Shure orporated ULXD6X52 Wireless Boundary Transmitter User Manual v02
Shure Incorporated Wireless Boundary Transmitter v02
User Manual v02
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3182300 |
| Application ID | pjSUoiU883eWVc7D5IxZzA== |
| Document Description | User Manual v02 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 71.67kB (895907 bits) |
| Date Submitted | 2016-11-01 00:00:00 |
| Date Available | 2016-11-03 00:00:00 |
| Creation Date | 2016-08-29 09:09:26 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-11-01 09:48:53 |
| Document Title | User Manual v02 |
| Document Creator | Adobe InDesign CC 2015 (Windows) |
Le Guide de l’Utilisateur Bedienungsanleitung Guia del Usuario Guida dell’Utente Manual do Usuário Руководство пользователя 日本語 사용자 가이드 繁體中文 用戶指南 Panduan Pengguna Gebruikershandleiding WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions. 8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product. 9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer. 12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance coupler shall remain readily operable. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. 21. Operate this product within its specified operating temperature range. Quick Start Instructions 45° 150 mA line line line line mic mic mic mic 1-G: 01CH:03 2-G: 01CH:06 3-G: 01CH:08 4-G: 01CH:12 sync EXIT control SCAN SCAN RF audio A B gain OL TxOnENTER TxOn TxOnEXIT TxOn OL control SCAN EXIT line line line mic mic mic mic Select RX TO SCAN 1 Receiver 2 Receiver 3 Receiver line mic push power line mic gain OL EXIT sync line RF audio A B OL ENTER GROUP SCAN push SCAN COMPLETE SCAN ENTER GROUP:01 OPEN FREQ:70 RX CHAN FOUND: EXIT EXIT CHANNEL SCAN GROUP SCAN line line mic mic Deploy Completed SCAN 4 of 4 Channels Set SYNC TX NOW RX1 RF audio A B gain OL OL sync AA ULXD4Q Digital Wireless Receiver <15 cm (6 in.) ULXD4 ENTER Digital Wireless Receiver EXIT SCAN sync III IIII II I III AA + + SB900 ULXD series boundary and gooseneck microphones and networked charging stations add new designs to Shure's breakthrough ULX-D wireless line. Boundary and gooseneck transmitters offer cable-free flexibility for corporate conference rooms, government facilities, and educational institutions. Use Shure Wireless Workbench® and networked charging stations to simplify transmitter configuration and monitor charging status. Simply change settings in Wireless Workbench for all transmitters docked on a charger, instead of syncing each transmitter individually. Both microphones run on rechargeable or AA batteries and can be controlled through external control systems, such as AMX or Crestron. As part of Shure's groundbreaking ULXD line, both gooseneck and boundary microphones include audio signal encryption, highdensity mode, and the reliability of ULX-D systems. Boundary microphones offer cardioid and omnidirectional cartridges, and the gooseneck base fits Microflex series gooseneck microphones. Included Components • 15" Supercardioid Gooseneck Microphone AA Batteries Accessories 2-bay networked charger for gooseneck and boundary microphones SBC250 4-bay networked charger for gooseneck and boundary microphones SBC450 8-bay networked charger for gooseneck and boundary microphones SBC850 8-Bay Shure Battery Charger SBC800 6' USB-A cable with wall plug for charging Wireless Transmitters SBCUSB-A Model Variations ULXD Cardioid Boundary Microphone ULXD6/C ULXD Omnidirectional Boundary Microphone ULXD6/O ULXD Gooseneck Base ULXD8 5" Cardioid Gooseneck Microphone MX405LP/C 5" Supercardioid Gooseneck MX405LP/S MX415LP/S 5" Gooseneck with Red Top LED (no cartridge) MX405RLP/N 10" Gooseneck with Red Top LED (no cartridge) MX410RLP/N 15" Gooseneck with Red Top LED (no cartridge) MX415RLP/N 10" Cardioid Dualflex Gooseneck Microphone MX410LPDF/C 10" Supercardioid Dualflex Gooseneck Microphone MX410LPDF/S 10" Dualflex Gooseneck with Red Top LED (no cartridge) MX410RLPDF/N 10" Cardioid Dualflex Gooseneck Microphone with Red Top LED MX410RLPDF/C 10" Supercardioid Dualflex Gooseneck Microphone with Red Top LED MX410RLPDF/S 15" Cardioid Dualflex Gooseneck Microphone MX415LPDF/C 15" Supercardioid Dualflex Gooseneck Microphone MX415LPDF/S Transmitter Controls and Connectors Status LED ① Power Button Press and hold for two seconds to turn microphone on or off. To change status LED behavior, use Wireless Workbench or ULXD receiver front panel. ② Mute/Active Button Four settings are available for the mute/ active button: -- Toggle: Press to switch between active and mute states -- Push-to-Mute: Hold button to mute microphone -- Push-to-Talk: Hold button to activate microphone when speaking -- Disabled: Button functionality off ULXD6 and ULXD8 (with MX400 series gooseneck) ③ Status LED Indicates microphone's audio status. ④ Low-Battery LED -- Off = More than 30 minutes of battery life remain -- On = Less than 30 minutes of battery life remain Active Muted Green (factory setting) Red (factory setting) Red Off Red Flashing red ULXD8 (with MX400R series gooseneck) ⑤ Infrared (IR) Port Align with receiver IR port to send settings to transmitter. Active Muted ⑥ Charge Connector Connects to networked chargers. Red (factory setting) ⑦ Gooseneck Microphone ULXD8 base fits 5", 10", and 15" Microflex series microphones. Off (factory setting) Red Flashing Battery and Charging Installation Battery Information 1. Open the battery compartment. 2. Insert one SB900 battery or two AA batteries. Align +/- terminals on batteries as shown. 3. Close battery door until it latches. + + See the receiver front panel or the microphone properties on Wireless Workbench for detailed battery information. Charging Charge transmitters with Shure rechargeable batteries in networked charging station. Connecting Gooseneck Microphone to ULXD8 Base ULXD8 bases fit 5", 10", and 15" Microflex series gooseneck microphones. Connect microphone to base as shown. Changing Transmitter Settings Modify the transmitter's mute/active button behavior, status LED behavior, high-pass filter, and encryption settings to fit your setup. There are three different ways to change transmitter settings: 1. Change settings in Wireless Workbench and send to all transmitters on a networked charger 2. Change settings in Wireless Workbench, send settings to each receiver, and perform an IR sync between each receiver and transmitter pair 3. Change settings for each transmitter from ULXD receiver front panel and perform an IR sync !! ! ! ! ! ! ! !! !! ! ! ! ! ! ! RF A B For configuration details, see the full manual available at www.shure.com. !! ! !! ! Global Frequency Range Band Frequency Range (MHz) G50 470 to 534 G51 470 to 534 G52 479 to 534 H50 534 to 598 H51 534 to 598 H52 534 to 565 H53 534 to 598 J50 572 to 636 J51 572 to 636 K51 606 to 670 K52 606 to 670 L51 632 to 696 L52 632 to 694 L53 632 to 714 P51 710 to 782 P52 710 to 782 JB (Tx only) 806 to 810 Q51 794 to 806 S50 823 to 865 X51 925 to 937.5 X52 902 to 928 X53 902 to 907.500, 915 to 928 X54 915 to 928 Z16 1240 to 1260 Certifications This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Certified under FCC Part 74, FCC Part 15. Certified by IC in Canada under RSS-247 and RSS-210,RSS-GEN. IC: 616A-ULXD6G50, 616A-ULXD6H50, 616A-ULXD6J50, 616A-ULXD6X52, 616A-ULXD8G50, 616A-ULXD8H50, 616A-ULXD8J50, 616A-ULXD8X52. FCC: DD4ULXD6G50, DD4ULXD6H50, DD4ULXD6J50, DD4ULXD6X52, DD4ULXD8G50, DD4ULXD8H50, DD4ULXD8J50, DD4ULXD8X52. This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. Note: For transmitters operating in the V50 and V51 bands: nominal free space antenna gain at middle of the band is typically -6 dBi, and rolls off at the band edges an additional -4 dB. This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/ compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: 49-7262-92 49 0 Fax: 49-7262-92 49 11 4 Email: info@shure.de the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. For the band Z17 (1492-1525 MHz), it must be used indoors only. For the band Z19 (1785-1800 MHz), if the transmitter operates on a frequency below 1790 MHz, it must be used indoors only. WARNING: Danger of explosion if battery incorrectly replaced. Operate only with Shure This equipment has been tested and found compatible batteries. to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC WARNING Rules. These limits are designed to provide reasonable protection against harmful • Battery packs may explode or release interference in a residential installation. toxic materials. Risk of fire or burns. Do This equipment generates uses and can not open, crush, modify, disassemble, radiate radio frequency energy and, if not heat above 140°F (60°C), or incinerate. installed and used in accordance with the • Follow instructions from manufacturer instructions, may cause harmful interference to radio communications. However, there is • Only use Shure charger to recharge no guarantee that interference will not occur Shure rechargeable batteries in a particular installation. If this equipment • WARNING: Danger of explosion if battery does cause harmful interference to radio or incorrectly replaced. Replace only with television reception, which can be determined same or equivalent type. by turning the equipment off and on, the user is encouraged to try to correct the • Never put batteries in mouth. If interference by one or more of the following swallowed, contact your physician or measures: local poison control center • Reorient or relocate the receiving • Do not short circuit; may cause burns antenna. or catch fire • Increase the separation between the • Do not charge or use battery packs other equipment and the receiver. than Shure rechargeable batteries Information to the user • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • • Consult the dealer or an experienced radio/TV technician for help. Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs. • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Please follow your regional recycling scheme for batteries, packaging, and electronic waste.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Warning : Invalid secondary xref table Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00 Create Date : 2016:08:29 09:09:26-05:00 Metadata Date : 2016:08:29 09:09:29-05:00 Modify Date : 2016:08:29 09:09:29-05:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:6f79ed46-f3b0-4481-af12-819867fd9e2c Original Document ID : xmp.did:B6779F70032DE3118BE4E3ADBE5FD3E2 Document ID : xmp.id:136b9ba9-76d0-cf4a-9697-b32943003c2b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7d125438-4358-3340-8c81-ed17c1564f8e Derived From Document ID : xmp.did:116b4959-7de4-7041-af6c-6df5451f1242 Derived From Original Document ID: xmp.did:B6779F70032DE3118BE4E3ADBE5FD3E2 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2016:08:29 09:09:26-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CC 2015 (Windows)EXIF Metadata provided by EXIF.tools