Sierra Wireless MC7350L Wireless Module User Manual AirPrime MC7350 L Hardware Integration Guide

Download:
Mirror Download [FCC.gov]
Document ID	2151432
Application ID	TVaf+oO/BheQVHMHVEgu6g==
Document Description	MC7350-L - Hardware Integration Guide - Rev1.1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	56.72kB (708960 bits)
Date Submitted	2013-12-25 00:00:00
Date Available	2014-06-25 00:00:00
Creation Date	2017-10-24 12:00:21
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-24 12:00:21
Document Title	AirPrime MC7350-L Hardware Integration Guide
Document Creator	Microsoft® Word 2010
Document Author:	Sierra Wireless

Hardware Integration Guide
AirPrime MC7350-L
4115034
1.1
December 10, 2013
Hardware Integration Guide
Important Notice
Due to the nature of wireless communications, transmission and reception of data can never be
guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant
delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used
in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used
in situations where failure to transmit or receive data could result in damage of any kind to the user or
any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless
accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or
received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or
receive such data.
Safety and Hazards
Do not operate the Sierra Wireless modem in areas where cellular modems are not advised without
proper device certifications. These areas include environments where cellular radio can interfere such
as explosive atmospheres, medical equipment, or any other equipment which may be susceptible to
any form of radio interference. The Sierra Wireless modem can transmit signals that could interfere
with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is
on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When
operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard
systems.
Note:
Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door
is open. Sierra Wireless modems may be used at this time.
The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of
a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In
some states and provinces, operating such communications devices while in control of a vehicle is an
offence.
Limitations of Liability
This manual is provided “as is”. Sierra Wireless makes no warranties of any kind, either expressed or
implied, including any implied warranties of merchantability, fitness for a particular purpose, or
noninfringement. The recipient of the manual shall endorse all risks arising from its use.
The information in this manual is subject to change without notice and does not represent a
commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES
SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL,
GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING,
BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR
REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS
PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY
THIRD PARTY.
Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability
arising under or in connection with the Sierra Wireless product, regardless of the number of events,
occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the
Sierra Wireless product.
Customer understands that Sierra Wireless is not providing cellular or GPS (including A-GPS)
services. These services are provided by a third party and should be purchased directly by the
Customer.
4115034
Rev 1.1
December 10, 2013
Hardware Integration Guide
SPECIFIC DISCLAIMERS OF LIABILITY: CUSTOMER RECOGNIZES AND ACKNOWLEDGES
SIERRA WIRELESS IS NOT RESPONSIBLE FOR AND SHALL NOT BE HELD LIABLE FOR ANY
DEFECT OR DEFICIENCY OF ANY KIND OF CELLULAR OR GPS (INCLUDING A-GPS)
SERVICES.
Patents
This product may contain technology developed by or for Sierra Wireless Inc.
®
This product includes technology licensed from QUALCOMM .
This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more patents
licensed from InterDigital Group and MMP Portfolio Licensing.
Copyright
© 2013 Sierra Wireless. All rights reserved.
Trademarks
®
®
®
®
®
Sierra Wireless , AirPrime , AirLink , AirVantage , WISMO and the Sierra Wireless and Open AT
logos are registered trademarks of Sierra Wireless, Inc. or one of its subsidiaries.
®
Watcher is a registered trademark of NETGEAR, Inc., used under license.
®
®
Windows and Windows Vista are registered trademarks of Microsoft Corporation.
®
®
Macintosh and Mac OS X are registered trademarks of Apple Inc., registered in the U.S. and other
countries.
®
QUALCOMM is a registered trademark of QUALCOMM Incorporated. Used under license.
Other trademarks are the property of their respective owners.
Contact Information
Sales Desk:
Post:
Technical Support:
RMA Support:
Fax:
Web:
Phone:
1-604-232-1488
Hours:
8:00 AM to 5:00 PM Pacific Time
Contact:
http://www.sierrawireless.com/sales
Sierra Wireless
13811 Wireless Way
Richmond, BC
Canada
V6V 3A4
support@sierrawireless.com
repairs@sierrawireless.com
1-604-231-1109
http://www.sierrawireless.com/
Consult our website for up-to-date product descriptions, documentation, application notes, firmware
upgrades, troubleshooting tips, and press releases: www.sierrawireless.com
4115034
Rev 1.1
December 10, 2013
Hardware Integration Guide
Document History
Version
1.0
1.1
4115034
Date
December 10, 2013
Updates
Creation
Updated 5.3 Important Compliance Information for North American Users
Rev 1.1
December 10, 2013
Contents
1. INTRODUCTION .................................................................................................. 7
1.1.
