Sichuan AI Link Technology WFM601UWH2 Wireless Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4109231
Application ID	F5FEEv+v5dc8XW3RaOD89Q==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	233.97kB (2924634 bits)
Date Submitted	2018-12-18 00:00:00
Date Available	2018-12-18 00:00:00
Creation Date	2018-12-10 18:09:29
Producing Software	Microsoft® Word 2013
Document Lastmod	2018-12-17 10:56:52
Document Title	Users Manual
Document Creator	Microsoft® Word 2013
Document Author:	bailang

AI-LINK
WF-M601-UWH2
Wireless Module
Features：
 Supported WLAN Standards
IEEE Std. 802.11b
IEEE Std. 802.11g
IEEE Std. 802.11n
 Chip Solution
MTK MT7601UN/B
 Size
45.0mm*70.0mm*7.3mm
Model Overview：
Module Name
Installation
Supported
Standards
Data
Rate(max)
Band
Antenna
Interface
Note
WF-M601-UWH2
Plugin
IEEE 802.11b/g/n
150Mbps
2.4 GHz
PCB ANT
5V power
supply
Sichuan AI-Link Technology Co.,Ltd
Add: Anzhou,Industrial park,Mianyang,Sichuan
Web: http://www.changhong.com
Tel: +86-13881190925
WF-M601-UWH2
Wireless Module
Feedback of customer’s Confirmation
We accept the specification after Confirmed
Customer name
Customer signature
Confirmation Date
Please feed back this paper and first paper after your signature by the address,thanks!
ADD： Anzhou,Industrial park,Mianyang,Sichuan
Factory： Sichuan AI-Link Technology Co.,Ltd.
Approved
Checked
Designed
Product
WiFi Module
Ding Shuang
Peng
Gao Tao
Model
WF-M601-UWH2
Date
2018-11-30
Sichuan AI-Link Technology Co., Ltd.
page 2 of 15
WF-M601-UWH2
Wireless Module
Record of Modification
No
Date of
modification
Main content of
modification
V1.0
20181130
Initial Release
Sichuan AI-Link Technology Co., Ltd.
Reason of
modification
Serial number of
modification
Confirm
Gao Tao
page 3 of 15
WF-M601-UWH2
Wireless Module
1. Brief description:
WIFI MODULE WF-M601-UWH2 is based on MTK MT7601UN/B complied with IEEE 802.11b/g/n standard from
2.4GHz-2.5GHz.Supported for 150Mbps high speed wireless network connection.
2.
Block diagram:
Figure 2.1 Block Diagram of MT7601
3. Package outline and Mounting:(units:mm)
Top View
Side View
NOTE:General tolerance ±0.3mm unless otherwise stated
Sichuan AI-Link Technology Co., Ltd.
page 4 of 15
WF-M601-UWH2
Wireless Module
4. Pin Definition:
number
definition
VCC
number
definition
DP
VCC
GND
DM
3D_SYNC
10
WOW
GND
REG_ON
RST
Pin Definition
5. Product Pictures
TOP VIEW
BOTTOM VIEW
Silk Introduction:
1.The characters is the version of PCB in the red box;
2.The characters is PCB flame retardant in the green box;
3.The characters is the manufacture date of PCB in the yellow box;
Sichuan AI-Link Technology Co., Ltd.
page 5 of 15
WF-M601-UWH2
Wireless Module
6. Key Materials
Item
Category
MPN
Description
MFR
IC
MT7601UN/B
40-QFN
MTK
PCB
JUI7.820.0416
FR-4,2LAY
Crystal
Oscillator
SMD 3225,40M,15pF
40M
Note
Sunlord
IQPCB
SHPCB
JWT
Hosonic
TXC
7. General Requirements:
No.
Feature
7-1
Operation Voltage
7-2
Current Consumption
7-3
Operation Temperature
7-4
Antenna Type
7-5
USB
7-6
Storage Temperature
Sichuan AI-Link Technology Co., Ltd.
