Sierra Wireless PC3200P WIRELESS PCMCIA CDMA DATA MODEM User Manual QX Connection Card Online Guide 9 20 02
Sierra Wireless, Inc WIRELESS PCMCIA CDMA DATA MODEM QX Connection Card Online Guide 9 20 02
Contents
- 1. MANUAL
- 2. CRN 23783 Q4 Revised user manual
- 3. CRN 23783 Q4 installation instruction section
- 4. CRN 23999 Q2 revised user manual
- 5. Revised RF exposure information Oct 02
CRN 23999 Q2 revised user manual
![](/img.php?id=273192&img=bg1.png)
Section 5B
Regulatory Information
In This Section
ᮣᮣWarning (EMI) - US FCC Information
ᮣᮣWarning (EMI) - Canada
This section outlines important regulatory notices concerning your new
PCS Connection CardTM.
![](/img.php?id=273192&img=bg2.png)
Regulatory Notices
This device is compliant with Parts 15 and 24 of the FCC Rules. This PC
card has been tested with the typical laptop computer with the side loading
PCMCIA bay. This PC card must not be co-located or operated in
conjunction with any other antenna or transmitter. Use of this device in
any other configuration may exceed the FCC RF Exposure compliance
limit. Operation of this device is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesirable operations.
FCC guidelines stipulate that the antenna should be more than 2.5 cm
(1”) from by-standers and 1.0 cm (0.39”) from the user. When in use, the
antenna should be fully extended upward at a 90 degree angle.
The highest reported SAR values of the PCS Connection Card - Model
PC3200 are:
1. Separation distance of 2.5 cm (1”) to nearby persons (0.85 W/kg).
2. Direct contact to user's lap with PCS Connection Card inserted into
the top PC Card slot of the laptop computer with antenna fully
extended upward (0.17 W/kg).
FCC ID: PNF-PC3200P
CAUTION Unauthorized modifications or changes not expressly approved
by Sprint Communications Company L.P. could void compliance with
regulatory rules and thereby your authority to use this equipment.
WARNING (EMI) - United States FCC Information - This equipment has
been tested and found to comply with the limits pursuant to Part 15 & 24
of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in an appropriate installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communication. However, there is no
guarantee that interference will not occur in a particular installation.
![](/img.php?id=273192&img=bg3.png)
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
ᮣReorient or relocate the receiving antenna
ᮣIncrease the separation between the equipment and receiver
ᮣConnect the equipment into an outlet on a circuit different from that to
which the receiver is connected
ᮣConsult the dealer or an experienced radio/TV technician for help
WARNING (EMI) - Canada - This digital apparatus does not exceed the
Class B limits for radio noise emissions from digital apparatus as set out in
the interference causing equipment standard entitled "Digital
Apparatus", ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la
norme sur le matériel brouilleur: "Appareils Numériques", NMB-003
édictée par le ministre des Communications.
If you have purchased this product under a United States Government
contract, it shall be subject to restrictions as set forth in subparagraph
(c)(1)(ii) of Defense Federal Acquisitions Regulations (DFARs) Section
252.227-7013 for Department of Defense contracts, and as set forth in
Federal Acquisitions Regulations (FARs) Section 52.227-19 for civilian
agency contracts or any successor regulations. If further government
regulations apply, it is your responsibility to ensure compliance with such
regulations.