Signal Path Peachtree Audio M24 Bluetooth Speaker User Manual M24

Download:
Mirror Download [FCC.gov]
Document ID	3277376
Application ID	NquKQf2O/n+o7exqjMU4GA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	108.56kB (1357035 bits)
Date Submitted	2017-02-07 00:00:00
Date Available	2017-02-07 00:00:00
Creation Date	2017-12-21 19:20:32
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-21 19:20:32
Document Title	M24 说明书.cdr
Document Creator	CorelDRAW X7
Document Author:	user

Bluetooth Speaker
M24
ACTIVE MONITORS
USER MANUAL
M24
ACTIVE MONITORS
Contents
02 CONTENTS
03 SAFETY
04 INFORMATION
05 FRONT-AND REARPANEL
06 REMOTE CONTROL
07 CONNECTING YOUR SPEAKERS
BLUETOOTH FUNCTION
08 USB charge
09 PHONO
10 CONNECT TV,DVD,CONSOLE,PC
11 LIMITED WARRANTY
12 SPECIFICATIONS
M24
ACTIVE MONITORS
Congratulations on your new M24 ACTIVE MONITORS.
Please take a moment to read this manual.
Enjoy
Safety
Safety Instructions
●Servicing is required when the product
has been damaged.Do not attempt to
service this product yourself.Opening
or removing covers may expose you to
dangerous voltages or other hazards.
Please contact the manufacturer to be
referred to an authorized service center
near you.
Please store this instruction manual for
future reference.
●Do not use this product near water or
moisture.Clean only with a dry cloth.
Unplug this product from the wall outlet
before cleaning.
●Place the unit on a solid surface.Do not
block any ventilation openings.
●To prevent risk of fire or electric
shock,avoid over loading wall outlets,
extension cords,or integral convenience
receptacles.
●Do not put it in a closed bookcase or a
cabinet that may keep air from flowing
through its ventilation openings.
●Do not let objects or liquids enter the
product.
●Do not install near any heat sources,
such as radiators,heat registers,stoves
or other appliances that produce heat.
●Use proper power sources.Plug the
product into a proper power source,as
described in the operating instructions
or as marked on the product.
●Protect the power cord from being
walked on or pinched,particularly at
plugs and the point where they exit
from the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
M24
ACTIVE MONITORS
Information
Unpacking
These speakers were carefully tested and inspected during production and before
packaging and shipping.After unpacking please check for any damage.It is rare
that a unit is damaged during shipping,but if this does happen contact your retailer
immediately.
We recommend that you keep the original carton and packing material for future
shipping.
Recommended Speaker Setup
Correct speaker placement has a huge impact on sound quality.There are many
different theories,but all rooms and tastes are different so it's impossible to specify
a correct placement.We do suggest you experiment with a few different locations see
what is best for you.
For the best bass response on,we recommend that you keep a minimum
distance of 20-25 cm between the speakers and the rear wall.For height,position
the speakers with the tweeters at eye level of your most common listening position.
Speaker Conditioning and Break-in
Although a break-in period is not required,we recommend that you play between
24 to 48 hours of music through the speakers before doing any critical listening or
speaker placement.
Speaker Cleaning
We don't recommend using any solvents or cleaners on cabinets or speaker
driveunits.Just wipe down with a soft,dry cloth.
M24
ACTIVE MONITORS
Front-and rearpanel
10
11
1. REMOTE RECEIVE WINDOW
>Red: standby or Auto-Standby
(after 30 minutes without playing)
>Blinking RED: mute
>White:ON
>Blue: Bluetooth source is connected
>Blinking Blue: Bluetooth source is disconnected
2. Increase / Decrease Volume / input select
3. Aux in
For right / left RCA stereo plugs,
from CD / DVD / Home Theater player1．
Phono(Phono / Line)
4. Phono(Phono / Line)
5.SUB out
12
6. Power On / Off
7. Optical audio in
8. USB Audio In (for PC connection only)
9. Ground Screw Terminal
10. Portable music device charge socket
(DC 5V/1A)
11. Power supply input
12. Left speaker output
Signal output, for connecting the
left passive LN 01 speaker
M24
ACTIVE MONITORS
Remote control
10
11
Aux
Bass
Opt
USB
Flat
Treble
12
13
14
1. Standby
9. Mute button
2. Bluetooth input
10. Next track
3. Volume button
Press"+", then volume will increase;
11. Play/pause
4. Prev track
12. USB(PC Use)
5. Volume button
Press"-", then volume will decrease;
13. Digital in
Optical in
14. Treble button
6. RCA input mode
Press"-", then treble will decrease;
Press"+", then treble will increase;
7. Reset
Reset bass and treble.
