Sichuan Changhong Electronic Component M603USA1 WLAN 802.11b/g/n module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3242242
Application ID	XZrRBCQIFQZ5ynLkDxX/oQ==
Document Description	15_WIFI-2-M603USA1 UserMan,r2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	123.31kB (1541369 bits)
Date Submitted	2016-12-29 00:00:00
Date Available	2016-12-29 00:00:00
Creation Date	2016-10-19 10:51:15
Producing Software	Microsoft® Word 2010
Document Lastmod	2016-12-29 10:07:21
Document Title	Users Manual
Document Creator	Microsoft® Word 2010
Document Author:	bailang

WIFI-2-M603USA1
WLAN 802.11b/g/n module
特性 Features：
 接收制式 Reserving System
IEEE Std. 802.11b
IEEE Std. 802.11g
IEEE Std. 802.11n
 芯片方案 Chip Solution
MTK MT7603U
 结构大小 Size
20mm x 16mm x 3.5mm
四川长虹电子部品有限公司
Sichuan Changhong Electronic Component Co., Ltd.
地址 Add : 四川省绵阳市安县花荄镇罗胜街
Luosheng street,Huagai Zhen, Anxian, Mianyang, Sichuan, China
传真 Fax : +86-0816-2410643
网
址: http://www.changhong.com
WIFI-M603USA1
WLAN 802.11b/g/n module
1. 简介: Brief description:
WIFI MODULE WIFI-2-M603USA1 is based on MTK MT7603U.complied with IEEE 802.11b/g/n
standard from 2.4GHz.Supported for 300Mbps high speed wireless network connection.
1.2 Specification reference
This specification is based on additional references listed below.
_ IEEE Std. 802.11b
_ IEEE Std. 802.11g
_ IEEE Std. 802.11n
1.3 System Functions
Table1: General Specification as below:
Main Chipset
Operating Frequency
WiFi Standard
Modulation
Dimension
MTK MT7603U
2.412~2.472GHz
802.11b/g/n(2x2)
11b: DBPSK, DQPSK and CCK and DSSS 11g: BPSK, QPSK,
16QAM, 64QAM and OFDM 11n: MCS0~15 OFDM
11b:1, 2, 5.5 and 11Mbps 11g:6, 9, 12, 18, 24, 36, 48 and 54
Mbps 11n: MCS0~15, up to 150Mbps
6pin
USB 2.0
4-layers design
Typical，
20mmx 16mm x 3.7mm
Operation Temperature
0℃ to +60℃
Storage Temperature
Operation Voltage
-15℃ to +45℃
3.3V +/-10% （Ripple: ≤30mVp-p）
Data rates
Form factor
Host Interface
PCB Stack
Ratings
3.3V
500mA
2. 原理图: Block diagram:
四川长虹电子部品有限公司
Sichuan Changhong Electronic Component Co., Ltd.
page 2 of 4
WIFI-M603USA1
WLAN 802.11b/g/n module
3. 外型及安装尺寸: Package outline and Mounting:
Typical Dimension (W x L ): 20mmx 16mm x 3.7mm
PCB Thickness: 1mm
Comments: All dimension tolerance should reference +/-0.15mm
5. 引脚定义: Pin Definition:
Pin
Symbol
1,3,4,6
10
11
12
GND
ANT0
ANT1
GND
D+
DVCC
SLEEP
Wake
Description
Connected to Ground
Antenna 0
Antenna 1
Connected to Ground
USB Data DP
USB Data DN
+3.3V DC Power supply input
WiFi sleep
WiFi wake Host
四川长虹电子部品有限公司
Sichuan Changhong Electronic Component Co., Ltd.
page 3 of 4
WIFI-M603USA1
WLAN 802.11b/g/n module
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This modular complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Note 1: Compliance of this device in all final host configurations is the responsibility of the
Grantee. OEM integrators are responsible to satisfy RF exposure requirements. SAR evaluation is
valid for mobile applications.
Note 2: Any modifications made to the module will void the Grant of Certification, this module is
limited to OEM installation only and must not be sold to end-users, end-user has no manual
instructions to remove or install the device, only software or operating procedure shall be placed
in the end-user operating manual of final products.
Note 3: The device must not transmit simultaneously with any other antenna or transmitter.
Note 4: To ensure compliance with all non-transmitter functions the host manufacturer is
responsible for ensuring compliance with the module(s) installed and fully operational. For
example, if a host was previously authorized as an unintentional radiator under the Declaration
of Conformity procedure without a transmitter certified module and a module is added, the host
manufacturer is responsible for ensuring that the after the module is installed and operational
the host continues to be compliant with the Part 15B unintentional radiator requirements. Since
this may depend on the details of how the module is integrated with the host, Sichuan
Changhong Electronic Component Co., Ltd. shall provide guidance to the host manufacturer for
compliance with the Part 15B requirements.
Note 5: FCC ID label on the final system must be labeled with “Contains FCC ID: 2AC49-M603USA1”
The transmitter module must be installed and used in strict accordance with the manufacturer's
instructions as described in the user documentation that comes with the host product. Sichuan
Changhong Electronic Component Co., Ltd. is responsible for the compliance of the module in all
final hosts.
四川长虹电子部品有限公司
Sichuan Changhong Electronic Component Co., Ltd.
page 4 of 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : bailang
Create Date                     : 2016:10:19 10:51:15+08:00
Modify Date                     : 2016:12:29 10:07:21+08:00
Has XFA                         : No
Language                        : zh-CN
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : bailang
Title                           : 技术规格书模板文件
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2016:12:29 10:07:21+08:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:5c88055f-2a20-47c7-b619-bb2432200b2b
Instance ID                     : uuid:4263bd54-8b64-4db5-86c6-ee606dce7036
Page Count                      : 4

EXIF Metadata provided by EXIF.tools