Siemens S223 Users Manual SURPASS HiD 6615 S323 R1.5 User

2015-02-05

• 1 Introduction
  • 1.1 Audience
  • 1.2 Document Structure
  • 1.3 Document Convention
  • 1.4 Document Notation
  • 1.5 CE Declaration of Conformity
  • 1.6 GPL/LGPL Warranty and Liability Exclusion
• 2 System Overview
  • 2.1 System Features
• 3 Command Line Interface (CLI)
  • 3.1 Command Mode
    • 3.1.1 Privileged EXEC View Mode
    • 3.1.2 Privileged EXEC Enable Mode
    • 3.1.3 Global Configuration Mode
    • 3.1.4 Bridge Configuration Mode
    • 3.1.5 Rule Configuration Mode
    • 3.1.6 DHCP Configuration Mode
    • 3.1.7 DHCP Option 82 Configuration Mode
    • 3.1.8 Interface Configuration Mode
    • 3.1.9 RMON Configuration Mode
    • 3.1.10 Router Configuration Mode
    • 3.1.11 VRRP Configuration Mode
    • 3.1.12 Route-Map Configuration Mode
  • 3.2 Useful Tips
    • 3.2.1 Listing Available Commands
    • 3.2.2 Calling Command History
    • 3.2.3 Using Abbreviation
    • 3.2.4 Using Command of Privileged EXEC Enable Mode
    • 3.2.5 Exit Current Command Mode
• 4 System Connection and IP Address
  • 4.1 System Connection
    • 4.1.1 System Login
    • 4.1.2 Password for Privileged EXEC Mode
    • 4.1.3 Changing Login Password
    • 4.1.4 Management for System Account
      • 4.1.4.1 Creating System Account
      • 4.1.4.2 Configuring Security Level
    • 4.1.5 Limiting Number of User
    • 4.1.6 Telnet Access
    • 4.1.7 Auto Log-out
    • 4.1.8 System Rebooting
      • 4.1.8.1 Manual System Rebooting
      • 4.1.8.2 Auto System Rebooting
  • 4.2 System Authentication
    • 4.2.1 Authentication Method
    • 4.2.2 Authentication Interface
    • 4.2.3 Primary Authentication Method
    • 4.2.4 RADIUS Server
      • 4.2.4.1 RADIUS Server for System Authentication
      • 4.2.4.2 RADIUS Server Priority
      • 4.2.4.3 Timeout of Authentication Request
      • 4.2.4.4 Frequency of Retransmit
    • 4.2.5 TACACS Server
      • 4.2.5.1 TACACS Server for System Authentication
      • 4.2.5.2 TACACS Server Priority
      • 4.2.5.3 Timeout of Authentication Request
      • 4.2.5.4 Additional TACACS+ Configuration
    • 4.2.6 Accounting Mode
    • 4.2.7 Displaying System Authentication
    • 4.2.8 Sample Configuration
  • 4.3 Assigning IP Address
    • 4.3.1 Enabling Interface
    • 4.3.2 Disabling Interface
    • 4.3.3 Assigning IP Address to Network Interface
    • 4.3.4 Static Route and Default Gateway
    • 4.3.5 Displaying Forwarding Information Base(FIB) Table
    • 4.3.6 Forwarding Information Base(FIB) Retain
    • 4.3.7 Displaying Interface
    • 4.3.8 Sample Configuration
  • 4.4 SSH (Secure Shell)
    • 4.4.1 SSH Server
      • 4.4.1.1 Enabling SSH Server
      • 4.4.1.2 Displaying On-line SSH Client
      • 4.4.1.3 Disconnecting SSH Client
      • 4.4.1.4 Displaying Connection History of SSH Client
      • 4.4.1.5 Assigning Specific Authentication Key
    • 4.4.2 SSH Client
      • 4.4.2.1 Login to SSH Server
      • 4.4.2.2 File Copy
      • 4.4.2.3 Configuring Authentication Key
  • 4.5 802.1x Authentication
    • 4.5.1 802.1x Authentication
      • 4.5.1.1 Enabling 802.1x
      • 4.5.1.2 Configuring RADIUS Server
      • 4.5.1.3 Configuring Authentication Mode
      • 4.5.1.4 Authentication Port
      • 4.5.1.5 Force Authorization
      • 4.5.1.6 Configuring Interval for Retransmitting Request/Identity Packet
      • 4.5.1.7 Configuring Number of Request to RADIUS Server
      • 4.5.1.8 Configuring Interval of Request to RADIUS Server
    • 4.5.2 802.1x Re-Authentication
      • 4.5.2.1 Enabling 802.1x Re-Authentication
      • 4.5.2.2 Configuring the Interval of Re-Authentication
      • 4.5.2.3 Configuring the Interval of Requesting Re-authentication
      • 4.5.2.4 802.1x Re-authentication
    • 4.5.3 Initializing Authentication Status
    • 4.5.4 Applying Default Value
    • 4.5.5 Displaying 802.1x Configuration
    • 4.5.6 802.1x User Authentication Statistic
    • 4.5.7 Sample Configuration
• 5 Port Configuration
  • 5.1 Port Basic
    • 5.1.1 Selecting Port Type
  • 5.2 Ethernet Port Configuration
    • 5.2.1 Enabling Ethernet Port
    • 5.2.2 Auto-negotiation
    • 5.2.3 Transmit Rate
    • 5.2.4 Duplex Mode
    • 5.2.5 Flow Control
    • 5.2.6 Port Description
    • 5.2.7 Traffic Statistics
      • 5.2.7.1 The Packets Statistics
      • 5.2.7.2 The CPU statistics
      • 5.2.7.3 The Protocol statistics
    • 5.2.8 Port Status
    • 5.2.9 Initializing Port Statistics
  • 5.3 Port Mirroring
• 6 System Environment
  • 6.1 Environment Configuration
    • 6.1.1 Host Name
    • 6.1.2 Time and Date
    • 6.1.3 Time Zone
    • 6.1.4 Network Time Protocol
    • 6.1.5 NTP (Network Time Protocol)
    • 6.1.6 Simple Network Time Protocol (SNTP)
    • 6.1.7 Terminal Configuration
    • 6.1.8 Login Banner
    • 6.1.9 DNS Server
    • 6.1.10 Fan Operation
    • 6.1.11 Disabling Daemon Operation
    • 6.1.12 System Threshold
      • 6.1.12.1 CPU Load
      • 6.1.12.2 Port Traffic
      • 6.1.12.3 Fan Operation
      • 6.1.12.4 System Temperature
      • 6.1.12.5 System Memory
    • 6.1.13 Enabling FTP Server
    • 6.1.14 Assigning IP Address of FTP Client
  • 6.2 Configuration Management
    • 6.2.1 Displaying System Configuration
    • 6.2.2 Saving System Configuration
    • 6.2.3 Auto-Saving
    • 6.2.4 System Configuration File
    • 6.2.5 Restoring Default Configuration
  • 6.3 System Management
    • 6.3.1 Network Connection
    • 6.3.2 IP ICMP Source-Routing
    • 6.3.3 Tracing Packet Route
    • 6.3.4 Displaying User Connecting to System
    • 6.3.5 MAC Table
    • 6.3.6 Configuring Ageing time
    • 6.3.7 Running Time of System
    • 6.3.8 System Information
    • 6.3.9 System Memory Information
    • 6.3.10 CPU packet limit
    • 6.3.11 Average of CPU Load
    • 6.3.12 Running Process
    • 6.3.13 Displaying System Image
