Siemens MOBYF-XXX80 Tag Reader w/Serial Port User Manual Manual Basic Requirements
Siemens AG Tag Reader w/Serial Port Manual Basic Requirements
Siemens >
Contents
Manual Basic Requirements
3-2 MOBY F Configuration, Installation and Service Manual
(4) J31069-D0113-U001-A0-7618
3.1 Basic Requirements
!Warning
Do not make changes on the devices.
Violation will invalidate interference emission certification (BZT, FCC), CE,
and the manufacturer’s warranty.
Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
SReorient or relocate the receiving antenna.
SIncrease the separation between the equipment and receiver.
SConnect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
SConsult the dealer or an experienced radio/TV technician for help.
To choose the correct MOBY F components, apply the following criteria to
your particular application:
STransmission distance (i.e., read/write distance)
SThe amount of data to be transferred
SMetal-free spaces for MDS and SLG (antenna)
SStatic of dynamic transmission of the data
SSpeed for dynamic transmission
STolerances of the tracking
SEnvironmental conditions (e.g., moisture, temperature, chemical effects,
and so on)
SMaximum write frequency per MDS
Configuration and Mounting Guidelines