Simtoo Intelligent Technology XT200 Moment Airselfie Drone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3411204
Application ID	1PFQ5HYq+lOvfzqngiQXKA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.74kB (596688 bits)
Date Submitted	2017-06-01 00:00:00
Date Available	2017-06-01 00:00:00
Creation Date	2017-05-27 18:57:35
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2017-05-27 19:00:06
Document Title	Microsoft Word - Moment Airselfie Drone User Manual20170519
Document Creator	PScript5.dll Version 5.2.2
Document Author:	lenovo

XT200 Self‐timer User Manual
Moment Airselfie Drone User Manual
Safe Flying Tips
1. There are two types of drone , with GPS and without GPS. Fly in an open wide area without
large obstacles like buildings, trees or electric wires in 30 meters as they may distort the GPS
signals or crash the aircraft. Do not fly close to metal structure with strong magnetic field.
2. Place the aircraft on flat place or on your palm before take‐off. Press power button to
turnbattery on.
3. Do not fly in strong winds, rains, lighting, snow or fog. Bad weather may weaken the GPS
signals or even damage the drone. Do not fly in water area as drone is not waterproof.
4. Itis recommended to keep the flight height and range within 100m . Do not fly across large
obstacles. Always keep drone within the visual line of sight.
5. If drone suddenly deviates or keeps ascending over 6 meters due to surrounding interference.
Press the “hover” button and “land” button immediately to force drone to land.
6. Ensure all components are in well condition and fully charged before every fly.
Product profile
Introduction
XT200 is composed of the aircraftand XT200 APP. The flight control system is
integrated in the aircraft fuselage, the integrated head is located in the lower part of
the fuselage. User must install XT200 APP on mobile device to control the camera.
High‐definition image transmission system integrated in the fuselage for
high‐definition images and video transmission.
Box Content
XT200 Seelf‐timer Use
er Manual
Airccraft x1
Batteryy x1
Useer Manuall x1
USB Caable x1
Harrdshell Case
Carr charger x1
x1
Disclaimer x1
Adapteer x1
airrcraft
Op
peration
n Interfaace Funcctional Icons
Preparing the
XT200 Self‐timer User Manual
Flight Environment Requirements
Indoor
1. Fly indoor will depend on Light Stream Positioning and Ultrasonic positioning
technology, they area below the drone should textured which cannot be too sparse
or too close.
2. Please fly under condition of adequate light (Illumination >15 lux), avoid to fly on
strong specular reflective ground.
3. Do not fly above the materials which are absorptive for Ultrasound, like blankets
and other wool.
Outdoor
1. Please don’t fly outdoor in bad weather like heavy rain and snow.
2. Avoid flying around the building and keep far away from high buildings which will
block the GPS signal, some building with metals reinforcements will also impact the
compass guidance.
3. Please keep the drone within your visual range, away from obstructions, high
voltage wires, trees, crowd and water.
Magnetic compass calibration and
Accelerometer calibration
1. Recommending to calibrate the magnetic compass for the first use, otherwise the
system may not work properly, and affecting safety flight.
2. Magnetic compass is susceptible to get interference from other electronic devices,
which will result in data anomalies and even flight accidents.
3. Do not calibrate the magnetic compass in the environment of strong magnetic
interference or near to large metal objects.
4. When calibrating, unfold the aircraft to avoid interference.
5. Please calibrate the magnetic compass in the environment of magnetic
XT200 Self‐timer User Manual
interference or near to large metal objects.
6. The flight location is far away from last flight location.
7. The aircraft drifted heavily, for example, unable fly in a straight line.
8. User can calibrate by following the instructions in APP, click the Settings then
Magnetic Compass Calibrate.
9. After finish Magnetic Compass Calibrate, click Setting and accelerometer
calibration.
Preparing For Flight
Download APP
Before use, please download and install the “XT200” first. Scan the QR code on
package for WeChat Public Account download, or search and download “XT200”
from APP Store and or Android APP market.
Check battery power
Take out the battery and keep pressing the Power on button, if the indicator light
keeps lighting then means it still has the power to be used, if the light keep
blinking then means low battery and please charge for it.
Charging
There are three methods to charge.
First method: Plug the battery to charge, connect the charge and power adapter
via charging cable, then connect the power adapter with your power supply.
Second method: Plug the battery to charge, connect the charge and other 5V
output power supply devices like power bank via USB port of charging cable.
XT200 Self‐timer User Manual
Third methods : charging with the special charger in car .The Red indicator light
will keep lighting when charge, and the light will be off after charging finished.
Charging Time:：50 minutes
Usage Time：15 minutes
Ready to fly
Install the battery to drone and unfold the drone, then put the drone on a right
horizontal place. Hold the power on button for 3 seconds, loose your hand when
the light on the head of drone activated. Please do not touch or move the drone
now. A few seconds later, the ESC start and prompt with beeping noise.
Turn off: Keep pressing the power button until light off.
Press and hold power button for 3 seconds, then connect your mobile device to
camera wifi.
Connecting the drone with APP
Turn on the drone, search and connect for “XT200_xxxxxx” on your Mobile device
WiFi channel, (password: 1234567890), then start the APP.
XT200 Self‐timer User Manual
Notes ：XT200 APP requires android 5.0 or later and IOS 8.0 or later.
Operating instructions
Ensure understand the operation interface and functions before flying drone.
(Keep pressing the “unlock” icon for 3‐5 seconds for unlocking the APP)
One key fly Click the take off button and ensure, then the drone will fly to
1.5 meters height.
One key landing
Click the landing button and ensure, drone will auto
land.
One key back Click the return home button and ensure, drone will return back to
the take‐off point and land.
Visual follow
Select and confirm the target on APP screen, the drone will fly
automatically follow the target.
Camera controlClick the camera icon to popup the slider, the camera angle will
change according to your sliding.
Display joystick Show / Hide flight joystick.
Taking photo
Photo Album
Photo/video mode switch
XT200 Seelf‐timer Use
er Manual
Seetting Interfaace
Settingg Setting meenu
Joyystick settting Switchh the American and Japannese control mode
Sen
nsitivity setting
Deefaults value 1m/s
andcan not be changged by indoor mode
caalibration
n Magnetic compass
and accelermete
er calibration . Please calib
brate before your
fist flight
Cam
mera setttingPhoto and video
Am
mericaan conttrol mo
ode
Japanese conttrol mo
ode
hotography and
a vid
deo
Ph
XT200 Self‐timer User Manual
Photograph
Single shot mode: each shot takes one photo
Continuous shooting mode: 3/5/10 photos continuous shooting available. You can
Continuous shooting in camera setting, and review or delete or share photos in
album.
Video
Press the video button, the button turns purple and video recording start, press
button again and it turns blue then recording stop.
Failsafe
When the battery is low, the drone will emit audible alarm with the red LEDs flashing
and autonomously land at its current spot. The control distance of mobile device is
100 meters. If the drone flies out of the range and loss connection, it will
autonomously hover and return home.
When lose communication ,the drone which with GPS will automatically return.
RF Exposure: A distance of 20 cm shall be maintained between the antenna and users, and the
transmitter may not be co-located with any other transmitter or antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : lenovo
Create Date                     : 2017:05:27 18:57:35+08:00
Modify Date                     : 2017:05:27 19:00:06+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : lenovo
Title                           : Microsoft Word - Moment Airselfie Drone User Manual20170519
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:05:27 19:00:06+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:edbb2bf8-e016-49df-b34b-e9ae9e310973
Instance ID                     : uuid:e6817037-5b9c-48c1-b70e-e0a75e6b4da3
Page Count                      : 9

EXIF Metadata provided by EXIF.tools