    • 6.3.14 Displaying Installed OS
    • 6.3.15 Default OS
    • 6.3.16 Switch Status
    • 6.3.17 Tech Support
• 7 Network Management
  • 7.1 Simple Network Management Protocol (SNMP)
    • 7.1.1 SNMP Community
    • 7.1.2 Information of SNMP Agent
    • 7.1.3 SNMP Com2sec
    • 7.1.4 SNMP Group
    • 7.1.5 SNMP View Record
    • 7.1.6 Permission to Access SNMP View Record
    • 7.1.7 SNMP Version 3 User
    • 7.1.8 SNMP Trap
      • 7.1.8.1 SNMP Trap Host
      • 7.1.8.2 SNMP Trap Mode
      • 7.1.8.3 Enabling SNMP Trap
      • 7.1.8.4 Disabling SNMP Trap
      • 7.1.8.5 Displaying SNMP Trap
    • 7.1.9 SNMP Alarm
      • 7.1.9.1 Enabling Alarm Notification
      • 7.1.9.2 Default Alarm Severity
      • 7.1.9.3 Alarm Severity Criterion
      • 7.1.9.4 Generic Alarm Severity
      • 7.1.9.5 ADVA Alarm Severity
      • 7.1.9.6 ERP Alarm Severity
      • 7.1.9.7 STP Guard Alarm Severity
    • 7.1.10 Displaying SNMP Configuration
    • 7.1.11 Disabling SNMP
  • 7.2 Operation, Administration and Maintenance (OAM)
    • 7.2.1 OAM Loopback
    • 7.2.2 Local OAM Mode
    • 7.2.3 OAM Unidirection
    • 7.2.4 Remote OAM
    • 7.2.5 Displaying OAM Configuration
  • 7.3 Link Layer Discovery Protocol (LLDP)
    • 7.3.1 LLDP Operation
    • 7.3.2 LLDP Operation Type
    • 7.3.3 Basic TLV
    • 7.3.4 LLDP Message
    • 7.3.5 Interval and Delay Time
    • 7.3.6 Displaying LLDP Configuration
  • 7.4 Remote Monitoring (RMON)
    • 7.4.1 RMON History
      • 7.4.1.1 Source Port of Statistical Data
      • 7.4.1.2 Subject of RMON History
      • 7.4.1.3 Number of Sample Data
      • 7.4.1.4 Interval of Sample Inquiry
      • 7.4.1.5 Activating RMON History
      • 7.4.1.6 Deleting Configuration of RMON History
      • 7.4.1.7 Displaying RMON History
    • 7.4.2 RMON Alarm
      • 7.4.2.1 Subject of RMON Alarm
      • 7.4.2.2 Object of Sample Inquiry
      • 7.4.2.3 Absolute Comparison and Delta Comparison
      • 7.4.2.4 Upper Bound of Threshold
      • 7.4.2.5 Lower Bound of Threshold
      • 7.4.2.6 Configuring Standard of the First Alarm
      • 7.4.2.7 Interval of Sample Inquiry
      • 7.4.2.8 Activating RMON Alarm
      • 7.4.2.9 Deleting Configuration of RMON Alarm
      • 7.4.2.10 Displaying RMON Alarm
    • 7.4.3 RMON Event
      • 7.4.3.1 Event Community
      • 7.4.3.2 Event Description
      • 7.4.3.3 Subject of RMON Event
      • 7.4.3.4 Event Type
      • 7.4.3.5 Activating RMON Event
      • 7.4.3.6 Deleting Configuration of RMON Event
      • 7.4.3.7 Displaying RMON Event
  • 7.5 Syslog
    • 7.5.1 Syslog Output Level
    • 7.5.2 Facility Code
    • 7.5.3 Syslog Bind Address
    • 7.5.4 Debug Message for Remote Terminal
    • 7.5.5 Disabling Syslog
    • 7.5.6 Displaying Syslog Message
    • 7.5.7 Displaying Syslog Configuration
  • 7.6 Rule and QoS
    • 7.6.1 How to Operate Rule and QoS
    • 7.6.2 Rule Configuration
      • 7.6.2.1 Rule Creation
