Sierra Wireless AB300A Cellular 3W Power Booster for CDPD Modem User Manual AirBooster 350 User Guide

Sierra Wireless Inc. Cellular 3W Power Booster for CDPD Modem AirBooster 350 User Guide

rev 2 manual pages

Download: Sierra Wireless AB300A Cellular 3W Power Booster for CDPD Modem User Manual AirBooster 350 User Guide
Mirror Download [FCC.gov]Sierra Wireless AB300A Cellular 3W Power Booster for CDPD Modem User Manual AirBooster 350 User Guide
Document ID93405
Application IDFu7F8B9/HCBaCV2Z5/BN5A==
Document Descriptionrev 2 manual pages
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.38kB (42254 bits)
Date Submitted2000-03-27 00:00:00
Date Available2000-03-31 00:00:00
Creation Date2000-03-27 12:05:51
Producing SoftwareAcrobat Web Capture 4.0
Document Lastmod2000-03-27 12:08:56
Document TitleAirBooster 350 User Guide
Document Author: Reid Hart

User Guide
2110195 Rev 1.1
March 2000
o Welcome
o Overview
o Components
o Supported Prods.
o Safety Notices
o Specifications
o Installation
o Using AirBooster
o Troubleshooting
o Service
o Contact Us
Welcome to the AirBooster™ 350 RF amplifier
The AirBooster 350 is an intelligent RF amplifier for boosting some Sierra
Wireless Class III (600mW) CDPD devices to Class I (3W). The amplifier is
an "intelligent" booster in that it does not simply apply a fixed gain to a
varying input RF level as a linear amplifier would. Instead, the AirBooster
amplifier takes a constant RF level from the CDPD device and applies as
much gain as the CDPD system requires at that moment.
A GPS Option is also available, adding a GPS receiver inside the package.
This is available as a field upgrade kit or pre-installed at the factory.
Documentation related to GPS is covered in a separate section.
Your AirBooster 350 Components
All AirBooster 350 packages will include the following components:
●
●
●
AirBooster™ 350 RF amplifier.
Power Cable.
Sierra Wireless Product CD-ROM with this Documentation including a
3 Year Warranty.
4 Screws with Washers.
Mounting Template.
● Quick Start Guide.
Units with the factory installed GPS option will also include:
● DB-9 Serial Cable.
Additional accessories are available from Sierra Wireless. These include:
●
●
RF Connector Cables (an assortment of lengths and connector options
are available).
● GPS Options (Factory Installed or Field Upgrade Kit).
● GPS antennas (Magnetic or Hard Mount options).
For details on these and other Sierra Wireless accessories contact sales or
visit our web site.
●
Supported Products
At the time of this writing, the AirBooster 350 RF amplifier is supported by
the following Sierra Wireless products:
AirCard® 350 CDPD Adapter
● SB300 OEM Module
Additional Sierra Wireless products may be added to this list. Consult our
web site for a complete and current list.
●
CAUTION - The AirBooster 350 amplifier is designed to be
used exclusively with supported Sierra Wireless products.
Attaching non-supported devices will not harm the device or the
amplifier but will severely impair transmissions from the device.
o Welcome (top)
o Overview
o Safety Notices
o Hazards
o Regulatory
o Patents
o Specifications
Important Notice
Because of the nature of wireless communications, transmission and
reception of data can never be guaranteed. Data may be delayed, corrupted
(i.e., have errors) or be totally lost. Although significant delays or losses of
data are rare when wireless devices such as the AirBooster 350 RF amplifier
are used in a normal manner with a well-constructed network, they should not
be used in situations where failure to transmit or receive data could result in
damage of any kind to the user or any other party, including but not limited to
personal injury, death, or loss of property. Sierra Wireless, Inc. accepts no
responsibility for damages of any kind resulting from delays or errors in data
transmitted or received using the AirBooster 350 RF amplifier, or for failure
of the AirBooster 350 amplifier to transmit or receive such data.
Safety and Hazards
Do not operate the AirBooster amplifier in areas where blasting is in
progress, where explosive atmospheres may be present, near medical
equipment, near life support equipment, or any equipment which may be
susceptible to any form of radio interference. In such areas, the host
communications device MUST BE TURNED OFF. The RF amplifier can
transmit signals that could interfere with this equipment.
Do not operate your data transmitter in close proximity to any aircraft,
whether the aircraft is on the ground or in flight. Near aircraft, the host
communications device MUST BE TURNED OFF. When operating, the
AirBooster RF amplifier can transmit signals that could interfere with various
onboard systems.
The driver or operator of any vehicle should not operate a wireless data
device while in control of a vehicle. Doing so will detract from the driver or
operator's control and operation of that vehicle. In some states and provinces,
operating such communications devices while in control of a vehicle is an
offence.