Hardware Development Components ............................................................................... 7
2. POWER INTERFACE ........................................................................................... 8
2.1.
Power Supply .................................................................................................................... 8
2.2.
Electrostatic Discharge (ESD) ........................................................................................... 8
2.3.
Power States ..................................................................................................................... 9
3. RF INTEGRATION ............................................................................................. 10
3.1.
Supported RF Bands .......................................................................................................10
3.2.
Ground Connection .........................................................................................................10
3.3.
Shielding Guidelines ........................................................................................................10
3.4.
Antenna Guidelines .........................................................................................................11
3.4.1.
Choosing the Correct Antenna and Cabling ............................................................11
3.4.2.
Designing Custom Antennas ...................................................................................11
3.4.3.
Determining the Antenna’s Location ........................................................................11
3.4.4.
Disabling the Diversity Antenna ...............................................................................11
3.5.
RF Desense Sources ......................................................................................................12
4. AUDIO INTERFACE ........................................................................................... 13
5. REGULATORY INFORMATION......................................................................... 14
5.1.
Important Notice ..............................................................................................................14
5.2.
Safety and Hazards .........................................................................................................14
5.3.
Important Compliance Information for North American Users ........................................15
6. REFERENCES ................................................................................................... 17
6.1.
Reference Documents .....................................................................................................17
6.2.
List of Abbreviations ........................................................................................................17
4115034
Rev 1.1
December 10, 2013
List of Tables
Table 1.
Power Supply Requirements ............................................................................................. 8
Table 2.
ESD Specifications ............................................................................................................ 8
Table 3.
Supported MC7350-L Power States ................................................................................. 9
Table 4.
Supported RF Bands ....................................................................................................... 10
Table 5.
Audio Pin Description ...................................................................................................... 13
4115034
Rev 1.1
December 10, 2013
1. Introduction
The Sierra Wireless MC7350-L PCI Express Mini Card is a compact, lightweight, wireless LTE-based
modem.
It provides LTE connectivity for networking.
1.1.
Hardware Development Components
Sierra Wireless manufactures the MC Series Development Kit, a hardware development component
that is used to facilitate the hardware integration process. This development kit is the hardware
development board on which an MC mini card is plugged. The development kit provides access to all
of the interfaces supported by the MC mini card.
For instructions on using the MC Development Kit, see document [2] AirPrime MC Series
Development Kit Quick Start Guide.
4115034
Rev 1.1
December 10, 2013
2. Power Interface
2.1.
Power Supply
The host device must provide power to the MC7350-L mini card over pins 2, 24, 39, 41 and 52 (VCC)
as detailed in the following table.
Table 1.
Power Supply Requirements
Signal
Name
Pin
VCC
2, 24, 39, 41, 52
GND
4, 9, 15, 18, 21, 26,
27, 29, 34, 35, 37,
40, 43, 50
Specification
Minimum
Typical
Maximum
Unit
Voltage range
3.0
3.3
3.6
Ripple voltage
100
mVpp
Note:
The host must provide safe and continuous power at all times; the module does not have an
independent power supply, or protection circuits to guard against electrical issues.
2.2.
Electrostatic Discharge (ESD)
The OEM is responsible for ensuring that the Mini Card host interface pins are not exposed to ESD
during handling or normal operation.
Note:
Table 2.
The level of protection required depends on your application.
ESD Specifications
Connection
Specification
Operational
The RF port (antenna launch and RF connector) complies with the IEC 61000-4-2 standard:

Electrostatic Discharge Immunity:

Test: Level3

Contact Discharge: ±6 kV
 Air Discharge: ±8 kV
Non-operational
The host connector Interface complies with the following standard only:

±2 kV Human Body Model (JESD22-A114-B)
4115034
Rev 1.1
December 10, 2013
Hardware Integration Guide
2.3.
Power Interface
Power States
The MC7350-L mini card has four power states as detailed in the following table.
Normal
(Default
state)

Module is active

Default state when VCC is first applied in the
absence of W_DISABLE_N control

Module is capable of placing / receiving calls,
or establishing data connections on the
wireless network

Current consumption is affected by several
factors, including:

Radio band being used

Transmit power

Receive gain settings

Data rate

Number of active Tx time slots

Module is active

Module enters this state:

Under host interface control:

Host issues AT+CFUN=0, or
Low power
(‘Airplane
mode’)


Sleep
Disconnected
4115034
RF Enabled
Details
USB
Interface
Active
State
Module is
Powered
Supported MC7350-L Power States
Host is
Powered
Table 3.
















Host asserts W_DISABLE_N, after
AT!PCOFFEN=0 has been issued.
Automatically, when critical temperature or
voltage trigger limits have been reached

Normal state of module between calls or data
connections

Module cycles between wake (polling the
network) and sleep, at network providerdetermined interval.
Host power source is disconnected from the module and
all voltages associated with the module are at 0 V.
Rev 1.1
December 10, 2013
3. RF Integration
3.1.
Supported RF Bands
Table 4.
Supported RF Bands
Band/Connectivity
Data Rates
LTE Band 4
(AWS 1700/2100 MHz)
HSPA+ rates
LTE Band 13
(700 MHz)

Downlink: Up to 42 Mbps (category 24)

Uplink: Up to 5.76 Mbps (category 7)
MIMO support
Circuit-switched data bearers up to 64 kbps
GPS
1575.42 MHz
GLONASS
1602 MHz
3.2.
Notes
Ground Connection
When connecting the mini card to system ground:

Prevent noise leakage by establishing a very good ground connection to the mini card
through the host connector.

Connect to system ground using the two mounting holes at the top of the module. (Refer to
document [1] AirPrime MC7350 and MC7350-L Product Technical Specification and
Customer Design Guidelines for more information.)

Minimize ground noise leakage into the RF. Depending on the host board design, noise could
potentially be coupled to the mini card from the host board. This is mainly an issue for host
designs that have signals traveling along the length of the mini card, or when circuitry
operating at both ends of the mini card interconnects.
3.3.
Shielding Guidelines
The mini card is fully shielded to protect against EMI and to ensure compliance with FCC Part 15 “Radio Frequency Devices” (or equivalent regulations in other jurisdictions).
Note:
4115034
The module shields must NOT be removed.
Rev 1.1
December 10, 2013
10
Hardware Integration Guide
3.4.
RF Integration
Antenna Guidelines
When selecting the antenna and cable, it is critical to RF performance to match antenna gain and
cable loss.
3.4.1.
Choosing the Correct Antenna and Cabling
Consider the following points for appropriate antenna selection:

The antenna (and associated circuitry) should have a nominal impedance of 50Ω with a return
loss of better than 10 dB across each frequency band of operation.

The system gain value affects both radiated power and regulatory (FCC, IC, etc.) test results.
3.4.2.
Designing Custom Antennas
Note that in designing custom antennas, a skilled RF engineer should do the development to ensure
that the RF performance is maintained.
3.4.3.
Determining the Antenna’s Location
Consider the following points when deciding where to place the antenna:

Antenna location may affect RF performance. Although the module is shielded to prevent
interference in most applications, the placement of the antenna is still very important – if the
host device is insufficiently shielded, high levels of broadband or spurious noise can degrade
the module’s performance.

Connecting cables between the module and the antenna must have 50Ω impedance. If the
impedance of the module is mismatched, RF performance is reduced significantly.

Antenna cables should be routed, if possible, away from noise sources (switching power
supplies, LCD assemblies, etc.). If the cables are near the noise sources, the noise may be
coupled into the RF cable and into the antenna.
3.4.4.
Disabling the Diversity Antenna
Use the AT command !RXDEN=0 to disable receive diversity or !RXDEN=1 to enable receive diversity.
Note:
4115034
A diversity antenna is used to improve connection quality and reliability through redundancy.
Because two antennas may experience difference interference effects (signal distortion, delay,
etc.), when one antenna receives a degraded signal, the other may not be similarly affected.
Rev 1.1
December 10, 2013
11
Hardware Integration Guide
3.5.
RF Integration
RF Desense Sources
Common sources of interference that may affect the module’s RF performance (RF desense) include:

Power supply noise
 Can lead to noise in the RF signal
 Module power supply ripple limit <= 100 mVp-p 1 Hz–100 kHz

Interference from other embedded wireless devices
 Any harmonics, sub-harmonics, or cross-products of signals that fall in the module’s Rx
range may cause spurious response, resulting in decreased Rx performance.
 Tx power and corresponding broadband noise may overload or increase the noise floor of
the module’s receiver, resulting in RF desense.
 Severity of interference depends on proximity of other antennas to the module’s
antennas.