      • 7.6.2.2 Rule Priority
      • 7.6.2.3 Packet Classification
      • 7.6.2.4 Rule Action
      • 7.6.2.5 Applying Rule
      • 7.6.2.6 Modifying and Deleting Rule
      • 7.6.2.7 Displaying Rule
    • 7.6.3 QoS
      • 7.6.3.1 Scheduling Algorithm
      • 7.6.3.2 Qos Weight
      • 7.6.3.3 802.1p Priory-to-queue Mapping
      • 7.6.3.4 Queue Parameter
      • 7.6.3.5 Displaying QoS
    • 7.6.4 Admin Access Rule
      • 7.6.4.1 Rule Creation
      • 7.6.4.2 Rule Priority
      • 7.6.4.3 Packet Classification
      • 7.6.4.4 Rule Action
      • 7.6.4.5 Applying Rule
      • 7.6.4.6 Modifying and Deleting Rule
      • 7.6.4.7 Displaying Rule
  • 7.7 NetBIOS Filtering
  • 7.8 Martian Filtering
  • 7.9 Max Host
    • 7.9.1 Max New Hosts
  • 7.10 Port Security
    • 7.10.1 Port Security on Port
    • 7.10.2 Port Security Aging
  • 7.11 MAC Table
  • 7.12 MAC Filtering
    • 7.12.1 Default Policy of MAC Filtering
    • 7.12.2 Adding Policy of MAC Filter
    • 7.12.3 Deleting MAC Filter Policy
    • 7.12.4 Listing of MAC Filter Policy
    • 7.12.5 Displaying MAC Filter Policy
  • 7.13 Address Resolution Protocol (ARP)
    • 7.13.1 ARP Table
      • 7.13.1.1 Registering ARP Table
      • 7.13.1.2 Displaying ARP Table
    • 7.13.2 ARP Alias
    • 7.13.3 ARP Inspection
    • 7.13.4 Gratuitous ARP
    • 7.13.5 Proxy-ARP
  • 7.14 ICMP Message Control
    • 7.14.1 Blocking Echo Reply Message
    • 7.14.2 Interval for Transmit ICMP Message
    • 7.14.3 Transmitting ICMP Redirect Message
    • 7.14.4 The policy of unreached messages
  • 7.15 IP TCP Flag Control
    • 7.15.1 RST Configuration
    • 7.15.2 SYN Configuration
  • 7.16 Packet Dump
    • 7.16.1 Verifying Packet Dump
      • 7.16.1.1 Packet Dump by Protocol
      • 7.16.1.2 Packet Dump with Option
    • 7.16.2 Debug Packet Dump
  • 7.17 Displaying the usage of the packet routing table
• 8 System Main Functions
  • 8.1 VLAN
    • 8.1.1 Port-Based VLAN
      • 8.1.1.1 Creating VLAN
      • 8.1.1.2 Specifying PVID
      • 8.1.1.3 Assigning Port to VLAN
      • 8.1.1.4 Deleting VLAN
      • 8.1.1.5 Displaying VLAN
    • 8.1.2 Protocol-Based VLAN
    • 8.1.3 MAC address-based VLAN
    • 8.1.4 Subnet-based VLAN
    • 8.1.5 Tagged VLAN
    • 8.1.6 VLAN Description
    • 8.1.7 Displaying VLAN Information
    • 8.1.8 QinQ
      • 8.1.8.1 Double Tagging Operation
      • 8.1.8.2 Double Tagging Configuration
      • 8.1.8.3 TPID Configuration
    • 8.1.9 Layer 2 Isolation
      • 8.1.9.1 Port Isolation
      • 8.1.9.2 Shared VLAN
    • 8.1.10 VLAN Translation
    • 8.1.11 Sample Configuration
  • 8.2 Link Aggregation
    • 8.2.1 Port Trunk
      • 8.2.1.1 Configuring Port Trunk
      • 8.2.1.2 Disabling Port Trunk
      • 8.2.1.3 Displaying Port Trunk Configuration
    • 8.2.2 Link Aggregation Control Protocol (LACP)
      • 8.2.2.1 Configuring LACP
      • 8.2.2.2 Packet Route
