Siemens Simatic 620 Users Manual Box PC

2015-02-05

• Title
• Preface
• Table of contents
• 1 Important Information
  • 1.1 Safety Instructions
  • 1.2 Certificates, Directives and Declarations
  • 1.3 Certification for the USA, Canada and Autralia
  • 1.4 Transport
• 2 Welcome to the SIMATIC Box PC 620
  • 2.1 Port Side View
  • 2.2 Drive Side View
  • 2.3 Bottom View
  • 2.4 Side View
  • 2.5 Ports
  • 2.6 Drives
  • 2.6.1 Disk Drive (Depending on the Device Configuration)
  • 2.6.2 LS 240 Drive (Depending on Device Configuration)
  • 2.6.3 Hard Disk Drive
  • 2.6.4 CD ROM or CD RW/DVD(Combo) Drive
  • 2.7 Backup Battery
• 3 Setting Up and Operating the SIMATIC Box PC 620
  • 3.1 Unpacking and Checking the Scope of Delivery
  • 3.2 Installing the SIMATIC Box PC 620
  • 3.3 Preparing for Operation
  • 3.4 Connecting Peripheral Devices
  • 3.5 Working with PC Cards
  • 3.6 Connecting the SIMATIC Box PC 620 to other SIMATIC S5
  • 3.7 Connecting the SIMATIC Box PC 620 to a SIMATIC S7 Network (PROFIBUS/MPI)
  • 3.8 Networking the SIMATIC Box PC 620 with Other Stations on PROFIBUS
  • 3.9 Ethernet (RJ45 Ethernet Interface)
  • 3.10 Connection under Windows
• 4 SIMATIC Box PC 620 Expansions
  • 4.1 Opening the Unit
  • 4.1.1 Prerequisites
  • 4.1.2 Opening the SIMATIC Box PC 620
  • 4.1.3 Components Visible After Opening the Unit
  • 4.1.4 The Motherboard
  • 4.2 Installing Memory Expansion Submodules
  • 4.3 Replacing the Backup Battery
  • 4.4 Installation of Expansion Cards
  • 4.4.1 Removal and Installation of the Device for Holding Down the modules
  • 4.4.2 Removal and Installation of an Expansion Card
  • 4.5 Removal and Installation of Drives
  • 4.5.1 Removal and Installation of the Hard Disk Drive
  • 4.5.2 Removal and Installation of a CD ROM Drive
  • 4.5.3 Removal and Installation of the Floppy Drive
  • 4.5.4 Removal and Installation of the LS 240 Drive
  • 4.6 Removal and Installation of the Power Supply Unit
  • 4.7 Removal and Installation of the Bus Board
  • 4.8 Removal and Installation of the Motherboard
  • 4.9 Removal and Installation of the Device Fan
  • 4.10 Processor Change
  • 4.11 Reset Button
• 5 Configuring the SIMATIC Box PC 620
  • 5.1 Changing the Device Configuration with BIOS SETUP
  • 5.1.1 The Main Menu
  • 5.1.2 The Advanced Menu
  • 5.1.3 The Security Menu
  • 5.1.4 The Power Menu
  • 5.1.5 The Boot Sequence Menu
  • 5.1.6 The Version Menu
  • 5.1.7 The Exit Menu
  • 5.1.8 Default Setup Settings
  • 5.2 Configuring the PC Card
• 6 Error Diagnosis
  • 6.1 Problems When Using Modules from Other Manufacturers
  • 6.2 The Monitor Remains Dark
  • 6.3 The Screen Display Does not Appear or Drifts
  • 6.4 No Mouse Pointer Appears on the Screen
  • 6.5 The Clock Time and/or the Date in Your PC Is Incorrect
  • 6.6 USB-Device does not function
  • 6.7 An Error Message Appears on the Screen
  • 6.8 Diagnostic Messages (Port 80)
• 7 Hardware Information
  • 7.1 Current Requirement of the Components (Maximum Values)
  • 7.2 Overview of the Components and Ports
  • 7.3 System Resources
  • 7.4 Monitoring functions
  • 7.4.5 Fan Monitoring
  • 7.5 Ports
  • 7.5.1 External Ports
  • 7.5.2 Assignment of the Front Ports on the Motherboard
  • 7.5.3 Assignment of the Internal Ports on the Motherboard
  • 7.6 Bus Board
  • 7.6.1 Design and Mode of Operation
  • 7.6.2 ISA Slot Pin Assignment
  • 7.6.3 PCI Slot Pin Assignment
  • 7.7 Power Supply with 85W power output (AC and DC)
  • 7.8 Power Supply with 105W power output (AC and DC)
  • 7.9 Connecting Cables
• 8 Reinstallation of the Software
  • 8.1 Restoring the Hard Disk
  • 8.1.1 Creating Partitions under Microsoft Windows 98
  • 8.1.2 Creating Partitions under Windows NT
  • 8.1.3 Creating Partitions under Windows 2000
  • 8.2 Installing the Windows Operating System
  • 8.2.1 Installing the Recovery CD for Microsoft Windows 98
  • 8.2.2 Installing the Recovery CD for Microsoft Windows NT
  • 8.2.3 Installing the Recovery CD for Microsoft Windows 2000
  • 8.3 Installing Drivers and Software
  • 8.4 Installing and Operating the Burner Software
• A Guidelines for handling electrostatic sensitive devices (ESD)
  • A.1 What does ESD mean?
  • A.2 Electrostatic charging
  • A.3 Basic protective measures against discharge of static electricity
• B Technical Specifications
  • B.1 Technical Specifications of the SIMA TIC Box PC 620
• Glossary
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • K
  • L
  • M
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W
  • X
• Back