Host electronic device-generated RF
 Proximity of host electronics to the module’s antenna can contribute to decreased Rx
performance.
 Some devices include microprocessor and memory, display panel and display drivers,
and switching mode power supplies.
Note:
4115034
In practice, there are usually numerous interfering frequencies and harmonics. The net effect can
be a series of desensitized receive channels.
Rev 1.1
December 10, 2013
12
4. Audio Interface
The MC7350-L supports a PCM/I S digital audio interface using a dedicated serial link for digital audio
data; all other signals, such as subcoding and control, are transmitted separately. The audio interface
can be switched from PCM to I S and vice versa via AT commands.
Table 5.
Audio Pin Description
Signal Name
Pin
Description
PCM_CLK/I2S_CLK
45
PCM Clock/I S Clock
PCM_DOUT/I2S_DOUT
47
PCM Data Out/I S Data Out
PCM_DIN/I2S_DIN
49
PCM Data In/I S Data In
PCM_SYNC/I2S_WS
51
PCM SYNC/I S WS
4115034
Rev 1.1
December 10, 2013
13
5. Regulatory Information
This module is designed to meet, and upon commercial release, will meet the requirements of the
following regulatory bodies and regulations, where applicable:

Federal Communications Commission (FCC) of the United States

The Certification and Engineering Bureau of Industry Canada (IC)

The National Communications Commission (NCC) of Taiwan, Republic of China
Upon commercial release, the following industry approvals will have been obtained, where applicable:

CDG2
Additional certifications may be obtained upon customer request; contact your Sierra Wireless
account representative for details.
Additional testing and certification may be required for the end product with an embedded MC7350-L
modem and are the responsibility of the OEM. Sierra Wireless offers professional services-based
assistance to OEMs with the testing and certification process, if required.
5.1.
Important Notice
Because of the nature of wireless communications, transmission and reception of data can never be
guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant
delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used
in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used
in situations where failure to transmit or receive data could result in damage of any kind to the user or
any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless
and its affiliates accept no responsibility for damages of any kind resulting from delays or errors in
data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless
modem to transmit or receive such data.
5.2.
Safety and Hazards
Do not operate your MC7350-L modem:

In areas where blasting is in progress

Where explosive atmospheres may be present including refuelling points, fuel depots, and
chemical plants

