Siemens Schweiz 11M-PC-CARD PCMCIA card for laptop computer User Manual LLM

Siemens Schweiz PCMCIA card for laptop computer LLM

Page from manual showing warning

Download: Siemens Schweiz 11M-PC-CARD PCMCIA card for laptop computer User Manual         LLM
Mirror Download [FCC.gov]Siemens Schweiz 11M-PC-CARD PCMCIA card for laptop computer User Manual         LLM
Document ID119206
Application IDpyadWneZFS7SIxKUFeq7iw==
Document DescriptionPage from manual showing warning
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.87kB (23327 bits)
Date Submitted2000-09-28 00:00:00
Date Available2000-11-06 00:00:00
Creation Date2000-05-18 15:08:54
Producing SoftwareAcrobat PDFWriter 4.0 for Windows
Document Lastmod2000-09-28 18:12:47
Document Title穨LLM
Document Creator穨Microsoft Word - LLM

Chapter 3 Adapter Installation and Configuration – Windows ® 98
3-1 SYSTEM REQUIREMENTS
In order to install and use the 11M PCMCIA card your PC system must meet the
following requirements:
§ A PCMCIA Type II or Type III slot
§ PCMCIA revision 2.10 compliant card and socket services
§ Windows® 98 (with the Windows ® CD, for use during installation)
§ 500 Kbytes free disk space for utility and driver installation
3-2 INSERTING THE ADAPTER
To insert the 11M Network Adapter into a notebook computer, do the following:
1. Locate an available Type II or Type III PCMCIA slot.
2. With the PCMCIA adapter’s 68-pin connector facing the PCMCIA
slot and the “llM PCMCIA” label facing up slide the
PCMCIA adapter completely into the PCMCIA slot.
Fig. 5 Insert the WL11000 into Notebook
After properly inserting the Network Adapter into your notebook, continue with the
llM driver and PRISM Configuration Utility installation.
NOTE: The PCMCIA slot allows “hot swap” of PCMCIA adapter. You may insert or remove the
llM / PCMCIA adapter from the slot anytime, even when the power of your computer is on.
NOTE: Windows® 98 requires that the Network card and socket services must be compliant with
the PCMCIA revision 2.10 specification. Please check the documentation of the PCMCIA driver
before installing the llMPCMCIA adapter.
NOTE; To comply with FCC RF exposure requirements, this device should be operated in
configurations with a separation distance of 20 cm or more between the antenna
and persons. The antenna should not be operated next to a person’s body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : .穨.Microsoft Word - LLM
Create Date                     : 2000:05:18 15:08:54
Title                           : .穨.LLM
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2000:09:28 18:12:47
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O9R11M-PC-CARD

Navigation menu