Siemens RF350R Inductive Tag Reader User Manual

Siemens AG Inductive Tag Reader RFID Systeme SIMATIC RF300

a href="https://usermanual.wiki/Siemens" itemprop="url"> Siemens >

Contents

Manual Part 2

 RF300 system planning  4.6 EMC Directives SIMATIC RF300 System Manual, Release 04/2006, J31069 D0166-U001-A2-7618  4-51 Prevention of interference by optimum configuration Good interference suppression can be achieved by installing SIMATIC PLCs on conducting mounting plates (unpainted). When setting up the control cabinet, interference can be prevented easily by observing certain guidelines. Power components (transformers, drive units, load power supply units) should be arranged separately from the control components (relay control unit, SIMATIC S7). As a rule: • The effect of the interference decreases as the distance between the interference source and interference sink increases. • The interference can be further decreased by installing grounded shielding plates. • The load connections and power cables should be installed separately from the signal cables with a minimum clearance of 10 cm. 3RZHUVXSSO\&&(8'ULYH6KLHOGSODWH Figure 4-24  Prevention of interference by optimum configuration
Download:
Mirror Download [FCC.gov]
Document ID674262
Application IDqQ3WnwrGlp5x65Xxd5OrFA==
Document DescriptionManual Part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize256.52kB (3206526 bits)
Date Submitted2006-06-28 00:00:00
Date Available2006-06-28 00:00:00
Creation Date2006-05-16 07:28:20
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2006-06-14 09:13:44
Document TitleRFID-Systeme SIMATIC RF300
Document CreatorAcrobat PDFMaker 6.0 für Word
Document Author: A&D SE EM MS
FCC ID Filing: NXW-RF350R

Navigation menu