Shure orporated UR1HH Bodypack Transmitter User Manual Exhibit D Users Manual per 2 1033 c3

Download:
Mirror Download [FCC.gov]
Document ID	1246333
Application ID	+dtzijPPMP7WmJgluJKfXA==
Document Description	Exhibit D Users Manual per 2 1033 c3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.51kB (143858 bits)
Date Submitted	2010-03-01 00:00:00
Date Available	2010-03-01 00:00:00
Creation Date	2010-02-05 12:43:51
Producing Software	Canon iR3035
Document Lastmod	0000-00-00 00:00:00
Document Title	Exhibit D Users Manual per 2 1033 c3
Document Creator	Canon iR3035

Specifications:
The following specifications apply
to the UR1 H bodypzw only.
UR1 H
ADD: él ‘Wflvgo Mil?
Frequency Range
sand Rang.
H4, me 513-573 MHz
J5 578—608. 5144338 MHz
J5E moss MHz
L3E, L3 0304393 MHz
05 74mm MHz
R9 790—862 MHZ
x1 944052 MHz
RF Carrier Frequency Range
470 figs-352 MHz, depending on region
RF Output Power
250 mw (24 dBm) across all tunable frequencies.
maximum variation of 4.5 dB
Power Requirements
Two 1.5VAA batteries or
9 - 20 vac. strure Pszz adaptor recommended
"42—6 Plug size: 1.7 mm x 4.0 mm (.067 In. x .159 in)
NOTE: Thls equipment has been tested and found (a comply
wifl'i the limits of a Class B digital device when used with P822.
pursuantto Part 15 oitne FCC Rules.
eunent Drain: 350 mA maxlmum at the battery terminals with
3 VDC applied
Battery i.iie (Typical): 3 hours. wilh 1.5VAA alkaline batteries
7 lo 9 hours. will! AA lithium primary batteries
Ovnmll Dimonsions
UR1H: 98min anomme17mm D
(3.34 x 2.33 x use in.)
Net Weight
97 g (3,4 oz.) without batteries
UR1H Transmitter RF Output
Connector: SMA
Actual Impedance: 50 rt
Pin Assignments: Shell Ground
Center e ignal
27A|19|5 (Fiev. 2)
©2000 snore incorporated
UR1 H Bodypack Transmitter
Addendum
Features
~ High RF power (250 mW)
~ Same audio performance as UR1
~ Operates with alkaline or lithium baneries
~ Rapid, two-way infrared (IR) data transmission
~ External DC power connection
~ Optional remote mount antenna
~ Belt clip
Warning: The UR1H belt clip must be installed as shown to ensure
oomplianca with FCC RF exposure guidelines ior sale use.
Saiety information
This equipment complies with Fcc radiation exposure limits set fonh for
an uncontrolled environment. This equipment is in direct contact with the
body of the user under normal operating conditions. This transmitter must
not be celocated or operating in conjunction with any other antenna or
transmitter.
For oooyuom operation. the UR1H has been tested and meets the
guidelines ior safe use when used properly with the belt clip supplied or
designated by Shore for use with this product. For sale use, do not remove
or alter the position at the belt clip other than as instructed.
UR1“ Transmitter Audio Input
ConnGctor: 4—Pln male mini connector (TMM)
Input Configuration: Unbalanced. active
Actual Impedance: >1 M0
Maximum input Level: +10 dBu (sen ty 0 dB) +20 man
(1 kHz, 11/0 THD) (sensitivity —10 dB)
TMM Connector Pin 1: Ground
pm “figment“ Pin 2: 45 VDC oias
Pin 3: Audio
Pin 4: Tied through active load (on main
board) to Ground
(On instrument adapter cable. Pin 4
floats)
REPLACEMENT PARTS AND ACCESSORIES
Furnlshnd Accessories n t — 9° ‘ ‘
Antenna. 518-578 MHz. [WW 4 47°
Antenna, 578-698 MHz.
Antenna, 740-365 MHz.
Threaded Locking Adaptor TAAF.
Optional Aoceoaoriea
Bodypack Puudl (Black)
Bodypack Pouch (White)
Ac to DC Power Supply
Antenna Accessories
UA710
LlA7ZD
UA730
WA340
MSBDB
MSBOW
P522
Note: SMA to adaptor (UA910) is required to connect the (ollwing
antenna accessories:
Antenna, 944.952 MHz UA740
Passive Directional Vindeband Antenna UAaeosws
(470-1100 MHz)
2 R. Coaxial Antenna Came, ENC-ENC (RGSSC/U) UAsuz
s (L Coaxial Antenna Cable, BNC-BNC (RGESC/U) mass
25 n. Coaxial Antenna Cable, snow: (Resxm) UA825
50 it. Coaxial Antenna Cable, ENC-ENC (Rssxrui UA850
100 it. Coaxial Antenna Cable. BNC—BNC (RGZ13/U) UAst 00
sum to one Adaptor UA910
fl ( E Printed in u,5,A.
Certification
UR1H meets the essential requirements otthe European RfitTTE Direcfive 99/5/EC (ETSI EN 300 422 Parts 1 St 2. Note: 250 mW RF output power,
EN 300 454 Parts1 & 2, EN 3014fi9 Parts1 & 9) and is eligible to carrythe CE marking. DD‘lt/gl H”
Certified under FCC Parts 74 (FCC lD: DDAUR1HA. DD4UR1HB, DD4UR1HC, DD4UR1HF). Certified by IC in Canada under RSS-123 and RSS-mZ
(IO:616A~UR1HA,S‘ISA-UR1HB, 615A~UR1HC). ér‘Aa- up,""
The "EU Declaration at Contnrmity" can be obtained from Shure Inc. or any 01 its European representatives. For Contact information please Visit
www.shure,oem
LICENSING INFORMATION:
Licensing: A ministerial license to operate this equipment may be required in oertaln areas. Consult your national authority tor possible requirements.
Changes or modifications not expressly approved by Shure incorporated could void your authority to operate the equipment, Licensing ot snure wireless
microphone equipment is the user‘s responsibility, and licensahlllty depends on the user’s classification and application, and on the selected lrequency.
Shure strongly urges the user to contact the appropriate teleoommunlcations authority concerning proper licensing, and before choosing and ordering
liequertues.
Information to User
This equipment has been tested and found to comply with the limits tor a Class B d‘ ital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable pmtecfion against harmful interierenoe in a residential installation. This equipment generates, uses and can radiate radio
lrcquency energy and, it not installed and used in accordance with the instructions, may cause hannlul interlerence to radio communications. However,
there is no guarantee that interlerence will not occur in a particular installation it this equipment does cause harmful interierenoe to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
tollowing measures:
- Relocate the receiving antenna.
. increase the separation between the equipment and recenrer.
~ Connect the equipment into art nude! on a circuit different from that to which the receiver is connected
~ Consult the dealer
This Class a digital apparatus complies with Canadian lessons.
Cat appateil numerique de la classe B est contorrne a la not-me NMB—OOB du Canada
Operation otihls device is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any
interlerenoe, including interterence that may cause undsslred operation of the device.
Mate: EM0 oontormance testing is based on the use of supplied and recommended cable types. The use ot other cable types may degrade EMC
performance
FCC and IC Radlaflun Exposuu Statement. for Mobile Devices (when used with the UABEOSWBI
This equipment camplies with FCC and IC radiation exposure limits Set forth for an uncontrolled environment, This aqulpment should be installed
and operated with minimum dismnue 200m between the radiator and your body, This transmitter must not be oo-lucaled or operating in conjunc-
tion with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 2
Creator                         : Canon iR3035
Create Date                     : 2010:02:05 12:43:51-06:00
Author                          : 
Producer                        : Canon iR3035
Title                           : 
Subject                         : Image

EXIF Metadata provided by EXIF.tools