WARNING - The FCC has developed guidelines to reduce any
possible hazard due to exposure of the human body to
electromagnetic radiation (i.e. to radio waves). This device is
approved for operation with specific Sierra Wireless modem
transmitters using a 3dB gain Cellular Mobile whip antenna with
at least 0.6dB cable loss, as described in the filing. The antenna
installation must provide a separation distance of 20cm (8") or
more between the antenna and all persons to satisfy MPE
compliance.
WARNING - For FCC compliance only antennas meeting the
following attributes should be used:
● Rated gain of 3dBd
● Collinear (coil style)
design with
dimensions as shown
in the illustration at
right. The antenna
may be encapsulated
or open.
● Mount designed for a
horizontal metal
surface of vehicle
using either magnetic
or through-hole hard mounting.
● Cable loss of more than 0.6dB.
Regulatory Information
The equipment certifications appropriate to your device are marked on the
device and the accompanying product specific information. Where
appropriate, the use of the equipment is subject to the following conditions:
CAUTION - Unauthorized modifications or changes not
expressly approved by Sierra Wireless, Inc. could void
compliance with regulatory rules, and thereby your authority to
use this equipment.
WARNING (EMI) - United States FCC Information - This
equipment has been tested and found to comply with the limits
pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in
an appropriate installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna
● Increase the separation between the equipment and
receiver
● Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
● Consult the dealer or an experienced radio/TV technician
for help
WARNING (EMI) - Canada - This digital apparatus does not
exceed the Class A limits for radio noise emissions from digital
apparatus as set out in the interference causing equipment
standard entitled "Digital Apparatus", ICES-003 of the
Department of Communications.
Cet appareil numérique respecte les limites de bruits
radioélectriques applicables aux appareils numériques de
Classe A prescrites dans la norme sur le matériel brouilleur:
"Appareils Numériques", NMB-003 édictée par le ministre des
Communications.
Patents and Trademarks
Portions of this product are covered by some or all of the following US
patents: 5515013, 5617106, 5629960, 5682602, 5748449, 5845216, 5845553,
5878234, 5890057, and other patents pending.
©1998, 1999 Sierra Wireless, Inc. All rights reserved.
The information in this manual is subject to change without notice and does
not represent a commitment on the part of Sierra Wireless, Inc. Sierra
Wireless, Inc. shall not be liable for incidental or consequential damages
resulting from the furnishing, performance, or use of this manual.
AirBooster™ is a trademark of Sierra Wireless, Inc.
AirCard® is a registered trademark of Sierra Wireless, Inc.
All other brand or product names, logos, trademarks, etc. mentioned in this
manual are owned by their respective companies.
o Welcome (top)
o Overview
o Safety Notices
o Specifications
o RF Amplifier
o Environmental
o DB-9 Pinouts
Technical Specifications
AirBooster 350 RF Amplifier
Compliance:
CDPD Release 1.1
FCC Parts 15 and 22
Voltage:
Standard vehicle battery
11 - 16 Vdc (13.8 Vdc nominal)
Power Reduction Mode: 105mA (typical)
Enabled (Receive): 128mA (287mA w/GPS)
Maximum Transmit: 1.63A (1.8A w/GPS)
Class I mobile
Up to 4.5 Watts ERP from device
(depending on antenna/cabling)
Current:
Transmitter Power:
CDPD Device Interface:
Antenna Interface:
GPS Interface:
SMA RF connector
50 ohm TNC RF connector
DB-9 at RS-232 level
non-standard pinouts.
GPS Antenna Interface:
SMB RF connector
Environmental Specifications
Operating Temp:
Storage Temp:
Humidity:
-30 to +70° C (restricted duty cycle)
-30 to +60° C (un-restriced duty cycle)
-40 to +80° C
5 - 95%, non-condensing
Vibration:
MIL-STD-810E,I-3.4.9.
GPS DB-9 Connector Pinouts
Pin # RS-232
AirBooster Application
DCD
1 Pulse/sec output from GPS module
RxD
RxD (from GPS to host)
TxD
TxD (from host to GPS)
DTR
GND
Input (reserved, DTR is accepted)
GND Signal Ground
DSR
RTS
CTS
RI
Output (reserved)
TxD_2 (from host to GPS secondary port)
RxD_2 (from GPS secondary port to host)
Output (reserved, disregard signal)
Document Map
Use the document map to jump to a subject of interest or turn the pages to
read the full manual.
Back to Product List
Page Top
©1999,2000 Sierra Wireless, Inc. All rights reserved.
Next Page

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2000:03:27 12:08:56-08:00
Create Date                     : 2000:03:27 12:05:51
Producer                        : Acrobat Web Capture 4.0
Title                           : AirBooster 350 User Guide
Subject                         : 2110195 Rev 1.1
Author                          : Reid Hart
Page Count                      : 5
Page Mode                       : UseNone
EXIF Metadata provided by EXIF.tools
FCC ID Filing: N7NAB300A

Navigation menu