redistribute Transmitters ① Power LED • Green = unit is powered on • Red = low battery ② On/Off Switch Powers the transmitter on or off. ③ Display: View menu screens and settings. Press any control button to activate the backlight. ④ IR window Align with the receiver IR window during an IR sync for automated transmitter programming. ⑤ Menu Navigation Buttons menu = Use to navigate between menu screens. ▼▲ = Use to edit menu parameters enter = Press to confirm and save parameter changes. Tip: Press the menu button to exit without saving parameter changes. ⑥ Battery Compartment Requires 2 AA batteries or a Shure SB900 rechargeable battery. ⑦ AA Battery Adapter Secures batteries when powering transmitter with AA batteries instead of Shure SB900 battery. ⑧ Bodypack Antenna For RF signal transmission. ⑨ Handheld Integrated Antenna For RF signal transmission. ⑩ Microphone Cartridge See Optional Accessories for a list of compatible cartridges. ⑪ TA4M Input Jack Connects to a 4-Pin Mini Connector (TA4F) microphone or instrument cable. ⑫ Battery Contact Cover Align the cover as shown to prevent reflections from the battery contacts during broadcasts or performances. ⑩ ⑪ ①② ⑧ ULXD1 ③ ④ ② ⑤ ③ ④ ⑤ ⑥ ⑦ ⑦ ⑨ Bodypack Transmitter AA Batteries Shure SB900 Battery on on ULXD2 on ⑥ ⑫ Battery Installation ULXD2 on AA Adaptor ① Accessing the Battery Compartment Press the side tabs on the bodypack or unscrew the cover on the handheld as shown to access the battery compartment. AA Adaptor ② Installing Batteries • AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown • Shure SB900 Battery: Place battery as shown (note polarity markings), remove AA Adaptor from bodypack transmitter, stow AA Adaptor in door for handheld transmitter Note: If using AA batteries, set the battery type using the transmitter menu. Setting the AA Battery Type When powering the transmitter with AA batteries, set the battery type in the transmitter menu to match the installed battery type to ensure accurate reporting of transmitter runtime. If a Shure SB900 rechargeable battery is installed, selecting a battery type is not necessary and the battery type menu will not be displayed. 1. Press the menu button to navigate to the battery icon. 2. Use the ▼▲ buttons to select the installed battery type: • AL = Alkaline • nH = Nickel Metal Hydride • Li = Lithium Primary 3. Press enter to save. Do Not Duplicate or Redistribute Transmitter Display ① Battery Indicator Bars displayed indicate remaining battery life. ② Home Screen Display: Group and Channel/Frequency/ SB900 Battery Runtime Use the arrow keys to select one of the following home screen displays: Group and Channel SB900 battery runtime Frequency ③ Encryption Status Icon displayed when encryption is enabled. ④ Lock Displayed when transmitter controls are locked. ⑤ RF Power RF power setting (Lo or Hi). ⑥ Mic Offset Displays mic offset level in 3 dB increments. Note: Group settings are not available in all regions - use channel settings to configure components. Transmitter controls • To access the menu options from the home screen, press the menu button. Each additional press of the menu button advances to the next menu screen. • To save a menu change, press enter enter menu menu enter • To increase, decrease or change a parameter, use the ▼▲ buttons • To exit the menu without saving a change, press the menu button Note: Group settings are not available in all regions - use channel settings to configure components. Transmitter Menu Options and Navigation The transmitter features individual menu screens for setting up and adjusting the transmitter. The following menu options are available starting from the transmitter home screen: ① Home Screen Use the arrow keys to select one of the following home screen displays: • Battery Icon/group and channel • Battery Icon/frequency • Battery Icon/Battery Runtime (SB900 installed) ② group Use the arrow buttons to scroll through the groups. IIIIIIII IIIII IIIII • Lo = 1 mW • Hi = 10 mW ⑦ mic offset dB Use to match audio levels between two transmitters used in a combo system. Range is 0 to 21 dB (3 dB increments). Adjustments occur in realtime ⑧ battery type Use to set the battery type to match the installed AA battery type to ensure accurate battery metering. Menu is not displayed when Shure SB900 batteries are installed. Tips for Editing Menu Parameters • To access the menu options from the home screen, press the menu button. Each additional press of the menu button advances to the next menu screen. • A menu setting will blink when editing is enabled • To increase, decrease or change a parameter, use the arrow buttons • To save a menu change, press enter • To exit the menu without saving a change, press menu III I IIIIIIII IIIII • On = controls locked • OFF = controls unlocked ⑥ rf power Select an rf power setting: III ⑤ lock Select a lock option: III I IIIII ④ frequency Use the arrow buttons to adjust the frequency. Press and hold for faster scrolling. III ③ channel Use the arrow buttons to scroll through the channels. Do Not Duplicate or Redistribute Receiver Display 13 12 11 10 14 15 ⑤ Audio Meter Number of bars displayed corresponds to audio level. • OL = Illuminates when receiver audio limiter is active to prevent clipping • TxOL = Illuminates when transmitter input is overloaded. Reduce input from microphone or instrument to prevent clipping. ⑥ Gain Level Displays receiver gain setting in 1 dB increments. ① Group Displays group setting. ⑦ Receiver Lock Status Lock icon and name of locked control: ② Channel Displays channel setting. ④ RF Signal Meter Number of bars displayed corresponds to RF signal level - OL = overload ⑨ Encryption Status Illuminates when encryption is enabled. Navigating the Receiver Menus ⑪ Network Scan Displayed when network scan function is active ⑫ Network Connection Indicator Illuminates when additional Shure components are detected on the network. ⑬ TV Channel Displays the number of the TV channel containing