Near medical equipment, life support equipment, or any equipment which may be susceptible
to any form of radio interference. In such areas, the MC7350-L modem MUST BE POWERED
OFF. Otherwise, the MC7350-L modem can transmit signals that could interfere with this
equipment.
In an aircraft, the MC7350-L modem MUST BE POWERED OFF. Otherwise, the MC7350-L modem
can transmit signals that could interfere with various onboard systems and may be dangerous to the
operation of the aircraft or disrupt the cellular network. Use of a cellular phone in an aircraft is illegal in
some jurisdictions. Failure to observe this instruction may lead to suspension or denial of cellular
telephone services to the offender, or legal action or both.
Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is
open. The MC7350-L modem may be used normally at this time.
4115034
Rev 1.1
December 10, 2013
14
Hardware Integration Guide
Regulatory Information
5.3.
Important Compliance Information for North
American Users
Note:
Details are preliminary and subject to change.
The MC7350-L modem has been granted modular approval for mobile applications. Integrators may
use the MC7350-L modem in their final products without additional FCC / IC (Industry Canada)
certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be
obtained.
1. At least 20 cm separation distance between the antenna and the user’s body must be
maintained at all times.
2. To comply with FCC / IC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only
exposure condition must not exceed:
 6.0 dBi in LTE Band 4
 9.0 dBi in LTE Band 13
3. The MC7350-L modem may transmit simultaneously with other collocated radio transmitters
within a host device, provided the following conditions are met:
 Each collocated radio transmitter has been certified by FCC / IC for mobile application.
 At least 20 cm separation distance between the antennas of the collocated transmitters
and the user’s body must be maintained at all times.
 The output power and antenna gain must not exceed the limits and configurations
stipulated in the following table.
Device
Technology
MC7350-L
LTE
Band
Frequency
(MHz)
Maximum
Conducted
Power (dBm)
Maximum
Antenna Gain
(dBi)
1710–1755
24
13
777–787
24
2400–2500
29
5.0
5150–5850
29
5.0
2300–2400
29
5.0
2500–2700
29
5.0
3300–3800
29
5.0
2400–2500
15
5.0
WLAN
Collocated
transmitters*
WiMAX
BT
Valid collocated transmitter combinations: WLAN+BT; WiMAX+BT. (WLAN+WiMAX+BT is not permitted.)
4. A label must be affixed to the outside of the end product into which the MC7350-L modem is
incorporated, with a statement similar to the following:
This device contains FCC ID: N7NMC7350L
Contains transmitter module IC: 2417C-MC7350L
where 2417C-MC7350L is the module’s certification number.
5. A user manual with the end product must clearly indicate the operating requirements and
conditions that must be observed to ensure compliance with current FCC / IC RF exposure
guidelines.
4115034
Rev 1.1
December 10, 2013
15
Hardware Integration Guide
Regulatory Information
The end product with an embedded MC7350-L modem may also need to pass the FCC Part 15
unintentional emission testing requirements and be properly authorized per FCC Part 15.
Note:
4115034
If this module is intended for use in a portable device, you are responsible for separate approval to
satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102.
Rev 1.1
December 10, 2013
16
6. References
6.1.
[1]
Reference Documents
AirPrime MC7350 and MC7350-L Product Technical Specification and Customer Design
Guidelines
Reference: 4114103
[2]
AirPrime MC Series Development Kit Quick Start Guide
Reference: 2130705
6.2.
List of Abbreviations
Abbreviation
Definition
AC
Alternative Current
ADC
Analog to Digital Converter
A/D
Analog to Digital conversion
AF
Audio-Frequency
AT
Attention (prefix for modem commands)
AUX
Auxiliary
CAN
Controller Area Network
CB
Cell Broadcast
CEP
Circular Error Probable
CLK
Clock
CMOS
Complementary Metal Oxide Semiconductor
CS
Coding Scheme
CTS
Clear To Send
DAC
Digital to Analogue Converter
dB
Decibel
DC
Direct Current
DCD
Data Carrier Detect
DCE
Data Communication Equipment
DCS
Digital Cellular System
DR
Dynamic Range
DSR
Data Set Ready
DTE
Data Terminal Equipment
DTR
Data Terminal Ready
EDGE
Enhance Data rates for GSM Evolution
EFR
Enhanced Full Rate
E-GSM
Extended GSM
EGPRS
Enhance GPRS
EMC
Electromagnetic Compatibility
4115034
Rev 1.1
December 10, 2013
17
Hardware Integration Guide
References
Abbreviation
Definition
EMI
Electromagnetic Interference
EMS
Enhanced Message Service
EN
Enable
ESD
Electrostatic Discharges
FIFO
First In First Out
FR
Full Rate
FTA
Full Type Approval
GND
Ground
GPI
General Purpose Input
GPC
General Purpose Connector
GPIO
General Purpose Input Output
GPO
General Purpose Output
GPRS
General Packet Radio Service
GPS
Global Positioning System
GSM
Global System for Mobile communications
HR
Half Rate
I/O
Input / Output
LED
Light Emitting Diode
LGA
Land Grid Array
LNA
Low Noise Amplifier
MAX
Maximum
MIC
Microphone
MIN
Minimum
MMS
MultiMedia Message Service
MO
Mobile Originated
MT
Mobile Terminated
na
Not Applicable
NC
Not Connected
NF
Noise Factor
NMEA
National Marine Electronics Association
NOM
Nominal
NTC
Negative Temperature Coefficient
PA
Power Amplifier
Pa
Pascal (for speaker sound pressure measurements)
PBCCH
Packet Broadcast Control Channel
PC
Personal Computer
PCB
Printed Circuit Board
PDA
Personal Digital Assistant
PFM
Power Frequency Modulation
PSM
Phase Shift Modulation
PWM
Pulse Width Modulation
RAM
Random Access Memory
RF
Radio Frequency
4115034
Rev 1.1
December 10, 2013
18
Hardware Integration Guide
References
Abbreviation
Definition
RFI
Radio Frequency Interference
RHCP
Right Hand Circular Polarization
RI
Ring Indicator
RST
Reset
RTC
Real Time Clock
RTCM
Radio Technical Commission for Maritime services
RTS
Request To Send
RX
Receive
SCL
Serial Clock
SDA
Serial Data
SIM
Subscriber Identification Module
SMS
Short Message Service
SPI
Serial Peripheral Interface
SPL
Sound Pressure Level
SPK
Speaker
SRAM
Static RAM
TBC
To Be Confirmed
TDMA
Time Division Multiple Access
TP
Test Point
TVS
Transient Voltage Suppressor
TX
Transmit
TYP
Typical
UART
Universal Asynchronous Receiver-Transmitter
USB
Universal Serial Bus
USSD
Unstructured Supplementary Services Data
VSWR
Voltage Standing Wave Ratio
4115034
Rev 1.1
December 10, 2013
19


