Siselectron Technology WE2220 2.4GHz b/g/n, 5GHz ac/a/n Indoor AP User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2877305
Application ID	LxJm1VN+7d1G/p7eexOYVw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	198.61kB (2482669 bits)
Date Submitted	2016-01-19 00:00:00
Date Available	2016-01-20 00:00:00
Creation Date	2015-12-29 13:47:51
Producing Software	Microsoft® Word 2010
Document Lastmod	2016-01-12 11:42:33
Document Title	Users Manual
Document Creator	Microsoft® Word 2010
Document Author:	Jose Fernando Palma Angulo

Table of Contents
Chapter 1
Key Features/Introduction....................................................................
System Requirements / Package Contents ..........................
Applications .................................................................................................
Technical Specifications...................................................... ...................
Physical Interface ......................................................................................
Chapter 2
Considerations for Wireless Installation .............................
Chapter 7 Wireless
Computer Settings ................................................................................ 7
Hardware Installation ............................................................................ 10
Mounting the SWE 2220..................................................................... 11
Chapter 3
Default Setting ........................................................................................... 13
Chapter 4
Access Point Mode.................................................................................... 14
WDS AP Mode.............................................................................................. 15
WDS Bridge Mode..................................................................................... 16
Chapter 5
Overview............................................................................................................. 17
Connections ........................................................................................... 19
Chapter 6
Operation Modes/Basic........................................................................ 20
IP Settings/SpanningTree Settings.......................................... 21
Wireless Network......................................................................
Wireless Security.....................................................................
Guest Network Settings.................................................
Fast Roaming...............................................................................
Fast Handover ............................................................................
Wireless MAC Filtering...........................................................
Wireless Advanced ....................................................................
WPS (Wi-Fi Protected Setup).............................................
WDS Link Settings........................................................
23
25
30
31
31
32
33
34
35
Chapter 8
Administrarion.....................................................................................
36
Management VLAN Settings...............................................
37
Wireless Traffic Shaping.......................................................
38
SNMP Settings..................................................................................
39
Backup/Restore..................................................................................
41
Auto Reboot Settings...............................................................
42
Firmware Upgrade/Time Settings.....................
System Log/Tools...........................................................................
43
45
Ping Test Parameters/Traceroute Parameters.......
46
SpeedTestParameters/LED Control........................
Device Discovery/Reset..................................................
47
48
Appendix
FCC Interference Statement..............................................
49
Introduction
Key Features
or
• Up to 26 dBm transmit power, enabling long range connectivity
• Supports IEEE802.11ac/a/b/g/n wireless standards with up to
300Mbps(2.4GHz) and 867Mbps(5GHz)
• Four internal 5dBi Omni-Directional MIMO antennas
• Can be used with included power adapter or via PoE with PoE
802.3at - capable Switches or Injectors
• Dual Band/Two Stream
• Band Steering shifts dual band clients to 5 GHz for better
throughput performance
• Secured Guest Network
Introduction
The SWE 2220 is a high-powered, long-range, Dual-band
concurrent Wireless 802.11ac/a/b/g/n Access Point with three major
alternative to ordinary Access Points that don’t have the range and
functional modes. It is designed to operate in numerous environments;
reach to connect to a growing number of wireless users who wish
from large homes, small and medium-sized businesses, multiple-floor
to connect to a large home or business network.
offices, hotels,and other venues, to larger enterprise deployments. Its
high-powered, long-range characteristics make it a cost-effective
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For Taiwan: Copyright © 2015 Siselectron Technology Ltd. All rights reserved.
The SWE 2220 supports the 2.4
GHz frequency band
under the
System Requirements
802.11b/g/n mode while at the same time providing a 5 GHz band for
The following are the Minimum System Requirements in order
communicating or transferring files
configure the device:
in a less congested network
frequency band.
The
SWE 2220
also
delivers
faster
wireless speeds compared
to modern 802.11a/b/g/n wireless devices. Even though the SWE
2220 has been
designed and engineered for heavy
traffic
and
demanding business environments, in larger housing environments
as it can efficiently extend the wireless range of an existing home
router.
This makes it especially ideal in architecturally-challenging
Computer with an Ethernet interface or wireless network
capability
•
Windows OS (XP, Vista, 7, 8), Mac OS, or Linux-based operating
systems
•
Web-Browsing Application (i.e. : Internet Explorer, Firefox,
Chrome, Safari, or another similar browser application)
Package Contents
The SWE 2220 package contains the following items (all items
structures, providing whole home connectivity.
To protect sensitive data during wireless transmissions, the
•
SWE
must be in package to issue a refund):
2220 offers different encryption settings for wireless transmissions,
•
SWE 2220 Access Point
including industry standard WPA and WPA2 encryption. The SWE 2220
•
Power Adapter
alsoincludes MAC address filtering to allow network administrators to
•
RJ-45 Ethernet Cable
•
Quick Installation Guide
•
Ceiling and Wall Mount Screw kit
offer network access only to known computers and other devices based
on their MAC addresses.
