Silex Technology SDMAN2 Wireless LAN SDIO module User Manual Users manual

Silex Technology, Inc. Wireless LAN SDIO module Users manual

Contents

Users manual

Download: Silex Technology SDMAN2 Wireless LAN SDIO module User Manual Users manual
Mirror Download [FCC.gov]Silex Technology SDMAN2 Wireless LAN SDIO module User Manual Users manual
Document ID2973999
Application IDWmKKvgaGqqxx9tDEfNun5w==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize13.25kB (165624 bits)
Date Submitted2016-04-28 00:00:00
Date Available2016-04-28 00:00:00
Creation Date2016-04-26 09:33:35
Producing SoftwareAcrobat Distiller 10.1.2 (Windows)
Document Lastmod2016-04-26 09:33:35
Document TitleUsers manual
Document CreatorPScript5.dll Version 5.2.2

User Manual
Since this module is not sold to general end users directly, there is no user manual of
module.
For the details about this module, please refer to the specification sheet of module.
This module should be installed in the host device according to the interface specification
(installation procedure).
For OEM
Antenna Type
Model
Antenna Gain
Note
2.4GHz
5GHz
H2B1PC1A1C
1.8dBi
3.9dBi
For WLAN and Bluetooth
H2U84W1H1S
1.4dBi
2.3dBi
For WLAN and Bluetooth
ANTDC-081A0
2.0dBi
2.1dBi
For WLAN
1000418
2.5dBi
3.5dBi
For WLAN
External printed PCB antenna
:Unictron
On board chip antenna
:Unictron
Sleeve antenna
: SANSEI
Embedded Antenna
: Ethertronics
The following information must be indicated on the host device of this module;
[for FCC]
Contains Transmitter Module FCC ID: N6C-SDMAN2
or
Contains FCC ID: N6C-SDMAN2
[for IC]
Contains Transmitter Module IC: 4908A-SDMAN2
or
Contains IC: 4908A-SDMAN2
[for FCC and IC]
This device complies with Part 15 of FCC Rules and Industry Canada’s
licence-exempt RSSs. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes
des CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
*If it is difficult to describe this statement on the host product due to the size, please describe in
the User's manual.
The following statements must be described on the user manual of the host device of this
module;
[for FCC]
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
[for IC]
5150-5250MHz and 5250-5350MHz bands are restricted to indoor operations only.
La bandes 5150-5250MHz et 5250-5350MHz ont restreints à une utilisation à
l’intérieur seulement.
High-power radars are allocated as primary users (i.e. priority users) of the bands
5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
Les radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils
ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
[for FCC and IC]
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20cm or
more away from person’s body.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles les radioélectriques (RF)
de la FCC lignes directrices d'exposition et d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en
gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2016:04:26 09:33:35+09:00
Modify Date                     : 2016:04:26 09:33:35+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.2 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:f67ece71-858e-4b29-8d1a-07553b8b5a5c
Instance ID                     : uuid:8b4453b9-3f2c-4e79-8bd3-6cbea68d518c
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: N6C-SDMAN2

Navigation menu