the selected frequency. ⑭ Transmitter Battery Icon Indicates remaining battery life. • menu • power • gain ⑧ Frequency Setting Selected frequency (MHz) ③ Active Antenna Indicator Illuminates to indicate which antenna is active. ⑩ Scan Displayed when scan function is active ⑮ SB900 Battery Runtime When the transmitter is powered by a Shure SB900 rechargeable battery, remaining runtime is displayed in hours:minutes. The receiver has a main menu for setup and configuration and an advanced menu to access additional receiver functions. Main Menu Press the menu button to access the menu and to cycle through the options in the following order. Each additional press of the menu button advances to a new option. network scan I I I I I I I I ga i n menu MHz gro u p ch an n el I I I I I I n et wo r k I I I I I I I I I I I I I I I I I audio TV I I I ch a n ne l rf MH z I I I gro u p c h a n n e l I I I I I I I I I I I I I I I I enter group I I I MHz MH z ch a n n el I I I gain aud io I I I rf gro u p c h a n nel TV I I I I I I ch a n n el Each additional press of the menu button advances to the next menu screen. I I I I scan I I I I I I I MHz I I I TV Starting from the main menu home screen, press menu while holding the enter button. I I I Advanced Menu ① Scan Receiver automatically scans for the best available frequency ⑤ Lock Choose a control lock option ① Custom Groups Use to add channels and frequencies to Custom Groups ④ IP Settings Use to select and edit IP settings ② Network Scan Scans to find frequencies for networked receivers operating in the same frequency band ⑥ Encryption Use the arrow buttons to enable encryption (on) or disable encryption (off) ② TV Channel Spacing Selects the regional bandwidth for TV channel spacing ⑤ Network Reset Returns network settings and IP address to default setting ③ Group Edit the receiver group settings ⑦ Frequency Use the arrow buttons to edit the frequency value ③ Firmware Update Use to update receiver and transmitter firmware ⑥ Factory Reset Restores factory settings ④ Channel Edit the receiver channel settings For application and configuration details, see the related guide topic for each advanced feature. Tips for Editing Menu Parameters • To access the menu options from the home screen, press the menu button. Each additional press of the menu button advances to the next menu screen. • To increase, decrease or change a parameter, use the arrow buttons • A menu setting will blink when editing is enabled • To save a menu change, press enter • To exit the menu without saving a change, press menu • To access the advanced menu, press menu while holding the enter button Do Not Duplicate or Redistribute AA Batteries and Transmitter Runtimes QLX-D transmitters are compatible with the following AA battery types: • Alkaline • Lithium Primary • Nickel Metal Hydride (NiMH) Transmitter Runtime A 5-segment battery indicator representing the charge level of the transmitter battery is displayed on the screens of the transmitter and receiver. The following tables contain the approximate remaining transmitter runtime in hours:minutes. Alkaline Batteries: Up to 9 Hours of Runtime Battery Indicator NiMH Batteries: Up to 10 Hours of Runtime Approximate Runtime Remaining (hours:minutes) Battery Indicator Lithium Primary Batteries: Up to 16 Hours of Runtime Approximate Runtime Remaining (hours:minutes) 9:00 to 7:15 10:00 to 8:00 7:15 to 5:30 8:00 to 6:00 5:30 to 3:45 6:00 to 4:00 3:45 to 2:00 4:00 to 2:00 2:00 to 0:20 2:00 to 0:20 0:20 to 0:00 0:20 to 0:00 Battery Indicator Approximate Runtime Remaining (hours:minutes) 16:00 to 12:45 12:45 to 9:30 9:30 to 6:30 6:30 to 3:15 3:15 to 0:20 0:20 to 0:00 Shure SB900 Rechargeable Battery Shure SB900 lithium-ion batteries offer a rechargeable option for powering the QLX-D transmitters. Batteries quickly charge to 50% capacity in one hour and reach full charge within three hours. Single chargers and multiple bay chargers are available to recharge the Shure batteries. Caution: Only charge Shure rechargeable batteries with a Shure battery charger. Multiple Bay Chargers Single Bay Charger Shure offers two models of multiple bay chargers: The single bay charger offers a compact charging solution. • SBC-200 two bay charger 1. Plug the charger into an AC power source or USB port. • SBC-800 eight bay charger 2. Insert a battery into the charging bay. Multiple bay chargers can charge individual batteries or batteries installed in transmitters. 3. Monitor the charging status LEDs until charging is complete. 1. Plug the charger into an AC power source. Charging Status LED 2. Insert batteries or transmitters into the charging bay. Color Status Red Charging Green Charging Complete Amber Flashing Fault: check connections and battery Off No battery in bay 3. Monitor the charging status LEDs until charging is complete. Charging Status LED Important Tips for Care and Storage of Shure Rechargeable Batteries Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime. Color Status Green Charging Complete Green/Red Charge level above 90% Red Charging Amber Flashing Fault: check connections and battery Off No battery in bay • Always store batteries and transmitters at room temperature • Ideally, batteries should be charged to approximately 40% of capacity for long-term storage • During storage, check batteries every 6 months and recharge to 40% of capacity as needed 10 Do Not Duplicate or Redistribute Creating Audio Channels A wireless audio channel is formed when a receiver and transmitter are tuned to the same frequency. To ease setup, frequencies available to the QLX-D system are organized into groups and channels. Each group contains a number of channels, and each channel is assigned to a specific preset frequency. The QLX-D system provides 3 methods for tuning the receiver and transmitter to the same frequency: • Scan and IR Sync: The receiver scans the RF spectrum for the best available frequency and an IR sync automatically tunes the