Sirius XM Radio GEXINNO1 LOW POWER TRANSMITTER User Manual users manual
Sirius XM Radio Inc. LOW POWER TRANSMITTER users manual
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 640097 |
| Application ID | rx5sYX0BRmCEItWKBZcgsQ== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 156.19kB (1952392 bits) |
| Date Submitted | 2006-03-23 00:00:00 |
| Date Available | 2006-05-04 00:00:00 |
| Creation Date | 2006-02-21 14:28:52 |
| Producing Software | Mac OS X 10.3.9 Quartz PDFContext |
| Document Lastmod | 2006-03-23 07:32:47 |
| Document Title | users manual |
| Document Creator | QuarkXPress |
eng_usergd.qxd 2/21/06 2:28 PM Page 1 eng_usergd.qxd 2/21/06 2:28 PM Page 2 Contents Quick Start 1. Charge battery for at least 8 hours (page 12). 2. Set up your inno™ (page 20). 3. Activate your XM subscription (page 18). 4. Listen to and record live XM* (pages 26 and 32). 5. Listen to recorded content (page 36). 6. Buy songs from XM+Napster (page 55). 7. Manage your songs and playlists from your computer (page 56). Introduction .............................................. 4 Features .................................................... 4 Safety Instructions .................................... 7 What’s in the Box .................................... 10 Charging the Battery .............................. 12 inno Controls .......................................... 13 Using the Controls .................................. 15 inno Display ............................................ 16 Remote .................................................... 17 Subscribing to XM........................ 18 Using Your inno Alone .............. 20 Setup ...................................................... 20 Live XM .................................................. 26 TuneSelect™ .......................................... 29 Info Extras .............................................. 30 Recording XM.......................................... 32 Listening to Recorded XM Content (My Music) .............................................. 36 Organizing Your Music ............................ 37 *Hardware and required monthly subscription sold separately. Recorded music not for use in commercial establishments. Installation cost and other fees and taxes, including a one-time activation fee may apply. Subscription fee is consumer only. XM products, programming, services, and fees are subject to change, at any time, without notice. Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling 1-800-XM-RADIO. Subscriptions subject to Customer Agreement available at xmradio.com. XM service only available in the 48 contiguous United States. ©2006 XM Satellite Radio Inc. All rights reserved. Quick Start DRAFT Using inno with a PC .................. 48 System Requirements .............................. 48 Setup ...................................................... 49 Registering with XM+Napster ................ 51 What Can You Do with XM+Napster? .... 54 Exploring ................................................ 54 Purchasing Music .................................... 55 Organizing Your Music ............................ 56 Disconnecting Your inno from the PC ...... 60 Listening to XM Radio Online (XMRO) .... 61 Using Your CDs or MP3/WMA Files ........ 62 Updating inno Firmware .......... 64 Settings .............................................. 68 FM Modulator ........................................ 68 Aiming the Antenna ................................ 71 Audio ...................................................... 72 Display .................................................... 73 Channel Access........................................ 75 Clock and Alarm ...................................... 77 Memory Partition .................................... 80 Restoring Factory Defaults ...................... 81 Customer Support ........................ 82 Troubleshooting ...................................... 82 Specifications .......................................... 85 Patent Information .................................. 87 FCC Statement ........................................ 88 Warranty.................................................. 89 DRAFT Contents eng_usergd.qxd 2/21/06 2:28 PM Page 4 Introduction Introduction Features inno™, Undocked Congratulations on your purchase of the Pioneer Inno™. It’s the next-generation XM2go radio, with an XM receiver, built-in antenna, and storage for XM, MP3, or WMA music files in one portable device. ■ Listen to live and recorded XM* content ■ Play MP3 and WMA files ■ Manage your tracks, favorite channels, and playlists ■ Listen on the go Enjoy XM’s 160 channels from coast to coast, with over 80,000 hours of entertainment each month. XM offers musical choice, variety, and discovery – worlds beyond your own collection – plus a wide range of news, sports, talk, comedy, kids, and entertainment channels. Hear XM live, or save XM programming on your inno to listen at your leisure. We’ve also teamed up with Napster, a leading provider of online music. Imagine discovering a new artist on XM and then, with just a few clicks of a mouse, buying high-fidelity tracks and albums by that artist and similar artists. It’s that simple. Manage all your music – XM tracks, songs you purchase from Napster, and MP3/WMA files you rip from your CDs – with the easy-to-use XM+Napster program on your Microsoft® Windows® PC. One device, all the music you could ever hope for, and the easiest way to find the music you want – now that’s a music experience! inno + Cradle + Antenna ■ Listen to live and recorded XM* content ■ Play MP3 and WMA files ■ Manage your tracks, favorite channels, and playlists ■ Listen in your car or home We recommend that you read the entire manual before using your inno. *Hardware and required monthly subscription sold separately. Recorded music not for use in commercial establishments. Installation cost and other fees and taxes, including a one-time activation fee may apply. Subscription fee is consumer only. XM products, programming, services, and fees are subject to change, at any time, without notice. Channels with frequent explicit language are indicated with an XL. Channel blocking is available for XM radio receivers by calling 1-800-XM-RADIO. Subscriptions subject to Customer Agreement available at xmradio.com. XM service only available in the 48 contiguous United States. ©2006 XM Satellite Radio Inc. All rights reserved. Introduction DRAFT DRAFT Introduction eng_usergd.qxd 2/21/06 2:28 PM Page 6 Introduction Introduction inno + Cradle + Antenna + PC Safety Instructions ■ Manage content using inno or your PC inno Digital Audio Player ■ Listen to XM Radio Online ■ Purchase music from XM+Napster and upload it to your inno Please read and understand all the instructions to avoid injury to yourself and/or damage to your inno. Do not expose to extreme temperatures (above 140°F or below -4°F, or above 60°C or below -20°C). Do not expose to moisture. Do not use inno near or in water. Do not let any foreign matter spill into inno. Do not expose to chemicals such as benzene and thinners. Do not use liquid or aerosol cleaners. Clean with a soft damp cloth only. Do not expose to direct sunlight, fire, flame or other heat sources for a prolonged period. Do not try to disassemble and/or repair inno yourself. Do not drop your inno or subject it to severe impact. Do not place heavy objects on inno. Do not subject inno to excessive pressure. Do not touch the inno with wet hands. Do not store in dusty areas. Please be aware that Pioneer claims no responsibility for damage from data loss due to breakdown, repair, or other causes. Introduction DRAFT DRAFT Introduction eng_usergd.qxd 2/21/06 2:28 PM Page 8 Introduction Introduction Battery Charger Safety Protect your ears Caution: Opening the case may result in electric shock. Caution: The uninsulated parts inside the power adapter and cradle may cause electric shock or fire. For your safety, please do not open these components. Do not let metallic objects, such as necklaces or coins, come into contact with the power adapter plugs or battery terminal. Caution: To avoid electric shock, use the power adapter only with an outlet that matches the shape of the adapter’s plug. Caution: Make sure that you insert the adapter’s plug all the way into the outlet. Caution: Do not plug several devices into the same electrical outlet. Important: Always read and understand the user guide to prevent problems. Warning: Use the power adapter and cradle away from water sources to avoid fire or electric shock. ■ Take Environmental Information ■ Follow local guidelines for waste disposal when discarding packaging, batteries, and electronics appliances. ■ Your player is packaged with cardboard, polyethylene, etc., and does not contain any unnecessary materials. Earbuds and Headphones Follow traffic safety instructions ■ Do not use the earbuds while driving an automobile or riding a bicycle. It’s not only dangerous, but against the law. ■ Maintain a moderate volume when walking or exercising, so that you can be aware of what is happening around you. Introduction DRAFT care so that the earbud cable is not caught by your arm or other objects while walking or exercising. ■ Do not turn up the volume too high. Doctors warn against prolonged exposure to high volume. ■ Stop using your inno or turn the volume down if you have ringing in your ears. Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Set your equipment at a safe level BEFORE your hearing adapts. To establish a safer level: Start your volume control at a low setting; Slowly increase the sound until you can hear it comfortably and clearly, without distortion. Once you have established a comfortable sound level: Set the dial and leave it there; Taking a minute to do this now will help to preserve hearing. Pioneer and the Consumer Electronics Association recommend you avoid prolonged exposure to excessive noise. Under constant exposure such as sustained listening, sound levels above 85 decibels can be dangerous without hearing protection. (For reference, a garbage disposal or loud shouting at 3 feet away are around 80 decibels; a food blender or gas lawn mower at 3 feet away are around 90 decibels.) The longer your exposure and/or higher the sound level, the greater the danger of permanent hearing damage. Pioneer disclaims all liability for hearing loss, bodily injury or property damage as a result of use or misuse of this product. DRAFT Introduction eng_usergd.qxd 2/21/06 2:28 PM Page 10 Introduction Introduction What’s in the Box inno (GEX-INNO1) What’s in the Box Battery Earbuds AC power adapter Travel power cable RCA audio cable PostScript Picture image 69.eps Also included: User guide XM+Napster install CD Remote 10 Introduction Home dock/cradle DRAFT Home XM antenna USB cable Carrying case/holster DRAFT Introduction 11 eng_usergd.qxd 2/21/06 2:28 PM Page 12 Introduction Introduction Charging the Battery inno Controls Charge the battery for at least 8 hours before using inno for the first time, or if you have not used it for several months. Be sure to charge the battery in a place where the temperature is between 32°F and 113°F (0°C to 45°C). USB jack Earbud jack Power button – Slide down to turn power on or off. Slide up to “hold” controls, preventing you from accidentally pressing a button. Display Mode – Switch between “Live XM” or “My Music” (recorded content) 2. Insert battery into player. 1. Open battery compartment. Volume XM button – Start here; press to access channels, playlists, menus, and confirm selections Display button – Change what’s showing on the display Arrow buttons – Select menu entries, change channels Play/Pause 3. Plug adapter into cradle and wall socket. 12 Introduction DRAFT DRAFT Introduction 13 eng_usergd.qxd 2/21/06 2:28 PM Page 14 Introduction Introduction inno Controls Using the Controls Throughout this guide, you will see instructions such as “Select XM ➝ Settings ➝ Setup ➝ Antenna Aiming.” This tells you to perform the following actions: When you dock inno in its home cradle, both the display and arrow buttons rotate by 90° so that “up” really points up! 1. Press the XM button. 2. You will see a menu whose last option is “Settings.” Press the down arrow button several times to highlight “Settings,” then press the XM button to select it. 3. You will see another menu whose third option is “Setup.” Again, press the down arrow button to highlight “Setup,” and press the XM button to select it. 4. You will see another menu; one of the options is “Antenna Aiming.” Press the down arrow button to highlight “Antenna Aiming,” and the XM button to select it. Not all of the menu items described in this guide may appear on your inno display. For example, if you have not created any playlists, you will not see “Playlists” if you press the XM button while listening to “My Music.” ✍ NOTE: In most instances, pressing the left arrow button allows you to “back out” of any menu. 14 Introduction DRAFT DRAFT Introduction 15 eng_usergd.qxd 2/21/06 2:28 PM Page 16 Introduction Introduction inno Display Remote Available memory or antenna strength – Green portion indicates amount of unlocked storage available. Black portion indicates amount of storage taken up by locked XM songs (page 39). In “Live XM” mode, you will see a signal strength indicator instead. Indicates XM channel, playlist, or MP3 genre. Battery charge Power button Mode – (((XM))) shows you’re listening to live XM. (((My Music))) shows you’re listening to stored XM content or MP3/WMA tracks. Left arrow button – Pressing the left arrow button allows you to “back out” or exit most menus Alarm or H – ”H” indicates that the power switch is set in the “hold” position. Clock Mode – “Live XM” or “My Music” (recorded content) XM button – Access menus and confirm selections Volume Record – Record a song or channel Arrow buttons – Select menu entries, change channels Bookmark – Tag interesting songs or tracks Pause/Mute – Pause playback or mute live XM Numeric keypad – Select XM channels by channel number Favorites – Go to favorite channels Channel number Progress bar – Shows total track length and current location within a track while playing songs in “My Music.” Artist name Song title Additional symbols: PostScript Picture play small icon.eps play PostScript Picture playlisted song small icon.eps PostScript Picture fast forward small icon.eps playlisted PC song icon.eps reverse or fast-forward through track PostScript Picture pause PostScript Picture Locked song small icon.eps paused small icon.eps PostScript Picture previous small icon.eps PostScript Picture PC song small icon.eps 16 track assigned to a playlist PostScript Picture skip to previous or next track PC track (MP3 or WMA file) Introduction PostScript Picture repeat small icon.eps PostScript Picture random small icon.eps DRAFT PC track assigned to a playlist XM track is locked repeat track play tracks randomly Jump – Switch to previous channel you listened to DRAFT Display – Change what’s showing on the display Introduction 17 eng_usergd.qxd 2/21/06 2:28 PM Page 18 Subscribing to XM Subscribing to XM Before you can listen to or record XM content, you must activate your inno. 1. Set up your inno, cradle, power adapter, and antenna (page 20 or page 22). Make sure inno can receive the XM signal. 2. Place inno in the “Live XM” mode (page 26). 3. Find the 8-character XM Radio ID, which is printed on the package or in the battery compartment underneath the battery. Or select XM channel 0 to view the Radio ID. Record the Radio ID here for reference: ■ ■ ■■ ■ ■ ■■ The XM Radio ID does not use the letters I, O, S, or F. 4. Activate your XM Satellite Radio service online at http://activate.xmradio.com or by calling 1-800-XM-RADIO (1-800-967-2346). You will need a major credit card. XM will send a signal from the satellites to activate the full channel lineup. A c t i vation normally takes 10 to 15 minutes, but during peak busy periods you may need to keep your player on for up to an hour. When you can access the full channel lineup on your inno, you’re finished! 18 Subscribing to XM DRAFT DRAFT Subscribing to XM 19 eng_usergd.qxd 2/21/06 2:28 PM Page 20 Using Your inno Alone Using Your inno Alone Setup To AC power adapter While Traveling If you’re traveling, you can connect the power adapter directly to inno using the travel power cable. At Home 1. Insert inno into home cradle. 2. Connect inno to your audio system as shown. If your audio system does not have a line-level input, use inno’s built-in FM transmitter (page xx). Connect power adapter and home antenna. Point antenna toward the southern sky through a window. To your audio system’s line input or AUX input To home antenna 3. To optimize signal reception, you may mount the home antenna outdoors, facing south. Make sure the antenna is not blocked by buildings or trees. PostScript Picture outdoorantenna.eps 20 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 21 eng_usergd.qxd 2/21/06 2:28 PM Page 22 Using Your inno Alone Using Your inno Alone Setup 2. Insert inno into car cradle. In a Vehicle (requires Car Accessory Kit CD-INCAR1, sold separately) 3. Connect car cradle to antenna cable and power adapter. Every vehicle is different; for your safety, follow all instructions carefully. Consult a professional installer if you have questions. You can listen to your inno through your car stereo by using inno’s built-in FM transmitter. Simply find an unused FM frequency on the stereo and set inno to transmit on that same frequency. 1. Mount antenna to the roof or trunk of the vehicle. During installation, make sure you are outdoors and the antenna is not obstructed by tall buildings. PostScript Picture car.eps 22 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 23 eng_usergd.qxd 2/21/06 2:28 PM Page 24 Using Your inno Alone 4. To install the swivel mount, first find a suitable location. The swivel mount’s adhesive is very strong and may be difficult to remove. Do not install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C). Using Your inno Alone 5. To install the vent mount, find a horizontal vent that is strong enough to hold your inno and its cradle. To remove the vent mount, push it into the vent and lift upwards slightly to release the mount’s hooks from the vent vane. Clean the mounting surfaces with the surface preparation kit. Peel away the adhesive liner and firmly press the swivel mount to the surface for 30 seconds. Allow 24 hours before using the mount. PostScript Picture swivel mount.eps PostScript Picture vent mount.eps You can adjust the tension of the mount with a screwdriver. If you need to remove the mount, carefully lift the adhesive pad with your fingers or a spoon. Warming with a hair dryer for several minutes will help soften the adhesive. 6. Find an unused FM frequency on your car stereo. 7. Set your inno to the same FM frequency. (Refer to the section marked “Settings,” “FM Frequency.”) 8. Tune inno to XM channel 1. You should be able to hear XM through your car stereo. 24 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 25 eng_usergd.qxd 2/21/06 2:28 PM Page 26 Using Your inno Alone Using Your inno Alone Live XM Selecting Channels ✍ NOTE: You must receive a live XM signal for at least 8 hours a month (which may be split Press the up or down arrow buttons to scroll through the list of channels. over several listening sessions). This authenticates your XM subscription and ensures that you can continue to enjoy your recorded XM content and live XM programming. If you do not dock your inno as described, you will lose access to your recorded content and live XM programming. - OR – Press the number keys on the remote that correspond to the channel number. - OR – 1. Press the left arrow button on your inno. You will see a virtual keypad on the display. 2. Use the arrow buttons to select the digits corresponding to the channel number. Press the XM button after highlighting each digit. 3. When you’ve entered a valid channel number, your inno will tune to that channel within 2 seconds. Turn on your inno. Subscribe to XM (page 18) if you haven’t done so already. If you see “XM” at the top of the display, you’re listening to XM content that is currently being broadcast from the satellites. If you see “My Music” on the display, you’re listening to recorded XM or MP3/WMA tracks. Press the Mode button to switch to “Live XM.” 26 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 27 eng_usergd.qxd 2/21/06 2:28 PM Page 28 Using Your inno Alone Using Your inno Alone Favorite Channels TuneSelect™ You can save your favorite channels in an easily accessible list. TuneSelect™ finds your favorite artist or song whenever they’re currently being played on any XM channel. 1. While you’re tuned to a channel, press the XM button. 2. Select Favorites ➝ Add Channel. 3. Once you’ve saved your favorites, you can quickly access the list. From the “Live XM” screen, simply press the right arrow button to see your “Favorites” list. Press the up and down arrow buttons, then the XM button to select the desired channel. 1. When you hear one of your favorite songs, press XM ➝ Bookmark. 2. You should see the following menu: Select either “TuneSelect Artist” or “TuneSelect Song” to add the artist or song to your TuneSelect list. 4. To remove a channel from the “Favorites” list, select XM ➝ Favorites ➝ Edit Channels ➝ (channel name) ➝ Remove Channel. Categories What’s a “bookmark”? See page 44. XM channels are organized into categories, or genres, such as “Rock,” “Jazz,” or “News.” To find a channel by category: 1. Press the right arrow button one or more times. The category name appears in the display. “Favorites” is your first category if you have designated any channel as a “favorite channel.” 2. When you’ve found the category you want, press the up or down arrow buttons to select a channel. 3. Press the XM button to tune to that channel. 3. When any song or artist on your TuneSelect list is currently playing on any other XM channel, inno will beep and flash “Artist/Song Found” on the display. Switch to that channel by pressing the XM button. 4. To edit the TuneSelect list, press XM ➝ Settings ➝ Preferences ➝ TuneSelect ➝ Edit List. Choose song or artist and follow the directions on the display. 5. To turn the TuneSelect on or off, press XM ➝ Settings ➝ Preferences ➝ TuneSelect ➝ Alert and choose the desired setting. 28 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 29 eng_usergd.qxd 2/21/06 2:28 PM Page 30 Using Your inno Alone Using Your inno Alone To select stocks*: Info Extras XM Satellite Radio broadcasts information such as sports scores, stocks, and other features from time to time. 1. Press XM ➝ Settings ➝ Preferences ➝ Info Extras ➝ Stock Ticker ➝ Add Stocks. To choose sports or teams: 2. You should see a virtual keyboard that will allow you to enter a stock symbol. 1. Press XM ➝ Settings ➝ Preferences ➝ Info Extras ➝ Sports. 2. Use the arrow buttons to highlight (in yellow) a sport or team. 3. Press the XM button to select that sport or team. The name of the sport or team will turn green. 4. You may select more than one sport or team to display. Your chosen selections are shown in blue. To remove a selection, go to that entry and press the XM button; the entry will change color from blue to gray. 5. When you’re finished, press the left arrow button repeatedly until you return to the normal display. Or just wait several seconds for inno to return to its home screen automatically. 3. Use the arrow buttons to highlight the first letter in the stock symbol. Choose that letter by pressing the XM button. 4. Continue selecting letters by using the arrow and XM buttons. 5. Select “Enter” when you’ve entered the entire stock symbol. Your inno is smart enough to automatically complete some stock symbols. 6. You can track up to 20 stock symbols. When you’ve entered all your desired stock symbols, select “Exit.” 7. Press the left arrow button repeatedly (or simply wait a few seconds) until your inno returns to normal operation. To display Info Extras, press the Display button several times until you see sports scores or a stock ticker at the bottom of the display. 30 Using Your inno Alone DRAFT *Quotes are provided by ComStock, Inc. and cover most stocks listed on the NYSE, AMEX, or NASDAQ. Market information is delayed by approximately 25 minutes. Using Your inno Alone 31 eng_usergd.qxd 2/21/06 2:28 PM Page 32 Using Your inno Alone Using Your inno Alone Recording a Channel Recording XM Your inno enables you to record XM content for personal, non-commercial use. You may record XM content while listening to live XM or by scheduling a recording session. You can then listen to recorded XM content on the go. You can also personalize your XM content by creating playlists for every mood and occasion.* Recording a Single Song 1. While you’re listening to live XM, select XM ➝ Record ➝ Record Song. Don’t worry if you miss the beginning of the song; your inno captures the entire song even if you start up to 10 minutes after the song begins, as long as you’re already tuned to that channel. 1. While you’re listening to live XM, select XM ➝ Record ➝ Rec Channel. You will record the channel you’re currently listening to. 2. To stop recording at any time, select XM ➝ Record ➝ Stop Recording. If you change channels, inno automatically stops recording. 3. You can choose to stop recording at the end of the song you’re currently listening to by selecting XM ➝ Record ➝ Record Song. By selecting “Record Song,” you instruct your inno to stop recording at the end of the song. 2. You can continue recording the channel you’re listening to by selecting XM ➝ Record ➝ Rec Channel. 3. To stop recording at any time, select XM ➝ Record ➝ Stop Recording. If you change channels, inno automatically stops recording. SHORTCUT: To immediately start recording at any time, press and hold the XM button until you see the “Recording …” message appear on the display. *XM content cannot be downloaded from the inno digital audio player. If you wish to own a complete, high-fidelity version of digital content on demand, you should purchase content from XM+Napster. This allows you to store the content on multiple devices. 32 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 33 eng_usergd.qxd 2/21/06 2:28 PM Page 34 Using Your inno Alone Using Your inno Alone Scheduling a Recording Session You can set inno to record XM at a later time. When you schedule a recording session, remember that inno must be able to receive a live XM signal when the session begins. 3. To edit an existing session, select XM ➝ Record ➝ Schedule Recording. You will see a list of sessions. Highlight the session you wish to edit. 1. To schedule a recording session, select XM ➝ Record ➝ Schedule Rec ➝ New Session. 2. The “Scheduled Rec” display allows you to set various options. Use the up and down arrow buttons to adjust each entry. Press the left or right arrow buttons to move to the previous or next option. You can choose to schedule a session for “Today,” ”Everyday,” or a specific “Date.” Set start and stop times using the up and down arrow buttons. If the session length exceeds the available memory, you will record over the oldest XM tracks in the memory, so you’ll always have the latest content. You may not see all the sessions that you scheduled in the past. Sessions that have expired are automatically removed from the list. Choose the channel you want recorded. 5. To delete a session, choose Cancel Session. Choose “OK” to save the session or “CANCEL” to start over. 34 Using Your inno Alone DRAFT 4. Choose Edit Session to change the session’s options. At the scheduled time, your recording session will begin and change channels if needed. inno may be powered on or off; we recommend attaching the power adapter to ensure that there is sufficient power for the entire recording session. Remember that when you schedule a recording session, you are instructing inno to switch to the desired channel. DRAFT Using Your inno Alone 35 eng_usergd.qxd 2/21/06 2:28 PM Page 36 Using Your inno Alone Using Your inno Alone Listening to Recorded XM Content (My Music) Organizing Your Music When you see “My Music” at the top of the display, you’re listening to XM content that you have recorded and any MP3/WMA files you have transferred to your inno. All songs and tracks that are stored in your inno are normally played in the order that they were recorded or transferred into your inno. You can also sort the selections by artist, category, or channel. 1. To switch to “My Music” from “Live XM,” press the Mode button. 2. Press the up and down arrow buttons to view a list of songs that you have stored on inno. Highlight the song you want to listen to, then press XM ➝ Play to start playing from that song. Finding Your Music 1. While listening to recorded tracks in “My Music,” select XM ➝ Find. 2. Choose how to view your stored music. For example, to sort your stored music by artist, select Artists. 3. You can press the right arrow button to skip to the next song. Press the left arrow button to skip to the previous song. View all songs on your inno. 4. While you’re listening to a song, you can also press and hold the right arrow button to fast-forward through that song. Press and hold the left arrow button to reverse through the song. You can also sort songs by artists, by categories, by channels, or by recording sessions. ✍ NOTE: In order to access your XM content you have recorded on inno, you must (1) maintain an active XM Satellite Radio subscription, and (2) receive the live XM signal at least 8 hours a month. 3. Press the up or down arrow buttons to scroll through the list of artists. Press the XM button to select an artist. 36 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 37 eng_usergd.qxd 2/21/06 2:28 PM Page 38 Using Your inno Alone Using Your inno Alone Locking and Unlocking XM Content Shows the artist’s songs in the order they were recorded. Opens the Edit window, allowing you to add an artist to a playlist, lock or unlock all the artist’s songs, or delete all the artist’s songs. When you record XM, your inno records over the oldest XM tracks first. This ensures that you always hear the latest XM content. You can “lock” a song or track to prevent inno from recording over it. Locked songs occupy memory on your inno and reduce your available recording time. Remember that you can buy high-fidelity songs or albums from XM+Napster that can be stored either on your inno or on your PC. 1. While you’re listening to a song in “My Music,” press the up or down arrow buttons to view the list of songs. 2. Highlight the song you want to lock. 4. Once you’ve selected an artist, you will see a list of songs by that artist that you have recorded. 5. Select the song you want to hear using the arrow and XM buttons. Select XM ➝ Play to begin playing that song. 6. To return to the list of artists, press XM ➝ Find ➝ Artists and select another artist as in steps 3 and 4. 7. You can also sort your tracks by categories or by channels. WMA and MP3 songs show the category or genre that they are assigned to using their ID3 tags, which may or may not be the same as the XM category. WMA and MP3 songs are also assigned to a channel named “MP3/WMA.” 8. To view all the songs stored in your inno, press XM ➝ Find ➝ All Songs. 3. Select XM ➝ Edit Song ➝ Lock Song. 4. The locked song is indicated with a padlock symbol to the left of the song title. 5. To unlock a song, highlight the song in the list and select XM ➝ Edit Song ➝ Unlock Song. SHORTCUT: To lock the song you’re currently listening to, press and hold the XM button, then select Lock Song. You can also lock all songs by an artist, in a category, or in a channel. To lock all songs by an artist: 1. Select XM ➝ Organize ➝ Artists ➝ (artist name) ➝ Lock Artist. 2. All songs by this artist are displayed with a padlock symbol to the left of the song title. SHORTCUT: As soon as you’ve highlighted a song, simply press the right arrow button to start playback. 38 Using Your inno Alone DRAFT If you add a song to a playlist, that song is automatically locked. DRAFT Using Your inno Alone 39 eng_usergd.qxd 2/21/06 2:28 PM Page 40 Using Your inno Alone Using Your inno Alone Playlists – Adding Songs Playlists – Removing Entries You can create one or more custom lists, called playlists. Each playlist is an index of songs that play in a certain order. You can create a “morning drive” playlist, a “workout” playlist, a “best of” playlist, and more. You can remove entries from a playlist. Remember that removing a song from one playlist does not remove it from any other playlist, and does not delete that song from inno. 1. To add a song to a playlist, first select a song using the up or down arrow buttons. The song may be a recorded XM track, an MP3 track, or a WMA track, including songs purchased through XM+Napster. To remove one or more songs from a playlist: 1. Select XM ➝ Playlists ➝ (playlist name) ➝ Edit Playlist ➝ Remove Songs. 2. Use the up and down arrow buttons to highlight a song. 2. Select XM ➝ Edit Song ➝ Add to Playlist. 3. Press XM ➝ Select. The song’s name will change to green. 3. You can choose to add the song to an existing playlist or to create a new playlist. To choose an existing playlist, simply highlight and select the playlist name. To create a new playlist, choose New Playlist and use the virtual keyboard to name that playlist. 4. Use the up and down arrow buttons to highlight another song, and press the XM button to select that song. Do this for all the songs you want to remove; these songs are displayed in blue. 4. The display confirms by showing “(playlist name) (song title) Added.” 5. Select XM ➝ Remove Song(s) ➝ Yes. 5. Adding a song to a playlist automatically locks that song. 6. inno confirms by displaying “Songs Removed.” SHORTCUT: To add the song that you’re currently hearing to a playlist, press and hold the XM button, then select Add to Playlist. SHORTCUT: Instead of steps 3 and 4, press the right arrow button to select the song you want to remove. You can add a song to more than one playlist or a song to the same playlist more than once. You can also add all songs by an artist to a playlist: select XM ➝ Organize ➝ Artists ➝ (artist name) ➝ Add to Playlist. You can also add all songs in a particular XM channel or category to a playlist. 40 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 41 eng_usergd.qxd 2/21/06 2:28 PM Page 42 Using Your inno Alone Using Your inno Alone Playlists – Playing Playlists – Other Options 1. Select XM ➝ Playlists ➝ (playlist name) ➝ Select. Normally, the songs in a playlist appear in the order that they were added. 2. Choose a song you want to hear and press the XM button. 3. You will see the following options: To rearrange the songs in a playlist: 1. Select XM ➝ Playlists ➝ (playlist name) ➝ Edit Playlist ➝ Arrange Songs. 2. Use the up and down arrow buttons to highlight a song. Play songs in the order listed in the playlist, starting from the selected song. 3. “Pick up” that song by pressing the XM button. The song title changes to green. 4. Move the song using the up and down arrow buttons. 5. “Put down” the song by pressing the XM button. The song title changes back to yellow. Play songs in random order, starting from the selected song. To cancel random play, select a song but choose “Play” instead of “Random.” 6. Repeat steps 2-5 for any song you want to move. When you’re finished, press the left arrow button repeatedly until you return to normal operation. To rename a playlist: 1. Select XM ➝ Playlists ➝ (playlist name) ➝ Edit Playlist ➝ Rename Playlist. Repeat the selected song. To cancel repeat play, select a song but choose “Play” instead of “Repeat Song.” 2. Use the virtual keyboard to change the name of the playlist. 3. Select “Enter” when you’re finished, or “Exit” if you don’t want to save your changes. 4. To exit a playlist and return to all songs, select XM ➝ Find ➝ All Songs. 42 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 43 eng_usergd.qxd 2/21/06 2:28 PM Page 44 Using Your inno Alone Using Your inno Alone Bookmarking Songs Deleting Songs “Bookmarks” are a great way to remember interesting songs. You can view all your bookmarks through the XM+Napster application, look up information about the artist or album, or purchase a complete, high-fidelity version of the song that you may play on multiple devices through XM+Napster. You may also purchase songs by the same artist (or similar artists) through XM+Napster. When you’re no longer interested in a song or track, you can delete it from your inno. “Deleting” a song permanently erases it from memory, and is different from “removing” a song from a playlist. To bookmark a song in “My Music”: 1. Press the up or down arrow buttons until you highlight the song you want to delete. 1. Press the up or down arrow buttons until you highlight the song you want to bookmark. To delete one song from “My Music”: 2. Press XM ➝ Edit Song ➝ Delete ➝ Yes. 3. inno confirms the song is erased by displaying “Song Deleted.” 