Siselectron Technology WE2520 Dual Band AC1750 Access Point User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2877361
Application ID	xhc93KOpi53Oc6Ce61h5Eg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	248.51kB (3106357 bits)
Date Submitted	2016-01-19 00:00:00
Date Available	2016-01-20 00:00:00
Creation Date	2015-12-29 14:42:00
Document Lastmod	2016-01-13 10:47:01
Document Title	Users Manual
Document Author:	Jose Fernando Palma Angulo

Table of Contents
Chapter 1
Chapter 7
Key Features/Introduction............................................................ 1
Wireless Network........................................................................ 22
System Requirements / Package Contents .................. 2
Wireless Security......................................................................... 24
Applications...............................................................................................
Wireless MAC Filtering.............................................................. 30
Technical Specifications................................................................... 4
Wireless Advanced .................................................................... 31
Physical Interface................................................................................. 5
WPS (Wi-Fi Protected Setup)............................................. 32
WDS Link Settings........................................................................ 33
Chapter 2
Considerations
for Wireless Installation........................ 6
Chapter 8
Computer
Settings.............................................................................
Hardware
Installation........................................................................ 10
Management VLAN Settings........................................... 35
Mounting the SWE 2520......................................................................... 11
Wireless Traffic Shaping...................................................... 36
Chapter 3
SNMP Settings.............................................................................. 37
Administration..............................................................................
34
13
Backup/Restore Settings................................................... 39
Access Point Mode.......................................................................
14
Firmware Upgrade/TimeSettings..................................... 41
WDS AP Mode....................................................................................
15
WDS Bridge Mode........................................................................
16
Ping Test
Overview...........................................................................................
17
Speed Test Parameters/LED Control......................... 45
Connections....................................................................................
18
Device Discovery/Reset........................................... ..............46
Default Settings............................................................................
Chapter 4
Chapter 5
Chapter 6
Operation Modes/Basic................................................................. 19
IP Settings/SpanningTree Settings.............................. 20
Auto Reboot Settings........................................................... 40
System Log/Tools.......................................................................... 43
Parameters/Traceroute
Parameters ........................................................... ....... 44
Appendix
FCC Interference Statement........................................... 47
can be used with
Introduction
802.3at
capable switches or injectors
Key Features
• High transmit power, enabling long range connectivity
• Supports IEEE802.11ac/b/g/n wireless standards with up to 450 Mbps
data rate on 2.4GHz and 1300Mbps data rate on 5GHz
• Three internal 4 dBi (2.4 GHz) and three 5dBi (5 GHz) omni-directional
MIMO antennas
• Can be used with included power adapter or via PoE with PoE 802.3at capable Switches or Injectors
• Dual Band/Three Stream
• Band Steering shifts dual band clients to the 5 GHz band for to relieve
network congestion on the 2.4 GHz band
• Siselectron Technology Ltd seeks the most efficient signal path to
AC compatible computers and devices
• Secured Guest Network
Introduction
The SWE 2520 leverages the breakthrough speed and performance 802.11ac
performance 802.11ac for connecting to laptops and other devices that need
to wirelessly stream HD video or transfer large files.The SWE 2520 is an
with AC client devices. It can be configured as an Access Point, Client
Bridge, or WDS (AP & Bridge) and features a high transmit RF power of 28
dBm transmit RF power on the 2.4 GHz band and 26 dBm on the 5 GHz band
802.11ac 3x3 Indoor Access Point. This high- powered ceiling mount Dual Band
Access Point features speeds up to 450 Mbps on 2.4 GHz and up to
connecting to 802.3at-capable PoE Switches and an enhanced receive
1300 Mbps on the 5 GHz band when associated
sensitivity NIMO (Multiple In / