Sirius XM Radio GEXAWARE1 Low Power Transmitter User Manual user gd engfinl6 r3
Sirius XM Radio Inc. Low Power Transmitter user gd engfinl6 r3
users manual
Warning: This manual contains important safety and operating information. Please read and follow
the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage
to your AirWare receiver, accessories, and/or to your vehicle or other property.
Satellite Radio Receiver – User Guide
GEX-AIRWARE1
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 1
Information to User
Alteration or modifications carried out without appropriate
authorization may invalidate the user’s right to operate the
equipment.
WARNING
Handling the cord on this product or cords associated with
accessories sold with the product will expose you to lead, a
chemical known to the State of California and other govern-
mental entities to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
CAUTION
• Do not allow this unit to come into contact with liquids.
Electrical shock could result. Also, damage, smoke, and
overheating could result from contact with liquids.
• Keep this manual handy as a reference for operating
procedures and precautions.
• Always keep the volume low enough so that you can hear
emergency vehicles and other outside or surrounding
sounds, and never use headphones while driving.
• Do not operate this unit while driving or performing other
tasks if doing so will divert your attention from the safe
operation of your vehicle or the safe performance of
another task that you are performing. Failure to do so
could result in injury and/or damage. Always observe safe
driving rules and follow all existing traffic regulations.
• Protect this product from moisture.
• If the battery is disconnected or has discharged, the preset
memory will be erased and must be reprogrammed.
• Avoid high volume levels to prevent hearing damage.
Important (Serial Number)
The serial number of this device is located on the back of
this unit. For your own security and convenience, be sure to
record this number on the enclosed warranty card.
Warning: AirWare should be placed in your vehicle
where it will not interfere with the function of safety
features, e.g., deployment of airbags. Failure to correctly
place AirWare may result in injury to you or others if the
unit becomes detached during an accident and/or
obstructs the deployment of an airbag.
After-sales service for Pioneer products
Please contact the dealer or distributor from where you purchased
the product for its after-sales service (including warranty condi-
tions) or any other information. In case the necessary information
is not available, please contact the companies listed below:
Please do not ship your product to the companies at the address-
es listed below for repair without making advance contact.
U.S.A.
PIONEER ELECTRONICS (USA) INC.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90810
800-421-1404
For warranty information, please see the Limited Warranty
sheet included with your product.
Product registration
Visit us at the following site:
1. Register your product. We will keep the details of your
purchase on file to help you refer to this information in the
event of an insurance claim such as loss or theft.
2. Receive updates on the latest products and technologies.
3. Download owner’s manuals, order product catalogues,
research new products, and much more.
Use of XM Content
Please refer to XM Satellite Radio for any restrictions regarding
your use of XM content when you subscribe to the XM service.
You may use this unit only to copy content for which you have
obtained permission to copy such content (or own such content
or otherwise have a legal right to copy such content). Failure to
do so could be a violation of law and may subject you to
payment of damages and other remedies.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH THIS
PRODUCT WILL INCREASE EYE HAZARD.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 2
Table of Contents
A Brief History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About XM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Let’s Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Main controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
On the flip side . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
What’s in the box? . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting to a stereo . . . . . . . . . . . . . . . . . . . . . 15
Receiving the XM signal . . . . . . . . . . . . . . . . . . . . 15
Activating Your AirWare®. . . . . . . . . . . . . . . . . . . . . . . . . 16
Go Ahead! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Listening To XM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Changing channels . . . . . . . . . . . . . . . . . . . . . . . . 17
Saving favorite channels into presets. . . . . . . . . . . 18
Storing song information in memory. . . . . . . . . . . 19
TuneSelect™: Always find your favorite songs or
artists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
My XM Time-shifting Memory Mode. . . . . . . . . . . . . 20
2go: Store and play back . . . . . . . . . . . . . . . . . . . 20
Scheduling a session . . . . . . . . . . . . . . . . . . . . . . . 21
Personalizing Your AirWare. . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting audio. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Changing display information . . . . . . . . . . . . . . . . 23
Make any FM radio an XM radio. . . . . . . . . . . . . . 25
Stock Ticker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Info Extras. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Direct Tune: Select channels faster . . . . . . . . . . . . 27
Setting time features. . . . . . . . . . . . . . . . . . . . . . . 27
Skipping channels . . . . . . . . . . . . . . . . . . . . . . . . . 28
Returning to factory defaults. . . . . . . . . . . . . . . . . 28
Using AirWare At Home . . . . . . . . . . . . . . . . . . . . . . . . . 29
Aiming the home antenna . . . . . . . . . . . . . . . . . . 30
Using AirWare In Your Vehicle . . . . . . . . . . . . . . . . . . . . 31
Audio quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Placing the antenna . . . . . . . . . . . . . . . . . . . . . . . 33
Mounting your AirWare on the dash . . . . . . . . . . . . . 34
Using AirWare On The Go . . . . . . . . . . . . . . . . . . . . . . . 35
Signal reception guidelines . . . . . . . . . . . . . . . . . . 36
Other Things You Should Know. . . . . . . . . . . . . . . . . 37
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Important battery information—please read . . . . . 37
Accessories (sold separately) . . . . . . . . . . . . . . . . . 38
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 4
6 7
About XM
One big idea can change everything. And XM Satellite Radio
is one big idea: Radio to the Power of X®. America’s most
popular satellite radio service offers digital channels of sheer
variety: music, sports, talk, comedy, drama, news, traffic and
weather, kids programming, and more. All XM original
programming music channels are 100 percent commercial-
free, and XM’s instant traffic and weather channels provide
the most comprehensive, in-depth information on traffic
incidents, delays, and road conditions available on radio.
These services are available for a low monthly subscription,
and additional devices may qualify for a reduced subscription
fee through the XM Family Plan.*
*XM subscription required for reception of XM service. Not
available in Alaska or Hawaii. Satellite radio reception depends
on the ability of the antenna to receive/record a signal. The
signal may not be available in buildings or if obstructed (e.g.,
A Brief History
Ever since XM Satellite Radio signed up its first subscriber
in 2001, Pioneer and XM have been working constantly
to create better satellite radio receivers. We imagined
a radio that works not only in a vehicle, a home, or an
office, but something you can take with you virtually
anywhere you go. Now we have it: introducing AirWare®,
a “go anywhere” truly portable satellite radio receiver.
With your AirWare, you can:
• listen to live XM programming at home, in your car, in your
office and now virtually anywhere outdoors (page 17). XM
subscription required*.
• use the exclusive satellite radio memory mode feature
“MY XM” to easily save up to five hours of the most
current XM programming for listening at another time or
where live signal reception may be limited (page 20).
• program your AirWare to store fresh XM programming at a
specific time every day (page 21), and personalize it to suit
your lifestyle (page 22).
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 6
89
Let’s Get Started
First, some important reminders
We know you’re eager to turn on your brand new AirWare
and listen to XM. Please take a moment to remember
the following:
Warning: This manual contains important safety
and operating information. Please read, and follow the
instructions in this manual. Failure to do so could result in
personal injury, death, and/or damage to your AirWare
receiver, accessories, and/or to your vehicle
or other property.
Caution: Use your AirWare only with the enclosed
components or approved accessories. Do not modify
wires or other connections in any way; you could cause
a malfunction, which could damage your AirWare and will
void your warranty.
Controls
Before you begin, take a moment to familiarize yourself
with your AirWare’s controls. Most basic functions can be
accessed using the front panel buttons and the dial.
More advanced features are accessed using the “menu”
button and the dial.
MAIN CONTROLS
display – backlit high-
resolution LCD display
2go button – store up to five
hours of XM programming
using the “MY XM” Time-shifting
Memory Mode
arrow buttons – cycle
through channel categories
(“LIVE”); skip to previous
or next song (“MY XM”)
mode button – switch
between “LIVE” XM and
“MY XM” Time-shifting
Memory Mode
preset/direct button – select
between direct channel entry or
up to 30 presets
number keys – enter a channel
directly or select your favorite presets
Warning: If you use your AirWare in a moving vehicle
or watercraft, keep your eyes on the road or water, and
hands on the wheel or controls. Not doing so could
result in personal injury, death, and/or damage to your
AirWare receiver, accessories, and/or to your vehicle or other
property.
Caution: Your AirWare is not waterproof. Avoid splashing it
with liquids and never submerge it.
We’re always concerned for your safety and want you to
have the best AirWare experience possible!
power button – press and hold to turn your AirWare on and off
dial – rotate to highlight a channel or menu option; push in to
make selection, or press and hold for TuneSelect™
volume button – raise or lower volume only when headphones
are plugged in
menu button – access advanced features and configuration options
memory button – save and recall song information such as artist
and song title
mute/pause/lock button – press once to mute audio (“LIVE”) or
pause playback (“MY XM”); press and hold to lock or unlock your
AirWare controls
display button – change the appearance of the display, including
access to different modes that display stocks or sports scores
IR lens – aim
your remote
control here
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 8
REMOTE CONTROL
search button – search by scanning
presets or by scanning all channels
2go button – store up to five
hours of XM programming
using the “MY XM” Time-
shifting Memory Mode
jump button – switch to
previous channel
arrow buttons – view
channel categories (“LIVE”);
skip to previous or next
song (“MY XM”)
preset/direct
button – switch between direct
channel entry or up to 30 presets
display button – change the
appearance of the display,
including access to different
modes that display stock quotes
and Info Extras such as sports scores
DISPLAY SCREEN
lock indicator
channel selection
mode – direct
entry or preset
banks A, B, or C
signal
strength – 0
to 3 bars
channel name
additional
info – volume/playback bars,
Stock Ticker, and Info Extras
10 11
power button – press to turn your AirWare on and off
mode button – switch between “LIVE” XM and “MY XM”
Time-shifting Memory Mode
menu button – customize options and access advanced features
channel buttons – preview channels (“LIVE”); preview songs
(“MY XM”)
XM button – select channel or menu option; push and hold to
add artist/song to your TuneSelect list
pause button – pause “MY XM” playback
volume buttons – raise or lower volume only when headphones
are plugged in
mute button – mute live XM
number keys – enter a channel directly or select your favorite presets
memory button – save and recall song information such as artist
and song title
ON THE FLIP SIDE
battery door
latch – push inward to
slide battery door open
reset button
battery
compartment
universal
connector
headphone
jack – your
ear buds or
headphones
plug in here
antenna
jack – for
use with an
external
antenna
XM Radio
ID – use this
to activate
your radio
listening mode – show
current listening mode
(“LIVE” or “MY XM”)
alarm indicator
alarm indicator
battery level and
charging status
clock
channel
number
artist
name
song or program title
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 10
12 13
What’s in the box?
Your AirWare®includes these
components:
home docking station
protective
case
audio cable
home power
adaptor
home antenna
swivel mount (with
extra adhesive pad)
headphones
rechargeable
lithium ion
battery
cassette adaptor
vehicle power adaptor
flush mount
cleaning kit
vent mount
AirWare®receiver
vehicle docking station
remote
control vehicle antenna
belt clip/stand
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 12
14 15
Setting Up
Assembly
Insert the battery and assemble your AirWare and its home
stand as shown; plug the AC adaptor into an outlet. Let
the battery charge for at least three hours.
Important! You will need to fully charge your AirWare
battery for at least three hours to have sufficient battery
power for portable use.
Insert battery
Assemble home docking
station
Connecting to a stereo
Plug the AC adaptor into an outlet. Connect the home
antenna and connect the line out to either your home
stereo or powered (PC type) speakers.
Receiving the XM signal
Turn your AirWare on by pressing the power button. You
should be able to hear channel 1, the XM Preview
Channel. If you do not, and the screen displays “NO
SIGNAL,” try moving your AirWare’s antenna to another
location. Make sure the antenna points south, either
outdoors or through a window. If the “NO SIGNAL”
message persists, refer to “Aiming the home antenna”
(page 30).
Please read the TIP below the illustration for optional
setup and activation procedure information.
TIP: Establishing a good signal environment in the home or
office setup is highly desirable, but this is not the only way
you can receive the XM signal. As an option, you can refer to
“Using AirWare In Your Vehicle” (page 31) and continue this
setup and activation process with your AirWare installed
in a vehicle.
Connect to stereo
Aim antenna
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 14
16 17
Activating Your AirWare
Turn the dial to highlight channel 0, and press the dial in
to select it. You should see an 8-character XM Radio ID
in the display. (The XM Radio ID should also be on your
AirWare’s package and under the battery.) Write the ID here:
The XM Radio ID does not use the letters I, O, S, and F.
Activate your XM Satellite Radio service by contacting
XM at http://activate.xmradio.com or by calling
1.800.XM.RADIO (1.800.967.2346). You will need the
XM Radio ID and a major credit card.
XM will send a signal from the satellites to activate the
full channel lineup. Activation normally takes 10 to 15
minutes, but during peak busy periods, you may need to
keep your AirWare on for longer to complete the
activation process. When you can access the full channel
lineup on your AirWare, you’re done!
Go Ahead!
Rotate the dial to preview a list of channels. When you
find one you’re interested in, press the dial in to tune to
that channel.
Listening To XM
Changing channels
1. Rotate the side dial to preview a list of channels.
2. When your desired channel is highlighted, press the
dial in to select that channel.
-OR-
1. Press the “pre/dir” button until the word
“DIRECT” flashes in the display.
2. Press the number keys corresponding to a channel
number. For channel 8, press “8.” For channel 130,
press “1,” then “3,” then “0.”
-OR-
1. Press the “ ” or “ ” buttons while in “LIVE” mode.
You will see the channels organized by category.
2. Rotate the dial to highlight a channel. Press the dial in
to select that channel.
2
1
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 16
18 19
Saving favorite channels into presets
Your AirWare can store up to 30 of your favorite channels
as presets. The presets are organized into three banks
(A, B, or C) that each contain 10 presets.
TO SAVE A CHANNEL INTO A PRESET:
1. Tune to the channel
using the dial or by
entering the channel
number.
2. Press the “pre/dir”
button until “PRESET
A,” “PRESET B,” or
“PRESET C” appears in
the display.
3. Press and hold a
number key to save that channel into that preset. For
example, by pressing and holding the “3” key, you
can save channel 45 into the “A-3” preset. Use the
“0” key for the tenth preset.
TO RECALL A PRESET:
1. Press the “pre/dir” button until “PRESET A,”
“PRESET B,” or “PRESET C” appears in the display.
2. Press the number key corresponding to your desired
preset. In the example, press the “3” key and your
AirWare should tune to channel 45.
You can use the preset banks to organize your channels
in different ways. You might want to store your favorite
channels in bank A, and someone else’s favorite channels
in bank B. Or store music channels in one bank, news
and talk channels in another.
Storing song information in memory
Ever hear a song and later forget the artist’s name or
song title? Let your AirWare remember for you.
TO STORE A SONG’S INFORMATION IN MEMORY: Press
and release the “memo” button while the song or program
is playing. Your AirWare will beep to confirm.
TO RECALL A SONG’S INFORMATION FROM MEMORY:
Press and hold the “memo” button until your AirWare beeps
and you see “Memory Recall” in the display. If you have
stored more than one song’s information, you can rotate
the dial to view each entry.
Your AirWare can hold up to 20 entries, after which any
new entry replaces the oldest entry in memory.
TuneSelect™: Always find your favorite songs
or artists
If you can’t get enough of a certain artist or song,
your AirWare can tell you when it’s being played on any
XM channel.
1. Press the “menu” button and choose the
“TuneSelect” option.
2. Choose either “Select by Song” or “Select by Artist.”
“Select by Song” finds a song or program by its title;
“Select by Artist” searches using the artist’s name.
3. When you hear one of your favorite songs or artists,
press in and hold the dial. Your AirWare will beep and
flash “Song Selected” or “Artist Selected” on the
display. This signals that your chosen song title or
artist name is saved in the TuneSelect list. The list
holds up to 20 entries (either artist names or song
titles); when the list is full, any new entry replaces the
oldest song title or artist in the list.
4. When any song or artist on the list is currently playing
on any other XM channel, your AirWare will beep and
flash “Artist/Song Found” on the screen. Switch to
that channel by pressing in the dial.
5. You may erase individual song titles or artists from the
list, or all the songs and artists. Using the “menu”
button and dial, choose the “TuneSelect” option and
then select either “Erase All” or “Erase Some.” Follow
the instructions on your AirWare’s display.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 18
20 21
My XM Time-shifting Memory Mode
2go: Store and play back
Your AirWare lets you store up to five hours of programming
and play it back at a later time or where live signal
reception is limited. Listen to XM wherever you are,
whenever you prefer.
TO STORE BY PRESSING
ONE BUTTON:
1. Turn on your AirWare and
select a channel.
2. Press the “2go” button. To
prevent you from accidentally
recording over a previously
stored program, your AirWare
will ask you to confirm. Press
the “2go” button again. The
center of the top line of your
AirWare’s screen switches from
“LIVE” to “REC.”
TIP: Press and hold the “2go” button and you can
automatically bypass the second confirmation “2go”
button press.
3. To stop storing and continue with live programming,
press the “2go” button again. The display reverts to
“LIVE” mode.
TO PLAY BACK:
1. Press the ”mode” button.
Your AirWare switches from
“LIVE” to “MY XM” and will
begin to play back from the
beginning or where you last
stopped or paused.
2. “MY XM” holds up to five
hours of programming. Press
either the “ ” or “ ”
button to skip to the previous
or to the next song.
3. You can also rotate the dial to
view a list of the stored artists
and songs. Simply highlight an
artist with the dial, then press the dial in to listen to it.
4. To return to LIVE listening, press the “mode” button
again.
Scheduling a session
You can set your AirWare to store XM programming at
a specific time using the “MY XM” Time-shifting
Memory Mode.
1. Press the “menu” button and use the dial to select
“MY XM.”
2. Select “Schedule MY XM.”
3. You can schedule up to two sessions. Choose
“Session 1” or “Session 2.”
4. Rotate the dial to change and press the dial in to fill
in the “How Often?,” starting time, ending time, and
channel fields. The “How Often?” option allows you
to activate the session “Once,” “Every Day,” or “Off”
(postponing until another time).
TIP: You can use the number buttons to enter the channel
number. You can also use the up, down, and XM buttons on
the remote to enter time and make selections.
5. Set up the second
session, if you desire.
The combined time
for both sessions
should not exceed five
hours in one day and
the sessions may not
overlap each other.
Your AirWare will advise
you if either condition occurs, and will give you another
chance to schedule the sessions.
6. Turn off your AirWare. When the session starts, the
display will show “Session 1 (or 2) Recording.” If your
AirWare is already on when the session is supposed to
start, AirWare skips the session and does not interrupt
your listening. When the session starts, it writes over
the oldest stored programs first, ensuring that you’re
always listening to the freshest programming.
Important!: You can only store a session if your AirWare is
turned off and plugged into the home stand, with the
AC adaptor connected and receiving power. You must
connect the home antenna to receive the XM signal.
TIP:
If you set the alarm to turn on your AirWare before a
session is scheduled to start, that session could be cancelled
if the AirWare is on and not off to begin the session.
7. To erase the stored content, choose the “Clear MY
XM” option under the “MY XM” menu. All previously
recorded content can no longer be accessed.
2
1
1
3
2
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 20
22 23
Personalizing Your AirWare
You can easily adapt your AirWare to the way you listen and
use the satellite radio. You can change how the display
appears, track stocks and other information, adjust your
AirWare’s audio output, and change how you use the display.
Simply press the “menu” button, rotate the dial to highlight
an option, and press the dial in to select. Your AirWare
guides you with instructions right on the screen.
If you ever get lost or decide not to change anything,
press the “menu” button to return to normal operation.
Or wait for about 15 seconds and your AirWare reverts by
itself.
Adjusting audio
You can ADJUST THE BASS OR TREBLE, which affects
both the headphones and audio outputs of the home
stand and vehicle cradle.
1. Press the “menu”
button and use the
dial to select “Set
Audio.”
2. Select “Set Tone.”
3. Rotate the dial to high-
light either “bass” or
“treble.” Press the dial
in to select.
4. Rotate the dial to
change the bass or
treble level. Press the
dial in to confirm.
5. When you’re done,
press the “menu”
button until you return
to normal operation.
Caution: Before putting on the headset, always adjust
the volume setting at the lowest level to avoid possible
hearing damage.
TO CHANGE THE AUDIO LEVEL of the cassette adaptor,
FM transmitter, or line-level audio output:
1. Press the “menu” button and use the dial to select
“Set Audio.”
2. Select “Line Out Level.” Your AirWare can detect when
you’re using the FM transmitter or cassette adaptor and
will make the appropriate changes to the settings.
3. Rotate the dial to change the audio level. Push the
dial in to confirm.
4. When you’re done, press the “menu” button until
you return to normal operation.
Changing display information
TO DISPLAY DIFFERENT INFORMATION ON THE SCREEN,
press the “display” button to cycle through these
options:
Primary display format Stock Ticker format
Info Extras format Scrolling text format
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 22
24 25
TO CHANGE THE APPEARANCE OF THE SCREEN, press the
“menu” button and select “Change Display.” You can
change the brightness and contrast, set how long the
backlight remains on, flip the screen between positive
(black characters on white background) or negative (white
characters on black background) modes, and set the way
the Stock Ticker and Info Extras appear on the screen.
Make any FM radio an XM radio
Your AirWare contains a built-in FM transmitter that sends
the XM audio signal to any nearby FM radio—home
stereo, boombox, car radio, or marine radio.
1. Turn on your FM radio and turn off your AirWare. Unplug
any headphone or audio cable from your AirWare’s head-
phone jack and any audio cables connected to the home
docking station or vehicle docking station.
2. You need to find an FM frequency that is not being
used by any commercial FM station. Tune your FM
radio to the following frequencies:
88.1, 88.3, 88.5, 88.7, 88.9, 106.7, 106.9, 107.1,
107.3, 107.5, 107.7, and 107.9.
Note which frequency has no FM station or the least
amount of interference.
3. Turn on your AirWare.
4. Using the “menu” button and the dial, select
“Set FM Frequency.”
5. Rotate the dial to highlight the FM frequency you
found in step 2. Press the dial in to select that
frequency.
6. You should now hear XM programming on your FM
radio. If the sound isn’t clear or you hear noise or
static, try another FM frequency. If you’re traveling,
you may need to retune periodically; this is due to the
differences in signal strength of local FM stations and
is not a problem associated with your AirWare.
NOTE: Wireless FM sound quality may vary dependant on
reception conditions.
TIP: When you plug headphones, a cassette adapter, or an
audio cable into the headphone jack, your AirWare
automatically turns off the FM transmitter.
TIP: In the rare situation that you cannot find an open
FM frequency, consult a professional car audio installer and
request information on the XM FM Direct Adaptor.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 24
26 27
Stock Ticker
With your AirWare, you can track up to 20 stock symbols
and see their prices and movements right on the
screen.*
TO ADD A STOCK SYMBOL:
1. Using the “menu” button and dial, select “Stock
Ticker.”
2. Rotate the dial to highlight “Add Stocks” and press
the dial in to select.
3. Rotate the dial to add each letter of the desired stock
symbol. Press the dial in after choosing each letter.
(Your AirWare has a list of more than 9,000 stock symbols,
and will not only help you complete each entry but
prevents you from entering incorrect symbols.)
4. When you’ve entered all your desired stock symbols,
press the “menu” button several times (or simply
wait a few seconds) until your AirWare returns to normal
operation.
5. Press the “display” button until you see “Stocks”
and a scrolling ticker across the bottom of the screen.
This display mode only works when you’re listening to
“LIVE” programming.
TO ERASE some or all of the stock symbols, use the
“menu” button and dial to select “Stock Ticker,” then
to select “Erase Stocks.” Follow the directions on your
AirWare’s screen.
Info Extras
XM Satellite Radio will broadcast information such as
sports scores and other features from time to time. To
see what’s available, press the “menu” button and
select “Info Extras.” Simply follow the instructions on the
display to select which Info Extras you’re interested in.
To view your chosen Info Extras, press the “display”
button until you see the Info Extras items at the bottom
of the screen. You can also affect how you view Info
Extras by selecting the “Change Display” option in the
menu.
*Quotes are provided by ComStock, Inc. and cover most
stocks listed on the NYSE, AMEX, or NASDAQ. Market
information is delayed by approximately 25 minutes.
Direct Tune: Select channels faster
Normally as you rotate the dial, you can preview what’s
playing on other XM channels before you push the dial
in to select a channel. To automatically tune to the
channel without pressing the dial, you can set the
following option:
1. Use the “menu” button and dial to select “Channel
Access.”
2. Select “Direct Tune.”
3. Select “Direct Tune On.” (To return to the factory default
method, select “Direct Tune Off”).
Setting time features
XM automatically sets the minutes of your AirWare’s built-in
clock. You can adjust the hours by time zone, choose
12- or 24-hour formats, and choose whether Daylight
Savings Time is used in your area.
Your AirWare also has a sleep timer and an alarm. You can
set the sleep timer to shut off your AirWare automatically
after 15 minutes or up to an hour. The alarm turns on
your AirWare at a certain time; you can choose to be alerted
by a beep or by XM programming.
Important!: If you use your AirWare in your vehicle, you can
choose whether your ignition key automatically powers
on your AirWare. Choose the “Vehicle Mode” menu, and
then the “Auto On/Off”. Set to “On” to turn AirWare on or
off with the ignition key. Set this option to “Off” if your
AirWare is connected to power that is always live; you must
then use AirWare’s power button to turn it on or off.
For vehicles with power outlets that are always powered,
we recommend that you use the “Delayed Power OFF”
feature. This avoids draining your vehicle battery if your
AirWare is left on.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 26
28 29
Skipping channels
You can simplify the list of channels that you see when
you rotate the dial. To skip over a channel:
1. Use the “menu” button and dial to select
“Channel Access.”
2. Choose the “Channel
Skip/Add” option.
3. You will see a list of
channels. There is a
“+” or a “-“ in front
of each channel. To
skip a channel, highlight
that channel and
press the dial in to
change the “+” to “-.” To add a channel, change
the “-“ to a “+.”
4. When you’re done, press the “menu” button twice
(or do nothing for 15 seconds) until your AirWare returns
to normal operation.
TIP: You can still tune to any channel by entering the
channel number or by pressing a preset. Skipping a
channel does not remove it from use.
TIP: This should not be used for “parental control.” To
completely block access to any XM channel, contact XM
Listener Care at 1.800.XM.RADIO (1.800.967.2346).
Returning to factory defaults
You can return your AirWare to its factory-installed format.
Be careful: This feature erases all settings, including
Stock Ticker, display options, audio options, channel
skip/add, Info Extras, and anything stored in “MY XM.”
1. Use the “menu” button and dial to select “Set Factory
Defaults.”
2. Select “Yes” to restore your AirWare to the factory settings.
Using AirWare At Home
Turn off your AirWare and your audio system. Connect your
AirWare to your audio system in either way illustrated below.
If you use the home docking station and connect it to a
stereo, you must plug in the AC adaptor and home antenna.
Your AirWare’s audio output will not work if these are not
connected.
If you attach your AirWare to powered speakers, adjust the
audio level using the speakers’ volume control.
TIP: If you hear nothing, try adjusting the volume controls
located on your AirWare. If there does not appear to be
power, check all connections and make sure all plugs are
inserted completely.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 28
30 31
Aiming the home antenna
Your AirWare can help you aim the home antenna to pull in
the strongest signal available.
1. Using the “menu” button and dial, choose
“Antenna Aiming.”
2. Slowly turn and tilt the antenna. The signal bars on
the display will change. Find the position that gives at
least two bars on either “satellite” or “terrestrial.”
3. The antenna aiming screen remains as long as it’s
needed to help you position the antenna. When
you’ve found the best position, press the “menu”
button to return to normal operation.
NOTE: Satellite radio reception depends on the ability of
the antenna to receive/record a signal. The signal may not
be available in buildings or if obstructed (e.g., by mountains,
trees, bridges, etc.).
Using AirWare In Your Vehicle
Because every vehicle is different, we can only provide
some general guidelines. If you need help, consult a
professional installer.
1. Decide which method (cassette adaptor, wireless FM
transmitter, or wired connection) is best for your
vehicle and location.
2. Always do a trial run before installing anything
permanently. Temporarily connect all power, audio,
and antenna lines. Make sure that you receive the
XM signal and that you hear XM programming
through your vehicle’s audio system. You must have
your vehicle antenna plugged in to the docking station
to receive the signal.
TIP: Your AirWare battery will charge in the vehicle docking
station only while the AirWare power is turned ON. Please
refer to “Other Things You Should Know” (page 37) for addi-
tional information regarding charging the AirWare battery.
Audio Quality Good Better Best
Audio quality
Use the CASSETTE ADAPTOR if your vehicle’s audio system
has a built-in cassette player.
Cassette Adaptor:
Wired FM:
Wireless FM:
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 30
32 33
The WIRELESS FM TRANSMITTER is the easiest and quickest
way to hear XM programming in your vehicle. Simply set
your FM radio and your AirWare to the same frequency.
Signal quality, however, may not be as good as other
methods.
Placing the antenna
Your XM antenna should be mounted on the vehicle’s
metallic roof, at least 6" from any window or sunroof. It
can be placed in the front, middle, or rear of the roof.
Avoid crimping,
twisting, or chafing
the XM antenna
cable. Try to use
existing holes, body
grommets, and other
wiring channels.
If the vehicle is a
hard- or soft-top
convertible, you may mount the antenna on the metal
trunk lid. It should be at least 4" from the rear window.
Ensure that the antenna and cable don’t interfere with the
opening or closing of the convertible top and the trunk lid.
TIP: If you route the antenna cable through the trunk
seal, use the lowest part of the weather seal. This should
minimize any water leaks.
TIP: If you use your AirWare’s wireless FM transmitter,
mount the XM antenna as close to your vehicle’s FM
antenna as possible. The FM antenna may be a wire or
metallic strip embedded in the windshield or rear window.
TIP: Don’t install the XM antenna inside your vehicle or
on a nonmetallic surface. Doing so will likely degrade
the signal and you will probably experience more signal
interruptions.
NOTE: Satellite Radio reception depends on the ability of
the antenna to receive/record a signal. The signal may not
be available in buildings or if obstructed (e.g., by mountains,
trees, bridges, etc.).
(Two optional locations)
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 32
34 35
Mounting your AirWare on the dash
We’ve included three types of mounts to help you install
your AirWare in your vehicle’s interior.
FLUSH MOUNT: Attach the included
adhesive pad to the back of your AirWare’s
vehicle docking station. Stick the vehicle
docking station onto a flat surface in
your vehicle, preparing the surface as
described below. Do not install the
mount on a leather surface. Doing so
could permanently damage the surface.
VENT MOUNT: Assemble the vent
mount as shown. Find a horizontal
air vent that is strong enough to
hold the weight of your AirWare and
its docking station. Clip the vent
mount into the vent.
SWIVEL MOUNT: Find a suitable
location; the mount uses a strong
adhesive and you’ll have difficulty
repositioning it after installation.
Do not install this mount on a
leather surface. Doing so could
permanently damage the surface.
Make sure the air temperature is at
least 60°F.
1. Clean the mounting surface with the enclosed surface
preparation kit. Allow to air-dry.
2. Clean the same surface with the alcohol prep pad.
Allow to air-dry.
3. You may warm the adhesive pad using a hair dryer
or the vehicle’s defroster. Place the swivel mount
accurately since it will bond on the first try.
4. For best results, do not touch or apply any pressure
to the vehicle mount for 72 hours.
To remove the swivel mount, first try lifting the adhesive
pad with your fingers or a spoon. You may warm it with
a hair dryer for 2-3 minutes to help soften the adhesive.
Remove any leftover adhesive from the dash surface by
rubbing with your finger, or you can use a mild cleaner
as recommended by your vehicle’s manufacturer.
Warning: AirWare should be placed in your vehicle
where it will not interfere with the function of safety
features, e.g., deployment of airbags. Failure to correctly
place AirWare may result in injury to you or others if the
unit becomes detached during an accident and/or
obstructs the deployment of an airbag.
Using AirWare On The Go
Your AirWare contains a built-in antenna that works best
when your AirWare receiver is upright. Use the belt clip to
hold your AirWare in the proper position; laying your
AirWare down flat may weaken reception.
TIP: If you carry your AirWare in a bag or use it while
exercising, you can lock the buttons and dial and
prevent something from accidentally pressing the
buttons. Press and hold the “mute/pause/lock” button
until you see the lock indicator in the display. To unlock
the controls, press and hold the “mute/pause/lock”
button until the lock indicator disappears.
TIP: The belt clip doubles as a table stand; just pull out
the back leg.
TIP: You can plug the AC or cigarette lighter adaptor
directly into the bottom of your AirWare.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 34
36 37
Signal reception guidelines
Your AirWare’s antenna should have an unobstructed view
of the XM satellites in the southern sky. In large cities,
XM also has a network of ground repeaters to help
increase the signal coverage.
Other Things You Should Know
Care
You should be able to take your AirWare along with you
during most of your daily activities. Still, you should
remember:
• Your AirWare is not waterproof. Avoid splashing it with
liquids and never submerge it.
• Take your AirWare with you when you leave your vehicle,
especially on a hot day. Not only can you continue to
enjoy XM programming, but you’ll also prolong the
life of your AirWare’s case, display, and battery.
• If your AirWare gets dirty, wipe the case with a soft cloth
lightly moistened with water, then wipe dry with
another cloth. Avoid chemicals such as paint thinner,
alcohol, or abrasive cleansers.
Important battery information—please read
Your AirWare’s battery should be charged before you use
the radio. The amount of charge is indicated by the
battery level meter in your AirWare’s display. When you’re
charging the battery, you will see . When the battery
is exhausted, you will see .
When you use your AirWare for the first time, charge the
battery until the meter indicates it’s fully charged .
Then use your AirWare until the battery is exhausted. This
charge/discharge cycle calibrates the battery level meter
so that it accurately reports the state of the battery.
Your battery performs best when used and charged in
an ambient temperature of between 50°F to 90°F (10°C
to 32°C). Do not leave your AirWare inside a hot vehicle or
in direct sunlight.
Batteries gradually wear down and require longer
charging times. When a battery no longer holds its
charge, you should purchase a new battery. Always
use authorized batteries and power adaptors.
Replacement batteries and power adaptors can
be ordered online at www.xmradio.com.
To prevent injuring yourself or damaging your AirWare, do
not disassemble, crush, or puncture the battery. Never
allow metal to touch the battery terminals.
Your AirWare’s rechargeable battery should be
disposed of properly and may need to be
recycled. Contact your local recycler for
details. Never dispose of batteries in a fire
or in water as
they may explode.
To remove the battery, follow the
steps as shown. Use the clear tab
to help you pull the battery out.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 36
38 39
TIP: Both the home and vehicle power adaptors can be
used independently from the home docking station and
vehicle docking station, plugging directly into the AirWare
power connector. This feature provides a convenient
alternative for battery charging and powered operation
when traveling or for using your AirWare away from home.
Optional Accessories (sold separately)
We’re always developing useful and clever accessories
for your AirWare. Check out www.xmradio.com or visit your
favorite electronics retailers frequently.
Troubleshooting
Your AirWare should provide you with trouble-free
performance without needing any servicing. If it
does not appear to be working properly, first try to
remedy the problem by following these steps:
1. Attach all connections firmly and securely.
2. Make sure the battery is fully charged.
3. Reset your AirWare by removing the battery cover and
inserting a paper clip into the hole marked “RESET” at the
upper left-hand corner of the case.
If you see this on the display:
NO SIGNAL
Cause: The XM signal is being
blocked.
ANTENNA
Cause: Possible problem with
the built-in or external XM
antenna.
Cause: When using home
docking station or vehicle
docking station, home or vehicle
antenna is not plugged in.
OFF AIR
Cause: The channel is not
currently broadcasting.
LOADING
Cause: Your AirWare is acquiring
audio or program information
from the XM signal.
UPDATING
Cause: Your AirWare is being
updated with the latest
encryption code.
Cause: You may have tried
to tune to a channel that
you have blocked or that
you cannot receive with your
subscription package.
You should:
Move your AirWare away from
obstructed area, e.g. an
underground garage.
Connect the external antenna.
Make sure the cable and
connector are not damaged
or kinked.
Make sure the home or vehicle
antenna is plugged into the
home docking station or
vehicle docking station, even if
the wearable antenna is already
plugged into the receiver.
Tune to another channel.
This message should
disappear in a few seconds
in good signal conditions.
Simply wait a few seconds
until the update is done.
To receive that channel,
contact XM Satellite Radio
at 1.800.967.2346.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 38
40 41
You should:
Check whether the lock indicator
is being displayed. If so, unlock the
controls by pressing and holding
the “mute/pause/lock” button
until the lock indicator disappears
(see page 35).
If you have unlocked the controls
and they still do not respond, reset
your AirWare by carefully inserting the
tip of a paper clip into the “RESET”
hole under the battery cover.
You can also reset your AirWare by
removing and reinserting the
battery.
Reset your AirWare by following the
procedure above.
Fully charge the battery, then
use your AirWare until the battery
is fully exhausted. This calibrates
the battery level meter.
If this happens:
There is no power, or your
AirWare shuts off quickly.
You do not receive all XM
channels you have subscribed
to.
Audio sounds distorted
when using the built-in FM
transmitter.
Audio is too soft when using
the built-in FM transmitter.
No audio when using the
home docking station that is
connected to a stereo system.
You cannot tune to a
channel.
No song title or artist
name displayed.
No audio when listening
through an FM radio.
Audio has static while
listening through an
FM radio.
Audio on XM Instant
Traffic and Weather
channels sounds different
from other XM channels.
You should:
Insert your AirWare into its home
docking station and plug the AC
adaptor into the wall to charge the
battery. Your AirWare’s battery is low
(see page 14).
Contact XM Satellite Radio
Your AirWare may not be activated
(see page 16).
Reduce audio output level
(see page 22).
Increase audio output level
(see page 22).
Check to see if you have plugged
the AC adaptor into the home
docking station. The audio line
output only works when the AC
adaptor is plugged in.
Check that you have not chosen to
skip that channel (see page 28). If
the problem persists, contact XM
Satellite Radio at 1.800.967.2346.
Verify that you are authorized to
receive that channel as part of your
XM subscription, and that you have
not asked XM Satellite Radio to
block that channel.
Nothing is wrong with your AirWare.
That information may be in the
process of being updated. On some
sports and news channels, there is
no title or artist information.
Make sure that the FM radio and
your AirWare are set to the same
frequency (see page 25).
Change to another FM frequency
(see page 25). If the problem
persists and you are using the
wireless FM transmitter in a
vehicle, change to a hard-wired
FM transmitter (see page 31).
Nothing is wrong with your AirWare.
These channels use a different
audio technology than the other
XM channels.
If this happens:
Your AirWare’s controls do
not respond.
The display does not
change or the backlight
does not turn on or
turn off.
Battery level meter doesn’t
match the charging or
expected playback time.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 40
42 43
LIMITED WARRANTY
WARRANTY VALID ONLY IN U.S.A.
WARRANTY
Pioneer Electronics (USA) Inc. (PUSA) warrants that products distributed by
PUSA in the U.S.A. that fail to function properly under normal use due to a
manufacturing defect when installed and operated according to the owner’s
manual enclosed with the unit will be repaired or replaced with a unit of com-
parable value, at the option of PUSA, without charge to you for parts or actu-
al repair work. Parts supplied under this warranty may be new or rebuilt at the
option of PUSA.
THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSE-
QUENT OWNER OF THIS PIONEER PRODUCT DURING THE WARRANTY
PERIOD PROVIDED THE PRODUCT WAS PURCHASED FROM AN
AUTHORIZED PIONEER DISTRIBUTOR/DEALER IN THE U.S.A. YOU WILL
BE REQUIRED TO PROVIDE A SALES RECEIPT OR OTHER VALID
PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE
OR, IF RENTED,YOUR RENTAL CONTRACT SHOWING THE PLACE AND
DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE
PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD,
TRANSPORTATION PREPAID, ONLY FROM WITHIN THE U.S.A. AS
EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR
REMOVAL AND INSTALLATION OF THE PRODUCT. PUSA WILL PAY TO
RETURN THE REPAIRED OR REPLACEMENT PRODUCT TO YOU WITHIN
THE U.S.A.
PRODUCT WARRANTY PERIOD
Portable Satellite Radio ...................….. 1 Year Parts & Labor
Portable Satellite Radio Battery .....…... 90 Days Parts & Labor
The warranty period for retail customers who rent the product commences
upon the date product is first put into use (a) during the rental period or (b)
retail sale, whichever occurs first.
WHAT IS NOT COVERED
IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DIS-
TRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTY OF MERCHANT ABILITY AND THE
IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND
THIS PRODUCT IS SOLD STRICTLY “AS IS” AND “WITH ALL FAULTS".
PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR
INCIDENTAL DAMAGES.
PIONEER DOES NOT WARRANT ANY PRODUCT LISTED ABOVE WHEN
IT IS USED IN A TRADE OR BUSINESS OR IN ANY INDUSTRIAL OR COM-
MERCIAL APPLICATION.
THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUB-
JECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING.
THIS WARRANTY DOES NOT COVER THE CABINET OR ANY APPEAR-
ANCE ITEM, USER ATTACHED ANTENNA, ANY DAMAGE TO THE PROD-
UCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHO-
RIZED IN WRITING BY PIONEER, ACCIDENT, MISUSE OR ABUSE, DAM-
AGE DUE TO LIGHTNING OR TO POWER SURGES, SUBSEQUENT DAM-
AGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, OR
THE USE OF BATTERIES NOT CONFORMING TO THOSE SPECIFIED IN
THE OWNER’S MANUAL.
THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR
WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER
THIS WARRANTY OBTAINED FROM ANY SOURCE OTHER THAN A PIO-
NEER AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED
LOCATION.
THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED
BY THE USE OF UNAUTHORIZED PARTS OR LABOR OR FROM IMPROP-
ER MAINTENANCE.
ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS
ENTIRE WARRANTY.
NO OTHER WARRANTIES
PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES
INCLUDING, BUT NOT LIMITED TO,THE IMPLIED WARRANTIES OF MER-
CHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO A
PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES
SHALL APPLY AFTER THE WARRANTY PERIOD. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS
AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMI-
TATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER
RIGHTS WHICH MAY VARY FROM STATE TO STATE.
TO OBTAIN SERVICE
PUSA has appointed a number of Authorized Service Companies throughout
the U.S.A. should your product require service. To receive warranty service
you need to present your sales receipt showing place and date of original
owner’s transaction. If shipping the unit you will need to package it carefully
and send it, transportation prepaid by a traceable, insured method, to an
Authorized Service Company. Package the product using adequate padding
material to prevent damage in transit. Include your name, address and tele-
phone number where you can be reached during business hours.
On all complaints and concerns call Customer Support at
1-800-421-1404.
DISPUTE RESOLUTION
Following our response to any initial request to Customer Support, should a
dispute arise between you and Pioneer, Pioneer makes available to you, with-
out charge, its Complaint Resolution Program. You are required to use the
Complaint Resolution Program before you exercise any rights under, or seek
any remedies, created by Title I of the Magnuson-Moss Warranty-Federal
Trade Commission Improvement Act, 15 U.S.C. 2301 et seq.
To use the Complaint Resolution Program call 1-800-421-1404 and explain to
the customer service representative the problem you are experiencing, steps
you have taken to have the product repaired during the warranty period and
the name of the authorized Distributor/Dealer from whom the Pioneer product
was purchased. After the complaint has been explained to the representative,
a resolution number will be issued. Within 40 days of receiving your com-
plaint, Pioneer will investigate the dispute and will either: (1) respond to your
complaint in writing informing you what action Pioneer will take, and in what
time period, to resolve the dispute; or (2) respond to your complaint in writing
informing you why it will not take any action.
For hook-up and operation of your unit or to locate an
Authorized Service Company, please call or write:
PIONEER ELECTRONICS SERVICE, INC.
P.O. BOX 1760
LONG BEACH, CALIFORNIA 90810
1-800-421-1404
http://www.pioneerelectronics.com
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 42
Pioneer Electronics (USA) Inc.
2265 E. 220th Street
Long Beach, CA 90810
www.pioneerelectronics.com
Printed on Recycled Paper
2005 ©Pioneer Corporation and Pioneer Electronics (USA) Inc. All rights reserved.
AirWare is a registered trademark of Pioneer Corporation.
The XM name, SM2Go, TuneSelect, and related logos are trademarks of XM Satellite Radio Inc.
user_gd_engfinl6.r3.qxd 3/25/05 12:46 PM Page 44
stuff...
What’s in the box?
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired operation.
The Pioneer XM AirWare Satellite Radio Receiver incorporates an
FM transmitter and is therefore classified as an intentional
transmitter. Changes or modifications to the unit not expressly
approved by Pioneer can void your authority to operate this
equipment.
Important: The FCC and FAA have not certified the Pioneer XM
AirWare Satellite Radio Receiver for use in any aircraft (neither
portable nor permanent installation). Therefore, Pioneer cannot
support this type of application or installation.
PIONEER ELECTRONICS (USA) INC.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90810
800-421-1404
Printed on Recycled Paper
2005 ©Pioneer Corporation. All rights reserved.
AirWare is a registered trademark of Pioneer Corporation.
The XM name, XM2Go, TuneSelect, and related logos are trademarks
of XM Satellite Radio Inc.
AirWare®receiver
Satellite Radio Receiver – Quick Guide
GEX-AIRWARE1
Warning: This manual contains important safety and operating information. Please read and follow
the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to
your AirWare receiver, accessories, and/or to your vehicle or other property.
headphones
vehicle antenna
rechargeable
lithium ion
battery
cassette adaptor
vehicle docking station
remote
control
belt clip/stand
cleaning kit
flush mount
vehicle power adaptor
swivel mount (with
extra adhesive pad)
vent mount
audio cable
home antenna
protective
case
home docking station
home power
adaptor
quik_gd_eng_fin4.qxd 3/8/05 2:32 PM Page 1
ready...
Getting set up
Install the battery
Be sure to charge your battery for at least 3 hours
on the home stand before use.
Set up
Assemble your AirWare®
and its home docking
station as shown.
Connect to stereo
Plug the AC adaptor into an outlet. Connect the
home antenna and connect the line out to either
your home stereo or powered (PC type) speakers.
1
2
3
4
display – backlit high-
resolution LCD display
2go button – store up to five
hours of XM programming
using the “MY XM” Time-shifting
Memory Mode
arrow buttons – cycle
through channel categories
(“LIVE”); skip to previous
or next song (“MY XM”)
mode button – switch
between “LIVE” XM and
“MY XM” Time-shifting
Memory Mode
preset/direct button – select
between direct channel entry or
up to 30 presets
number keys – enter a channel
directly or select your favorite presets
power button – press and hold to turn your AirWare on and off
dial – rotate to highlight a channel or menu option; push in to
make selection, or press and hold for TuneSelect
volume buttons – raise or lower volume only when headphones
are plugged in
menu button – access advanced features and configuration options
memory button – save and recall song information such as artist
and song title
mute/pause/lock button – press once to mute audio (“LIVE”) or
pause playback (“MY XM”); press and hold to lock or unlock your
AirWare controls
display button – change the appearance of the display, including
access to different modes that display stocks or sports scores
IR lens – aim
your remote
control here
Controls
Turn on your AirWare by pressing the power
button. You should be able to hear channel 1,
the XM Preview Channel, through your head
phones or attached stereo/speakers.
Before you begin, take a moment to familiarize yourself with
your AirWare’s controls. Most basic functions can be accessed
using the front panel buttons and the dial. More advanced
features are accessed using the “menu” button and the dial.
5Aiming the home
antenna
If you do not hear
channel 1, the XM
Preview Channel, and
the screen displays
“NO SIGNAL,” try moving your
AirWare‘s antenna to another
location. Make sure the
antenna points south outdoors or through a window.
Complete instructions, including an optional activation setup in
a vehicle, the availability of accessories designed to improve
your signal reception, and more useful information and tips
about your AirWare can be found in your AirWare User Guide.
Your AirWare can help you aim the home antenna to pull in the
strongest signal.
1. Using the “menu” button
and dial, choose “Antenna
Aiming.”
2. Slowly turn and tilt the
antenna. The signal bars on
the display will change. Find
the position that gives at
least two bars on either
“satellite” or “terrestrial.”
3. When you’ve found the best position, press the “menu”
button to return to normal operation.
Note: Satellite radio reception depends on the ability of the
antenna to receive/record a signal. The signal may not be
available in buildings or if obstructed (e.g. by mountains, trees,
bridges, etc.).
set... Activate and explore
Turn the dial to highlight channel 0, and press the dial in to select it.
You should see an 8-character XM Radio ID in the display. (The XM
Radio ID should also be on your AirWare’s package and under the
battery.) Write the ID here:
XM subscription required for reception of XM service. Not available in
Alaska or Hawaii. Activate your XM Satellite Radioservice by contacting
XM at http://activate.xmradio.com or by calling 1.800.XM.RADIO
(1.800.967.2346). You will need the XM Radio ID and a major credit card.
XM will send a signal from the satellites to activate the full channel
lineup. Activation normally takes 10 to 15 minutes, but during peak
busy periods, you may need to keep your AirWare on longer to
complete the activation process.
Rotate the dial to preview a list of channels. When you find one you’re
interested in, press the dial in to tune to that channel!
If you want to tune to a channel and know its channel number, you
can use the number keys. Press the “pre/dir” button until “DIRECT”
flashes in the display. Press the number keys corresponding to the
channel number, e.g., “4” followed by “5” for channel 45.
XM’s channels are organized
into categories such as “Rock,”
“Country,” “News,” and “Sports.”
Press the “ ” and “ ” buttons
to explore these categories; rotate
the dial to view the channels
within each category.
lock indicator
channel selection
mode – direct
entry or preset
banks A, B, or C
signal
strength – 0
to 3 bars
channel name
additional
info – volume/playback bars,
Stock Ticker, and Info Extras
The XM Radio ID does not use the letters I, O, S, and F.
go!
Charge the battery and store some music
2go: Store and play back with a single button
Your AirWare lets you store up to five hours of programming and
play it back at a later time. Listen to XM wherever you are, including
on an airplane, subway, or anywhere satellite coverage may be limited.
While the battery is charging in the home docking station, try storing
some XM programming from XM’s lineup of over 130 channels!
TO STORE:
1. Turn on your AirWare and select a
channel.
2. Press the “2go” button. To prevent
you from accidentally storing over
a previously stored program, your
AirWare will ask you to confirm. Press
the “2go” button again. The
center of the top line of your
AirWare’s screen switches from
“LIVE” to “REC.”
3. To stop storing and continue with
live programming, press the “2go”
button again. The display reverts to
“LIVE.”
TO PLAY BACK:
1. Press the mode button. Your AirWare switches from “LIVE” to
“MY XM”, and will begin to play back from the beginning
or where you last stopped or paused.
2. “MY XM” holds up to five hours of programming. Press
either the “ “ or “ “ button to skip to the previous or
to the next song.
3. You can also rotate the dial to view a list of the stored
artists and songs. Simply highlight an artist using the dial;
the artist, song title, and other useful information will
scroll by. Then press the dial in to listen to it.
go further...
Advanced features & additional info
Check out the User Guide for advanced features, troubleshooting
guidelines, and additional information.
listening mode – show
current listening mode
(“LIVE” or “MY XM”)
alarm indicator
alarm indicator
battery level and
charging status
clock
channel
number
artist
name
song or program title
2
1
quik_gd_eng_fin4.qxd 3/8/05 2:32 PM Page 2