transmitter to the receiver frequency • Manual Group and Channel Assignment: Manually setting the receiver and transmitter to the same group and channel number to form an audio channel • Manual Frequency Assignment: Manually setting the receiver and transmitter to the same frequency rather than group and channel to form an audio channel Note: Group settings are not available in all regions - use channel settings to configure components. Scan and IR Sync The simplest way to create an audio channel is to use the scan function to find the best available receiver channel, and then use the IR sync feature to automatically tune the transmitter to the receiver channel. Step 1: Scanning to Find the Best Channel IIIIII I I I I I I I III III II II scan IIIIII The Scan function automatically selects the best available receiver channel. I I I I I I I III III II II 1. Navigate to the Scan menu option. 2. Press enter to start the scan. channel When the scan is complete, the receiver will automatically be set to the best available channel. Step 2: IR Sync for Automatic Transmitter Set Up Performing an IR Sync automatically tunes the transmitter to match the receiver frequency, forming a wireless audio channel. <15 cm (6 in.) 1. Press the sync button on the receiver. The red ir LED will blink indicating that sync mode is active. 3. sync good appears on the display when IR sync is complete. The blue rf LED will illuminate indicating that the transmitter is within range of the receiver. lll enter llll llll menu llll 2. Align the IR sync windows of the transmitter and receiver at a distance of <15 cm (6 in.). When the transmitter and receiver are aligned, the red ir LED remains on and the sync will automatically occur. sync on Note: If the IR sync fails, repeat the IR sync procedure, carefully maintaining alignment between the IR windows of the transmitter and receiver. Manual Group and Channel Assignment An audio channel can be manually created by simply setting the receiver and transmitter to the same group number and channel number. For example, a receiver set to Group 2, Channel 3 and a transmitter set to Group 2, Channel 3 would form an audio channel. Use manual group and channel configuration to assign specific groups and channels to receivers and transmitters as an alternative method to automatically creating channels with IR sync. Use the following steps to set the group and channel in the receiver and transmitter: 1. Navigate to the group setting III I I I I I I I I I I IIIIIIII IIIIIIIIIIIIII IIII IIIIIIIII IIIII channel IIIIIIIIIIIIII IIIIIIIIIIIII 5. Press enter to save. IIII group 4. Next, Use the arrow buttons to select a channel. IIIIIII I IIIIII II II IIIIIIIIII 3. Press enter to select a group. IIIIIIIIIII II IIIII 2. Use the arrow buttons to scroll through the groups. Manual Frequency Selection Manual frequency selection is an alternative to using groups and channels to set the transmitter and receiver to a specific frequency. For example, an audio channel can be created by setting the receiver and transmitter to same frequency. Setting the Receiver Frequency 1. Press menu to navigate to the frequency setting option. 2. Use the ⋀⋁ buttons to adjust the frequency. Press and hold for faster scrolling. 3. Press enter to save. Setting the Transmitter Frequency 1. Press menu to navigate to the frequency setting option. menu enter sync 2. Use the ⋀⋁ buttons to adjust the frequency. Press and hold for faster scrolling. 3. Press enter to save. Do Not Duplicate or Redistribute 11 Receiver Gain Adjustment The gain control sets the overall signal level for the system. From the receiver home screen, use the arrow buttons to increase or decrease the gain: • A single button press adjusts the gain in 1 dB increments menu • Press and hold the button for larger adjustments enter Test the transmitter at performance levels while monitoring the audio meter and the audio LED. sync Tip: Set the gain to a level where the audio LED appears green or yellow, with only the highest audio peaks causing the LED to occasionally turn red and engage the limiter. Reduce the gain if there is audible distortion of the audio. Setting the Transmitter RF Power Wearing the Bodypack Transmitter The transmitter offers two RF power settings which determine the transmitter range. Clip the transmitter to a belt or slide a guitar strap through the transmitter clip as shown. • Lo = 1 mW For best results, the belt should be pressed against the base of the clip. • Hi = 10 mW Use the Lo setting when the transmitter and receiver are in close proximity or when multiple transmitters are in use. Use the Hi setting if additional range is needed. 1. Navigate to the transmitter rf power menu. 2. Use the arrow buttons to select Hi or Lo. 3. Press enter to save. Setting Regional TV Channel Spacing The parameter for TV channel spacing allows the receiver to match regional TV bandwidth usage and accurately display local TV channels. The following channel bandwidth options are available: • 6 MHz • 7 MHz • 8 MHz • 6 JP (Japan) • off (use to turn off TV channel display) To set the TV channel spacing: 1. Press and hold the enter button, and then press the menu button to access the advanced features menu. 2. Press the menu button to navigate to the TVCH menu. 3. Use the arrow buttons to select the channel bandwidth that corresponds to the region. 4. Press enter to save. 12 Do Not Duplicate or Redistribute TV MH z Control Lock Options for the Receiver and Transmitter Control lock options are available for both the receiver and the transmitter to protect against accidental or unauthorized changes to the settings. Locks can be directly set from the component menu, or remotely set from WWB6. To maintain protection, controls remain locked when the transmitter is turned off and turned on. Locking and Unlocking the Receiver Controls Locking and Unlocking Transmitter Controls The receiver has the following control lock options which can be used separately or in any combination: The transmitter controls can be locked or unlocked by selecting On (locked) or OFF (unlocked) from the transmitter lock menu. • gain: locks the arrow buttons to prevent changes to the audio gain settings. If an attempt is made to access a locked control, the lock icon will flash, indicating that the transmitter controls are locked. • menu: prevents access to menu items and IR sync (gain controls and power switch remain active) To set a transmitter lock: • power: disables power switch (gain and menu controls remain active) To lock a receiver control: 1. Use the menu button to navigate to the lock settings. To unlock a receiver: 1. Use the menu button to navigate to the lock settings. Tip: To unlock the menu and clear all locks, press and hold the menu button while in the home screen until the unlock icon appears. Press enter to confirm and save change. 2. Press the arrow buttons to add or remove the lock options shown next to the lock icon. 1. To unlock gain or power settings, navigate to the lock settings by pressing the menu button. 3. Press enter save the lock settings. 2. Press the arrow buttons to deselect a lock option. menu gain sync 3. Press enter to confirm and save change. 3. Press enter to save. The lock icon displayed on the screen, indicates that the control locks are enabled To unlock the transmitter: 1. Press and hold the menu until OFF and the unlock icon appear on the display OFF 2. Press enter to confirm the change and unlock the transmitter. I II I III III I I I I IIII IIIIIIII II enter 2. Press the ⋀⋁ buttons to select on. menu IIII enter sync Audio Signal Encryption The QLX-D receiver features Advanced Encryption Standard (AES-256) to protect the audio signal. When encryption is enabled, the receiver generates a unique encryption key which is shared with a the transmitter during an IR sync. Transmitters and receivers that share an encryption key form a protected audio path, preventing unauthorized access from other receivers. To maintain security, components remain encrypted when turned off and on. Creating an Encrypted Audio Channel 1. Press the menu button to navigate to the encryption menu, indicated by the key icon. 2. Use the arrow buttons to select an encryption option: • on = encryption enabled • OFF = encryption disabled 3. Press enter to save. The key icon will be shown on the receiver display. 4. Press the sync button and align the IR sync windows of the transmitter and receiver. The encryption key icon will appear on the transmitter screen when the IR sync is complete and the encryption key has been transferred from the receiver. <15 cm (6 in.) Note: When OFF is selected from the receiver menu to disable encryption, perform an IR sync to clear the encryption key from the transmitter and allow free reception by other receivers. lll enter llll llll menu llll Additional transmitters can share the same encryption key with a single receiver. Perform an IR sync to encrypt each additional transmitter. sync on Removing Encryption 1. Press the menu button to navigate to the encryption menu. 2. Select OFF. 3. Press enter to save. 4. IR sync the transmitter and receiver to clear the encryption key from the transmitter and allow free reception by other receivers. Note: If encryption is set from off to on, the receiver will generate a new encryption key and must be IR synced to the transmitter to share the new key. Do Not Duplicate or Redistribute 13 Linking Two Transmitters to a Receiver Linking two transmitters to a receiver offers the flexibility to provide a performer with either a handheld or bodypack transmitter to meet their preference. Two instruments with bodypack transmitters can also be linked to a single receiver. Note: Only turn on and operate one transmitter at time to prevent interference between the transmitters. Syncing the Transmitters to the Receiver Both transmitters must be individually linked to the receiver by performing an IR Sync. <15 cm (6 in.) 1. Turn on the first transmitter and perform an IR Sync with the receiver. lll llll llll menu llll 2. Perform a sound check and adjust the transmitter gain if necessary. When finished, turn off the transmitter. sync enter 3. Turn on the second transmitter and perform an IR Sync with the receiver. 4. Test the transmitter at performance conditions and adjust the transmitter gain if necessary. When finished, turn off the transmitter. on Matching Transmitter Audio Levels with Mic Offset Balance the audio levels with Mic Offset to eliminate audible volume differences between transmitters. If using a single transmitter, set Mic Offset to 0 dB. 1. Turn on the first transmitter and perform a sound check to test the audio level. Turn off the transmitter when finished. 2. Turn on the second transmitter and perform a sound check to test the audio level. 3. If there is an audible difference in the sound level between the transmitters, navigate to the Mic Offset menu on the transmitter to increase or decrease the Mic Offset in realtime to match the audio levels. Custom Groups Specific channels and frequencies can be selected and placed into custom groups. Custom groups are commonly used to assign networked receivers to specific range of frequencies or to pre-configure receivers for rental applications. Once a custom group is loaded, only frequencies within the group will be available for audio channels. Creating Custom Groups I I I c ha nne l gro u p c h an n el I I I I I I Press menu while holding the enter button to access the Custom Group screen. Press enter to enable editing of a group (indicated by the group flashing). Selecting A Custom Group The receiver has 6 custom groups available named U1, U2, U3, U4, U5, and U6. MH z I I I I I I gro u p I I I I I I I I I I I I I I I I I I I I I I I I I I TV I I MH z I I I I I I I I I I I I I I TV I I I MH z Selecting a Channel Use the arrow buttons to select a channel (1-60). Each group can contain up to 60 channels (frequencies). Press enter to save the selected channel and advance to frequency assignment. User the arrow buttons to select a group (U1 to U6). Press enter to advance to channel selection. group channel Assigning a Frequency to a Channel Use the arrow buttons to assign a frequency to the selected channel. Press enter to save. After pressing enter, the channel will flash to allow for adding more channels and frequencies to the custom group. To add more channels and frequencies, repeat steps 1 and 2. When finished, press the menu button several times to return to the main menu. Loading Custom Groups to Networked Receivers Deleting a Custom Group 1. Press menu while holding the enter button to access the Custom Group screen. 2. Press enter to enable editing of a group (indicated by the group flashing). 3. User the arrow buttons to navigate to display the group number and the words DEL. 4. Press enter to delete the group. Creating Custom Groups using Wireless Work Bench 6 Custom groups can be created in WWB6 by accessing the Frequency Coordination tab. Refer to the WWB6 help system for detailed instructions for configuring Custom Groups. 14 Do Not Duplicate or Redistribute Networking The receiver uses an Ethernet connection to network with other components and includes an internal DHCP client for automatic network configuration when connected to a DHCP enabled router. Connecting to a Network 1. Insert an Ethernet cable in the Ethernet port on the rear of the receiver. 2. Connect the cable to a computer or router. 3. The port LEDs on the receiver will illuminate to indicate network connectivity and network traffic. Automatic IP Addressing 1. Enable a DHCP service on the server or use a DHCP enabled router. Network Troubleshooting • Use only one DHCP server per network • All devices must share the same subnet mask • All receivers must have the same level of firmware revision installed • Look for the illuminated network icon on the front panel of each device: If the icon is not illuminated, check the cable connection and the LEDs on the Ethernet port. If the Ethernet port LEDs are not illuminated and the cable is plugged in, replace the cable and recheck the LEDs and network icon. 2. When the receiver is powered on, the DHCP server will automatically assign an IP address to the receiver. To check connectivity of WWB6 to the network: Tip: Use the network reset option available in the advanced features menu to return the receiver to the default DHCP addressing mode. 1. Start WWB6 software and use Inventory view to see devices connected to the network. Configuration Tips 2. If not, find the IP address from one of the devices on the network (such as a receiver) and see if you can ping it from the computer running WWB6. • Use shielded Cat 5 or better Ethernet cables to ensure reliable network performance • The LEDs on the Ethernet port illuminate indicating a network connection is active • The network icon illuminates when the receiver detects other Shure devices on the network • All components must operate on the same subnet • Use multiple Ethernet switches to extend the network for larger installations 3. From a WINDOWS/MAC command prompt, type ‘ping IPADDRESS’ of the device (e.g. "ping 192.168.1.100"). 4. If the ping returns success (no packet loss), then the computer can communicate with the device on the network. If the ping returns failure (100% packet loss), then verify that the IP address of the computer is on the same subnet as the receiver. 5. If the pings are successful and the devices still do not show up in the WWB6 inventory, check to ensure all firewalls are either disabled or allow the WWB network traffic to pass to the application. Check that firewall settings are not blocking network access. Setting the IP Address and Subnet Address Manually IP addresses and Subnet addresses can be manually set from the advanced menu in the receiver or from the monitor panel in Wireless Workbench 6. Network settings entered manually must be valid and conform to IP protocols to ensure proper network communication. Receiver Menu IP addresses and subnet addresses contain 4 groups of numbers. Each group and contain up to 3 digits. A decimal point separates each group. When setting an IP address or subnet address, each of the 4 groups must be edited individually. The following diagram shows how the groups are mapped to the receiver display: 1. Press menu while holding the enter button to access the advanced menu. 2. Press the menu button to navigate to the IP menu. 3. Use the arrow buttons to set the mode to St and press enter. 0 00.000.000.000 4. Use the arrow buttons to edit the first group. Press enter to save and continue to the next group. 5. Use the arrow buttons and enter button to edit the remaining 3 groups. 6. When group 4 has been edited, the display will show the subnet menu. Press enter to skip editing the subnet or use the arrow and enter buttons to edit the 4 subnet groups. 7. When finished, press enter to save settings Wireless Workbench 6 1. Open the Channel Properties tab in WWB6. 2. Click on Utilities and set the networking mode to Manual. 3. Enter valid numbers in the IP and Subnet fields. 4. When finished, select Apply. Do Not Duplicate or Redistribute 15 Network Scan The Network Scan feature automates frequency assignment by using a single receiver to scan and deploy frequencies to all networked receiver within the same frequency band. Network Scanning and Frequency Deployment Prior to performing a network scan, turn on all receivers and allow 30 to 60 seconds for all receivers to join the network. 1. Connect receivers to an active Ethernet network. All receivers must be on the same subnet. 2. To start a network scan, press the menu button on any networked receiver and navigate to the network scan menu. Press enter. 3. When the scan is complete, press enter to deploy the best available frequencies to all receivers in the network. Tip: to cancel a frequency deployment, press the menu button. 4. The front panel LEDs on each receiver will blink when a deployed frequency is assigned. Note: Full frequency deployment may not occur if the number of receivers in the network exceeds the number of available frequencies. Connecting to an External Control System The receiver connects to external controls systems (AMX or Crestron) via Ethernet cables. Use only one controller per system to avoid messaging conflicts. • Connection: Ethernet (TCP/IP; QLXD receiver is the client) • Port: 2202 For a comprehensive list of command strings, visit: http://shure.custhelp.com/ Shure AXT600 Spectrum Manager Compatibility QLX-D receivers are compatible with the Axient AXT600 Spectrum Manager. Networked receivers will appear in the device inventory and frequencies from the Compatible Frequency List can be deployed and monitored by the Spectrum Manager. For more information regarding the Spectrum Manager, see the Axient System Guide. 16 Do Not Duplicate or Redistribute Managing QLX-D with Wireless Workbench 6 Shire’s Wireless Workbench 6 (WWB6) software enables networked monitoring and control of the QLX-D receiver. Additional tools in WWB6 offer RF spectrum monitoring, network configuration, and firmware updating. Visit: www.shure.com/wwb for a free download of Wireless Workbench software. Managing and Monitoring Settings 10 ① RF and Audio Meters Displays: current levels, band, TV, and TX Overload ② Transmitter Settings Displays: RF Power, Tx Type, Mic Offset, Tx Lock ③ Frequency Settings Use drop-down to edit frequency value ④ Encryption Icon Illuminates when Encryption is enabled ⑤ Receiver Gain Setting Use drop-down to increase or decrease gain settings ⑥ Custom Groups Click to enter to create custom groups ⑦ Utilities Access receiver functions ⑧ Network Tab Set network mode, view: IP address, Subnet, MAC, Firmware version, Network reset ⑨ Encryption Enable/Disable Encryption ⑩ Locks Lock/Unlock: Menu, Gain, Power Manage and monitor receiver settings by opening the Monitor tab in Wireless Workbench. Click on the Settings button to show or hide the full Properties window. Viewing the Receiver in WWB6 Inventory Click on the Inventory tab to view the receiver channels. Double-click on parameters to enable editing. Tip: Clicking on the receiver icon next to the channel name flashes the front panel LEDs on the receiver for remote identification. Hardware Identify When Hardware Identify is triggered from a receiver, the corresponding representation of that receiver is flashed in the WWB inventory display, allowing for remote identification. Hardware Identify can be triggered from the receiver by pressing and holding the enter button for at least 3 seconds. Click the Dismiss button on the WWB Inventory screen to exit the function. Do Not Duplicate or Redistribute 17 Firmware Updates Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate additional features and enhancements. Firmware Versioning When updating receiver firmware, update transmitters to the same firmware version to ensure consistent operation. The firmware version is numbered in the form of MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all devices on the network (including transmitters), must have the same MAJOR and MINOR firmware version numbers (e.g., 1.2.x). Downloading and Updating Firmware A free Shure Update Utility tool is available by visiting www.shure.com. The Shure Update Utility is also bundled with Shure Wireless Workbench software. Refer to the help instructions to use the Shure Update Utility. Updating the Receiver CAUTION! Ensure that receiver power and network connections are maintained during a firmware update. Do not turn off the receiver until the update is complete. 1. Connect the receiver and computer to the same network. 2. Open the Shure Update Utility. 3. Click on the firmware tab to find available updates. 4. Use the Import button if manually importing firmware files. 5. Click the Update Device tab and check the Version to install box next to each device. 6. Click Send Updates to load the firmware to the networked devices. 7. When the download is complete, the receiver will reboot with the updated firmware installed. Updating the Transmitter When firmware is downloaded to the receiver, it includes firmware updates for the transmitter. Updated firmware is passed from the receiver to the transmitter using the IR Sync port. 1. Press menu while holding the enter button to access the advanced menu. Use the menu button to navigate to the update menu. 2. Press enter to start the update. 3. When the red IR LED flashes, align the receiver and transmitter IR sync ports. The red LED will remain illuminated to indicate correct alignment and the download will automatically start. 4. Maintain alignment during the update and monitor download progress (0 to 100%) on the receiver screen. 5. When the update is complete, "TX Update good" is shown on the receiver display. Using QLX-D with a Shure ULX-D System Transmitters and receivers from QLX-D and ULX-D component groups can be paired to form audio channels. To ensure functionality, use the following settings on the ULX-D receivers and transmitters: • Encryption set to Off • High Density Mode set to Off • Manually tune the receiver and transmitter to the same frequency. IR sync between QLX-D and ULX-D components is not supported. To create an audio channel, manually set the receiver frequency to match the frequency of the transmitter. Error Codes and Solutions Error codes are generated when the receiver detects a condition that can potentially affect system performance. If an error is displayed on the receiver, use the following table to identify the problem and find the corresponding solution. Error Code Description Solutions Err.001 Audio Compatibility Update transmitter and receiver firmware to the latest version. Err.002 Encryption Mismatch between Shure product lines Set encryption to off for components from different Shure products lines, such as QLX-D and ULX-D. Err.003 Encryption Mode Mismatch Ensure that encryption is set to on or to off for both the receiver and transmitter. Err.004 Band Mismatch Receiver and transmitter are operating in overlapping frequencies from different bands. Err.005 Frequency Mismatch Receiver and transmitter are from bands that do not share compatible frequencies. Err.006 No Frequencies Found Rescan, select a different group, or use WWB to find a frequency. Err.007 Firmware Mismatch Update firmware on the transmitter and receiver. 18 Do Not Duplicate or Redistribute Troubleshooting Issue See Solution... No Sound Power, Cables, or Radio Frequency Faint sound or distortion Gain, Cables, Reducing Interference or Radio Frequency Lack of range, unwanted noise bursts, or dropouts RF Cannot turn transmitter off or change frequency settings, or can't program receiver Interface locks Power Make sure that the receiver and transmitter are receiving sufficient voltage. Check the battery indicators. Replace or recharge the batteries if necessary. Gain Adjust the system gain on the front of the receiver. Ensure the mic/line switch setting (XLR output only) on the back of the receiver corresponds to the input of the mixing console, amplifier, or processor. Cables Check that all cables and connectors are fully engaged or locked into position. Inspect cables for damage. Replace if necessary. Interface Locks The transmitter and the receiver can be locked to prevent accidental or unauthorized changes. If a locked control is accessed, the lock icon on the display will flash. Follow the instructions to unlock the receiver or transmitter. Frequency Compatibility • Perform a Scan and Sync to ensure the transmitter and receiver are set to the same channel or frequency • Look at the label on the transmitter and receiver to make sure they are in the same band (G50, J50, L50, etc...). Reducing Interference • Perform a scan to find the best open frequency. Perform an IR sync to transfer the settings to the transmitter. • For multiple systems, make sure that each receiver is assigned to a unique channel. Interference will occur if two receivers are set to the same channel. • Maintain a line of sight between transmitter and receiver antennas. • Move receiver antennas away from metal objects or other sources of RF interference (such as CD players, computers, digital effects, network switches, network cables and Personal Stereo Monitor (PSM) wireless systems). • Eliminate RF overload (see below). Increasing Range Firmware Mismatch Paired transmitters and receivers must have the same firmware version installed to ensure consistent operation. See Firmware Updates topic for firmware update procedure. Radio Frequency (RF) The blue RF LED will illuminate when a linked transmitter is within range of the receiver. Measure the transmitter range before a performance to avoid operating beyond the specified transmitter range. The RF meter bars indicate amount of RF power being received. This signal could be from the transmitter, or it could be from an interfering source, such as a television broadcast. If the meter shows a signal level when the transmitter is off, then that channel may have interference. Check the surrounding area for sources of interference or change the receiver to a clear frequency. • Increase transmitter RF power level. • Use an active directional antenna, antenna distribution system, or other antenna accessory to increase RF range. Eliminating RF Overload If the RF OL appears on the RF meter, try the following: • Reduce the transmitter RF power level • Move the transmitter further away from the receiver—at least 6 m (20 ft) • If you are using active antennas, reduce antenna or amplifier gain. • Use omnidirectional antennas A red RF LED indicates RF overload. Avoid operating multiple systems in close proximity. Do Not Duplicate or Redistribute 19 Single and Dual Rackmount Assembly Installing Foot Pads Securing AC power cord Receiver Output Connectors 47 µF instrument/ aux 50 Ω 50 Ω 47 µF 47 µF mic/ line -30 dB 50 Ω 47 µF TA4M Connector SHIELD 500 Ω 500 Ω 1µF 910k Ω 20 Active Load 5 V DC 47 µF 440 pF Audio Input Ground Do Not Duplicate or Redistribute Ground Bias Voltage Audio Input Ground Specifications RF Carrier Frequency Range 470–937.5 MHz, varies by region (See Frequency Range and Output Power table) Audio Dynamic Range Working Range 100 m (330 ft) Total Harmonic Distortion RF Tuning Step Size 25 kHz, varies by region System Audio Polarity Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. Note: Actual range depends on RF signal absorption, reflection and interference. Image Rejection >70 dB, typical System Gain @ +10 >120 dB, A-weighted, typical −12 dBFS input, System Gain @ +10 <0.1% Operating Temperature Range -18°C (0°F) to 50°C (122°F) RF Sensitivity -97dBm at10(-5) BER Note: Battery characteristics may limit this range. Latency <2.9 ms Storage Temperature Range -29°C (-20°F) to 74°C (165°F) Audio Frequency Response Note: Battery characteristics may limit this range. QLXD1 20 – 20 kHz (±1 dB) QLXD2 Note: Dependent on microphone type QLXD4 Dimensions 197 mm x 171 mm x 42 mm (7.75 in. x 6.75 in. x 1.65 in.), H x W x D Weight 913 g (2.0 lbs), without antennas Full Scale Output 1/4" (6.35 mm) +12 dBV XLR LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch 30 dB pad Housing steel Power Requirements 12 V DC @ 0.4 A, supplied by external power supply (tip positive) RF Input Phantom Power Protection 1/4" (6.35 mm) Yes XLR Yes Networking Spurious Rejection >80 dB, typical Network Interface Single Port Ethernet 10/100 Mbps Connector Type BNC Network Addressing Capability DHCP or Manual IP address via WWB6 Maximum Cable Length 100 m (328 ft) Impedance 50 Ω Audio Output Gain Adjustment Range -18 to +42 dB in 1 dB steps Configuration 1/4" (6.35 mm) Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR balanced (1=ground, 2=audio +, 3=audio −) Impedance 1/4" (6.35 mm) 100 Ω (50 Ω Unbalanced) XLR 100 Ω Do Not