8. Bass button
Press"-", then bass will decrease;
Press"+", then bass will increase;
M24
ACTIVE MONITORS
Connecting your speakers
STEP 1
Connect the RED(+) and BLACK(-) terminals from the left speaker to the corresponding
terminals on the right speaker using the included speaker cable.Insulation on cable must
be stripped on all ends.
Note:Because this system is self-powered,do not connect the speaker terminals to the
speaker outputs of a stereo receiver.
STEP 2
Connect the power cord into the left speaker and the other end into the wall outet.
Bluetooth function
Pairing Bluetooth device and M24:
If you have a Bluetooth fuction audio device, such as phone, music palyer, computer .
and connect it with M24, you should pairing them as below :
1,power on M24 and select Bluetooth on Bluetooth fuction andio device.
Waiting for a few seconds, let devices go into working condition.
2, Select Bluetooth input
option by remote control ,white indicator light will turn
on and flash . Or please make sure if Bluetooth connect with M24. And shut
off other Bluetooth device.
M24
ACTIVE MONITORS
3,Please use your Bluetooth device search new Bluetooth device ,if get “M24”,
connection it.if need pairing code, entry “1234” or “0000”.
4,If pairing successfully, white light “always on”, pairing finished .
5,The same Bluetooth device work again ,no need pairing one more time, M24
will auto connect with the device pairing last time .
Operation Bluetooth function
1,Connect your Bluetooth device as above ways.
2,Select Bluetooth input mode by remote control ,and you also can press volume
knob, and choose Bluetooth input mode .If it on Bluetooth input mode ,white light will on .
3,if your Bluetooth device support AVRCP agreement, you can use your remote
control to select “PLAY/PAUSE /PREV / NEXT”.
USB charge
M24
ACTIVE MONITORS
PHONO
Peachtree M24.
Peachtree M24.
Peachtree M24 remote.
M24
ACTIVE MONITORS
Connect TV, DVD, console, PC
AUDIO
PC AUDIO
OUT IN
CONFIGURATION A(TV,DVD,CD-RCA stereo plugs):
Connect the RCA L/R to your TV,DVD etc.and the RCA L/R to the Stereo Input on rear
panel of the M24.
Note that most newer TV remotes can control the M24 active speaker volume
if connected to variable TV audio out.
CONFIGURATION B(PC):
Connect the mini jack to your PC and the RCA L/R to the Stereo Input on rear
panel of the M24.
10
M24
ACTIVE MONITORS
Limited Warranty
Dear Customer,
This product has been designed and manufactured to the highest quality standards,however
if something goes wrong with this product,and
the country distributor warrants free replacement
parts or repair by the official distributor.
Other damages due to conditions beyond the supplier's control such as fire,rain,strode of lightning,war and other force majeure events
How to claim parts or repair under warranty:
To have your product serviced under warranty,you
must contact the dealer from where you bought the
product.
This limited warranty is valid for the original owner for a period of two years from the date of
purchase,it is not transferable.
You will need to produce this warranty booklet
completed and stamped by your dealer on the
date of purchase.Altematively,you sill need the
original sales invoice or other proof of ownership
and date of purchase.
What is covered by the limited warranty:
The limited warranty covers all production and
material defects of the product,except for the
damages stated below.
The supplier is liable only to repair or replace
defective parts of products and the supplier is
not responsible for indirect losses or damages
arising from the use of the product.
What is not covered by the limited warranty:
Damages caused by packing and transport
Transportation costs for servicing are not covered by the warranty.
Defects caused by accidents,misuse,normal
wear and tear,mis-maintenance,voltage variation and overloading.
A service repair or replacement cannot exceed
the value of the product under warranty,in no
event shall the supplier be responsible or liable
for special,incidential,consequential or indirect
damages.
Damages caused by incorrect installation or
operation Damages caused by modification
or repair by a nonauthorised service centre
and use of non-original spare parts
Date of purchase:
Dealer name and stamp:
11
M24
ACTIVE MONITORS
Specifications
Tweeter:
1 inch soft-dome
Woofer:
4 inch Aluminium cone
Nominal impedance:
4 Ohm
Sensitivity 2.83V(1W/1M): 85dB
Power Output:
40W x 2
Frequency Response:
60Hz-20KHz
Crossover System:
2-way
Amplifier Type:
Class D
Inputs:
1 x RCA&Phono, 1x Optical, 1xUSB, 1x Bluetooth
Outputs:
1xUSB(charge),1xSub Woofer
Amplifier Input Sensitivity: 480mV(Line RCA)
Frequency Range:
20Hz-20KHZ @ +/- 3dB
THD (1W@1KHz):
＜0.1%
Dimensions:
140mm x 190mm x 220mm
Net Weight:
5.7 Kg
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:54913476-a155-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:15 08:37:05Z
Create Date                     : 2017:07:15 08:37:05Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:54913476-a155-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools