Simtoo Intelligent Technology DF280 FPV Racing Drone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3411372
Application ID	tNEZ1uiSvsPzmxyXX2cOXg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	53.79kB (672331 bits)
Date Submitted	2017-06-02 00:00:00
Date Available	2017-06-02 00:00:00
Creation Date	2017-05-19 17:16:55
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2017-05-24 21:47:37
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	lenovo

Change a New View of Your World
USER MANUAL
Shenzhen Simtoo IntelligentTechnology CO.,L TD.
West Industry Building A5,Park R oad,Bao An District,S henzhen ,C hina 518000
+86 755 2373 2452
www.simtoo.c om
PRECAUTIONS
1.Always race the drone in open wide area free of obstacles and people as it can be
extremely fast and comes into collision if not manipulated properly.
2.Keep your body parts away from the rotating propellers.
3.Do note expose the drone to water, which may damage the electronic components.
4.The drone is controlled by a radio signal which may be interfered by a variety of
outside sources. The interference can cause loss of control so it’s necessary to
keep a safe distance from objects and people in all directions around your model
as this will help to avoid collisions or injury.
CHARGING TIPS
Charge the battery away from flammable materials.
Never leave the battery unattended when it is being charged.
After flying, the battery must be cooled to room temperature before charging.
ASSEMBLY
1.Install the antenna with the wrench. Do not get the drone power on without the
antenna as this may damage the video transmitter circuitry.
2.Insert the Li-po battery under the airframe and secure it with the strap.
Connect the battery cable with the drone PCB power plug.
3.After connecting the battery, turn on the transmitter and a series of beep will be
heard indicating that the drone is ready to arm. Place the drone on a level surface
and arm the motors by moving the throttle stick to the bottom right corner and hold
until a series of beeps is heard. Check if the motors are rotating properly.
4.To disarm the motor, push the throttle stick to the bottom left corner and hold until
two short beeps are heard.
5.Release the propeller nut and attach the propellers onto the motors. Secure the
ASSEMBLY
propellers nut with L-shape hex drive. The R designated propellers must be
attached on the black nut motors and P designated propellers must be attached on
the silver nut motors. The propeller must be placed with the lettered side up.
P Propellers
Silver Nut
R Propellers
Black Nut
P Propellers
Silver Nut
R Propellers
Black Nut
6.Turn on the FPV goggles by pressing the power button and the drone’s
video transmitter will connect to the goggles automatically.
LAUNCH
1.After connecting the battery, turn on the transmitter and a series of beep will be
heard indicating that the drone is ready to arm. Place the drone on a level surface
and arm the motors by moving both the two sticks down and in and hold until a
series of beeps is heard. Check if the motors are rotating properly.
2.To disarm the motor, push the throttle stick to the bottom left corner
and hold until two short beeps are heard.
3.After arming the motors, pull up the left stick slowly to take it off.
5.8G WIRELESS CAMERA
5.8G wireless camera modulates the video signal on a sine wave and sends it to
the mobile device via wireless way.
1.Support touch switch and PWM/Touch switch select channel
2.Support touch switch select frequency group
3.Support NTSC/PAL switch , support vertical inverted image and horizontal mirror
image switch
4.Support TX RE output power enable/disable
5.Support MIC output enable/disable
6.Miniature digital tube display alternately channel and status information
APPENDIX A
Binding
1.Press and hold the binding key
2.Connect to battery, binding when slow red flashing.
3.Loose the match code key.
Remote control
1.Press BIND button to bind.
2.Press the power Switch button to connect battery.when the light on receiver turn
to normally on means matching code succeed.
APPENDIX B
Joystick Calibrating
1.Press the second(left hand mode) button
2.Press power switch, when the indicator light slow blue flashing twice and turn to
fast, please pull the left and right joysticks to 4 diagonal directions to the end, and
repeat this action 4 times at least.
Push the throttle stick into the middle of the scale, and the blue light flash once again,
turn to solid .
3.After finish, joystick can be operated.
1RWHV 7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD
&ODVV%GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH)&&5XOHV7KHVHOLPLWV
DUHGHVLJQHGWRSURYLGHUHDVRQDEOHSURWHFWLRQDJDLQVWKDUPIXO
LQWHUIHUHQFHLQDUHVLGHQWLDOLQVWDOODWLRQ7KLVHTXLSPHQWJHQHUDWHVXVHV
DQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRWLQVWDOOHGDQGXVHGLQ
DFFRUGDQFHZLWKWKHLQVWUXFWLRQVPD\FDXVHKDUPIXOLQWHUIHUHQFHWRUDGLR FRPPXQLFDWLRQV
+RZHYHUWKHUHLVQRJXDUDQWHHWKDWLQWHUIHUHQFHZLOOQRWRFFXULQD
SDUWLFXODULQVWDOODWLRQ,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFH
WRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKH
HTXLSPHQWRIIDQGRQWKHXVHULVHQFRXUDJHGWRWU\WRFRUUHFWWKH LQWHUIHUHQFHE\RQHRUPRUHRIWKHIROORZLQJPHDVXUHV
5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD,QFUHDVHWKHVHSDUDWLRQ EHWZHHQWKHHTXLSPHQWDQGUHFHLYHU
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWR ZKLFKWKHUHFHLYHULVFRQQHFWHG
&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
7KHGHYLFHKDVEHHQHYDOXDWHGWRPHHWJHQHUDO5)H[SRVXUHUHTXLUHPHQW
7KHGHYLFHFDQEHXVHGLQSRUWDEOHH[SRVXUHFRQGLWLRQZLWKRXWUHVWULFWLRQ
7KLVGHYLFHDQGLWVDQWHQQD V PXVWQRWEHFRORFDWHGRURSHUDWLRQLQ FRQMXQFWLRQZLWKDQ\RWKHUDQWHQQDRUWUDQVPLWWHU

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : lenovo
Create Date                     : 2017:05:19 17:16:55+08:00
Modify Date                     : 2017:05:24 21:47:37+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:05:24 21:47:37+08:00
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D20B4A9D4BDBBFACBB5C3F7CAE95FA3A8CEDED2A3BFD8A3A9>
Creator                         : lenovo
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:3438e41d-ea6b-47ce-8a03-4f1834d9d4c7
Instance ID                     : uuid:bc024a21-dc99-4af8-88e0-2a966abc5742
Page Count                      : 6

EXIF Metadata provided by EXIF.tools