Applications
Wireless LAN (WLAN) products are easy to install and highly efficient. The
following list describes some of the many applications made possible
through the power and flexibility of WLANs:
• Difficult-to-Wire Environments: There are many situations where • Training/Educational Facilities: Training sites at corporations
or students at universities use wireless connectivity to
wires cannot be installed, deployed easily, or cannot be hidden
exchange information peer and easily access information
from view. Older buildings, sites with multiple buildings, and/or
learning purposes.
areas that make the installation of a Ethernet-based LAN
impossible, impractical or expensive are sites where WLAN can be
a network solution.
• Temporary Workgroups: Create temporary workgroups/networks
in more
open
areas within
a building; auditoriums,
amphitheaters classrooms, ballrooms, arenas, exhibition centers,
or temporary offices where one wants either a permanent or
temporary Wireless LAN established.
• The Ability to Access Real-Time Information: Doctors/Nurses,
Point-of-Sale Employees, and/or Warehouse Workers can access
real-time information while
dealing
with
patients, serving
customers, and/or processing information.
• Frequently Changing Environments: Set
up networks in
environments that change frequently (i.e.: Show Rooms,
Exhibits, etc.).
• Small Office and Home Office (SOHO) Networks: SOHO users
require a cost-effective, easy, and quick installation of a small
network.
• Wireless Extensions to Existing Ethernet-based Networks:
Devices like the SWE 2220 enable network administrators,
installers, and end-users to extend the range and reach of
an existing Ethernet-based network.
Technical Specifications
Standard:
Security
IEEE802.11b/g/n on 2.4 GHz
WEP (64/128bit)
IEEE 802.11ac/a on 5 GHz
WPA/WPA2 (TKIP/AES)
IEEE802.3at
Hidden ESSID
Antenna
MAC address filtering, up to 50 fields
Four Internal 5 dBi Omni-Directional Antennas
L2 Isolation
802.1X Authenticator (MD5/TLS/TTLS/PEAP)
Physical Interface
Guest Network
1 x 10/100/1000 Gigabit Ethernet Port
1 x Reset Button
QoS (Quality of Service)
1 x Power Connector
WMM (Wireless Multimedia)
LED Indicator
Physical/Environment Conditions
Power
Operating:
WPS
Temperature: 32°F to 104°F (0°C to 40°C)
WLAN (Wireless Connection)
Humidity (Non-condensing): 90% or less
LAN
Storage:
Temperature: -4°F to 140°F (-20°C to 60 °C)
Power Requirements
Humidity (Non-condensing): 90% or less
External Power Adapter
DC IN, 12V/2A
Operation Modes
Access Point
WDS AP WDS
Bridge
Physical Interface
Dimensions and Weights
Diameter: 6.36”
Height: 2.17”
1 Reset Button: Press and hold for over 10 seconds to reset
to factory default settings.
2 LED Indicators: LED lights for WPS, WLAN 5G, WLAN 2.4G,
Ethernet port, and Power
3 LAN Port (802.3at PoE): Ethernet port for RJ-45 cable.
4 Power Connector: 12V DC IN for Power.
5 Ceiling (Wall) Mount Hole: Using the provided hardware, the
SWE 2220 can be attached to a ceiling or wall.
6 Kensington Security Slot: To protect your SWE 2220, use the
Kensington Security Slot to attach a cable lock.
Before You Begin
This section will guide
Considerations for Wireless Installation
you through the
installation process. The operating distance of all wireless devices can often not be
Placement of the Siselectron SWE 2220 is essential to maximize pre-determined due to a number of unknown obstacles in the
the Access Point’s performance. Avoid placing the SWE 2220 in an environment in which the device is deployed. Obstacles such as the
enclosed space such as a closet, cabinet, or stairwell.
number, thickness, and location of walls, ceilings, or other objects that
the SWE 2220’s wireless signals must pass through can weaken the
signal. Here are some key guidelines for allowing the SWE 2220 to
have an optimal wireless range during setup.
• Keep the number of walls and/or ceilings between the SWE 2220
and other network devices to a minimum. Each wall and/or ceiling
can reduce the signal strength, resulting in a lower overall signal
strength.
• Building materials make a difference. A solid metal door and/or
aluminum stubs may have a significant negative effect on the
signal strength of the SWE 2220. Locate your wireless devices
carefully so the signal can pass through drywall and/or open
doorways. Materials such as glass, steel, metal, concrete, water
(example: fish tanks), mirrors, file cabinets, and/or brick can also
diminish wireless signal strength.
• Interference from your other electrical devices and/or appliances
that generate RF noise can also diminish the SWE 2220’s signal
strength. The most common types of devices are microwaves or
cordless phones.
Computer Settings
Windows XP/Windows 7/Windows 8
1b. In Windows 8, move your mouse to the lower right hot corner to
display the Charms Bar and select the Control Panel.
In order to use the SWE 2220, you must first configure the
TCP/IPv4 connection of your Windows OS computer system.
1a. In Windows XP and Windows 7, click the Start button and open
the Control Panel.
Windows 8
2a. In Windows XP, click on Network Connections.
Windows XP
Windows 7
2b.In Windows 7 and Window 8, click View Network Status and Tasks
in the Network and Internet section, then
Settings.
select Change Adapter
5. Select Use the following IP address and enter an IP address
3. Right click on Local Area Connection and select Properties.
that is different from the SWE 2220 and Subnet mask, then click
OK.
Note: Ensure that the IP address and Subnet mask are on the
same subnet as the device.
For example: SWE 2220 IP address: 192.168.1.1
PC IP address: 192.168.1.2 – 192.168.1.255
PC Subnet mask: 255.255.255.0
4. Select Internet Protocol Version 4 (TCP/IPv4) and then select
Properties.
Apple Mac OS X
4. In Configure IPv4, select Manually.
1. Go to System Preferences (it can be opened in the
5. Enter an IP address that is different from the SWE 2220 and
Applications folder or by electing it in the Apple Menu).
Subnet mask, then click OK.
2. Select Network in the Internet & Network section.
Note: Ensure that the IP address and Subnet mask are on the
same subnet as the device.
For example: SWE 2220 IP address: 192.168.1.1
PC IP address: 192.168.1.2 – 192.168.1.255
PC Subnet mask: 255.255.255.0
6. Click Apply when finished.
3. Highlight Ethernet.
Hardware Installation
1. Ensure that the computer in use has an Ethernet Controller
port (RJ-45 Ethernet Port). For more information, verify with your
computer’s user manual.
2. Connect one end of the Category 5e Ethernet cable into the RJ45 port of the SWE 2220 and the other end to the RJ-45 port
of the computer. Ensure that the cable is securely connected to
both the SWE 2220 and the computer.
3. Connect the Power Adapter DC connector to the DC-IN port of
the SWE 2220 and the Power Adapter to an available electrical outlet.
Onceboth connections are secure, verify the following:
a) Ensure that the POWER light is on (it will be orange).
b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will be blue for
2.4G, and green for 5G).
c) Ensure
that
the
LAN
(Computer/SWE 2220
Connection) light is on (it will be blue).
d) Once all three lights are on, proceed to set up the
Access Point using the computer.
10
This diagram depicts the hardware configuration.
Mounting the SWE 2220
Using the provided hardware, the SWE 2220 can be
Leave enough of the screws exposed to ensure that the
attached to a ceiling or wall.
unit can be attached to the mounting bracket.
To attach the
SWE 2220 to a ceiling
If extra space
or wall using the
is required,
screws from the
mounting bracket:
1. Attach the mounting bracket to the wall or ceiling using the
spacers and long
T-Rail mounting hardware kit to increase the
space between the unit and the mounting bracket.
3. Mount
provided wall/ceiling mounting hardware kit.
use the provided
the
SWE 2220
on
the
mounting bracket
by
rotating the unit clockwise about 90 degrees to secure it in
2. Insert the provided short screws into the bottom cover of
place.
the SWE 2220.
11
Attaching the SWE 2220 to a ceiling using the
provided T-Rail connectors:
1. Attach the T-Rail connectors to the bottom cover of the SWE 2220
2.
Line up the connected T-Rail connectors with an appropriately
using the provided short screws.
sized rail and press the unit onto the rail until it snaps into place.
Note: Two sizes of T-Rail connectors are included in the mounting
Note: To protect your SWE 2220, use the Kensington Security
hardware kit: 15/16in (2.38cm) and 9/16in (1.43cm). If extra space
Slot to attach a cable lock (cable lock is not included).
is required to accommodate drop ceiling tiles, use the provided
spacers and long screws.
P2.6*25 Screw
P2.6*10 Screw
Clip
T-Rail
Clips
Clip
12
Configuring Your Access Point
This section will show you how to configure the device using the
2. The default username and password are: admin. Once you have
entered the correct username and password, click the
web-based configuration interface.
button to open the web-based configuration page.
Default Settings
Please use your Ethernet port or wireless network adapter to
connect the Access Point.
IP Address 192.168.1.1
Username/Password admin/admin
Web Configuration
3. If successful, you will be logged in and see the
1. Open a web browser (Internet Explorer/Firefox/Safari)
SWE 2220 User Menu.
and enter the IP Address http://192.168.1.1.
Note: If you have changed the default LAN IP Address of the Access
Point, ensure you enter the correct IP Address.
13
Login
The SWE 2220 has the ability to operate in various modes. This chapter describes the operating modes of the SWE 2220.
Access Point Mode
In Access Point Mode, the SWE 2220 behaves like a central connection for stations or clients that support IEEE 802.11ac/a/b/ g/n networks. The
stations and clients must be configured to use the same SSID (Service Set Identifier) and security password to associate with the SWE 2220. The
SWE 2220 supports up to eight (8) SSIDs per band (16 total) at the same time for secure access.
14
WDS AP Mode
The SWE 2220 also supports WDS AP mode. This operating mode allows wireless connections to the SWE 2220 using WDS technology. In
this mode, configure the MAC addresses in both Access Points to enlarge the wireless area by enabling WDS Link settings. WDS supports up to
four (4) AP MAC addresses.
15
WDS Bridge Mode
In WDS Bridge Mode, the SWE 2220 can wirelessly connect different LANs by configuring the MAC address and security settings of each SWE
2220 device. Use this mode when two wired LANs located a small distance apart want to communicate with each other. The best solution is to
use the SWE 2220 to wirelessly connect two wired LANs, as shown in the following figure.
WDS Bridge Mode can establish up to four (4) WDS links, creating a star-like network.
