Silverlit Toys TX00024G-1107 Remote Controlled Toy User Manual 86027 EN 6L r03
Silverlit Toys Manufactory Ltd. Remote Controlled Toy 86027 EN 6L r03
Manual
EI-3754
Instruction Manual
Delivery contents
Silverlit SAS, Espace Green Parc, Route de Villepecle, 91280 Saint Pierre du Perray / France.
©
2011 Silverlit. All rights reserved.
Safety precautions
- Parents: Please read the operating instructions carefully with your children prior to the first use.
- Stop the vehicle through the transmitter before picking it up.
- Keep hands, hair and loose clothing away from the moving parts, e.g. tires and the wheel hubs, when toy is switched on.
- Do not operate the remote controlled vehicle on streets. Avoid hitting people, pets or home furnishings.
Part Identification
ENGLISHENGLISH
ENGLISH
1
ENGLISH
4
2 3
Throttle
Driving Tips:
Troubleshooting
Symptom Cause Solution
Driving the remote controlled vehicle
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1)This device may not cause harmful interference, and
2)This device must accept any interference received, including interference that may cause undesired operation.
FCC Statements
Battery requirement for (Vehicle):
Power Supply :
Rating : DC 6 V , 7,8 W
Batteries : 4 x 1,5 V “AA”/LR6/AM3 (included)
Capacity : 2800 mAh
Set vehicle power switch to “ON”.
For details, please refer to the instruction in the App.
Notes:
- Parental guidance is recommended when installing or replacing
batteries.
- Keep this instruction manual for future reference.
- Users should keep strict accordance with the instruction manual while
operation the product.
- Under the environment with electrostatic discharge, the toy may
malfunction and require user to reset the toy.
- Use new alkaline batteries in this toy to obtain best performance.
Care and Maintenance:
- Always remove batteries from the toy when it is not being used for a long period of time.
- Wipe the toy gently with a clean cloth.
- Keep the toy away from direct heat.
- Do not submerge the toy into water that can damage the electronic assemblies.
Warning: Conversion or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the
product.
Battery warnings:
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed before being recharged.
- Rechargeable batteries are only to be charged under adult supervision.
- Different types of batteries or new and used batteries are not to be mixed.
- Only batteries of the same or equivalent type as recommended are to be used.
- Batteries are to be inserted with correct polarity.
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short-circuited.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
WARNING:
CHOKING HAZARD
-
Small Parts.
Not for children under 3 years.
The crossed-out dustbin symbol indicates that batteries,
rechargeable batteries, button cells, battery packs, etc. must
not be put in the household waste. Batteries are harmful to
health and the environment. Please help to protect the
environment from health risks. Tell your children to dispose of
batteries properly by taking them to the local collecting points.
This way batteries are recycled safely.
Waste Electrical and Electronic Equipment
(WEEE)
When this appliance is out of use, please remove all batteries and
dispose of them separately. Bring electrical appliances to the local
collecting points for waste electrical and electronic equipment. Other
components can be disposed of in domestic refuse.
For Ages 8+
Ab 8 Jahre
Pour 8 ans et plus
Voor leeftijd 8+
Para 8+ años
Dai 8 anni in su
This product is in
compliance with the
essential requirements
and other relevant
provisions of Directive
1999/5/EC.
1. Only operate the vehicle on flat, smooth (but not slippery) and dry surfaces or low pile carpets. Hair,
carpet or dirt can affect the operation of the vehicle.
2. Do not drive the vehicle on sand or through water or snow. If your vehicle gets wet, wipe it with a towel
and allow it to dry completely.
3. Do not operate near concrete walls which may disturb bluetooth transmission.
- The vehicle has a transmission range of 5 meters
(65 feet) in open space.
- Avoid these if possible, or choose another place to
operate the vehicle.
- Switch off the toy and turn it on again.
- Power switch is not in “ON” position.
- Batteries are not installed correctly.
- Weak batteries.
- Hair, carpet or dirt might be trapped between
wheels.
- Out of the transmission range.
- High-frequency interference occurred near to
high-voltage lines, transformers and some
types of building.
- iPhone / iPod Touch / iPad batteries are weak.
- The toy is in stand-by mode
- Switch on the power.
- Check the batteries polarity and connection.
- Replace them with new ones.
- Carefully remove the foreign materials.
Vehicle runs slowly,
erratically or does not run..
Vehicle does not react, or react
poorly to the iPhone / iPod
Touch / iPad.
Loss of control.
Batteries
- The vehicle is powered by 4 x 1.5V “AA” size batteries.
Battery Installation: Vehicle
Getting Started
Make sure the power switch is on “OFF” position.
1. Press down the button (1) on battery compartment cover, and then follow the arrow (2) direction to push
out the battery compartment cover (fig. 1).
2. Insert four “AA” batteries with correct polarity, as shown inside battery compartment (fig. 2).
3. Close the battery compartment cover.
TIPS
For the vehicle, best & maximum
performance can be only
obtained by new and alkaline
batteries.
- 1:16 Enzo Ferrari Vehicle
- 4 x “AA” size alkaline batteries
- Instructions manual
1:16 Enzo Ferrari
Operation step
"Produced under license of Ferrari Spa. FERRARI, the PRANCING HORSE device, all associated logos and distinctive designs are property of Ferrari
Spa. The body designs of the Ferrari cars are protected as Ferrari property under design, trademark and trade dress regulations"
fig. 2
1
2
fig. 1
Power switch
Battery
Compartment
Cover
(Vehicle)
OFF ON
Joystick Mode
Gesture Mode
Back
Head Light
Head Light
Signal Light Stop
Trimmer
Band Indicator
Option
Signal Turn Light
(Left)
Signal Turn Light
(Left)
Back
Idle
Position
Horn
Option
Head Light HornDirection
Stick
(iPod touch / iPhone Not include)
Go App Store Click “Go”
Search
“Silverlit Bluetooth RC”
down load & install
Turn on
the vehicle
Go into
app interface
1:16 Series