      • 8.2.2.3 Operating Mode of Member Port
      • 8.2.2.4 Identifying Member Ports within LACP
      • 8.2.2.5 BPDU Transmission Rate
      • 8.2.2.6 Key value of Member Port
      • 8.2.2.7 Priority of Member Port
      • 8.2.2.8 Priority of Switch
      • 8.2.2.9 Displaying LACP Configuration
  • 8.3 Spanning-Tree Protocol (STP)
    • 8.3.1 STP Operation
    • 8.3.2 RSTP Operation
    • 8.3.3 MSTP Operation
    • 8.3.4 Configuring STP/RSTP/MSTP/PVSTP/PVRSTP Mode (Required)
    • 8.3.5 Configuring STP/RSTP/MSTP
      • 8.3.5.1 Activating STP/RSTP/MSTP
      • 8.3.5.2 Root Switch
      • 8.3.5.3 Path-cost
      • 8.3.5.4 Port-priority
      • 8.3.5.5 MST Region
      • 8.3.5.6 MSTP Protocol
      • 8.3.5.7 Point-to-point MAC Parameters
      • 8.3.5.8 Edge Ports
      • 8.3.5.9 Displaying Configuration
    • 8.3.6 Configuring PVSTP/PVRSTP
      • 8.3.6.1 Activating PVSTP/PVRSTP
      • 8.3.6.2 Root Switch
      • 8.3.6.3 Path-cost
      • 8.3.6.4 Port-priority
    • 8.3.7 Root Guard
    • 8.3.8 Restarting Protocol Migration
    • 8.3.9 Bridge Protocol Data Unit Configuration
      • 8.3.9.1 Hello Time
      • 8.3.9.2 Forward Delay
      • 8.3.9.3 Max Age
      • 8.3.9.4 BPDU Hop
      • 8.3.9.5 BPDU Filter
      • 8.3.9.6 BPDU Guard
      • 8.3.9.7 Self Loop Detection
      • 8.3.9.8 Displaying BPDU Configuration
    • 8.3.10 Sample Configuration
  • 8.4 Virtual Router Redundancy Protocol (VRRP)
    • 8.4.1 Configuring VRRP
      • 8.4.1.1 Associated IP Address
      • 8.4.1.2 Access to Associated IP Address
      • 8.4.1.3 Master Router and Backup Router
      • 8.4.1.4 VRRP Track Function
      • 8.4.1.5 Authentication Password
      • 8.4.1.6 Preempt
      • 8.4.1.7 VRRP Statistics
  • 8.5 Rate Limit
    • 8.5.1 Configuring Rate Limit
    • 8.5.2 Sample Configuration
  • 8.6 Flood Guard
    • 8.6.1 Configuring Flood-Guard
    • 8.6.2 Sample Configuration
  • 8.7 Bandwidth
  • 8.8 Dynamic Host Configuration Protocol (DHCP)
    • 8.8.1 DHCP Server
      • 8.8.1.1 DHCP Pool Creation
      • 8.8.1.2 DHCP Subnet
      • 8.8.1.3 Range of IP Address
      • 8.8.1.4 Default Gateway
      • 8.8.1.5 IP Lease Time
      • 8.8.1.6 DNS Server
      • 8.8.1.7 Manual Binding
      • 8.8.1.8 Domain Name
      • 8.8.1.9 DHCP Server Option
      • 8.8.1.10 Static Mapping
      • 8.8.1.11 Recognition of DHCP Client
      • 8.8.1.12 IP Address Validation
      • 8.8.1.13 Authorized ARP
      • 8.8.1.14 Prohibition of 1:N IP Address Assignment
      • 8.8.1.15 Ignoring BOOTP Request
      • 8.8.1.16 DHCP Packet Statistics
      • 8.8.1.17 Displaying DHCP Pool Configuration
    • 8.8.2 DHCP Address Allocation with Option 82
      • 8.8.2.1 DHCP Class Capability
      • 8.8.2.2 DHCP Class Creation
      • 8.8.2.3 Relay Agent Information Pattern
      • 8.8.2.4 Associating DHCP Class
      • 8.8.2.5 Range of IP Address for DHCP Class
    • 8.8.3 DHCP Lease Database
      • 8.8.3.1 DHCP Database Agent
