Siemens Outboard Motor S120 Users Manual

2015-02-05

• SINAMICS S120 Drive Technology 1FW6 built-in torque motors
• Legal information
• Preface
• Table of contents
• 1 General safety guidelines
  • 1.1 Observing and complying with safety guidelines
  • 1.2 Handling direct drives and components
  • 1.3 Use for the intended purpose
  • 1.4 Danger from strong magnetic fields
  • 1.5 Electrical shock hazard!
  • 1.6 Attaching warning signs
  • 1.7 Pictograms supplied for 1FW6
• 2 Description of the motor
  • 2.1 Properties
    • 2.1.1 Overview
    • 2.1.2 Benefits
    • 2.1.3 Applications
  • 2.2 Technical features
  • 2.3 Selection and ordering data
  • 2.4 Order designation
    • 2.4.1 Structure of the order designations
    • 2.4.2 Standard 1FW6 built-in torque motor
    • 2.4.3 Stator as individual component
    • 2.4.4 Rotor as individual component
    • 2.4.5 Round sealing ring (O ring)
    • 2.4.6 Cooling connection adapter
    • 2.4.7 Plug connector
    • 2.4.8 Ordering notes
    • 2.4.9 Ordering examples
  • 2.5 Motor rating plate
• 3 Motor components of the built-in motor and options
  • 3.1 Overview of the motor construction
  • 3.2 Thermal motor protection
    • 3.2.1 Description of the temperature sensors
    • 3.2.2 Evaluation of the temperature sensors for motor protection
  • 3.3 Cooling
    • 3.3.1 Cooling circuits
    • 3.3.2 Coolant
• 4 Coupled motors
  • 4.1 Parallel operation of several motors
    • 4.1.1 Power connection for parallel operation
    • 4.1.2 Janus arrangement
• 5 Configuring the motor
  • 5.1 Procedure
    • 5.1.1 General mechanical conditions
    • 5.1.2 Specification of the duty cycle
    • 5.1.3 Torque-time diagram
    • 5.1.4 Selecting the motors
    • 5.1.5 Uneven current load
    • 5.1.6 Motor torque-speed diagram
    • 5.1.7 Torque-speed requirements
    • 5.1.8 More than one torque motor on one axes
    • 5.1.9 Checking the moments of inertia
    • 5.1.10 Selecting the drive system components for the power connection
    • 5.1.11 Calculating the required infeed power
  • 5.2 Example(s)
  • 5.3 Short-time duty S2 and intermittent duty S3
• 6 Motor assembly
  • 6.1 Motor assembly
    • 6.1.1 Procedure for installing the motor
    • 6.1.2 Cooler connection
    • 6.1.3 Information on routing cables
    • 6.1.4 Checking the work carried out
    • 6.1.5 Installation examples
  • 6.2 Protecting the motor components
• 7 System integration
  • 7.1 System requirements
  • 7.2 Encoders
  • 7.3 Bearings
  • 7.4 Braking concepts
• 8 Interfaces
  • 8.1 Overview
  • 8.2 Electrical connections
    • 8.2.1 Power connection
    • 8.2.2 Signal connection
    • 8.2.3 Shielding, grounding, and equipotential bonding
    • 8.2.4 Requirements for the motor supply cables
  • 8.3 Cooler connection
• 9 Commissioning
  • 9.1 Safety guidelines for commissioning
  • 9.2 Procedure
• 10 Operation
  • 10.1 Safety guidelines for operation
  • 10.2 Dealing with faults
• 11 Maintenance and repairs
  • 11.1 Safety information for maintenance and repairs
  • 11.2 Safety guidelines for high-voltage test
  • 11.3 Maintenance
  • 11.4 Test and replacement intervals of the cooling medium
• 12 Storage and transport
  • 12.1 Packaging, storage, and transport guidelines
  • 12.2 Safety note regarding lifting devices
• 13 Environmental compatibility
  • 13.1 Environmental compatibility during production
  • 13.2 Disposal
    • 13.2.1 Guidelines for disposal
    • 13.2.2 Disposing of 1FW6 rotors
    • 13.2.3 Disposal of packaging
• 14 Technical data and characteristics
  • 14.1 Explanations of the formula abbreviations
  • 14.2 Data sheets and diagrams
    • 14.2.1 1FW6090-xxxxx-xxxx
    • 14.2.2 1FW6130-xxxxx-xxxx
    • 14.2.3 1FW6150-xxxxx-xxxx
    • 14.2.4 1FW6160-xxxxx-xxxx
    • 14.2.5 1FW6190-xxxxx-xxxx
    • 14.2.6 1FW6230-xxxxx-xxxx
    • 14.2.7 1FW6290-xxxxx-xxxx
• 15 Installation drawings/Dimension drawings
  • 15.1 Installation situation for motors with a cooling jacket
  • 15.2 Explanation of installation drawings
  • 15.3 Installation drawings/Dimension drawings
• A Appendix
  • A.1 Recommended manufacturers
    • A.1.1 Supply sources for connection components and accessories for heat-exchanger units
    • A.1.2 Supply sources for cooling systems
    • A.1.3 Supply sources for anti-corrosion agents
    • A.1.4 Supply sources for braking elements
  • A.2 Fax form for suggestions/corrections (copy template)
  • A.3 List of abbreviations
• Index