Sirius XM Radio SA10177B XM Satellite RX and FM TX User Manual Part 2

Download:
Mirror Download [FCC.gov]
Document ID	697419
Application ID	2ieCYbZjvezaR12Tazk9tg==
Document Description	Users Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.57kB (957124 bits)
Date Submitted	2006-08-24 00:00:00
Date Available	2006-10-09 00:00:00
Creation Date	2006-08-24 15:06:43
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual Part 2

Listening to X51“!
Selecting channels
Select a channel directly by entering its channel number. Press the
"pre/dir" button (step 1) until GE) appears on the screen. Then press the
number buttons (step 2) corresponding to the channel“ Channel 12 can be
entered as "1," then by "2," or as "0," ”1," and ”2."
Or press the up and down arrows to quickly step through each channel.
When you find one you like, press the ”select" button.
(D A
a CD
menu select
D CD
disp A V
C’ D€LPHI x3 roadyxt C"
e:
A Warning: When using this product it is always important to keep your eyes on the road and your hands on the
wheel Not doing so could result in injury and/or death to yourself or to others and/or in property damage
Searching for channels by category
XM channels are arranged by categories, or neighborhoods. This allows
you to see all channels in the “Flock" category, for example.
Press the ”menu” button (step 1), go to ”Search Mode," and select "By
Category."
Each press of the "search" button (step 2) tunes you to the first channel of
a new category.
Notice that the icon is highlighted in the display,
Use the arrow buttons (step 3) to sample the channels within a category.
Press the “select” button to choose a channel.
If you do nothing for 10 seconds, the radio automatically returns to the
normal channe selection method,
Searching for channels by scanning
Your roadyXT can also scan through each channel, pausing long enough to
hear the programming before moving on to the next one.
Press the "menu” button (step 1), go to “Search Mode," and select "By
Scanning” (step 2).
Press the “search” button to begin scanning (step 3). Each channel plays
for about 5 seconds. While scanning channels, @ blinks in the display.
Press the “search" button again to stop on a channel.
mm
I u
i Inning:
Using presets
Your roadyXT can store up to 30 of your favorite channels as presets.
The presets are organized into three banks (A, B, or C) that each contain
10 presets.
Press the "preldir" button one or more times to select bank A, B, or C (step 1),
After you’ve tuned to your desired channel, press and hold a number
button to save the channel into that preset (step 2).
Whenever you want to quickly tune to that channel, simply press that
button again.
You can use the preset banks to organize your channels in different
ways: Store your favorite channels in bank A, and someone else’s favorite
channels in bank B. Or use one bank for music, another for news“
D, E, ,,
Memory and jump
Press the “memory” button to remember a song’s artist or title. Your
roadyXT can remember up to 20 entries. (After 20, any new entry replaces
the oldest entry in memory.)
To recall the list of songs, press and hold the "memory" button, then use
the up and down arrow buttons to step through the list.
Press the ”jump" button to return to the previous channel you were
listening to.
You can press and hold the "jump" button for FM presets. See page 16
for more information.
..n" l.“ i:
Personaiizing Your roadyX?
You can easily adapt your roadyXT to suit your listening habits. Simply
press the ”menu” button to see the options you can customize. If you ever
get lost or decide not to change anything, press the “menu” button several
times to return to normal operation. Or just wait about 15 seconds and
roadyXT automatically cancels whatever you’re doing.
Making your vehicle’s FM radio an XM radio
Your roadyXT contains a built-in FM transmitter that sends the XM audio
signal to your car or marine FM radio when using the vehicle cradle only.
1. Turn on your FM radio, and turn off your roadyXT.
2. Unplug any cassette adapter or audio cable from the roadyXT cradle.
if you are using the Delphi FM Direct Adapter (model SA10112, sold
separately), connect it to the vehicle cradle.
3. Find an FM frequency that is not being used by any commercial FM
station. Tune your FM radio through the FM band and note which
frequency has no FM station or the least amount of interference.
.Turn on your roadyXT.
Press the "menu" button and select ”FM Frequency.”
Match the FM frequency that you found in step 3.
You should now hear XM programming on your vehicle's FM radio. If the
sound isn't clear or you hear noise or static, try another FM frequency. If
you're traveling, you may need to retune periodically; this is due to the
differences in signal strength of local FM stations and is not a problem
with your roadyXT.
8. Pressing and holding the ”jump" button for 2 seconds pulls up a list of
the last six FM frequencies you selected. This allows you to quickly tune
to unused FM frequencies when using the FM transmitter. Use the arrow
buttons and the ”select" button to choose the frequency you want.
$5091?!“
Screen color
To change the color of the display, press the "menu" button and select
“Screen Color." Use the arrow and the “select" buttons to choose a color;
to cancel, press the "menu" button“
Contrast
To vary the contrast of the display, press the "menu" button and select
“Contrast." Use the arrow buttons to adjust the contrast, and press the
“select” button to confirm.
Audio level
You may adjust roadyXT’s audio output level if it is too high (causing
distortion) or too low. Choose a setting so that the XM audio matches your
other audio sources, such as your CD player or FM radio“ To change the
audio output level, press the ”menu" button and select “Audio Level.” Use
the arrow buttons to adjust the level and the "select" button to confirm.
Press the "menu" button to exit“
Most users should NOT need to change this level from the factory setting“
This is not a volume control; you should set the volume using the audio
system that is connected to your roadyXT.
Aiming the antenna
Note: For use with the Home Kit, sold separately.
Your roadyXT can help you choose the best antenna position and
orientation.
1. Press the ”menu" button. Use the arrow and "select" buttons to choose
“Antenna Aiming."
2. Slowly turn and tilt the antenna. The signal bars on the display will
change. Find the position that gives at least two bars on either "satellite"
or ”terrestrial."
3. The antenna aiming screen remains as long as it’s needed to help you
position the antenna. When you've found the best position, press the
"menu" button twice to return to normal operation.
TuneSelect”
TuneSelect can alert you whenever one of your favorite songs or artists is
playing on any XM channel.
1. Press the ”menu" button and select the ”TuneSelect" option, then select
"Song or Artist.” You can choose to select “By Song" (factory default) or
”By Artist." Press the “menu" button again to return to normal operation.
2. When you hear one of your favorite songs or artists, press and hold the
"select" button until you hear a beep. This indicates that roadyXT has
saved the song or artist information to its TuneSelect list. The list holds
up to 20 entries; when it is full, any new entry replaces the oldest song
in the list.
3. When any song or artist on the list is currently playing on any XM channel,
your roadyXT beeps and flashes ”Artist / Song Found" on its display.
4. Press the “select” button to switch to that channel.
5. To edit the list, press the ”menu" button and choose the “TuneSelect"
option, then the “Erase" option. You can either erase specific songs or
artists on the list, or erase all songs and artists.
Stock Ticker
You can track up to 20 stock symbols and see their prices and movements
right on the roadyXT’s display.*
T0 AM) A STOCK SYMBOL:
1. Press the ”menu" button, select "Stock Ticker,” and select ”Add Stocks."
2. Use the arrow buttons to add each letter of the desired stock symbol.
Press the "select” button after choosing each letter. (Your roadyXT has a
list of more than 9,000 stock symbols, and will not only help you complete
each entry but prevents you from entering incorrect symbols.)
3. When you’ve entered all your desired stock symbols, press the "menu”
button several times (or simply wait a few seconds) until your roadyXT
returns to normal operation.
4. Press the "disp" button until you see ”Stocks" and a ticker across the
bottom of the screen.”
"m PHASE A STOCK SYMBUR
1. Press the ”menu” button , select “Stock Tucker,” and select "Erase Stocks.”
2. Choose “Erase All” or ”Erase Some.”
3. if you’re erasing some stocks, press the arrow buttons to select the stock to
be deleted. Press the ”select” button to erase the chosen stock symbol.
4. Press the "menu” button several times to return to normal operation.
*Quotes are provided by ComStock, Inc. and cover most stocks listed on the NYSE, AMEX, or NASDAQ
Market information is delayed by approximately 25 minutes
** Extreme cold temperatures can aflect the performance of the LCD in “Scroll" mode. We recommend you
change to the ”Pages" mode until the temperature rises.
Info Extras
XM Satellite Radio will broadcast information such as sports scores and
other features at various times.*
Press the "menu" button and select "Info Extras” (step 1). Use the arrow
buttons to see what's available (step 2)“
Press the ”select” button to add or remove the Info Extras item (step 3)“
u n
indicates that you have not yet selected the item; + means you've
chosen the item.
To view the Info Extras that you chose, press the "disp" button until you
see the Info Extras items at the bottom of the screen (display mode 5)“
ore/div
*Sports scores are provided by Stats, Inc

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 10
Author                          : 
Creator                         : 
Producer                        : 
Title                           : 
Subject                         : 
Create Date                     : 2006:08:24 15:06:43

EXIF Metadata provided by EXIF.tools