      • 8.8.3.2 Displaying DHCP Lease Status
      • 8.8.3.3 Deleting DHCP Lease Database
    • 8.8.4 DHCP Relay Agent
      • 8.8.4.1 Packet Forwarding Address
      • 8.8.4.2 Smart Relay Agent Forwarding
    • 8.8.5 DHCP Option 82
      • 8.8.5.1 Enabling DHCP Option 82
      • 8.8.5.2 Option 82 Sub-Option
      • 8.8.5.3 Option 82 Reforwarding Policy
      • 8.8.5.4 Option 82 Trust Policy
      • 8.8.5.5 Simplified DHCP Option 82
    • 8.8.6 DHCP Client
      • 8.8.6.1 Enabling DHCP Client
      • 8.8.6.2 DHCP Client ID
      • 8.8.6.3 DHCP Class ID
      • 8.8.6.4 Host Name
      • 8.8.6.5 IP Lease Time
      • 8.8.6.6 Requesting Option
      • 8.8.6.7 Forcing Release or Renewal of DHCP Lease
      • 8.8.6.8 Displaying DHCP Client Configuration
    • 8.8.7 DHCP Snooping
      • 8.8.7.1 Enabling DHCP Snooping
      • 8.8.7.2 DHCP Trust State
      • 8.8.7.3 DHCP Rate Limit
      • 8.8.7.4 DHCP Lease Limit
      • 8.8.7.5 Source MAC Address Verification
      • 8.8.7.6 DHCP Snooping Database Agent
      • 8.8.7.7 Displaying DHCP Snooping Configuration
    • 8.8.8 IP Source Guard
      • 8.8.8.1 Enabling IP Source Guard
      • 8.8.8.2 Static IP Source Binding
      • 8.8.8.3 Displaying IP Source Guard Configuration
    • 8.8.9 DHCP Filtering
      • 8.8.9.1 DHCP Packet Filtering
      • 8.8.9.2 DHCP Server Packet Filtering
    • 8.8.10 Debugging DHCP
  • 8.9 Ethernet Ring Protection (ERP)
    • 8.9.1 ERP Operation
    • 8.9.2 Loss of Test Packet (LOTP)
    • 8.9.3 Configuring ERP
      • 8.9.3.1 ERP Domain
      • 8.9.3.2 RM Node
      • 8.9.3.3 Port of ERP domain
      • 8.9.3.4 Protected VLAN
      • 8.9.3.5 Protected Activation
      • 8.9.3.6 Manual Switch to Secondary
      • 8.9.3.7 Wait-to-Restore Time
      • 8.9.3.8 Learning Disable Time
      • 8.9.3.9 Test Packet Interval
      • 8.9.3.10 Displaying ERP Configuration
  • 8.10 Stacking
    • 8.10.1 Switch Group
    • 8.10.2 Designating Master and Slave Switch
    • 8.10.3 Disabling Stacking
    • 8.10.4 Displaying Stacking Status
    • 8.10.5 Accessing to Slave Switch from Master Switch
    • 8.10.6 Sample Configuration
  • 8.11 Broadcast Storm Control
  • 8.12 Jumbo-frame Capacity
  • 8.13 Blocking Direct Broadcast
  • 8.14 Maximum Transmission Unit (MTU)
• 9 IP Multicast
  • 9.1 Multicast Routing Information Base
    • 9.1.1 Enabling Multicast Routing (Required)
    • 9.1.2 Limitation of MRIB Routing Entry
    • 9.1.3 Clearing MRIB Information
    • 9.1.4 Displaying MRIB Information
    • 9.1.5 Multicast Time-To-Live Threshold
    • 9.1.6 MRIB Debug
    • 9.1.7 Multicast Aging
  • 9.2 Internet Group Management Protocol (IGMP)
    • 9.2.1 IGMP Basic Configuration
      • 9.2.1.1 IGMP Version per Interface
      • 9.2.1.2 Removing IGMP Entry
      • 9.2.1.3 IGMP Debug
      • 9.2.1.4 IGMP Robustness Value
    • 9.2.2 IGMP Version 2
      • 9.2.2.1 IGMP Static Join Setting
