Sierra Wireless AB300A Cellular 3W Power Booster for CDPD Modem User Manual FCC300

Sierra Wireless Inc. Cellular 3W Power Booster for CDPD Modem FCC300

Manual

AirBlaster User Guide Warnings and Regulatory Text
User Guide text in the section Safety and Hazards:
Safety and Hazards
Do not operate the Sierra Wireless RF amplifier in areas where blasting is in progress,
where explosive atmospheres may be present, near medical equipment, near life support
equipment, or any equipment which may be susceptible to any form of radio interference.
In such areas, the host communications device MUST BE TURNED OFF. The RF
amplifier can transmit signals that could interfere with this equipment.
Do not operate your data transmitter in close proximity to any aircraft, whether the
aircraft is on the ground or in flight. Near aircraft, the host communications device
MUST BE TURNED OFF. When operating, the AirBlaster RF amplifier can transmit
signals that could interfere with various onboard systems.
The driver or operator of any vehicle should not operate a wireless data device while in
control of a vehicle. Doing so will detract from the driver or operator's control and
operation of that vehicle. In some states and provinces, operating such communications
devices while in control of a vehicle is an offence.
Regulatory Information
The equipment certifications appropriate to your device are marked on the device and the
accompanying product specific information. Where appropriate, the use of the
equipment is subject to the following conditions:
CAUTION – Unauthorized modifications or changes not expressly
approved by Sierra Wireless, Inc. could void compliance with regulatory
rules, and thereby your authority to use this equipment.
WARNING (EMI) - United States FCC Information - This
equipment has been tested and found to comply with the limits pursuant
to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in an appropriate
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
WARNING (EMI) - Canada - This digital apparatus does not exceed
the Class A limits for radio noise emissions from digital apparatus as set
out in the interference causing equipment standard entitled "Digital
Apparatus", ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe A prescrites dans la
norme sur le matériel brouilleur: "Appareils Numériques", NMB-003
édictée par le ministre des Communications.

Navigation menu