Siemens Canada Siemens Milltronics Process Instruments LR260 SITRANS LR260 Level Probing Radar User Manual LR250OpenAirDeclarationx

Download:
Mirror Download [FCC.gov]
Document ID	2338084
Application ID	knTeQrPesmrl7G+GgPGPlg==
Document Description	User Manual-Addendum
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.58kB (57248 bits)
Date Submitted	2014-07-28 00:00:00
Date Available	2014-07-28 00:00:00
Creation Date	2014-07-07 11:28:33
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2014-07-07 11:28:33
Document Title	Microsoft Word - LR250OpenAirDeclaration.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	z000ek6v

Declaration to FCC Rule 15.256
For open air installations, the following conditions must be observed:
The following warning note is applicable to Section 2.1.3, FCC Conformity in place of the current content.
Affected manuals are:
 A5E32220602 (SITRANS LR250 Hart/mA) (page 14)
 A5E32221386 (SITRANS LR250 PROFIBUS) (page 14)
 A5E32221411 (SITRANS LR250 Foundation Fieldbus) (page 13)
 A5E32337683 (SITRANS LR260 Hart) (page 1)
 A5E32337685 (SITRANS LR260 PA) (page 1)
WARNING
Changes or modifications not expressly approved by Siemens Milltronics could void the user’s authority to operate
the equipment.
Notes





This device has been tested and found to comply with the limits Class B digital device part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This device has also been tested and found to comply with the limits §15.256, Subpart C-Intentional
radiators, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This device generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications, in
which case the user will be required to correct the interference at his/her own expense.
This device is certified to measure levels in fixed or mobile enclosed tanks made from metal, concrete
or materials with similar RF attenuating properties.
Devices equipped with the 3 inch or 4 inch antennas may be used to measure levels in open air
environments or outside enclosed tanks, subject to the following conditions:
o Devices shall be installed and maintained to ensure a vertically downward orientation of the
transmit antenna’s main beam.
o Devices shall be installed only at fixed locations. Devices shall not operate while being moved
or while inside a moving container.
o Hand-held applications and residential use are prohibited.
Peterborough, June 30, 2014
Siemens Canada Limited
Siemens Milltronics Process Instruments
1954 Technology Drive, P.O. Box 4225
Peterborough, Ontario
K9J 7B1 / Canada
Tel.: (705) 745-2431
Fax: (705) 741-0466
www.siemens.com/sensorsystems

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : z000ek6v
Create Date                     : 2014:07:07 11:28:33-04:00
Modify Date                     : 2014:07:07 11:28:33-04:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Microsoft Word - LR250OpenAirDeclaration.docx
Creator                         : z000ek6v
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:4d3a130d-6ca8-4bb3-9421-acd039c28858
Instance ID                     : uuid:563033d1-d6ee-4fc6-b5df-fbe91c12ca00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools