Signify 324131254491X LED MODULE User Manual 2AGBW324131254491X x

Philips Lighting(China) Investment Co.,Ltd. LED MODULE 2AGBW324131254491X x

TempConfidential_2AGBW324131254491X_user manual_Rev3

Machine & Product Documentation Lighting (Product family) LED Module (Document type) PRODUCT SPECIFICATION Signature Technical Project Leader Quality Project LeaderProduct Manager (12nc) 324131254491 190-1 8 p L A4© Philips Lighting Product Sheet 190 BMS BLLL TND-410-TP-SHA Release Nr 2.0 Changing Content List Updated Date Change Request No. Remarks 2016/09/12 Initial version The LED module is a general purpose Zigbee certified building block for SMART TLED lighting applications e.g. SMART TLED and luminaires. It does not work stand-alone but is meant to be connected by socket on a application specific motherboard that contains the proper interfacing for stand-alone usage (i.e. connectors, supply voltage, ...)
Machine & Product Documentation Lighting (Product family) LED Module (Document type) PRODUCT SPECIFICATION Signature Technical Project Leader Quality Project LeaderProduct Manager (12nc) 324131254491 190-2 8 p L A4© Philips Lighting Product Sheet 190 BMS BLLL TND-410-TP-SHA Release Nr 2.0 1. Module layout and drawings Name Value Tolerance Remarks Width (mm) 20.8 ±0.2 Length (mm) 45 ±0.2 Height (mm) 12 ±1 Drawings:
Machine & Product Documentation Lighting (Product family) LED Module (Document type) PRODUCT SPECIFICATION Signature Technical Project Leader Quality Project LeaderProduct Manager (12nc) 324131254491 190-3 8 p L A4© Philips Lighting Product Sheet 190 BMS BLLL TND-410-TP-SHA Release Nr 2.0 I/O definition: Pad Number Function 1 PWM PWM output 2 5V DC input 3 GND Ground 4 GND Ground 5 NTC NTC input 6 ON/OFF ON/OFF output 7 V_LED V_LED input 8 Relay_ON_OFF Relay control output 9 I_LED I_LED output 10 V_CTRL V_CTRL output
Machine & Product Documentation Lighting (Product family) LED Module (Document type) PRODUCT SPECIFICATION Signature Technical Project Leader Quality Project LeaderProduct Manager (12nc) 324131254491 190-4 8 p L A4© Philips Lighting Product Sheet 190 BMS BLLL TND-410-TP-SHA Release Nr 2.0 2. ELECTRICL SPECIFICATION Name Value Tolerance Remarks Vcc voltage (V) 5V ±5% Current (normal, mA) 35 3. RF PERFORMANCE SPECIFICATION Item Conditions Spec Min Typical Max Frequency tolerances (ppm) Continuous single tone +/-40 Output power (dBm) Measured at antenna feed point 4 Spurious emissions* (dBm) 30 – 1000MHz -36 1 – 12.75GHz -30 1.8 – 1.9GHz -47 5.15 – 5.3GHz -47 EVM (%rms) <10 Receiver Sensitivity (dBm) PER < 1% -99 TRP when connected to motherboard (i.e. SMART TLED) -2dBm 4. Approbation PMN(product marketing name): SMART RF Module
Machine & Product Documentation Lighting (Product family) LED Module (Document type) PRODUCT SPECIFICATION Signature Technical Project Leader Quality Project LeaderProduct Manager (12nc) 324131254491 190-5 8 p L A4© Philips Lighting Product Sheet 190 BMS BLLL TND-410-TP-SHA Release Nr 2.0 FCC Labelling Requirements When integrating HUE Engine V1.0 into a product it must be ensured that the FCC labelling requirements are met. This includes a clearly visible label on the outside of the finished product specifying the FCC identifier (FCCID:2AGBW324131254491X). This exterior label can use wording such as “Contains Transmitter Module FCC ID:2AGBW324131254491X” although any similar wording that expresses the same meaning may be used. Note: Changes or modifications made to this device that are not expressly approved by Philips Lighting North America Corporation(“Philips”) may void the user's authority to operate the device. The advance interface module complies with FCC radiation exposure limits set forth for an uncontrolled environment. The module and associated antenna must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter. FCC Approvals FCC statement:
Machine & Product Documentation Lighting (Product family) LED Module (Document type) PRODUCT SPECIFICATION Signature Technical Project Leader Quality Project LeaderProduct Manager (12nc) 324131254491 190-6 8 p L A4© Philips Lighting Product Sheet 190 BMS BLLL TND-410-TP-SHA Release Nr 2.0 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC notice: This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the device and receiver Connect the device into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/television technician for help . IC (Industry Canada) Approvals This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and
Machine & Product Documentation Lighting (Product family) LED Module (Document type) PRODUCT SPECIFICATION Signature Technical Project Leader Quality Project LeaderProduct Manager (12nc) 324131254491 190-7 8 p L A4© Philips Lighting Product Sheet 190 BMS BLLL TND-410-TP-SHA Release Nr 2.0 its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication This module complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. To maintain compliance, this module must not be co-located or operating in conjunction with any other antenna or transmitter Immediately following the above notice, the manufacturer shall provide a list of all antenna types approved for use with the transmitter, indicating the maximum permissible antenna gain (in dBi) and required impedance for each. The labelling requirements for Industry Canada are similar to those of the FCC. Again a clearly visibly label must be placed on the outside of the finished product stating something like “Contains Transmitter Module, IC-ID: 20812-4491X”, although any similar wording that expresses the same meaning may be used. En vertu de la réglementation d’Industrie Canada, cet émetteur radio risquera uniquement à l’aide d’une antenne de type et de gain maximum (ou moins) pour l’émetteur a approuvé par Industrie Canada. Pour réduire les interférences radio potentielles à d’autres utilisateurs, le type d’antenne et son gain doivent être choisies que la puissance isotrope rayonnée équivalente (p.i.r.e.) n’est pas plus que celle autorisée pour une communication réussie Ce module est conforme à la FCC et Industrie Canada RF limites d’exposition aux rayonnements définies pour l’ensemble de la population. Pour maintenir la conformité, ce module ne doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou émetteur À la suite de l’avis ci-dessus, le fabricant doit fournir une liste de tous les types d’antenne approuvés pour une utilisation avec l’émetteur, indiquant au maximum gain d’antenne (en dBi) et impédance requise pour chacun.
Machine & Product Documentation Lighting (Product family) LED Module (Document type) PRODUCT SPECIFICATION Signature Technical Project Leader Quality Project LeaderProduct Manager (12nc) 324131254491 190-8 8 p L A4© Philips Lighting Product Sheet 190 BMS BLLL TND-410-TP-SHA Release Nr 2.0 Les exigences d’étiquetage pour Industrie Canada sont semblables à celles de la FCC. Encore une fois un clairement visiblement étiquette doit être placée à l’extérieur du produit fini indiquant quelque chose comme "Module émetteur de Contains, IC ID: 20812-2630 X", bien que tout même libellé qui exprime que le même sens peuvent être utilisé. IC notice: This Class B complies with Canadian ICES-005.--- Cet appareil numérique de la classe B est conforme à la norme NMB 005 du Canada

Navigation menu