Siemens Sipart Ps2 6Dr50Xx Users Manual S3 4

2015-02-05

• SIPART PS2 Manual
  • Contents
  • 0 Information for the Operator
    • 0.1 General information
    • 0.2 Classification of Safety Related Notices
    • 0.3 Qualified Personnel
    • 0.4 Use as intended
    • 0.5 Technical Documentation
    • 0.6 Warranty Information
    • 0.7 Delivery Notes
    • 0.8 Standards and Regulations
  • 1 Introduction
    • 1.1 General information about the positioner
  • 2 Design and Method of Operation
    • 2.1 Overview
    • 2.2 Name plate design
    • 2.3 Instrument Components
      • 2.3.1 Motherboard
      • 2.3.2 Electrical Connections
      • 2.3.3 Pneumatic Connections
      • 2.3.4 Mounting Kit
      • 2.3.5 Purge air switching (not in the explosion proof version)
      • 2.3.6 Restrictors
    • 2.4 Method of Operation
    • 2.5 HART-function
    • 2.6 State as supplied
    • 2.7 Installation of options modules
      • 2.7.1 Installation of options modules in normal and intrinsically safe
      • 2.7.2 Installation of options modules in explosion proof version
      • 2.7.3 Iy-module
      • 2.7.4 Alarm module
      • 2.7.5 SIA module
      • 2.7.6 Mechanical limit switch module
      • 2.7.7 EMC filter module
      • 2.7.8 Accessories
  • 3 Preparing for Operation
    • 3.1 Instrument identification (type key)
    • 3.2 Dimensional drawings
    • 3.3 Assembly
      • 3.3.1 Instructions for using positioners in a wet environment
      • 3.3.2 Instructions for using positioners which are exposed to strong
      • 3.3.3 Mounting kit “linear actuator” 6DR4004-8V and 6DR4004-8L
      • 3.3.4 Assembly procedure (see figure 3-7, page 51)
      • 3.3.5 Mounting kit “part-turn actuator” 6DR4004-8D
      • 3.3.6 Assembly procedure (see figure 3-8 and figure 3-9)
    • 3.4 Electrical Connection
      • 3.4.1 Connection in non-intrinsically safe and explosion proof version
      • 3.4.2 Connection in intrinsically safe version
      • 3.4.3 Connection in type of protection “n” version
    • 3.5 Pneumatic Connection
    • 3.6 Commissioning
      • 3.6.1 Preparations for linear actuators
      • 3.6.2 Automatic initialization of linear actuator
      • 3.6.3 Manual initialization of linear actuator
      • 3.6.4 Preparations for part-turn actuator
      • 3.6.5 Automatic initialization of part-turn actuator
      • 3.6.6 Manual initialization of part-turn actuators
      • 3.6.7 Automatic initialization (structograms)
    • 3.7 Copying initialization data (positioner exchange)
  • 4 Operation
    • 4.1 Display
    • 4.2 Input keys
    • 4.3 Operating modes
    • 4.4 Parameters
    • 4.5 Diagnosis
      • 4.5.1 Diagnostic display
      • 4.5.2 Meaning of the diagnosis values
      • 4.5.3 Online diagnosis
      • 4.5.4 Fault correction
    • 4.6 Meaning of the other display text
    • 4.7 Optimizing the controller data
  • 5 Service and Maintenance
  • 6 Technical Data
  • 7 Scope of Delivery
    • 7.1 Scope of delivery of standard controller
    • 7.2 Scope of delivery of options
    • 7.3 Scope of delivery of accessories
    • 7.4 List of Spare Parts
  • 8 Index
  • 9 Appendix
    • 9.1 Literature and catalogs