Description
5V+/-0.5
210mA @TX HT40 MCS7 15dBm
242mA @TX CCK 11M 19dBm
0°C to +60°C
Integral antenna
High Speed USB 2.0 Interface
-40°C to +125°C
page 6 of 15
WF-M601-UWH2
Wireless Module
8. RF Characteristics:
8-1 IEEE 802.11b Section:
Items
Contents
Specification
Mode
Channel
Data rate
Min.
TX Characteristics
1. Power Levels(Calibrated)
1) For Each antenna port
2. Spectrum Mask @ target power
1) fc +/-11MHz to +/-22MHz
2) fc > +/-22MHz
3 Constellation Error(EVM)@ target power
1) 1Mbps
2) 2Mbps
3) 5.5Mbps
4) 11Mbps
4. Frequency Error
RX Characteristics
5 Minimum Input Level Sensitivity(each chain)
1) 1Mbps (FER ≦8%)
2) 2Mbps (FER ≦8%)
3) 5.5Mbps (FER ≦8%)
4) 11Mbps (FER ≦8%)
6 Maximum Input Level (FER ≦8%)
Sichuan AI-Link Technology Co., Ltd.
IEEE802.11b
CCK
CH1 to CH13
1, 2, 5.5, 11Mbps
Typ.
Max.
Unit
13
15
17
dBm
-30
-50
dBr
dBr
-10
Min.
-5
Typ.
-10
-10
-10
-10
10
Max.
dB
dB
dB
dB
ppm
Unit
-83
-80
-79
-76
dBm
dBm
dBm
dBm
dBm
-10
Remark
page 7 of 15
WF-M601-UWH2
Wireless Module
8-2 IEEE 802.11g Section:
Items
Contents
Specification
Mode
Channel
Data rate
Min.
TX Characteristics
1. Power Levels
1) For Each antenna port
2. Spectrum Mask @ target power
1) at fc +/-11MHz
2) at fc +/-20MHz
3) at fc > +/-30MHz
3 Constellation Error(EVM)@ target power
1) 6Mbps
2) 9Mbps
3) 12Mbps
4) 18Mbps
5) 24Mbps
6) 36Mbps
7) 48Mbps
8) 54Mbps
4 Frequency Error
RX Characteristics
5 Minimum Input Level Sensitivity(each chain)
1) 6Mbps (PER ≦10%)
2) 9Mbps (PER ≦10%)
3) 12Mbps (PER ≦10%)
4) 18Mbps (PER ≦10%)
5) 24Mbps (PER ≦10%)
6) 36Mbps (PER ≦10%)
7) 48Mbps (PER ≦10%)
8) 54Mbps (PER ≦10%)
6 Maximum Input Level (PER ≦10%)
Sichuan AI-Link Technology Co., Ltd.
IEEE802.11g
OFDM
CH1 to CH13
6, 9, 12, 18, 24, 36, 48, 54Mbps
Typ.
Max.
Unit
11
13
15
dBm
-20
-28
-40
dBr
dBr
dBr
-10
Min.
-5
Typ.
-5
-8
-10
-13
-16
-19
-22
-25
10
Max.
dB
dB
dB
dB
dB
dB
dB
dB
ppm
Unit
-85
-84
-82
-80
-77
-73
-69
-65
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
Remark
page 8 of 15
WF-M601-UWH2
Wireless Module
8-3 IEEE 802.11n HT20 Section:
Items
Specification
Mode
Channel
Data rate (MCS index)
TX Characteristics
2. Power Levels
1) For Each antenna port
3. Spectrum Mask @target power
1) at fc +/-11MHz
2) at fc +/-20MHz
3) at fc > +/-30MHz
4. Constellation Error(EVM)@ target power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
5. Frequency Error
RX Characteristics
6. Minimum Input Level Sensitivity(each chain)
1) MCS0 (PER ≦10%)
2) MCS1 (PER ≦10%)
3) MCS2 (PER ≦10%)
4) MCS3 (PER ≦10%)
5) MCS4 (PER ≦10%)
6) MCS5 (PER ≦10%)
7) MCS6 (PER ≦10%)
8) MCS7 (PER ≦10%)
7. Maximum Input Level (PER ≦10%)
Sichuan AI-Link Technology Co., Ltd.
Contents
IEEE802.11n HT20 @ 2.4GHz
OFDM
CH1 to CH13
MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15
Min.
Typ.
Max.
Unit
Remark
Min.
Typ.
Max.
Unit
10
12
14
dBm
-20
-28
-45
dBr
dBr
dBr
-10
Min.
Typ.
-5
-10
-13
-16
-19
-22
-25
-28
10
Max.
dB
dB
dB
dB
dB
dB
dB
dB
ppm
Unit
-82
-79
-77
-74
-70
-66
-65
-64
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
page 9 of 15
WF-M601-UWH2
Wireless Module
8-4 IEEE 802.11n HT40 Section:
Items
Specification
Mode
Channel
Data rate (MCS index)
TX Characteristics
1. Power Levels (Calibrated)
1) For Each antenna port
2. Spectrum Mask @target power
1) at fc +/-22MHz
2) at fc +/-40MHz
3) at fc > +/-60MHz
3. Constellation Error(EVM)@target power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
4. Frequency Error
RX Characteristics
5. Minimum Input Level Sensitivity(each chain)
1) MCS0 (PER ≦10%)
2) MCS1 (PER ≦10%)
3) MCS2 (PER ≦10%)
4) MCS3 (PER ≦10%)
5) MCS4 (PER ≦10%)
6) MCS5 (PER ≦10%)
7) MCS6 (PER ≦10%)
8) MCS7 (PER ≦10%)
6. Maximum Input Level(PER ≦10%)
Sichuan AI-Link Technology Co., Ltd.
Contents
IEEE802.11n HT40 @ 2.4GHz
OFDM
CH3 to CH11
MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15
Min.
Typ.
Max.
Unit
Remark
Min.
Typ.
Max.
Unit
10
12
14
dBm
-20
-28
-45
dBr
dBr
dBr
-10
Min.
-5
Typ.
-5
-10
-13
-16
-19
-22
-25
-28
10
Max.
dB
dB
dB
dB
dB
dB
dB
dB
ppm
Unit
-79
-76
-74
-71
-67
-63
-62
-61
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
page 10 of 15
WF-M601-UWH2
Wireless Module
9. Software Requirements
The driver supports the following operating systems: Linux, Microsoft Windows XP, Vista and Win7.
Mfg. software tool version is MT7601 USB QA V1.0.9.0 or later.
10.
Refelow Standard Condition
11.
Mechanical, Environmental and Reliability Tests
Test Items
4-1
Drop test
4-2
Vibration test
4-3
Impact test
Test Conditions
The packed samples within
100Kg can be tested
Drop height:
Face Side: 800/600/450mm
Edge line: 600/450/350mm
Drop time: 1 each Face and
edge.
X-Y-Z direction, first
Frequency changing from
10Hz to 30Hz to 10Hz
,amplitude 0.75mm, 5 times
vibrations, then frequency
Changing from 30Hz to 55
Hz to 30 Hz, amplitude
0.15mm, 5 time vibration.
Impact acceleration:
50m/sec2;
Impact duration: 16ms；
Impact times: 1000.
Sichuan AI-Link Technology Co., Ltd.
Qty
Criteria Condition
1xBox
After drop test, the outer box and inner box will
not been broken by appearance visual
inspection.
After test, the Appearance, Power EVM and
Frequency error shall be satisfied with the
specification.
After test, the Appearance, Power EVM and
Frequency error shall be satisfied with the
specification.
page 11 of 15
WF-M601-UWH2
Wireless Module
4-4
Soldering ability
test
4-5
Humidity test
1. After soldering, the soldered area must be
covered by a smooth bright solder layer, some
deficiencies such as a small amount of the
pinhole, not wetting are allowed, but the
deficiencies can not be in the same place；
2. At least 90% of soldered area shall be
covered continuously by the soldering material.
Leave samples in 40±3℃,
93% RH @ 96 hours
Leave samples in standard test condition for 2
hours then test, the Appearance, Power, EVM
and Frequency error functional parameter shall
be satisfied with the test specification.
60
After test, leave samples in standard condition
for 1 hour and test, Power, EVM and Frequency
error shall be satisfied with the test specification.
Soldering temperature:
235±5℃
Soldering duration:
2±0.5S
4-6
High temperature
load life test
Thermostat cabinet
temperature: 55±5℃
Applied voltage:
110% rated voltage
Working duration: 200 hour
(Supply Voltage Cycle
23h power on, 1h power off)
4-7
High temperature
load test
Temperature: 55±5℃
Samples work for 16 hours
After test, the Appearance, Power, EVM and
Frequency error shall be Satisfied with the test
specification.
4-8
Low temperature
storage test
Leave the samples in
-25±3℃@24 hours
Leave samples in standard test condition for 2
hours then test, the Appearance, Power, EVM
and Frequency error shall be satisfied with the
test specification.
4-9
Low temperature
load test
Leave samples in
-15±3℃@ 2 hours,
samples’ function
shall be normal, the let
samples work for 1 hour
After test, leave the samples in standard
condition and tested the Appearance, Power,
EVM and Frequency error shall be satisfied with
the test specification.
4-10
Temperature circle
test
One cycle duration
-10±3 ℃ @3H
40±3 ℃ @3H
Total cycle: 10x
After test, leave the samples in standard
condition and tested Power EVM and Frequency
error shall be qualified and all the characters
shall be satisfied with the test specification.
4-11
Continuous
TP test
Twice cycle duration
-10±3 ℃@4H
+60±3℃@4H,
+25@2H@2H
During test, There will not been appeared signal
disconnection or interruption between DUT and
AP.
Discharge voltage: 2kV
C: 150pF
Discharge resistance：330Ω
Positive10 times
1 time for each second
The products can recoverable smoothly after
ESD test.
4-12
ESD
Sichuan AI-Link Technology Co., Ltd.
page 12 of 15
WF-M601-UWS2
Wireless Module
12.Package
（1）Tray Dimensions
（2）the Direction of Product in Tray
Si
Sichuan
chuan AI
AI--Link Technol
Technolog
ogy
y Co., Ltd
td..
page 13 of 15
WF-M601-UWS2
Wireless Module
NB Statement
Herby,Sichuan AI-Link Technology Co., Ltd. declares that this Wireless Module，WF-M601-UWH2 is
in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
In accordance with Article 10(2) and Article 10(10), this product allowed to be used in all EU member
states.
Use the Wireless Module in the environment with the temperature between 0℃ and 60℃
Operation Frequency:2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20))
2422MHz~2462MHz (802.11n(HT40))
Max Output Power: 0.0222W
Manufacturer: Sichuan AI-Link Technology Co., Ltd.
Address: Anzhou, Industrial park, Mianyang, Sichuan, China
Tel: +860816-2438701
Fax: +860816-2438701
E-mail: caixia.hu@changhong.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Sichuan
Si
chuan IAI--Link Tec
Technol
hnolog
ogy
y Co., Ltd.
td.
page 14 of 15
WF-M601-UWS2
Wireless Module
Si
Sichuan
chuan AI
AI--Link Technol
Technolog
ogy
y Co., Ltd
td..
page 15 of 15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : bailang
Title                           : 技术规格书模板文件
Create Date                     : 2018:12:10 18:09:29+08:00
Creator Tool                    : Microsoft® Word 2013
Modify Date                     : 2018:12:17 10:56:52+08:00
Metadata Date                   : 2018:12:17 10:56:52+08:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:caf51d91-b531-485e-96d2-42b3ad7fcdd1
Instance ID                     : uuid:3d760b63-2bcf-4207-bcda-e5bf42192fd9
Page Count                      : 15
Author                          : bailang

EXIF Metadata provided by EXIF.tools