Note: WDS Bridge Mode does not act as an Access Point because Access Points linked by WDS use the same frequency channel. More
Access Points connected together may lower throughput. This configuration can also be susceptible to generate endless network
loops in your network, so it is recommended to enable the Spanning Tree function to prevent this from happening. You can find
information about the Spanning Tree Function on page 31.
16
Overview
The Overview section contains the following options:
• Device Status
• Connections
The following sections describe these options:
•
The LAN Information section under the Connections link shows
the
Local Area Network
settings such as the LAN IP Address,
Subnet mask, Gateway, DNS Address,
DHCP Client, and STP status.
Device Status
Clicking the Device Status link under the Overview menu shows the
status information about the current operating mode.
•
The
Device
information
Status
section shows
general
such as Device Name, MAC address, Current Time,
Firmware Version, and Management VLAN ID
Note: VLAN ID is only applicable in Access Point or WDS
17
system
•
The Current 2.4 GHz/5 GHz Wireless Settings section under the
Basic link shows wireless information such as Operating Mode,
Frequency, and Channel. Since the SWE 2220 supports multipleSSIDs, information
about each SSID and security settings are
displayed.
Note: Profile Settings is only applicable in Access Point or WDS
AP mode.
18
Connections
The
SWE 2220
automatically logs
(records)
events of possible
interest in its internal memory. To view the logged information, click
the Connections link under the Device Status menu. If there is not
enough internal memory to log all events, older events are deleted
from the log. When powered down or rebooted, the log will be cleared.
Click Refresh to refresh the Connections List
Operation Modes
The SWE 2220 supports three operating modes: Access
Operation Mode: Use the radio button to select an operating mode.
Point, WDS AP, and WDS Bridge.
Band
to
Device Settings
the
Steering: Enable Band Steering to sends 802.11n clients
5 GHz band,
where 802.11b/g clients cannot go, and
leaves the 802.11b/g clients in 2.4 GHz to operate at their slower
rates. Band Steering works within the Access Point by directing 5
GHz-capable clients to that band.
*Note: In order for the Band Steering function to work properly,
both the 2.4 Ghz and the 5 GHz SSID and security settings must be
under the same selection settings.
Basic
This page
To access operation mode, click the Wireless section under Network
in
the
sidebar.
You will see
wireless settings customizable
options for both the 2.4 GHz and 5 GHz modes. Under Wireless
settings, you will see:
Device Name: Enter a name for the device. The name you type
appears in SNMP management. This name is not the SSID and is not
broadcast to other devices.
20
allows you to modify the
device’s IP settings.
IP Network Settings
Select
whether the
address
device
specified in the
IP address will use
IP Address
field
the
static IP
or be
obtained
automatically when the device connects to a DHCP server.
IP Address: The IP Address of this device.
Spanning Tree Status: Enables or disables the Spanning
IP Subnet Mask: The IP Subnet mask of this device. Gateway:
Tree function.
The Default Gateway of this device. Leave it
Hello Time: Specify Bridge Hello Time, in seconds. This value determines how
blank if you are unsure of this setting.
often the device sends handshake packets to communicate information
Primary/Secondary DNS: The primary/secondary DNS
about the topology throughout the entire Bridged Local Area Network.
address for this device.
Click Saveto confirm the changes.
Max Age: Specify Bridge Max Age, in seconds. If another bridge in
the spanning tree does not send a hello packet for a long period of time,
it is assumed to be inactive.
Spanning Tree Settings
This page allows you to modify the Spanning Tree settings. Enabling
Spanning Tree protocol will prevent network loops in your LAN
network.
21
Forward Delay: Specifes Bridge Forward Delay, in seconds. Forwarding
Delay Time is the
time
spent in each
of the Listening
and
Learning states before the Forwarding state is entered. This delay is
provided so that when a new bridge
comes onto a busy network, it analyzes data traffic before
participating.
Priority: Specify the Priority Number. A smaller number has greater
priority.
Save: Click Save to confirm the changes.
22
Wireless Network
This page displays the current status of the Wireless settings
Channel/Frequency: Select the channel and frequency appropriate
of the SWE 2220.
for your country’s regulation.
Access Point/WDS AP mode:
Note: Operations in the 5.15GHz-5.35GHz band are restricted to
indoor
usage only in Hong Kong
Auto: Check this option to the enable the Auto-Channel feature.
RTS/CTS Threshold: Specifies the threshold package size for RTC/CTS.
A small number causes RTS/CTS packets to be sent more often and
consumes more bandwidth.
Client Limits: Limits the total number of clients.
Aggregation: Merges data
packets into one packet.
This option
reduces the number of packets, but also increases packet sizes.
Wireless Mode: Supports 802.11b/g/n mixed mode in
AP Detection: AP Detection can select the best channel to use by
2.4GHz and 802.11ac/a/n mixed mode in 5GHz.
scanning nearby areas for Access Points.
Channel HT Mode: The default channel bandwidth is 20/40/80MHz.
The larger the channel, the better the transmission quality and
Current Profile: You can configure up to eight different SSIDs (4 in
WDS AP mode). If multiple client devices
speed.
will be accessing the
network, you can arrange the devices into SSID groups. Click Edit to
Extension Channel: Select Upper or Lower channel. Your selection
configure the
may affect the Auto Channel function.
