Siemens Information and Communication Mobile 1408 Spread Spectrum Cordless Phone System User Manual Register
Siemens Information and Communication Mobile LLC Spread Spectrum Cordless Phone System Register
Contents
- 1. 4000 Handset User Manual
- 2. 4010 Base Instruction manual
- 3. 4200 Handset user manual
4010 Base Instruction manual
s
Be inspired
Operating Instructions
and safety precautions
!
2
Gigaset 4000 Comfort, IM1-eng., A31008-G4000-B002-1-6Z19
4000cou.fm 12.04.01
Brief overview
Control key and display keys
The display is protected by a plastic film.
Remove the plastic film.
123
ABC DEF
INT
456
JKL MNOGHI
789
TUV WXYZPQRS
0
Open directory
End call and
On/Off key
Ta l k key
Sel Services key
Open network access list
Caller list/
message list
–End
call
– Cancel
function
– Back one
menu level
(press
briefly)
– Return to
idle status
(hold down)
– On/off in idle
status (hold
down)
Handsfree key
Switch from
handset to
handsfree talking
Keypad protection
on/off
Hold down
– Accept
call
–Dial
number
Ringer on/off
Hold down
Charging status
flat " 1/3
full 2/3
flashes: Caution
The display key
s
give you access
to the functions
shown in the
display.
Signal strength
Control key
Status LED
Display keys
Lights up during a call;
flashes for:
– incoming calls
– new messages
– alarm calls, appoint-
ments, anniversaries
Microphone
U"
Annabelle
19.07.01 13:13
/A
Key 1
Hold down
to select answering
machine/mailbox
INT
The right display key lets
you perform functions,
some of which can also
be controlled with the
control key.
The Control is shown as
follows in the operating in-
structions:
/ (left/right)
/ (up/down)
Press down on the side
with the arrow filled in.
Control key
Display keys
3
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000CoU.fm 12.04.01
Important menus
Display symbols
The following symbols appear above the display keys
depending on the situation:
Display
keys Meaning
@Menu key: Activates the main menu when the
phone is idle. During a call, it activates a menu
for the particular situation.
Selects and confirms the menu function.
Ends and saves an entry.
Delete key (Backspace): Deletes characters
from right to left.
0Automatic redial key: Opens a list of the last
five numbers dialled.
Displayed if SMS, answering machine, mail
service box or caller list is active
ROne menu level back, cancel
A
Text Message
Select Services
Family/Fun
Calendar/Clock
Sound Settings
Call Charges
2.Ö
H/Set Settings
Base Settings
Answer Machine
Handset Volume
Ringer Settings
Advisory Tones
New Entry
Anne
Barbara
Chris
:
A
Display Number
Delete Entry
Copy Entry
Delete List
Copy List
Available Memory
4
Gigaset 4000 Comfort, IM1-eng., A31008-G4000-B002-1-6Z19
4000cou.fm 12.04.01
Safety precautions
Only use the power supply unit supplied as
indicated on the underside of the device.
Only insert approved rechargeable batteries
of the same type. Never use ordinary (non-
rechargeable) batteries as they may pose a
health hazard or cause injury.
Make sure the rechargeable batteries are
inserted the right way round (as indicated in the
battery compartment),
Use the batteries specified in these operating
instructions (as indicated in the battery com-
partment)
The phone may affect medical equipment so
always switch your phone off before entering
hospitals or doctors’ practices.
The handset may cause an unpleasant hum-
ming noise in hearing aids.
Do not operate the phone in places where
there is a risk of explosion (such as paint work-
shops).
The handset is not splash-proof.
Drivers must not use the phone while driving
(including the walkie-talkie function).
The phone must be switched off at all times in
an aircraft (including the walkie-talkie function).
Make sure it cannot be switched on acciden-
tally.
If you give your Gigaset to someone else you
should also give them the operating instruc-
tions.
Dispose of batteries and the phone carefully.
Do not pollute the environment.
Not all the functions described in these operating instruc-
tions are available in all countries.
!
7
8
5
1
Gigaset 4000 Comfort, Inland, AXXXXX-G4000-BXXX-X-XX
4000coivz.fm 12.04.01
Gigaset 4000 Comfort, IM1-eng., AXXXXX-G4000-BXXX-X-XX 12.04.01
Contents
Brief overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Control key and display keys . . . . . . . . . . . . . . . . . . 2
Important menus . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Display symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparing the handset . . . . . . . . . . . . . . . . . . . . . . 2
Delivery package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Inserting the batteries (automatic registration) . . . . . 2
Charging the batteries . . . . . . . . . . . . . . . . . . . . . . . . 2
Attaching the belt clip . . . . . . . . . . . . . . . . . . . . . . . . 3
Switching the handset on and off . . . . . . . . . . . . . . . 3
Setting the date and time . . . . . . . . . . . . . . . . . . . . . 4
Activating/deactivating the keypad lock . . . . . . . . . . 5
Changing the display language . . . . . . . . . . . . . . . . . 5
Registering the handset. . . . . . . . . . . . . . . . . . . . . 6
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Making an external call . . . . . . . . . . . . . . . . . . . . . . . 7
Making internal calls . . . . . . . . . . . . . . . . . . . . . . . . . 7
Answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Open caller list/message list . . . . . . . . . . . . . . . . . . . 8
Handsfree talking . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Forwarding an external call, enquiry call . . . . . . . . . . 9
Automatic redial . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Directory and network access list. . . . . . . . . . . . 11
Speed dialling from the network access list . . . . . . 12
Dialling with speed dialling . . . . . . . . . . . . . . . . . . . 12
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting the alarm clock . . . . . . . . . . . . . . . . . . . . . . 17
Activating the alarm clock . . . . . . . . . . . . . . . . . . . . 17
Deactivating the alarm clock . . . . . . . . . . . . . . . . . . 17
Turning off the alarm call. . . . . . . . . . . . . . . . . . . . . 18
Setting an appointment . . . . . . . . . . . . . . . . . . . . . . 18
Handset and loudspeaker volume. . . . . . . . . . . . . . 19
Activating/deactivating warning and signal tones . . 21
Auto talk feature on/off . . . . . . . . . . . . . . . . . . . . . . 21
Resetting to the factory defaults. . . . . . . . . . . . . . . 22
Room monitoring (babyphone). . . . . . . . . . . . . . 22
Setting the room monitor . . . . . . . . . . . . . . . . . . . . 23
Walkie-talkie mode. . . . . . . . . . . . . . . . . . . . . . . . 24
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Operating on base stations in the Gigaset family . . 25
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Preparing the handset
Delivery package
Gigaset 4000 Comfort handset, two batteries, charg-
ing unit, belt clip, operating instructions.
Inserting the batteries (automatic registration)
●Make sure you insert the batteries the right way
round – see diagram on the left.
●Replace the cover and push gently upwards until it
clicks into place.
●To o p e n press the grooved area on the cover and
slide back.
Charging the batteries
Leave the handset for approx. five hours in
the base station/charging unit to charge the
batteries, as they are not charged when
they leave the factory. The charging status
icon flashes on the handset to indicate that
the batteries are being charged:
Before activating your handset, place
it in the Gigaset 4010/4015 Comfort
base station with the display facing
upwards. The handset is automati-
cally registered; this is shown on the
display (e.g. INT1)
If registration is successful you will hear a confirma-
tion tone (rising sequence).
Batt. flat
(battery symbol flashes) Batteries 2/3 charged
"Batteries 1/3 charged Batteries full
+
–+
–
'
Y
5 h
3
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
See the appendix for a list of recommended batteries.
Attaching the belt clip
Push the belt clip onto the back of the handset until
the lugs at the side click into place.
Switching the handset on and off
To switch the handset on and off,
hold down the end call key until
you hear a confirmation beep (ris-
ing tone sequence).
●Once the initial charging process is completed you
can replace your handset in the base station/
charging unit after each call. Charging is controlled
electronically. This ensures optimum charging and
prolongs battery life.
●The batteries heat up during charging. This is nor-
mal and not dangerous.
●Opening the battery compartment unnecessarily
may cause the wrong charging status to be dis-
played.
The handset is switched on as soon as you insert the
batteries and place the handset in the base station/
charging unit.
4
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Setting the date and time
You need to set the date and time so that the time that
messages and calls are received is shown correctly.
AOpen the menu.
Calendar/Clock
Select and confirm.
Date/Time
Select and confirm.
The current setting is shown.
Enter the date
Enter the day/month/year.
In this case 20.05.2001.
e. g.9[[<[
Go down one line.
Enter the time
Enter hours and minutes.
In this case 19:05
e. g. D[<
Go down one line.
Select the display mode
use the left side of the control
key to select the 12-hour mode
(am or pm) or the 24-hour mode
(default).
$,;0 Save the settings.
5
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Activating/deactivating the keypad lock
You can disable the handset keypad. If there is an in-
coming call, the key lock is automatically deactivated
and re-activated after the call has ended.
}To activate/deactivate, hold
down key
Accepting a call: Press the talk key E.
Changing the display language
AOpen the menu.
H/Set Settings
Confirm the function.
Language
The current language is marked
with a '.
Select the language you want
and confirm.
Displays for language settings:
Dialling an emergency number
You can dial the emergency numbers saved in the
base station even if the telephone lock is activated.
Please refer to the operating instructions for your base
station.
Einstellungen Sprache Deutsch
H/Set Settings Language English
Réglages comb. Langue Français
Impostazioni Lingua Italiano
Ajuste terminal Idioma Español
Programações Língua Português
Instell. Handset Ta a l Nederlands
Instil håndsæt Sprog Dansk
Håndsett innst. Språk Norsk
Inställn. handenh Språk Svenska
Luurin asetuk. Kieli Suomi
Nastav. pren.c. Jazyk Cesky
Ust. sluchawki Jezyk Polski
El Cihazi Yyari Dil seçimi Türkçe
6
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Registering the handset
To make calls with your handset, you must “intro-
duce” it to its base station (registering)
●if your handset has already been registered at a dif-
ferent base station (steps 1
, 2 and 3) or
●if you want to register the handset as a new hand-
set at a Gigaset base station of an older Gigaset
range (steps 1 and 3).
Step 1: On the base station or on the base station
telephone:
Step 2: On the handset:
APress the display key.
H/Set Settings
Select and confirm.
Register H/Set
Select and confirm.
Select the base station.
Step 3: On the handset:
)Enter the system PIN and con-
firm (factory setting 0000) – e.g.
is displayed.
Your handset is now ready for operation!
Gigaset On the base station or base telephone
4010/4015 Hold down the key on the underside of the
base station.
3010/3015 Hold down the paging-key. on the base
station until you hear signal tones.
3020/25
3030/35
4030/35
Select VHWWLQJV, V\VWHPVHWWLQJV and UHJLVWHU
KDQGVHW in the menu at the base station
telephone and confirm with 2..
3070/75
4070/75
Press the LED – it will flash during regis-
tration.
Non-Sie-
mens base
stations
To register at “GAP base stations”, follow
the relevant operating instructions
(steps 2 and 3).
Regstr.Procedure Base
Your handset can be registered at up to four base sta-
tions.
7
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Making calls
Making an external call
)Enter the telephone number. If
you make a mistake use the
keyto correct individual digits.
!Press the talk key.
Press the end call key to end the
call.
Making internal calls
)Open the list of internal users.
Your own handset is identified
by “<".
! Select the handset you want and
press the talk key.
or e. g. sEnter the internal number of the
handset.
or
!
or ~All handsets are called.
Press the end call key to end
the call.
●You can also press the talk key !first and then
enter the telephone number - each digit will be di-
alled immediately.
●You can cancel the dialling operation by pressing
the end call key .
●You can insert a pause: After entering the prefix,
open the menu using the display key Aand select
“insert pause”.
Call All
8
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Answering a call
Your telephone will ring (ringing tone) and the status
LED will flash.
!/ WPress the talk key or handsfree
key.
or £M Simply remove the handset from
the base station/charging unit
(factory setting: “Auto talk”).
Open caller list/message list
A message appears in the display and the status LED
flashes to indicate that there are new calls/messages.
"Press
Handsfree talking*
Handsfree talking offers the following advantages:
●Before dialling, you can hear the dial tone without
having to lift the handset to your ear.
●Other people can listen in and join in the call.
●You can place the handset on any convenient sur-
face or replace it in the base station/charging unit
with the handsfree key pressed.
Handsfree talking when dialling
)Dial the telephone number.
,Press the handsfree key.
* Not available in all countries
When handsfree talking is activated, the handsfree
key ,and the status LED lights up.
9
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Handsfree talking during a call
,Activate handsfree talking.
To set the volume:
Press the handsfree key ,
once more.
End the call.
Forwarding an external call, enquiry call
You can forward an external call to another handset or
make an internal enquiry call.
)Open the list of internal users.
! Select the internal user and call.
If the internal user answers:
●To f o r w a r d t h e c a l l : Press the end call key .
●To end the enquiry call: Use (QG to return to the
waiting party.
Automatic redial
Manual redial
You have access to the last five telephone numbers di-
alled.
/Display and select the telephone
number.
!Press the talk key.
6DYH
!
Raise or lower the volume.
Save the volume level.
Change from handsfree talking to
the handset
10
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Automatic redial
The handsfree key flashes and open listening is acti-
vated. The function is deactivated after ten unsuc-
cessful call attempts or if a call was made in the
meantime.
Press 2II or any key if the person you called is not avail-
able.
/Display and select the telephone
number.
AOpen the menu.
Automatic Redial
Activate.
!If the other person answers press
the talk key.
Deleting a number from the redialling list
/Display and select the telephone
number.
AOpen the menu.
Delete Entry
The telephone number is
deleted.
Copying a telephone number to the directory
/Display and select the telephone
number.
AOpen the menu.
Copy to Directory
The telephone number is
entered.
)If you like you can change the
number and enter a name (you
can also enter an anniversary
s. page 16).
For notes on how to enter letters
and characters s. page 13.
AOpen the menu.
Save Entry
Save the entry.
This function is not available in all countries.
11
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Directory and network access list
With the ' directoryyou can store up to 200 tele-
phone numbers and then dial them at the push of a
button.
You can save the prefixes (Call-by-Call) of telephone
companies in the network access list . The direc-
tory and network access list are used in exactly the
same way.
Storing an entry
'/ &Open the directory/network
access list.
New Entry
Select the menu item and con-
firm.
)Enter the telephone number
(no more than 32 digits).
-)Scroll to the name field and enter
the name. You can also enter an
anniversary in the directory, see
also page 16.
AOpen the menu.
Save Entry
Store the entry
Dialling with the directory
'Open the directory.
e. g.
Enter the first letter of the name.
For example for “E” press
the keytwice or scroll
with the 'key.
!Press the talk key.
______
* Not available in all countries
After selecting the name you can also open the menu,
select , extend/change the number
and dial with the talk key !.
Display Number
12
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Dialling with the network access list
(Call-by-Call)
&Open the network access list.
'ASelect call-by-call number and
open the menu.
Display Number
Select the menu item and
confirm.
)!Enter the telephone number of
the person you want to call.
or
''Select the telephone number in
directory and confirm.
!Press the talk key. The telephone
number is dialled.
Speed dialling from the network
access list
You can store 8 speed dialling numbers in the network
access list. Enter a speed dialling number (2–9) before
the name.
Dialling with speed dialling
e. g.
sHold down the key:
The stored network provider's
name is displayed.
e. g.
)Enter the telephone number
or
''Select an entry from the directory
and confirm.
!Press.
Example: Press speed dial key 2 and then enter the
network provider's name.
13
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Character map
Press the relevant key repeatedly or hold down:
Sort sequence:
1 x 2 x 3 x 4 x 5 x 6 x 7 x 8 x 9 x 10 x
61\£$¥
9abc2äáàâãç
def 3ëéèê
;gh i 4 ï í ì î
<jkl5
=mno6öñóòôõ
>pqr s7ß
?t u v 8 ü ú ù û
Dwx y z 9 ÿ ý æø å
Ca→A*
/()<=>%
[. , ? ! 0 + - : ¿ ¡ *
*
Other characters on this key: “,‘,;,_
B# @ \ & §
The first letter of the name is automatically written
in uppercase and the rest in lowercase.
To change one letter from uppercase to lowercase or
vice versa press ~.
Control the cursor with . Delete charac-
ters with
Letters are always inserted to the left of the cursor.
Inserting a blank 6before a name takes that name to
the top of the directory (for example “6Karla”).
1. B l a n k ( 6)3. Letters (alphabetical)
2. Digits (0-9) 4. Other characters
14
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Displaying, changing or deleting an entry
'/&Open the directory/network
access list.
'Select the entry you want.
9LHZ View all the information for the
entry.
&KDQJH Open the input field and make
the necessary changes.
)Change the number if necessary.
)Go to the name field and change
the name.
For notes on entering letters and
characters s. page 13.
For the directory enter an anni-
versary if necessary s. page 16.
AOpen the menu.
Save Entry
Confirm the changes.
or
'/&Open the directory/network
access list.
Select the relevant entry.
AOpen the menu.
Delete Entry
You will hear a confirmation tone.
The entry has been deleted.
Copying an entry to another handset
You can copy an entry to another Comfort handset.
'/&Open the directory/network
access list.
'Select the required entry.
AOpen the menu.
'
Delete Entry
Select the menu item and
confirm.
'Select the internal user (receiving
handset) and confirm.
15
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Copying a further entry:
<(6 Press.
'Select the required number.
&RS\ Initiate the copy process.
Copying the directory/network access list
You can copy the entire directory/network access list
to another Comfort handset.
See “Copying an entry to another handset”.
Deleting the directory/network access list
'/&Open the directory/network
access list.
Select the required entry.
AOpen the menu.
'
Delete List
Select the menu item and
confirm.
<(6 Confirm delete all entries.
Transmission is interrupted:
●if the memory of the receiving handset is full (the
last entry is displayed on the sending handset).
●if you receive a call.
Copying of an entry is terminated.
16
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Entering anniversaries (birthdays and so on)
You can store the date and time of anniversaries so
you can be reminded of them.
'Open the directory.
'9LHZ Select and display the entry.
&KDQJH Open the input field.
'Move the cursor into the birth-
day/anniversary field.
&KDQJH Confirm.
)Enter or change the date (day/
month).
')Scroll forward one line and enter
the time.
'Scroll forward one line.
Choose the indicator for the
alarm.
Store entries.
Use the display key 'HOHWH to delete the anniversary
alarm.
17
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Settings
Setting the alarm clock
You can use your handset as an alarm clock.
Activating the alarm clock
If activated, the alarm clock (Iicon) on your handset
will ring every day at the time entered.
With the handset idle:
AOpen the menu.
'
Calendar/Clock
Select the menu item and
confirm.
'
Alarm Clock
Select the menu item and
confirm.
The current setting is displayed.
Select
.
'Scroll forward one line.
[=[[ Enter the hours/minutes.
The example here is 06.00.
'Scroll forward one line.
Choose the ringer melody for the
alarm call.
6DYH Save the settings.
Deactivating the alarm clock
The alarm clock is set but you do not want it to ring.
AOpen the menu.
'
Calendar/Clock
Select the menu item and
confirm.
'
Alarm Clock
Select the menu item and
confirm.
Select .
On
An alarm call will not be made if room monitoring (ba-
byphone) is activated or during automatic redialling.
Off
18
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Turning off the alarm call
An alarm call is signalled like an incoming call. Press
any key to turn it off.
Setting an appointment
Your handset is able to remind you of one appoint-
ment. If you have set an appointment, this is indicated
by the Iicon in the display.
With the handset idle.
AOpen the menu.
'
Calendar/Clock
Select the menu item and
confirm.
Set Appoints.
Select the menu item and
confirm.
Select to activate the
appointment alarm.
'Scroll forward one line.
9[[< Enter the day/month.
The example here is 20th May.
'Scroll forward one line.
[D[ Enter the hours/minutes.
The example here is: 9.30.
'Scroll forward one line.
Choosing the ringer melody for
the appointment alarm.
6DYH Save the settings.
Turning off the appointment alarm
An appointment alarm is signalled in the same way as
an incoming call; press any key to turn it off.
On
An appointment alarm will only ring when the handset
is idle. An appointment alarm is not made when room
monitoring is activated or during automatic redial.
19
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Missed appointments and anniversaries
An appointment and anniversaries that have been sig-
nalled on the handset but not been accepted are
saved in a list.
If you want to view your appointment again, proceed
as follows:
AOpen the menu.
'
Calendar/Clock
Select the menu item and
confirm.
'
Missed Dates
Select the menu item and
confirm.
Select a missed appointment I
or anniversary4 Information on
this entry is displayed.
Use the display key 'HOHWH
to delete the appointment/
anniversary.
Handset and loudspeaker volume
You can set the handset volume to one of three levels,
and the loudspeaker for handsfree talking to one of
five levels – even during a call.
AOpen the menu.
'
Sound Settings
Select the submenu.
Handset Volume You will hear the current handset
volume.
Set the required handsfree talk-
ing volume.
'Scroll forward one line.
6DYHSelect the required level for the
handset volume and confirm.
A new missed appointment/anniversary is indicated
by $SSW. Press the right display key to display the list
Events list. Then select .
Missed Appoint. I
20
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Setting the ringer volume/melody
You can choose from five ringer volumes, “crescen-
do” ring (increasing volume), ringer off and any of
ten ringer melodies:
AOpen the menu.
'
Sound Settings
Select the menu item and
confirm.
'
Ringer Settings
You will hear the current
ringer volume and its level will
be displayed.
Select the ringer volume.
'Scroll forward one line.
6DYHSelect the required ringer mel-
ody (1–10) and confirm.
Time control for ringer volume
You can set a different ringer volume for a particular
time of day.
AOpen the menu.
'
Sound Settings
Select the menu item and
confirm.
'
Ringer Settings
You will hear the current ringer
volume and its level will be dis-
played.
7LPH& Press.
Activate/deactivate time control.
')Enter the period for the different
ringer
e. g.
[[
<[[ from 11:00 to 15:00.
'Scroll forward one line and select
the ringer volume
6DYH(QWU\ Save the settings.
6DYH
or Press.
21
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Activating/deactivating warning and
signal tones
●Key beeps: Every keystroke is confirmed.
●Confirmation beeps: Confirmation beep (a rising
tone sequence) when you make entries/settings
and when you replace the handset in the base sta-
tion.
●Battery low beep: The battery must be recharged.
AOpen the menu.
'
Sound Settings
Select the menu item and
confirm.
'
Advisory Tones
Select the menu item and
confirm.
'Select the required function.
, or select
(battery low beep in the call).
6DYH Save the settings.
Auto talk feature on/off
When this function is activated you can remove the
handset from the charging unit without pressing the
! key to accept a call (factory setting).
AOpen the menu.
'
H/Set Settings
Select the menu item and
confirm.
-
Auto Answer
Activate/deactivate with
('= function on).
On Off In Call
22
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Resetting to the factory defaults
The directory, the network access list and the caller
list are not deleted when you reset the handset. Reg-
istration at the base station is not affected.
AOpen the menu.
'
H/Set Settings
Select the menu item and
confirm.
'
Reset Handset
Select the menu item and
confirm.
<(6 Confirm.
Room monitoring (babyphone)
You can use your handset as a baby monitor.
The handset should be placed at least 1 to 2 meters
away from your baby. If a certain noise level is reached
(for example if your baby is crying) the handset will auto-
matically dial the number you stored (internal or ex-
ternal). When the room monitor is active, incoming calls
are merely displayed.
Function Factory setting
Handset volume 1
Ringer volume (“ring tone”,) 5
Ringer melody 1
Auto talk On
Battery low beep On
Handsfree volume 3
Room monitor level high
Time control off
Display language local
Redialling list deleted
23
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Setting the room monitor
AOpen the menu.
'
Family/Fun
Select the menu item and
confirm.
'
Room Monitor.
Select the menu item and
confirm.
Select or .
'Scroll forward one line.
&KDQJHOpen the entry field for the tele-
phone number.
Delete an existing external num-
ber with .
Delete an existing internal num-
ber with <(6 (you will be asked
to confirm).
)Open the list of internal users
and enter the internal number.
6DYH Save the number.
or
'Open the directory.
Select an external user.
AOpen the menu.
Save Entry
Confirm the setting.
Go down one line.
Set sensitivity to “high” or “low”.
6DYH Save the setting.
Room monitoring can be deactivated with the display
key .
On Off
You can deactivate the room monitor from an exter-
nal number (from your mobile phone for example).
Answer a call made from the room monitor.
Deactivate with DB.
The room monitor is now deactivated. The room mon-
itor will no longer call.
Off
24
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Walkie-talkie mode
This function enables handsets (Gigaset 4000 Com-
fort only) to communicate free of charge outside the
range of the base station. In walkie-talkie mode, hand-
sets are not available for incoming calls.
Activating walkie-talkie mode on the handset
AOpen the menu.
'
Family/Fun
Select the function.
'
Walkie-Talkie
Activate Walkie-Talkie mode.
Walkie-talkie mode can be deactivated with the
display key .
Using walkie-talkie mode
Two handsets are in walkie-talkie mode:
Calling handset:
&DOO Press.
Called handset:
The call is indicated by a message on the display.
6LOHQWPress.
!Press.
The two handsets are connected
to one another.
Press. The call is ended.
Requirements:
The handsets must have the same base settings (e.g.
best base station) or they must not be registered at
any base station. (Walkie-talkie mode reduces the
handset's talk time considerably).
Off
25
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Appendix
Operating on base stations in the
Gigaset family
Gigaset 1000/2000/3000
The following functions on your 4000 Comfort hand-
set are not supported by base stations in this Gigaset
family:
Setting the time (the time is not transferred after the
handset has been switched off)
●Changing the display language
●Room monitoring (cannot be switched off
externally)
●SMS transfer (SMS-compatible base stations only)
Gigaset 4010/4015 Classic
The following functions on your 4000 Comfort hand-
set are not supported by the above-mentioned base
stations:
●Changing the display language
●SMS transfer
●Setting authorisation stages
26
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Looking after your phone
Wipe the base station and handset with a damp cloth
or an antistatic wipe. Never use a dry cloth as this can
cause static discharge.
Recommended batteries:
Always replace both batteries at the same time and
only use batteries of the same type/manufacturer.
Operating times/charging time of the handset:
The charge capacity of the battery reduces after a
number of years. This is quite normal.
Range
The handset will operate away from the base station
up to about 300 m outdoors and up to 50 m indoors.
Nickel cadmium (NiCd) Nickel metal hydride (NiMH)
Sanyo N-3U (700 mAh) Saft VHAAH 1300 (1300 mAh)
Mobile Power 700
(700 mAh)
YDT 1200 (1200 mAh)
Panasonic P-60AA DT (600
mAh)
Panasonic HHR-110 AA
(1100 mAh)
Emmerich 700 (700 mAh) GP GP130 AA HC (1300 mAh)
Sanyo HR-3U (1600 mAh)
Emmerich 1300 (1300 mAh)
Capacity
(mAh)
Standby time
(hours)
Ta l k t i m e
(hours)
Charging
time (hours)
700 up to 150 more than 10 about 5.5
1200 up to 250 more than 17 about 9
1600 up to 350 more than 23 about 12
27
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm 12.04.01
Guarantee
If the telephone fails during the guarantee period be-
cause of poor workmanship or faulty materials Sie-
mens AG will repair or replace it.
The guarantee period for Europe is at least 24 months
(12 months up to 31.12.2001).
The guarantee does not cover damage caused by im-
proper use, wear and tear or unauthorised repairs. The
guarantee does not cover consumables or defects
that have only a negligible effect on the value or oper-
ation of the telephone.
For information on service telephone numbers see
back cover
Approval
The 4000 Comfort handset is approved for use
throughout the EU.