2. Press XM ➝ Edit Song ➝ Bookmark Song. 3. inno confirms by displaying “Info Added.” SHORTCUT: To delete the song that you’re currently listening to, press and hold the XM button, then select Delete. SHORTCUT: To bookmark the song that you’re currently listening to in “My Music,” press and hold the XM button, then select Bookmark Song. You can only bookmark live or recorded XM tracks, not MP3 or WMA tracks. To bookmark a song in “Live XM”: 1. Select XM ➝ Bookmark ➝ Bookmark Only. 2. inno confirms by displaying “Info Added.” 44 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 45 eng_usergd.qxd 2/21/06 2:28 PM Page 46 Using Your inno Alone To delete multiple songs from “My Music”: 1. Select XM ➝ Organize ➝ Songs. 2. Use the up and down arrow buttons to highlight a song. 3. Press XM ➝ Select Song. The song’s name will be displayed in green. 4. Use the up and down arrow buttons to highlight another song, and press the XM button to select that song. Do this for all the songs you want to remove. 5. Select XM ➝ Delete ➝ Yes. 6. inno confirms that the songs are erased by displaying “Songs Deleted.” SHORTCUT: Instead of steps 3 and 4, press the right arrow button to select the song you want to delete. 46 Using Your inno Alone DRAFT DRAFT Using Your inno Alone 47 eng_usergd.qxd 2/21/06 2:28 PM Page 48 Using inno with a PC Using inno with a PC System Requirements Setup The inno will not work with all computers. We recommend reading this entire section before using your inno with a PC. The PC system must meet the following requirements: To connect your inno to your PC: ■ Intel® Pentium®-class CPU 1. If you haven’t done so already, disconnect your inno and its cradle from your PC. ■ Microsoft Windows XP Home, Windows XP Professional, or Windows 2000 operating system* 2. Insert the XM+Napster CD into your computer’s CD or DVD drive. ■ At least 64 MB of RAM ■ At least 13 MB of available hard disk space for XM+Napster application ■ 3. The software should start automatically. You should see the following screen on your PC: Internet Explorer 5.1 or higher ■ Windows Click here to begin the installation. Media Player 9 or higher; Windows Media Player 10 recommended for Windows XP ■ Active Internet connection; we recommend a broadband (cable, DSL, or fiber) connection for optimal performance Click here only if you need to install these individual components. ■ The inno may not work with all computers meeting these requirements depending on system configuration and user demands on existing hardware and software. Click here when you’re finished with the installation procedure. *The following operating systems are not supported: Windows 95, Windows 98, Windows NT, Windows Me, and Mac OS. 48 Using inno with a PC DRAFT Follow the directions indicated on the screen. If you have any questions about the XM+Napster software, see the XM+Napster FAQs at http://napster.xmradio.com. DRAFT Using inno with a PC 49 eng_usergd.qxd 2/21/06 2:28 PM Page 50 Using inno with a PC Using inno with a PC 4. Reboot your PC if necessary, then restart the XM+Napster program. 5. Set up inno as shown and plug the USB cable into the PC. WARNING: Only use the USB supplied in the package. Other USB cables may not allow your inno to charge its battery or communicate with your PC. 6. Your PC should recognize inno. Close any file folders that appear on your screen. You can manage the contents of inno entirely by using the XM+Napster program. 7. When taking your inno with you, you must disconnect inno from the PC by following the procedure described in “Disconnecting Your inno from the PC” (page 60). 50 Using inno with a PC DRAFT Registering with XM+Napster Choose either the XM+Napster Light service or the XM+Napster service. XM+Napster Light allows you to buy individual songs or albums whenever you want. XM+Napster lets you stream music to your PC for an additional monthly subscription. XM+Napster XM+Napster Light Manage XM content and MP3/WMA files on your inno ✔ ✔ Transfer MP3/WMA files from your PC to your inno ✔ ✔ Buy individual songs or albums to keep forever, burn to CD, and transfer onto your inno ✔ ✔ Additional monthly subscription with XM+Napster required ✔ Download and listen to all the Napster music you want on your PC ✔ Listen to 70+ radio stations on your PC from XM Radio Online ✔ Community and music discovery tools ✔ DRAFT ✔ Using inno with a PC 51 eng_usergd.qxd 2/21/06 2:28 PM Page 52 Using inno with a PC To register, follow these steps: 1. Click File / Sign In on the XM+Napster application. Click on the link for new members. 2. Follow the directions indicated on the registration screen. You must have your active XM Radio ID and billing ZIP code to register. Using inno with a PC 3. If you choose XM+Napster, you must provide a valid credit card. Registering for XM+Napster Light does not require a credit card; you only need one when you purchase individual songs or albums. Simply select “Start XM+Napster Light” instead of entering your billing information. For XM+Napster, enter your credit card information. For XM+Napster Light, simply click here. 4. The next time you use XM+Napster, sign in with your user name and password to access the XM+Napster service. You can also use the XM+Napster software off-line, without signing in, and still retain the ability to manage your inno. 52 Using inno with a PC DRAFT DRAFT Using inno with a PC 53 eng_usergd.qxd 2/21/06 2:28 PM Page 54 Using inno with a PC Using inno with a PC What Can You Do with XM+Napster? Purchasing Music Using XM+Napster, you can: The XM+Napster store allows you to stream, download, or buy songs or albums. ■ Manage songs, playlists, and recording sessions on your inno ■ Stream – Listen to a song while your PC is connected to the Internet. ■ Transfer MP3 and WMA files between inno and your PC ■ ■ Explore and purchase music from XM+Napster’s enormous online store Download – Store music on your PC. You can listen to these songs any time, even if your PC is off-line. ■ Listen to XM Radio Online ■ Buy – Purchase the track or album. You can transfer these songs to your inno at any time. Exploring Explore XM+Napster’s online store and community, with over 1.5 million songs, 100,000 albums, and 80,000 artists. Search by entering an artist name, song title, or album. Drag and drop tracks or albums onto the “playlist/ radio” pane to play them on your PC. “buy only” – Only available to buy or to sample a 30-second clip from XM+Napster 54 Using inno with a PC DRAFT “download” – Available to buy, download, or stream from XM+Napster DRAFT Using inno with a PC 55 eng_usergd.qxd 2/21/06 2:28 PM Page 56 Using inno with a PC Using inno with a PC Organizing Your Music Recording Sessions The “Folder” pane lets you view the tracks stored on inno or on your PC, playlists, recording sessions, bookmarks, and more. Click on the desired folder to see its contents on the main pane. View and edit your inno recording sessions by selecting Library / inno / XM Recordings on the XM+Napster application. The main pane shows the contents of a folder. 56 Using inno with a PC View and manage all the XM content you recorded, WMA, and MP3 tracks on your inno and your PC. Drag and drop tracks or albums onto the “playlist/radio” pane to play them on your PC. Create a new recording session or choose an existing session. Enter the options for the recording session. Drag and drop purchased tracks into the “transfer” pane to move them from your PC to your inno. DRAFT DRAFT Using inno with a PC 57 eng_usergd.qxd 2/21/06 2:28 PM Page 58 Using inno with a PC Using inno with a PC Playlists Transferring Between PC and inno You can manage your inno playlists using XM+Napster. Simply dock your inno, then select Library / inno / Playlists. You can create new playlists, or edit or delete any playlists that are stored in your inno. To transfer a track or playlist from your PC to your inno, drag and drop the track or playlist into the “transfer” pane on the lower right-hand side of the XM+Napster application. You can also create and manage playlists for any music content stored on your PC. Select Library / My Playlists. To add a track to any playlist, select that track on the main pane and drag it to the playlist name in the “Folder” pane. Alternatively, right-click on the track name, then select the playlist you want to add the track to. You can only transfer songs that you have purchased from XM+Napster or songs that you have ripped from your audio CDs. WARNING: Though you can transfer non-MP3/WMA files to your inno using Windows, those files cannot be played as audio files. Furthermore, do not attempt to format the inno storage; doing so may cause damage to the device. You can move a PC playlist onto your inno by dragging that playlist name into the Library / inno / Playlists line. When you move tracks and playlists onto your inno, you may have to purchase that content from XM+Napster, if you have not done so already. inno playlists PC playlists 58 Using inno with a PC DRAFT DRAFT Using inno with a PC 59 eng_usergd.qxd 2/21/06 2:28 PM Page 60 Using inno with a PC Using inno with a PC Disconnecting Your inno from the PC Listening to XM Radio Online (XMRO) Before you remove your inno from its dock or unplug the USB cable from the dock or the PC, you must disconnect using one of the following methods: XM Radio Online gives you access to over 75 channels of the same amazing programming you hear on XM Satellite Radio, plus 10 select AOL Radio channels for even more choice. ■ In Windows: right-click on the Safely Remove Hardware icon , which is on the right side of the Windows taskbar. Select “USB Mass Storage Device,” and click on Stop. To access XM Radio Online, click on Home / Radio / XM Radio Online. Then simply choose your desired channel from the channel list. ■ On XM+Napster: click on the Disconnect Device icon or select File / Disconnect portable device. If you want to connect inno to your PC again, re-insert inno into its cradle. Save favorite channels in the preset buttons (at the top of the screen) by dragging a channel onto the desired button. Note that these presets are not the same as the “Favorite Channels” on your inno. You can enjoy XM Radio Online anywhere you have a PC and a high-speed connection. Remember that you cannot save or transfer XMRO programming onto your inno. 60 Using inno with a PC DRAFT DRAFT Using inno with a PC 61 eng_usergd.qxd 2/21/06 2:28 PM Page 62 Using inno with a PC Using inno with a PC Using Your CDs or MP3/WMA Files Burning CDs Use the XM+Napster application to rip tracks from a CD into your Napster library. Transfer MP3 and WMA files onto a recordable CD or DVD. Please note that the content recorded from XM cannot be burned onto a CD or DVD or otherwise transferred off your inno. 1. Insert an audio CD into your PC’s CD drive. 1. Insert a recordable CD or DVD into your PC’s CD/DVD drive. 2. Click on Library, then click on the CD icon in the “Folders” pane. You will see a listing of the CD tracks in the main pane. 2. Click Library. Ripping Your CDs 3. Click the Rip icon on the bottom of the main pane. By default, the tracks will be encoded into the WMA format at 128 kbps. You can change this setting by clicking File / Options / CD Options. 3. Pull up the Burn screen at the bottom of the main pane. 4. Drag and drop tracks into the “Burn” pane. 5. When you’ve finished selecting tracks, click Burn Disc. Importing Tracks into XM+Napster If you have already created MP3 or WMA files in your computer, you can import them into your Napster library. 1. Click File / Import Tracks to My Library … 2. Follow the directions on the screen. For more information, please see the XM+Napster FAQs at http://napster.xmradio.com. 62 Using inno with a PC DRAFT DRAFT Using inno with a PC 63 eng_usergd.qxd 2/21/06 2:28 PM Page 64 Updating inno Firmware Updating inno Firmware Occasionally we make improvements to the inno firmware, which is the software that makes your inno work. Updating the firmware is a quick and easy process. Remember that: ■ Your inno must be docked in its cradle with a power adapter and must be connected to your PC ■ Your PC must be connected to the Internet If you have installed and use XM+Napster, it automatically checks the firmware when you connect inno to your PC. XM+Napster notifies you when it’s necessary to update the firmware. Simply follow the instructions. Don’t worry if you miss a firmware update. XM+Napster will always check whether your inno needs an update or not. Updating inno Firmware 1. Insert the XM+Napster CD in your PC’s CD-ROM or DVD drive. The XM+Napster software should start automatically. 2. Click on Browse CD. Using XM+Napster 64 Using the Update Tool If you don’t use XM+Napster, you can update the inno firmware manually. DRAFT 3. Click on Utils, then click on XMFirmwareUpdateClient. 4. Follow the instructions on the PC screen. You can run this firmware update tool at any time. If the firmware needs to be updated, the tool will install it automatically. If the firmware is already up-to-date, nothing happens. DRAFT Updating inno Firmware 65 eng_usergd.qxd 2/21/06 2:28 PM Page 66 66 DRAFT DRAFT 67 eng_usergd.qxd 2/21/06 2:28 PM Page 68 Settings Settings FM Modulator FM Frequency Set the FM frequency that inno transmits on. Your inno contains a built-in FM modulator (or FM transmitter) that allows you to listen to whatever your inno is playing using an ordinary FM radio. All you have to do is set your inno and the FM radio to the same frequency. 1. Dock inno to the home cradle or car cradle. 2. Find an unused FM frequency on your FM radio. Note that FM frequency. Turn the FM modulator on or off manually – or automatically when inserted into a home or car cradle. 3. Select XM ➝ Settings ➝ FM Modulator ➝ FM Frequency. Adjust the volume level of the FM transmission. 5. Press the XM button to confirm your selection. 4. Use the up and down arrow buttons to choose the same FM frequency as in step 2. You should hear XM programming over your FM radio when your inno and radio frequencies match. FM Mode Choose one of these settings: 68 Settings DRAFT AUTO FM transmitter turns on when you dock inno in the car or home cradle. FM transmitter turns off automatically when you undock inno. inno always returns to AUTO when powered off. ON Turns on the FM transmitter. You must plug in the earbud or travel power cable. OFF Turns off the FM transmitter. Make sure you select this option when you’re on an airplane. DRAFT Settings 69 eng_usergd.qxd 2/21/06 2:28 PM Page 70 Settings Settings FM Level Aiming the Antenna When listening to your inno using the FM modulator, you can adjust its volume level to match other audio sources (your CD player, other FM stations, or MP3 player). For optimal reception of XM’s live satellite signal, your inno antenna should have an unobstructed view of the XM satellites in the southern sky. In large cities, XM also has a network of ground repeaters to help increase the signal coverage. 1. Select XM ➝ Settings ➝ FM Modulator ➝ FM Level. 2. Press the left arrow button to decrease the volume level or the right arrow button to increase the volume level. 3. Press the XM button to confirm your selection. Your inno can help you aim the home antenna to pull in the strongest possible signal. 1. Select XM ➝ Settings ➝ Setup ➝ Antenna Aiming. 2. Slowly turn and tilt the antenna. The signal bars on the display will change. Move the antenna around until you see at least four bars on either “Satellite” or “Terrestrial.” 3. The antenna aiming screen remains as long as it’s needed to help you position the antenna. When you’ve found the best position, press the left arrow button repeatedly to exit the Settings menu. 4. Select XM channel 1. You should be able to listen to the XM Preview Channel. 70 Settings DRAFT DRAFT Settings 71 eng_usergd.qxd 2/21/06 2:28 PM Page 72 Settings Settings Display Audio Tone Brightness and Contrast You can adjust the audio tone quality to suit the kind of music you’re listening to. To change the screen’s brightness and contrast: 1. Select XM ➝ Settings ➝ Preferences ➝ Set Tone. 1. Select XM ➝ Settings ➝ Preferences ➝ Change Display ➝ Brightness. 2. Press the up or down arrow buttons to select either “Bass” or “Treble.” Adjust the tone settings by pressing the left or right arrows. 2. Press the left or right arrow buttons to adjust brightness. 3. Press the XM button to save your setting and exit the tone control menu. Then press the left arrow button repeatedly until you return to normal operation. 3. Press the XM button to confirm your selection. Then press the left arrow button repeatedly until you return to normal operation. Backlight Timer Line Out Level Your inno screen remains lit for a short time after you press a button. To adjust this time period: If you connect inno to another stereo system, you can adjust inno’s audio level to match other audio sources. This is not a volume control; use the volume control on your stereo instead. 1. Select XM ➝ Settings ➝ Preferences ➝ Change Display ➝ Backlight Timer. 1. Select XM ➝ Settings ➝ Setup ➝ Line Out Level. 3. Press the XM button to confirm your selection. 2. Press the up and down arrow buttons to select the desired time period. 2. Use the left or right arrow buttons to decrease or increase the audio level. 3. Press the XM button to confirm your selection. Then press the left arrow button repeatedly until you return to normal operation. 72 Settings DRAFT DRAFT Settings 73 eng_usergd.qxd 2/21/06 2:28 PM Page 74 Settings Settings Channel Access Stock Ticker If you created a stock ticker, you will see stock symbols and their prices displayed at the bottom of inno’s display. You can control the way the ticker is displayed. Direct Tune 1. Select XM ➝ Settings ➝ Preferences ➝ Change Display ➝ Display Appearance ➝ Stock Ticker. Normally, as you scroll through live XM channels using the up and down arrow buttons, you can preview what’s playing on each channel before you select it. inno does not switch to that channel until you push the XM button. You can change this so that inno automatically tunes to the channel that you’re previewing. 2. Select Scrolling to see the ticker move across the screen from right to left. Select By Pages to view the ticker as if you’re flipping pages of a book. 3. Press the XM button to confirm your selection. Info Extras If you choose sports or other Info Extras features, you will see sports scores and other information displayed at the bottom of inno’s display. You can control the way this information is displayed. 1. Select XM ➝ Settings ➝ Preferences ➝ Channel Access ➝ Direct Tune. 2. Select Direct Tune On. 3. Press the XM button to confirm your selection. Then press the left arrow button repeatedly until you return to normal operation. To return inno to its default behavior, select Direct Tune Off. 1. Select XM ➝ Settings ➝ Preferences ➝ Change Display ➝ Display Appearance ➝ Info Extras. 2. Select Scrolling to see the ticker move across the screen from right to left. Select By Pages to view the ticker as if you’re flipping pages of a book. 3. Press the XM button to confirm your selection. 74 Settings DRAFT DRAFT Settings 75 eng_usergd.qxd 2/21/06 2:28 PM Page 76 Settings Settings Clock and Alarm Channel Skip/Add You can simplify the list of channels that you see when you press the up and down arrow buttons. To skip a channel: Time 1. Select XM ➝ Settings ➝ Preferences ➝ Channel Access ➝ Channel Skip/Add. 1. The time is automatically set using the XM signal. Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Set Clock ➝ Select Time Zone to set the correct time zone for your location. 2. You will see a list of channels. Press the XM button to skip a channel. You’ll see the Channel Skip icon displayed beside the channel name. You can choose to skip more than one channel. 2. Your inno automatically adjusts for Daylight Savings Time. To turn this feature off, select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Set Clock ➝ Daylight Savings Time ➝ No. 3. To add a channel that has been skipped, highlight that channel then press the XM button. 4. Press the left arrow button when you’re finished. 3. To display time in 12- or 24-hour format, select the desired format through XM ➝ Settings ➝ Setup ➝ Set Time ➝ Set Clock ➝ 12/24 Hour Mode. 5. inno confirms by displaying “Channel List Updated.” Sleep Timer You can still tune to a channel directly by using the virtual keypad to enter its channel number. Your inno has a sleep timer that can automatically shut off the unit after a period of time. Channel skip/add should not be used as a form of parental control. To completely block access to an XM channel, contact XM Listener Care at 1-800-XM-RADIO (1-800-967-2346). 1. Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Sleep Timer. 2. Select the desired time period. 3. Press the XM button to confirm the selection. Your inno will remember this setting the next time you turn on your inno. The sleep timer resets to “Off” every time you turn inno off. 76 Settings DRAFT DRAFT Settings 77 eng_usergd.qxd 2/21/06 2:28 PM Page 78 Settings Settings Alarm Vehicle Mode Your inno has an alarm that can be set to sound at a certain time. If you listen to your inno in a vehicle, you’ve probably plugged the power adapter into the cigarette lighter socket. In some vehicles, the cigarette lighter is turned on or off with the ignition key; in other vehicles, the cigarette lighter is powered all the time. To prevent your battery from being drained, choose one of the following settings: 1. Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Set Alarm. 2. To turn on the alarm, highlight “Alarm (Off)” and press the XM button. 3. Press the up or down arrow buttons to set the desired time. 4. Press the X M button to confirm. The alarm icon will appear in the display next to the clock. 1. Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Vehicle Mode. 5. To cancel, press the left arrow button. 2. Choose one of the following settings: Turn alarm on or off. OFF Choose this option if the cigarette lighter is always powered. You must turn inno on or off using its own power switch. ON Choose this option if the ignition key switches the cigarette lighter on and off. OFF or 60-180 minutes Another option if the cigarette lighter is always powered: inno automatically turns off 60 to 180 minutes after you turn it on. Auto ON/OFF Choose between music or an alarm tone when the alarm goes off. Delayed Power Off 3. The setting is saved even if you turn inno off. 78 Settings DRAFT DRAFT Settings 79 eng_usergd.qxd 2/21/06 2:28 PM Page 80 Settings Settings Memory Partition Restoring Factory Defaults The internal storage in inno can store recorded XM content and MP3/WMA files. By default, the storage is divided 50/50, but you can select different memory partitions: To restore all inno settings and preferences to a “factory fresh” state: setting typical storage for content recorded from XM typical storage for PC (MP3 and WMA) tracks 50/50 XM/PC files 50 hours 16 hours 100% XM 100 hours 0 hours 1. Select XM ➝ Settings ➝ Setup ➝ Restore Defaults. 2. You should see this display: Restore just the settings to factory defaults. To change the memory partition: Restore settings to factory defaults and erase all music. 1. Select XM ➝ Settings ➝ Setup ➝ Memory Partition. 2. Highlight the desired setting and press the XM button. 3. Confirm by selecting Yes, or cancel by selecting No. CAUTION: When you change the memory partition, you will erase all your stored XM content and MP3/WMA tracks from your inno. 80 Settings DRAFT 3. Confirm by selecting Yes, or cancel by selecting No. DRAFT Settings 81 eng_usergd.qxd 2/21/06 2:28 PM Page 82 Customer Support Customer Support Troubleshooting 82 Troubleshooting If you see this on the display: You should: If this happens: You should: No Signal Something is blocking the XM signal. Move your inno away from the obstructed area (e.g., an underground garage). There is no power or your inno shuts off quickly. Your inno battery may be low. Charge the battery by docking your inno in the cradle and plugging in the AC adapter. Check Antenna Plug the antenna into the home or vehicle cradle. Make sure the antenna wire is not bent or broken. inno shuts off unexpectedly. Off Air The channel you’ve selected is not currently broadcasting. Tune to another channel. Check whether you set the sleep timer, and set it to “Off” if desired. Check whether “Vehicle Mode/Delayed Power Off” is set, and set it to “Off” if desired. inno remembers the “Vehicle Mode” setting even when you turn the device off. Loading Your inno is acquiring audio or program information from the XM signal. This message should disappear in a few seconds in good signal conditions. You do not receive all the XM channels you have subscribed to. Check that you have not skipped any channels (page 76). If you still do not receive all channels, your inno may not be activated. Contact XM Satellite Radio. Updating XM is updating your inno with the latest encryption code. Simply wait a few seconds until the update is done. – OR – You may be attempting to tune to a channel that is blocked or that you cannot receive with your subscription package. To receive that channel, contact XM Satellite Radio at 1-800-967-2346. No audio. Check all connections between your inno and your stereo system. No song title or artist name is displayed. Nothing is wrong with your inno. That information may be in the process of being updated. Some channels, such as news and sports, may not have such information. No audio when listening to inno through an FM radio. Check that your inno and your radio are tuned to the same FM frequency. Audio fades or has static when listening through an FM radio. You might be hearing interference from another FM station. Set your inno and your radio to a different FM frequency. Audio sounds too soft or is distorted when listening to an FM radio. Raise or lower the FM audio level until the sound quality improves. XM Instant Traffic and Weather channels sound different from other channels. Nothing is wrong with your inno. These channels use a different audio technology than the other XM channels. Controls do not respond. Check whether the power switch is in the "hold" position. If so, slide it to the center position to unlock the controls. --- (no artist or title) No program information, such as artist name or song title, exists. Channel You are attempting to tune to a channel that is not available. All Recording Features Not Available Activate your XM subscription to enable you to store XM programming on your inno. This Channel Not Available for Recording Some programming cannot be recorded due to restrictions placed by the content owners. This Program Not Available for Recording Some programming cannot be recorded due to restrictions placed by the content owners. Connect to XM Antenna Within ## Days to Avoid Interruption in Listening to XM Recordings You must receive a live XM signal for at least 8 hours a m o n t h . This authenticates your XM subscription and ensures that you can continue to enjoy your recorded XM content and live XM programming. Select “Live XM” and make sure you get a strong signal. The controls still refuse to respond, the display does not change, or the backlight does not turn on or off. Reset your inno by removing and re-inserting the battery. Please connect to XM Antenna to Confirm Valid Subscription Activation required for playback Activate your XM subscription. Battery level meter does not match the expected charge or playback time. Fully charge the battery, then use your inno until the battery is exhausted. This calibrates the battery level meter. Customer Support DRAFT DRAFT Customer Support 83 eng_usergd.qxd 2/21/06 2:28 PM Page 84 Customer Support Customer Support Troubleshooting Specifications If this happens: You should: inno Player inno does not communicate with your PC. Check the power and USB connections between the cradle and your PC. Be sure to use the supplied USB cable; any others may prevent your inno from charging or communicating properly with your PC. Remove your inno from its cradle, then re-insert. Dimensions 56 mm (W) x 94 mm (H) x 16 mm (D) 2.2 in (W) x 3.7 in (H) x 0.6 in (D) Weight Artist and song title information does not display correctly. inno may not correctly show the artist and song information (ID3 tags) of certain foreign songs. 128 g 4.5 oz Cannot transfer songs that were downloaded with Napster To Go™ into inno. inno is not compatible with Napster To Go’s monthly subscription service. To transfer songs from your PC to your inno, you must purchase individual songs or albums from XM+Napster Light or XM+Napster. Storage capacity 1 GB Music file formats MP3 (64-320 kbps) WMA (64-192 kbps) WMA DRM (Secure WMA) XM content Audio output 3.5 mm mini-stereo jack Antenna connector (home and car cradles) RF SMB Battery Type: lithium polymer Voltage: 3.7 V Capacity: 1750 mAh External power Voltage: 5 V DC Current: 2000 mA Polarity: PostScript Picture (polarity.eps) 84 Customer Support DRAFT DRAFT Customer Support 85 eng_usergd.qxd 2/21/06 2:28 PM Page 86 Customer Support Customer Support Patent Information Specifications Remote Dimensions 39 mm (W) x 95 mm (H) x 12 mm (D) 1.5 in (W) x 3.7 in (H) x 0.47 in (D) Weight 40 g 1.4 oz Battery Type: CR2032 Voltage: 3 V Model Numbers 86 inno player GEX-INNO 1 Home kit CD-INHOME1 Car accessory kit CD-INCAR1 Customer Support DRAFT Technology. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise make available any technology incorporated in receivers compatible with the XM Satellite Radio System or that support the XM website, the Online Service or any of its content. Furthermore, the AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. You also agree not to upload, post, transmit or otherwise make available any material that contains software viruses or any other computer code, files, or programs designed to interrupt, disable, or limit the functionality of the XM website or the Online Service. Furthermore, the music, talk, news, entertainment, data, and other content on the Services are protected by copyright and other intellectual property laws and all ownership rights remain with the respective content and data service providers. You are prohibited from any export of the data (or derivative thereof) except in compliance with applicable export laws, rules, and regulations. The user of this or any other software contained in an XM Radio or the XM website and all software used in connection with either is explicitly prohibited from attempting to copy, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into human-readable form. The software is licensed solely for use within this product. DRAFT Customer Support 87 eng_usergd.qxd 2/21/06 2:28 PM Page 88 Customer Support Customer Support FCC Statement LIMITED WARRANTY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 88 ■ Reorient or relocate the receiving antenna. ■ Increase the separation between the equipment and receiver. ■ Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. ■ Consult the dealer or an experienced radio/TV technician for help. Customer Support DRAFT WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics of Canada, Inc. (POC), warrants that products distributed by PUSA in the U.S.A., and by POC in Canada that fail to function properly under normal use due to a manufacturing defect when installed and operated according to the owner’s manual enclosed with the unit will be repaired or replaced with a unit of comparable value, at the option of PUSA or POC, without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of PUSA or POC. THIS LIMITED WARRANTY APPLIES TO THE ORIGINAL OR ANY SUBSEQUENT OWNER OF THIS PIONEER PRODUCT DURING THE WARRANTY PERIOD PROVIDED THE PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DISTRIBUTOR/DEALER IN THE U.S.A. OR CANADA. YOU WILL BE REQUIRED TO PROVIDE A SALES RECEIPT OR OTHER VALID PROOF OF PURCHASE SHOWING THE DATE OF ORIGINAL PURCHASE OR, IF RENTED, YOUR RENTAL CONTRACT SHOWING THE PLACE AND DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION PREPAID, ONLY FROM WITHIN THE COUNTRY OF PURCHASE AS EXPLAINED IN THIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OF THE PRODUCT. PUSA OR POC, AS APPROPRIATE, WILL PAY TO RETURN THE REPAIRED OR REPLACEMENT PRODUCT TO YOU WITHIN THE COUNTRY OF PURCHASE. (warranty continues next page) DRAFT Customer Support 89 eng_usergd.qxd 2/21/06 2:28 PM Page 90 Customer Support PRODUCT WARRANTY PERIOD Portable Satellite Radio……………………………...… 1 Year Parts & Labor Portable Satellite Radio Battery……………………… 90 Days Parts & Labor The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first. WHAT IS NOT COVERED IF THIS PRODUCT WAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY “AS IS” AND “WITH ALL FAULTS”. PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES. PIONEER DOES NOT WARRANT ANY PRODUCT LISTED ABOVE WHEN IT IS USED IN A TRADE OR BUSINESS OR IN ANY INDUSTRIAL OR COMMERCIAL APPLICATION. THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING. THIS WARRANTY DOES NOT COVER THE CABINET OR ANY APPEARANCE ITEM, USER ATTACHED ANTENNA, ANY DAMAGE TO THE PRODUCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHORIZED IN WRITING BY PIONEER, ACCIDENT, MISUSE OR ABUSE, DAMAGE DUE TO LIGHTNING OR TO POWER SURGES, SUBSEQUENT DAMAGE FROM LEAKING, DAMAGE FROM INOPERATIVE BATTERIES, OR THE USE OF BATTERIES NOT CONFORMING TO THOSE SPECIFIED IN THE OWNER’S MANUAL. THIS WARRANTY DOES NOT COVER THE COST OF PARTS OR LABOR WHICH WOULD BE OTHERWISE PROVIDED WITHOUT CHARGE UNDER THIS WARRANTY OBTAINED FROM ANY SOURCE OTHER THAN A PIONEER AUTHORIZED SERVICE COMPANY OR OTHER DESIGNATED LOCATION. THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR LABOR FROM IMPROPER MAINTENANCE. ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY. (warranty continues next page) 90 Customer Support DRAFT Customer Support NO OTHER WARRANTIES IN THE U.S.A. - PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. IN CANADA – EXCEPT AS EXPRESSLY PROVIDED HEREIN, THERE ARE NO REPRESENTATIONS, WARRANTIES, OBLIGATIONS OR CONDITIONS, IMPLIED, STATUTORY OR OTHERWISE, APPLICABLE TO THIS PRODUCT. TO OBTAIN SERVICE PUSA has appointed a number of Authorized Service Companies throughout the U.S.A. should your product require service. To receive warranty service you need to present your sales receipt showing place and date of original owner’s transaction. If shipping the unit you will need to package it carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product using adequate padding material to prevent damage in transit. Include your name, address and telephone number where you can be reached during business hours. DRAFT Customer Support 91 eng_usergd.qxd 2/21/06 2:28 PM Page 92 Customer Support Customer Support On all complaints and concerns call Customer Support at 1-800-421-1404 DISPUTE RESOLUTION Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available to you, without charge, it’s Complaint Resolution Program. You are required to use the Complaint Resolution Program before you exercise any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et seq. To use the Complaint Resolution Program call 1-800-421-1404 and explain to the customer service representative the problem you are experiencing, steps you have taken to have the product repaired during the warranty period and the name of the authorized Distributor /Dealer from whom the Pioneer product was purchased. After the complaint has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, Pioneer will investigate the dispute and will either: (1) respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing informing you why it will not take any action. For hook-up and operation of your unit or to located an Authorized Service Company, please call or write: PIONEER ELECTRONICS SERVICE, INC. P.O. BOX 1760 LONG BEACH, CALIFORNIA 90810 1-800-421-1404 http://www.pioneerelectronics.com 92 Customer Support DRAFT DRAFT Customer Support 93 eng_usergd.qxd 2/21/06 2:28 PM Page 94 PostScript Picture XM logo.eps DRAFT XM respects copyrights. This device is for personal use only. XM Programming stored on the device cannot be transferred off the unit. Download legally. Buy digital music from XM+Napster. The XM name, related logo, TuneSelect, and inno are trademarks of XM Satellite Radio Inc. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 48 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:eb7046d1-de8b-4997-9436-486ace6bf95d Producer : Mac OS X 10.3.9 Quartz PDFContext Create Date : 2006:02:21 14:28:52-08:00 Creator Tool : QuarkXPress Modify Date : 2006:03:23 07:32:47-05:00 Metadata Date : 2006:03:23 07:32:47-05:00 Document ID : uuid:f40d9fe6-a3c6-11da-b0da-001124314dc0 Instance ID : uuid:f40da488-a3c6-11da-b0da-001124314dc0 Format : application/pdf Creator : QuarkXPressEXIF Metadata provided by EXIF.tools