SSIDs.
profile and check whether you wish to enable extra
Save: Click Save to confirm the changes.
23
2.4GHz/5 GHz SSID Profile
Under Wireless Settings, you can edit the SSID profile to fit your
needs. Click Edit under the SSID you would like to make changes to.
Wireless Security: See the Wireless Security section on page 36.
Isolation: Check the box to Enable or Disable the Isolation feature.
Save: Click Save to accept the changes.
SSID: Specifies the SSID for the current profile.
Suppressed SSID: Check this option to hide the SSID from clients. If
checked, the SSID will not appear in the site survey.
Station Separation: Click the
appropriate button to allow or
prevent communication between client devices.
24
Wireless Security
The Wireless Security
section
WEP Encryption:
lets
you configure the
SWE 2220’s security modes: WEP
WPA-PSK
WPA2-PSK
WPA-PSK
Mixed
WPA-Enterprise
WPA2-Enterprise
Auth Type: Select Open System or Shared Key. Input
WPA Mixed Enterprise.
It is strongly recommended that you use WPA2-PSK. Click on the Edit
button under Wireless Settings next
to the SSID to change
Type: ASCII: Regular Text (Recommended) HEX: Hexadecimal
the Numbers (For advanced users)
security settings.
Key Length: Select the desired option and ensure the wireless
clients use the same setting. Your choices are: 64,
128, and 152-bit password lengths.
Default Key: Select the key you wish to be default. Transmitted
data is ALWAYS encrypted using the Default Key; the other Keys are
for decryption only. You must enter a Key Value for the Default Key.
25
Encryption Key: Enter the Key Value or values you wish to use. The
WPA2-PSK Encryption:
default is none.
WPA-PSK (WPA Pre-Shared Key) Encryption:
Encryption: Select the WPA encryption type you would like to use.
Please ensure that your wireless clients use the same settings.
Passphrase: Wireless clients
must
use
the
same
Key to
associate the device. If using ASCII format, the Key must be from 8
Encryption: Select the WPA encryption type you would like to use.
Please ensure that your wireless clients use the same settings.
Passphrase: Wireless clients must use the same Key to associate
the device. If using ASCII format, the Key must be from 8 to 63
characters in length.
If using
HEXformat, the Key must be 64 HEX
characters in length.
Group Key Update Interval: Specify how often, in seconds, the Group
Key changes.
26
to 63 characters in length. If using HEXformat, the Key must be 64
HEX characters in length.
Group Key Update Interval: Specify how often, in seconds,
the Group Key changes.
WPA-PSK Mixed Encryption:
WPA-Enterprise Encryption:
Encryption: Select the WPA encryption type you would like to use.
Please ensure that your wireless clients use the same settings.
Passphrase: Wireless clients must use the same Key to associate
the device. If using ASCII format, the Key must be from 8 to 63 Encryption: Select the WPA encryption type you would like. Please
characters in length.
If using
HEXformat, the Key must be 64 HEX ensure that your wireless clients use the same settings.
characters in length.
Group Key Update Interval: Specify how often, in seconds, the group
Group Key Update Interval: Specify how often, in seconds, the group
key changes.
key changes.
Radius Server: Enter the IP address of the Radius server.
Radius Port: Enter the port number used for connections to the
Radius server.
Radius Secret: Enter the secret required to connect to the
Radius server.
Radius Accounting: Enables or disables the
27
accounting feature.
WPA2Enterprise Encryption:
Radius Accounting Server: Enter the IP address of the
Radius accounting server.
Radius Accounting Port: Enter the port number used for
connections to the Radius accounting server.
Radius Accounting Secret: Enter the secret required to connect
to the Radius accounting server.
Interim Accounting Interval: Specify how often,
in seconds,
the accounting data sends.
Note:
Encryption: Select the WPA encryption type you would like. Please
802.11n does not allow WEP/WPA-PSK TKIP/ WPA2-PSK
ensure that your wireless clients use the same settings.
TKIP security mode. The connection mode will automatically
Group Key Update Interval: Specify how often, in seconds, the group
change from 802.11n to 802.11g.
key changes.
Radius Server: Enter the IP address of the Radius server.
Radius Port: Enter the port number used for connections to the
Radius server.
Radius Secret: Enter the secret required to connect to the
Radius server.
Radius
Accounting: Enables
accounting feature.
28
or disables
the
Radius
Radius
Accounting Server: Enter
the
IP address of the
WPA Mixed Enterprise Encryption:
Radius accounting server.
Radius
Accounting Port:
Enter the
port number
used for
connections to the Radius accounting server.
Radius Accounting Secret:
Enter the secret required to
connect to the Radius accounting server.
Interim Accounting Interval: Specify how often,
in seconds,
the accounting data sends.
Note:
802.11n does not allow
Encryption: Select the WPA encryption type you would like. Please
WEP/WPA-PSK TKIP/ WPA2-PSK
ensure tha your wireless clients use the same settings.
TKIP security mode. The connection mode will automatically
Group Key Update Interval: Specify how often, in
change from 802.11n to 802.11g.
seconds, the group key changes.
Radius Server:
Radius
Port:
Enter the IP address of the Radius server.
Enter the
connections to the Radius
port number
used
for
server.
Radius Secret: Enter the secret required to connect to the
Radius server.
Radius Accounting: Enables or disables the Radius
accounting feature.
29
Radius Accounting Server: Enter the IP address of the Radius
accounting server.
Hidden SSID: Check this option
Radius Accounting Port: Enter the port number used for
Client Isolation: Click the appropriate radio button to allow
Radius Accounting Secret: Enter the secret required to
or prevent communication between client devices.
connect to the Radius accounting server.
Interim Accounting Interval: Specify how often, in seconds,
the accounting data sends.
The
IP address: The IP Address of this device. Subnet Mask:
The IP Subnet mask of this device.
Note: 802.11n does not allow WEP/WPA-PSK TKIP/ WPA2-PSK
mode.
to hide SSID from clients, If
checked, this SSID will not appear in the AP detect.
connections to the Radius accounting server.
TKIP security
SSID: Specified the SSID for the current profile.
connection mode
will
automatically change from 802.11n to
Starting IP Address: The first IP Address in the range of the
addresses by the DHCP server.
Ending IP Address: The last IP Address in the range of addresses
802.11g.
assigned by the DHCP server.
Guest Network Settings
Adding a guest network to allow visitors to use the internet
without giving out your office or company wireless security.
You can add a guest network to each wireless network in the
2.4GHz frequencies and 5GHz frequencies.
30
Fast Handover
Fast Roaming
Enable
Enable
the
Fast
Handover feature by ensuring that each
client is served by at least
one Access Point at any time.
the
function
serve mobile client
to
roam from access point to access point. Some applications
Access Points continuously monitor the connectivity quality of
roam on client devices
any client in their range and efficiently share this information
they roam to a different access point.
with other Access Points
in the
vincinity of that client to
coordinate which of them should serve the client best.
devices that
Please enter
Security
the
mode
require
fast
settings of the
to
re- association when
SSID and
initialize the
WPA-Mixed, WPA2 enterprise, WPA2-PSK,
WPA-Mixed Enterprise as well as to set the RADIUS server firstly.
User can enable Fast Roaming.
Please also set the same encryption under the same SSID on
other
RSSI: Enter the RSSI (Received Signal Strength Index) in order to
determine the handover procedure which the current wireless
access point
configuration
is
and
enable Fast
activated
mobile client devices
on
different access point,
received by the antenna.Therefore, the higher the RSSI number, the
stronger the signal.
31
the
the
can run the voice service and require
seamless roaming to prevent delay
link will terminate. RSSI is an indication of the power level being
Roaming. When
access point to access point.
in
conversation
from
Wireless MAC Filtering
Wireless MAC Filtering is used to allow or deny network access to ACL (Access
wireless clients
according
(computers, tablet
to their
address to restrict
Control
List)
Mode:
Determines whether network
PCs, NAS, smartphones, etc.) access is granted or denied to clients whose MAC addresses appear
MAC addresses. You can manually
add a MAC in the MAC address table on this page. Choices given are: Disabled,
permission to access SWE 2220. The default Deny MAC in the list, or Allow MAC in the list.
setting is: Disable Wireless MAC Filter.
MAC Address: Enter the MAC address of the wireless client.
Note: Only applicable in Access Point and WDS AP mode.
Add: Click Add to add the MAC address to the MAC Address table.
Delete: Deletes the selected entries. Save:
Click Save to apply the changes.
32
Wireless Advanced
This page allows you to configure wireless advanced settings. It is
Data Rate: Select a data rate from the drop-down list. The data rate
recommended that the default settings are used unless the user
affects throughput of data in the SWE 2220. The lower the data rate, the
has experience with more advanced networking features.
lower the throughput, though transmission distance will be lowered as
well.
2.4 GHz/5 GHz Wireless Advanced
Transmit Power: Set the power output of the wireless signal.
RTS/CTS Threshold: Specify the threshold package size for RTC/CTS.
A smaller number causes RTS/CTS packets to be sent more often
and in turn consumes more bandwidth.
Distance: Specify the distance between Access Points and clients.
Longer distances may drop high-speed connections.
Aggregation: Merges data
packets into one packet.
This option
reduces the number of packets, but increases packet sizes.
Save: Click Save to confirm the changes.
WPS (Wi-Fi Protected Setup)
(WPS) feature complies with the Wi-Fi Configured or Unconfigured. When it is configured, the WPS has
Alliance WPS standard and makes it easier to quickly add client been used to authorize a connection between the device and
wireless clients.
devices to an established, security-enabled Wi-Fi network.
The Wi-Fi Protected Setup
WPS reduces the user steps required
supports two
to configure a network and Self Pin Code: The PIN code of this device.
methods that
are familiar to most consumers to SSID: The SSID (wireless
configure a network and enable security.
using WPS.
Note: Only applicable in Access Point and WDS AP
network
name)
used
when connecting
Authentication Mode: Shows the encryption method used by the
mode.
WPS process.
WPS (Wi-Fi Protected Setup)
Passphrase Key: This is the
passphrase key that is randomly
generated during the WPS process. It is required if wireless clients
that do not support WPS attempt to connect to the wireless
network.
WPS via Push Button: Click this button to initialize the
WPS feature using the Push Button method.
WPS via PIN: Enter the PIN code of the wireless device and click
this button to initialize WPS feature using the PIN method.
Save: Click Save to confirm the changes.
WPS: Select to Enable or Disable the WPS feature.
WPS Current Status: Shows whether the WPS function is
34
WDS Link Settings
Using
WDS (Wireless
administrator
wirelessly.
or
2.4 GHz/5 GHz WDS Link Settings
Distribution
installer
Doing so
System)
to
will allow a
connect
will extend the
to Access
network
Points
wired infrastructure to
locations where cabling is not possible or inefficient to implement.
Note:
Compatibility
of Access Points
between different brands
and models
is not guaranteed. It is recommended that the
WDS network be created using the same models for maximum
compatibility.
Also Note: All Access Points in the WDS network must use the
Security: Select None or AES from the drop-down list.
AES Passphrase: Enter the Key Values you wish to use. Other
same Channel and Security settings.
AP(s) must use the same key to establish WDS link.
To create a WDS network, please enter the MAC addresses of the
Access Points that you want included in the WDS. There can be a
maximum of four Access Points.
MAC Address: Enter the Access Point’s MAC address to which you
want to extend the wireless area.
Mode: Select Disable or Enable from the drop-down list. Save:
Note: Only applicable in WDS AP and WDS Bridge modes.
Click Save to confirm the change.
35
Administration
This page allows you to change the SWE 2220 username and password.
Confirm Password: Re-enter the new password in the
By default, the username is admin and the password is admin. The
Confirm Password entry box for confirmation. Apply:
password can contain from 0 to 12 alphanumeric characters and is
case sensitive.
Username: admin
Password: admin
Account Setting
New Name: Enter a new username for logging in to the
New Name entry box.
Old Password: Enter the old password for logging in to the
Old Password entry box.
New Password: Enter the new password for logging in to the New
Password entry box.
Click Apply to save the changes.
Note: it is highly reccomended that you change you
password to something more unique for greater security.
Management VLAN Settings
This page allows you to assign a VLAN tag to the packets. A VLAN is a
group of computers on a network whose software has been
configured so that they behave as if they were on a separate Local
Area Network (LAN). Computers on VLAN do not have to be physically
located next to one another on the LAN.
VLAN ID (VID): Specifies the VLAN tag for each profile. Management
VLAN ID: If your network includes VLANs, you can specify
a VLAN ID for packets pass through the Access Point with
To configure VLAN tags, you must first Isolate and enter a VID
a tag. Otherwise, select no VLAN tag. Save: Click Save to confirm.
before enabling VLAN under Management VLAN ID.
Note: Only applicable in Access Point and WDS AP mode.
Note:
Profile Isolation: Restrict clients from communicating with different
1. If you reconfigure the Management VLAN ID, you may lose your
VIDs by checking the Isolation box for the SSID you wish to select
connection to the SWE 2220. Verify that the DHCP server supports
under the Wireless Settings funtion.
the reconfigured VLAN ID, then reconnect to the SWE 2220 using
the new IP address.
37
Wireless Traffic Shaping
Traffic Shaping regulates the flow of packets leaving an interface to
deliver improved Quality of Service. To edit Wireless Traffic Shaping, click
Edit for the SSID you would like to configure under Wireless Settings.
Enable Traffic Shaping: select this option from the drop- down box
to enable Wireless Traffic Shaping.
Download Limit: Specifies the wireless transmission speed used for
downloading.
Upload Limit: Specifies the wireless transmission speed used for
uploading.
Save: Click Save to confirm the changes.
38
SNMP Settings
This page allows you to assign the Contact Details, Location,
Status: Enables or Disables the SNMP feature. Contact:
Community Name, and Trap Settings for Simple Network Management
Protocol (SNMP). This is a networking management protocol used to
monitor
network attached devices. SNMP allows messages (called
protocol data units) to be sent to various parts of the network. Upon
receiving these messages, SNMP compatible devices (called agents)
Specifies the contact details of the device. Location:
Specifies the location of the device.
Port: Displays the port number.
returns the data stored in their Management Information Bases. To
Community Name (Read Only): Specifies the password for the
configure SNMP Settings, click under the Advanced tab on the side bar
SNMP community for read only access.
under Management.
Community Name (Read/Write): Specifies the password for the
SNMP community with read/write access.
Trap Destination Address: Specifies the port and IP
address of the computer that will receive the SNMP traps.
Trap
Destination
Community Name:
Specifies
the password
for the SNMP trap community.
SNMPv3 Status: Enables or Disables the SNMPv3 feature.
User Name: Specifies the username for the SNMPv3. feature
Auth Protocol: Select the Authentication Protocol type: MDS or
SHA.
AuthKey: Specify the Authentication Key for authentication.
39
Priv Protocol: Select the Privacy Protocol type: DES. Priv Key:
Specifies the privacy key for privacy. Engine ID: Specifies the
Engine ID for SNMPv3.
Save: Click Save to apply the changes.
40
Backup/Restore
Factory Settings
This page allows you to save the current device configurations.
Backup Settings:
To restore settings that
When you save the configurations, you can also reload the saved
previously
up, click Export,
configurations into the device through the
Restore.
Restore Saved
Settings from a file folder.
If extreme problems
occur, or if you have
set
the SWE 2220
incorrectly, you can use the Factory Default button in the Revert
backed
select
the
have
been
file, and click
Restore New Setting: Choose the file you wish restore for
settings and click Import.
to Factory Default Settings section to restore all the configurations Reset to Default: Click the Reset button to restore the
of the SWE 2220 to the original default settings.
SWE 2220 to its factory default settings.
To Configure the Backup/ Restore Settings, click Firmware under
the Systems Manager tab.
User Settings
Back Up Setting as
Default: Click Backup
to backup
the user
settings you would like to use as the default settings.
Restore to User Default: Click Restore to restore user settings
to the factory standard settings.
41
Auto Reboot Settings
You can specify how often you would like to reboot the SWE
2220. To configure the Auto Reboot
settings, click the
Wi-Fi
Scheduler tab on the side bar under Management.
Auto Reboot Setting: Enables or disables the Auto
Reboot function.
Frequency of Auto Reboot: Specifies
the
time and
frequency in rebooting the SWE 2220 by Min, Hour,
Day and/or Week.
Click Save to apply the changes.
42
Firmware Upgrade
Date and Time Settings
This page allows you to upgrade the Firmware of the
This page
SWE 2220.
2220. To access the
allows you to set
the
internal
clock of the SWE
Date and Time settings, click Time Zone
under the Management tab on the side bar.
To Perform the Firmware Upgrade:
1. Click the Choose File button and navigate the OS File
System to the location of the Firmware upgrade file.
Manually Set Date and Time: Manually specify the date and
time.
2. Select the upgrade file. The name of the file will appear in the
Upgrade File field.
3. Click the Upload button to commence the Firmware upgrade.
Note:
and
The device is unavailable during the upgrade process
must
restart when
the
upgrade is completed.
Any
connections to or through the device will be lost.
Synchronize with PC: Click to Synchronize the SWE 2220 with the
computer’s internal clock.
Automatically Get Date and Time: Enter the IP address of an
NTP server or use the default NTP server to have the internal
clock set automatically.
Time Zone: Choose the time zone you would like to use from the
drop-down list.
Enable
43
Daylight
Savings: Check
the
box
to
enable
or
disable daylight savings time for ther SWE 2220. Next, enter the
dates
that correspond to the present year’s daylight savings
time.
Click Apply to save the changes.
would like to remote to.
Log Server IP Address: Enter the IP address of the log server.
Apply:
Click
Apply
to
save
the
changes.
44
System Log
Tools
This page allows you to setup the System Log and local log
This page allows you to analyze the connection quality of the
functions of the SWE 2220. Click Log under the Systems
SWE 2220 and trace the routing table to a target in the network.
Manager tab to open up the System Log page.
Status: Enables or disables the System Log function.
Log Type: Select the Log Type mode you would like to use.
Remote Log: Enables or disables
the Remote
Log feature.
If enabled, enter the IP address of the Log you
45
Ping Test Parameters
Traceroute Parameters
Target
Target IP/Domain Name: Enter an IP address or domain name
IP/Domain Name: Enter the IP address you would
like to search.
you wish to trace.
Ping Packet Size: Enter the packet size of each ping.
Start: Click Start to begin the trace route operation. Stop:
Number of Pings: Enter the number of times you wish to ping.
Halts the traceroute test.
Start Ping: Click Start Ping to begin pinging target device
(via IP).
46
Speed Test Parameters
Target
IP/Domain Name:
Enter
LED Control
an IP address or domain
This page allows you to control the LED control functions: Power
name you wish to run a Speed Test for.
status, LAN interface, 2.4G/5G WLAN interface and WPS.
Time Period/Check Interval: Enter the time in seconds that you
Click Apply to save the settings after selecting your choices
would like the test to run for and in how many intervals.
from the drop-down boxes.
Start: Starts the Speed Test.
47
Device Discovery
Under Device Discovery, you can choose
Automatically scan for local devices
for the SWE 2220 to
to connect to. Click Scan to
begin the process.
Reset
In some circumstances, you may be required to force the device to
reboot. Click on Reboot the Device to reboot the SWE 2220.
48
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from thatto
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 25cm between the radiator & your body.
49
Hereby, Siselectron Technology Ltd. declarates that the SWE 2220 is in compliance with the essential requirements
and other relevants provisions of Directive 1999/5/EC.
Por medio de la presente, Siselectron Technology Ltd. declara que el SWE 2220 cumple con los requisitos esenciales
y cuales quiera otras disposiciones aplicables o exigibles de la directiva 1999/5/CE.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2015:12:29 13:47:51-06:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2016:01:12 11:42:33+08:00
Metadata Date                   : 2016:01:12 11:42:33+08:00
Format                          : application/pdf
Creator                         : Jose Fernando Palma Angulo
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:c94c16ea-e74d-4b05-b6aa-f130e7f7ac08
Instance ID                     : uuid:c65991ba-1914-4bda-8a5e-5002b4026328
Page Count                      : 52
Language                        : es-MX
Author                          : Jose Fernando Palma Angulo

EXIF Metadata provided by EXIF.tools