      • 9.2.2.2 Maximum Number of Groups
      • 9.2.2.3 IGMP Query Configuration
      • 9.2.2.4 IGMP v2 Fast Leave
      • 9.2.2.5 Displaying the IGMP Configuration
    • 9.2.3 L2 MFIB
    • 9.2.4 IGMP Snooping Basic Configuration
      • 9.2.4.1 Enabling IGMP Snooping per VLAN
      • 9.2.4.2 Robustness Count for IGMP v2 Snooping
    • 9.2.5 IGMP v2 Snooping
      • 9.2.5.1 IGMP v2 Snooping Fast Leave
      • 9.2.5.2 IGMP v2 Snooping Querier
      • 9.2.5.3 IGMP v2 Snooping Last-Member-Interval
      • 9.2.5.4 IGMP v2 Snooping Report Method
      • 9.2.5.5 Mrouter Port
      • 9.2.5.6 Multicast TCN Flooding
    • 9.2.6 IGMP v3 Snooping
      • 9.2.6.1 IGMP Snooping Version
      • 9.2.6.2 Join Host Management
      • 9.2.6.3 Immediate Block
    • 9.2.7 Multicast VLAN Registration (MVR)
      • 9.2.7.1 Enabling MVR
      • 9.2.7.2 MVR Group Address
      • 9.2.7.3 MVR IP Address
      • 9.2.7.4 Send and Receive Port
      • 9.2.7.5 Displaying MVR Configuration
    • 9.2.8 IGMP Filtering and Throttling
      • 9.2.8.1 Creating IGMP Profile
      • 9.2.8.2 Policy of IGMP Profile
      • 9.2.8.3 Group Range of IGMP Profile
      • 9.2.8.4 Applying IGMP Profile to the Filter Port
      • 9.2.8.5 Max Number of IGMP Join Group
    • 9.2.9 Displaying IGMP Snooping Table
  • 9.3 PIM-SM (Protocol Independent Multicast-Sparse Mode)
    • 9.3.1 PIM Common Configuration
      • 9.3.1.1 PIM-SM and Passive Mode
      • 9.3.1.2 DR Priority
      • 9.3.1.3 Filters of Neighbor in PIM
      • 9.3.1.4 PIM Hello Query
      • 9.3.1.5 PIM Debug
    • 9.3.2 BSR and RP
    • 9.3.3 Bootstrap Router (BSR)
    • 9.3.4 RP Information
      • 9.3.4.1 Static RP for Certain Group
      • 9.3.4.2 Enabling Transmission of Candidate RP Message
      • 9.3.4.3 KAT (Keep Alive Time) of RP
      • 9.3.4.4 Ignoring RP Priority
    • 9.3.5 PIM-SM Registration
      • 9.3.5.1 Rate Limit of Register Message
      • 9.3.5.2 Registeration Suppression Time
      • 9.3.5.3 Filters for Register Message from RP
      • 9.3.5.4 Source Address of Register Message
      • 9.3.5.5 Reachability for PIM Register Process
    • 9.3.6 SPT Switchover
    • 9.3.7 PIM Join/Prune Interoperability
    • 9.3.8 Cisco Router Interoperability
      • 9.3.8.1 Checksum of Full PIM Register Message
      • 9.3.8.2 Candidate RP Message with Cisco BSR
      • 9.3.8.3 Excluding GenID Option
    • 9.3.9 PIM-SSM Group
    • 9.3.10 PIM Snooping
    • 9.3.11 Displaying PIM-SM Configuration
• 10 IP Routing Protocol
  • 10.1 Border Gateway Protocol (BGP)
    • 10.1.1 Basic Configuration
      • 10.1.1.1 Configuration Type of BGP
      • 10.1.1.2 Enabling BGP Routing
      • 10.1.1.3 Disabling BGP Routing
    • 10.1.2 Advanced Configuration
      • 10.1.2.1 Summary of Path
      • 10.1.2.2 Automatic Summarization of Path
      • 10.1.2.3 Multi-Exit Discriminator (MED)
      • 10.1.2.4 Choosing Best Path
      • 10.1.2.5 Graceful Restart
    • 10.1.3 IP Address Family
    • 10.1.4 BGP Neighbor
      • 10.1.4.1 Default Route
      • 10.1.4.2 Peer Group
      • 10.1.4.3 Route Map
      • 10.1.4.4 Force Shutdown
    • 10.1.5 BGP Session Reset
      • 10.1.5.1 Session Reset of All Peers
      • 10.1.5.2 Session Reset of Peers within Particular AS
      • 10.1.5.3 Session Reset of Specific Route
      • 10.1.5.4 Session Reset of External Peer
      • 10.1.5.5 Session Reset of Peer Group
    • 10.1.6 Displaying and Managing BGP
  • 10.2 Open Shortest Path First (OSPF)
    • 10.2.1 Enabling OSPF
    • 10.2.2 ABR Type Configuration
    • 10.2.3 Compatibility Support
    • 10.2.4 OSPF Interface
      • 10.2.4.1 Authentication Type
      • 10.2.4.2 Authentication Key
      • 10.2.4.3 Interface Cost
      • 10.2.4.4 Blocking Transmission of Route Information Database
      • 10.2.4.5 Routing Protocol Interval
      • 10.2.4.6 OSPF Maximum Transmission Unit (MTU)
      • 10.2.4.7 OSPF Priority
      • 10.2.4.8 OSPF Network Type
    • 10.2.5 Non-Broadcast Network
    • 10.2.6 OSPF Area
      • 10.2.6.1 Area Authentication
      • 10.2.6.2 Default Cost of Area
      • 10.2.6.3 Blocking the Transmission of Routing Information Between Area
      • 10.2.6.4 Not So Stubby Area (NSSA)
      • 10.2.6.5 Area Range
      • 10.2.6.6 Shortcut Area
      • 10.2.6.7 Stub Area
      • 10.2.6.8 Virtual Link
    • 10.2.7 Default Metric
    • 10.2.8 Graceful Restart Support
    • 10.2.9 Opaque-LSA Support
    • 10.2.10 Default Route
    • 10.2.11 Finding Period
    • 10.2.12 External Routes to OSPF Network
    • 10.2.13 OSPF Distance
    • 10.2.14 Host Route
    • 10.2.15 Passive Interface
    • 10.2.16 Blocking Routing Information
    • 10.2.17 Summary Routing Information
    • 10.2.18 OSPF Monitoring and Management
      • 10.2.18.1 Displaying OSPF Protocol Information
      • 10.2.18.2 Displaying Debugging Information
      • 10.2.18.3 Limiting Number of Database
      • 10.2.18.4 Maximum Process of LSA
  • 10.3 Routing Information Protocol (RIP)
    • 10.3.1 Enabling RIP
    • 10.3.2 RIP Neighbor Router
    • 10.3.3 RIP Version
    • 10.3.4 Creating available Static Route only for RIP
    • 10.3.5 Redistributing Routing Information
    • 10.3.6 Metrics for Redistributed Routes
    • 10.3.7 Administrative Distance
    • 10.3.8 Originating Default Information
    • 10.3.9 Routing Information Filtering
      • 10.3.9.1 Filtering Access List and Prefix List
      • 10.3.9.2 Disabling the transmission to Interface
      • 10.3.9.3 Offset List
    • 10.3.10 Maximum Number of RIP Routes
    • 10.3.11 RIP Network Timer
    • 10.3.12 Split Horizon
    • 10.3.13 Authentication Key
    • 10.3.14 Restarting RIP
    • 10.3.15 UDP Buffer Size of RIP
    • 10.3.16 Monitoring and Managing RIP
• 11 System Software Upgrade
  • 11.1 General Upgrade
  • 11.2 Boot Mode Upgrade
  • 11.3 FTP Upgrade
• 12 Abbreviations