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Sierra Wireless
Create Date                     : 2013:12:10 16:41:43+08:00
Keywords                        : "4115034;, Wireless, CPU;, wireless, module;, wireless, modules;, wireless, modem;, wireless, modems;, modem, wireless;, GSM, module;, GSM, modules;, GPRS, module;, GSM, modem;, GSM, modems;, GSM, GPRS, modem;, CDMA, modem;, modem, CDMA;, CDMA, wireless, modem;, EDGE, modem;, cellular, modem;, wireless, modem;, modem, GSM;, wireless, GPS, module;, HSxPA, modem;, HSDPA, modem;, HSUPA, modem;, WISMO;, cellular, software;, software, cellular;, wireless, software;, GSM, software;, Lua;, GSM, GPS;, GPS, GSM;, CDMA, GSM;, EDGE;, HSDPA;, HSUPA;, HSxPA;, GSM, satellite;, satellite, GPS;, cellular, satellite;, GPS, satellite;, M2M;, machine-to-machine;, embedded, wireless;, gsm, tracking;, fleet, management;, GSM, POS;, GSM, automotive;, telematics;, GPS, wireless;, satellite, location;, tracking, system;, satellite, tracking;, wireless, alarm, system;, smart, metering;, wireless, automotive;, tracking, systems;, eCall;"
Modify Date                     : 2013:12:10 18:04:12+08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2013:12:10 18:04:12+08:00
Producer                        : Microsoft® Word 2010
Marked                          : True
Format                          : application/pdf
Creator                         : Sierra Wireless
Description                     : AirPrime MC7350-L Hardware Integration Guide
Title                           : AirPrime MC7350-L Hardware Integration Guide
Subject                         : 4115034; Wireless CPU; wireless module; wireless modules; wireless modem; wireless modems; modem wireless; GSM module; GSM modules; GPRS module; GSM modem; GSM modems; GSM GPRS modem; CDMA modem; modem CDMA; CDMA wireless modem; EDGE modem; cellular modem; wireless modem; modem GSM; wireless GPS module; HSxPA modem; HSDPA modem; HSUPA modem; WISMO; cellular software; software cellular; wireless software; GSM software; Lua; GSM GPS; GPS GSM; CDMA GSM; EDGE; HSDPA; HSUPA; HSxPA; GSM satellite; satellite GPS; cellular satellite; GPS satellite; M2M; machine-to-machine; embedded wireless; gsm tracking; fleet management; GSM POS; GSM automotive; telematics; GPS wireless; satellite location; tracking system; satellite tracking; wireless alarm system; smart metering; wireless automotive; tracking systems; eCall;
Document ID                     : uuid:22b2c25e-833a-4734-8c18-aeb5873bbe40
Instance ID                     : uuid:6ef6d05f-15c1-4f33-afb5-48748f5ef657
Page Count                      : 20

EXIF Metadata provided by EXIF.tools