Duplicate or Redistribute 21 QLXD1 QLXD2 Mic Offset Range 0 to 21 dB (in 3 dB steps) Mic Offset Range 0 to 21 dB (in 3 dB steps) Battery Type Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V Battery Type Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V Battery Runtime Battery Runtime Shure SB900 >10 hours alkaline up to 9 hours See Battery Runtime Chart Dimensions 86 mm x 66 mm x 23 mm (3.4 in. x 2.6 in. x 0.9 in.) H x W x D Weight 142 g (5.0 oz.), without batteries Shure SB900 >10 hours alkaline up to 9 hours hours See Battery Runtime Chart Dimensions 256 mm x 51 mm (10.1 in. x 2.0 in.) L x Dia. Weight 340 g (12.0 oz.), without batteries Housing Cast aluminum Housing Machined aluminum Audio Input Connector 4-Pin male mini connector (TA4M), See drawing for details Configuration Unbalanced Audio Input Configuration Unbalanced Maximum Input Level 1 kHz at 1% THD 145 dB SPL (SM58), typical Impedance 1 MΩ, See drawing for details Note: Dependent on microphone type Maximum Input Level RF Output Preamplifier Equivalent Input Noise (EIN) Antenna Type Integrated Single Band Helical 1 kHz at 1% THD System Gain Setting ≥ +20 Occupied Bandwidth <200 kHz -120 dBV, A-weighted, typical RF Output Modulation Type Shure proprietary digital Connector SMA Power 1 mW or 10 mW Antenna Type 1/4 wave Impedance 50 Ω Occupied Bandwidth <200 kHz Modulation Type Shure proprietary digital Power 1 mW or 10 mW Frequency Bands and Transmitter RF Power Band Frequency Range (MHz) RF Power (mW) Band Frequency Range (MHz) RF Power (mW) G50 470 - 534 1 or 10 K52 606 - 670 1 or 10 G51 470 - 534 1 or 10 L50 632 - 696 1 or 10 G52 479 - 534 1 or 10 L51 632 - 696 1 or 10 H50 534 - 598 1 or 10 L52 632 - 694 1 or 10 H51 534 - 598 1 or 10 L53 632 - 714 1 or 10 H52 534 - 565 1 or 10 P51 710 - 782 1 or 10 H53 534 - 598 1 or 10 P52 710 - 782 1 or 10 J50 572 - 636 1 or 10 Q51 794 - 806 1 or 10 J51 572 - 636 1 or 10 S50 1 or 10 JB 806 - 810 1 or 10 (823 - 832) (863 - 865) K51 606 - 670 1 or 10 X51 925 -937.5 1 or 10 22 Do Not Duplicate or Redistribute Optional Accessories Batteries/Chargers/Hardware SHURE LITHIUM-ION RECHARGABLE BATTERY SB900 8-Pack Shure Lithium-Ion Rechargeable Batteries SBC800 8-Bay Shure Battery Charger, SBC200 Cables and Splitters Dual Docking Charger with PS45US Power Supply Dual Docking Charger, Power Supply NOT Included WA610 FRONT MOUNT ANTENNA KIT (INCLUDES 2 CABLES AND 2 BULKHEAD) UA600 REMOTE ANTENNA BRACKET WITH BNC BULKHEAD ADAPTOR UA505 Antennas and Antenna Accessories COAXIAL CABLE, BNC-BNC, RG58C/U TYPE, 50 OHM, 2 FT LENGTH (0.6 M) UA802 COAXIAL CABLE, BNC-BNC, RG58C/U TYPE, 50 OHM, 6 FT LENGTH (2 M) UA806 COAXIAL CABLE, BNC-BNC, RG8X/U TYPE, 50 OHM, 25 FT LENGTH (7.5 M) UA825 COAXIAL CABLE, BNC-BNC, RG8X/U TYPE, 50 OHM, 50 FT LENGTH (15 M) UA850 COAXIAL CABLE, BNC-BNC, RG213/U TYPE, 50 OHM, 100 FT LENGTH (30 M) UA8100 ETHERNET JUMPER CABLE, 8" C8006 ETHERNET CABLE, 3 FT. C803 ACTIVE DIRECTIONAL ANTENNA 470-790MHZ UA874E ETHERNET CABLE, 10 FT. C810 ACTIVE DIRECTIONAL ANTENNA 470-698MHZ UA874US ETHERNET CABLE, RUGGEDIZED, 100 FT. C8100 ACTIVE DIRECTIONAL ANTENNA 470-900MHZ UA874WB ETHERNET CABLE, RUGGEDIZED, 25 FT. C825 ACTIVE DIRECTIONAL ANTENNA 925-952MHZ UA874X ETHERNET CABLE, RUGGEDIZED, 50 FT. C850 HELICAL ANTENNA, 470-900MHZ HA-8089 Active Antenna Splitters HELICAL ANTENNA, 944-952MHZ HA-8241 ANTENNA/POWER DIST SYS DMPN UA845 E UNIDIRECTIONAL SUPER WIDEBAND ANTENNA PA805SWB ANTENNA/POWER DIST. SYSTEM UA845 E "B" UNIDIR. WIDEBAND ANTENNA 944-952MHZ PA805X ANTENNA/POWER DIST. SYSTEM UA845J In-line Power Supply UABIAST-US ANTENNA UHF-R 470-952 MHz UA845-SWB ANTENNA,POWER DIST UHF-R 470-952 MHz UA845-SWB-AZ ANTENNA UHF-R 470-952 MHz UA845-SWB-BR ANTENNA,POWER DIST UHF-R 470-952 MHz UA845-SWB-C ANTENNA,POWER DIST UHF-R 470-952 MHz UA845-SWB-E ANTENNA UHF-R 470-952 MHz UA845-SWB-K ANTENNA,POWER DIST UHF-R 470-952 MHz UA845-SWB-UK ANT/PWR DIST SYS (120V,782-806MHZ) UA845-UA REPL BY UA845 US UA845US UHF Line Amplifiers In-Line Antenna Amplifier, 792810 MHz UA830A IN-LINE ANTENNA AMPLIFIER 470-698MHz UA830USTV In-Line Antenna Amplifier, 500900 MHz UA830WB In-Line Antenna Amplifier UA830X PASSIVE OMNIDIRECTIONAL ANTENNA UA860SWB Do Not Duplicate or Redistribute 23 Certifications This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: 49-7262-92 49 0 Fax: 49-7262-92 49 11 4 Email: EMEAsupport@shure.de Approved under the Declaration of Conformity (DoC) provision of FCC Part 15. Certified by IC in Canada under RSS-210. Conforms to electrical safety requirements based on IEC 60065. Complies with and/or is certified to RSS-210, RSS-GEN. Certified by IC in Canada under RSS-123 and RSS-102. Certified under FCC Part 74. QLXD1, QLXD2 IC: 616A-QLXD1G50, 616A-QLXD1H50, 616A-QLXD1J50, 616A-QLXD1L50, 616A-QLXD2G50, 616A-QLXD2H50, 616A-QLXD2J50, 616A-QLXD2L50. FCC: DD4QLXD1G50, DD4QLXD1H50, DD4QLXD1J50, DD4QLXD1L50, DD4QLXD2G50, DD4QLXD2H50, DD4QLXD2J50, DD4QLXD2L50. Europe, Middle East, Africa: Shure Europe GmbH Jakob-Dieffenbacher-Str. 12, 75031 Eppingen, Germany Phone: 49-7262-92490 Fax: 49-7262-9249114 Email: info@shure.de PT. GOSHEN SWARA INDONESIA Kompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat I.16.GSI31.00501.0211
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2014:03:10 11:51:09-05:00 Metadata Date : 2014:03:10 11:51:36-05:00 Modify Date : 2014:03:10 11:51:36-05:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:0a93f563-d09e-4c0c-b100-efcc5d72f6d8 Original Document ID : xmp.did:90FB96C05D66E2119BBDE2762B8BDA08 Document ID : xmp.id:5C3A45C16BA8E311B73BF9BD32B244CF Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:314AA2A0DE98E311A272D37C94FCE072 Derived From Document ID : xmp.did:7790A649AA8EE3118DA898F26E9667BD Derived From Original Document ID: xmp.did:90FB96C05D66E2119BBDE2762B8BDA08 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:03:10 11:51:09-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 25 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools