Shure Music Mixer Scm800 Users Manual Specification Sheet

Shure SCM800 Specification Sheet us_pro_scm800_specsheet Shure - SCM800 - Specification Sheet

Shure SCM800 Specification Sheet us_pro_scm800_specsheet Shure - SCM800 - Specification Sheet

SCM800 to the manual 32ed2bf9-0a41-4d04-8be6-a044da27cef4

Shure SCM800 Specification Sheet us_pro_scm800_specsheet Shure - SCM800 - Specification Sheet

2015-02-02

: Shure Shure-Music-Mixer-Scm800-Users-Manual-491217 shure-music-mixer-scm800-users-manual-491217 shure pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadShure Shure-Music-Mixer-Scm800-Users-Manual- SCM800 Specification Sheet  Shure-music-mixer-scm800-users-manual
Open PDF In BrowserView PDF
SCM800/SCM800E Microphone Mixer
Specification Sheet
SCM800/SCM800E EIGHT-CHANNEL MICROPHONE MIXER

SYSTEM OVERVIEW
The Shure Model SCM800 is a full-featured, eight-channel microphone mixer for sound reinforcement, general audio recording, and
audio-visual systems. Any low-impedance, balanced dynamic or condenser microphone, including a wireless microphone system, can be
used with the SCM800 mixer.
Each SCM800 accepts up to eight microphone- or line-level inputs
and one aux-level input (two input jacks feed the same channel). Up
to four SCM800 mixers can be linked to provide up to 32 input channels. Each input channel has a two-band equalizer, switchable microphone- or line-level operation, switchable 48 V phantom power, and a
1/ -inch send/receive insert jack.
4
The SCM800 operates on 120 Vac power; the SCM800E operates
230 Vac power. Both models are supplied with rack-mounting hardware, link cable and removable block terminal connectors. An accessory rack panel adapter (Model RKC800, available separately)
converts the removable block input and output connectors to XLR
connectors, and the Aux connectors to phono jacks.

TL1030 (Rev. 3)
©2009 Shure Incorporated

FEATURES
•

Compatible with Shure SCM810 and FP410 automatic microphone mixers

•

Adjustable EQ per channel: low-frequency rolloff and
high-frequency shelving

•

48 V phantom power selectable for each input

•

Active balanced microphone- and line-level inputs and
line-level output

•

Highly RF-resistant chassis and circuitry

•

LED indication of channel clipping

•

Linking capability for systems up to 32 microphones

•

Two Aux-level input jacks that feed one channel

•

Insert jack on each channel

•

Manual mixing of input channels

•

Front-panel headphones output with level control

•

Peak-responding output limiter with selectable thresholds
and LED indicator

SCM800/SCM800E MICROPHONE MIXER SPECIFICATION SHEET
SPECIFICATIONS
Measurement Conditions (unless otherwise specified):
Line voltage 120 Vac, 60 Hz (SCM800) or 230 Vac, 50 Hz
(SCM800E); full gain; 1 kHz.
Source impedances: Mic 150 , Line 150 
Terminations: Line 10 k, Phones 300  tip-sleeve and
ring-sleeve), Direct Out 10 k
Equalization controls adjusted for flat response, Channel 1 gain
control full clockwise, other gain controls full counterclockwise
Frequency Response (Ref .1 kHz, channel controls centered)
50 Hz to 20 kHz 2 dB; -3 dB corner at 25 Hz
Voltage Gain (typical, controls full clockwise)
Output
Input

Line

Headphones

Direct Out

Low-impedance mic
(150 )

80 dB

88 dB

34 dB

Line

40 dB

48 dB

–6 dB

Aux

44 dB

52 dB

-

Send/Return

20 dB

28 dB

-

Impedance
Input

Designed for
use with

Actual
(typical)

Mic

19-600 

10 k

–15 dBV

Line

2 k
2 k
2 k

10 k

+22 dBV

10 k

+22 dBV

10 k

+18 dBV

Aux

Input
Clipping Level

Outputs
Impedance
Output

Polarity
Mic/Line, Send inputs to all outputs are non-inverting; Aux input
to all outputs is inverting
Overload and Shorting Protection
Shorting outputs, even for prolonged periods, causes no damage. Microphone inputs are not damaged by signals up to 3 V;
Line and Monitor inputs by signals up to 20 V
Equalization
Low-frequency: 6 dB/octave cut, adjustable corner from 25 to
320 Hz
High-frequency: 6 dB at 5 kHz, 8 dB at 10 kHz, shelving
Limiter
Type: Peak
Threshold: Switchable: off, +4, +8, +16 (dBm at output)
Attack Time: 2 ms
Recovery Time: 300 ms
Indicator: Lights red when limiting occurs
Input LEDs
Light at 6 dB below clipping

Inputs

Send/Return

Common Mode Rejection
>70 dB at 1 kHz

Designed for
use with

Actual
(typical)

Output
Clipping Level

Line

>600 

60 

+18 dBV

Headphones

8-200 ,
60 
recommended

300 

+12 dBV

Direct Out

>2 k

1 k

+18 dBV

Send/Return

>2 k

1 k

+18 dBV

Total Harmonic Distortion
<0.1% at +18 dBV output level, 50 Hz to 20 kHz (through 20
Hz-20 kHz filter; Input 1 and Master at 5, all other controls full
counterclockwise)
Hum and Noise
Equivalent Input Noise: –125 dBV (150  source; through 400
Hz—20 kHz filter)
Equivalent Input Hum and Noise: (150  source; through 20
Hz—20 kHz filter)
–123 dBV

Phantom Power
46 Vdc open-circuit through 6.8 k series resistance per DIN 45
596
Operating Voltage
SCM800: 120 Vac rated nominal (see Voltage Selection for 230
Vac operation), 50/60 Hz, 200 mA
SCM800E: 230 Vac rated nominal (see Voltage Selection for
120 Vac operation), 50/60 Hz, 100 mA
Temperature Range
Operating: 0 to 60 C (32 to 140 F )
Storage: -30 to 70 C (-22 to 158 F)
Overall Dimensions
44.5 mm H x 483 mm W x 317 mm D (13/4 x 19 x 121/2 in.)
Net Weight
4.3 kg (9 lb 9 oz)
Certifications
SCM800: UL LISTED (U.S.) and cUL Certified (Canada)
SCM800E: Conforms to European Union directives; eligible to
bear CE marking.

REPLACEMENT PARTS
Knob, Channel Gain & Phones (white) ........................ 95A8238
Knob, Master (blue) ..................................................... 95B8238
Line (Power) Cord (SCM800) .....................................95B8389*
Line (Power) Cord (SCM800E) ...................................95C8247*
Link Cable.................................................................... 95B8889
Three -Terminal Block Connector ................................ 95B8580

Output Hum and Noise (through 20 Hz—20 kHz filter; channel
controls full counterclockwise):
Master full counterclockwise: -90 dBV
Master full clockwise: -62 dBV

SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414
Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Format                          : application/pdf
Creator                         : Shure Incorporated
Title                           : Shure SCM800 Specification Sheet
Description                     : 
Create Date                     : 2009:10:22 18:23:55-05:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:11:18 10:22:27-06:00
Metadata Date                   : 2010:11:18 10:22:27-06:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:def66a74-e218-4f66-b275-1d54cc8de0b0
Instance ID                     : uuid:0f320c80-79cf-469c-82b3-8e3eeb64248b
Page Count                      : 2
Subject                         : 
Author                          : Shure Incorporated
Warning                         : [Minor] Ignored duplicate Info dictionary
EXIF Metadata provided by EXIF.tools

Navigation menu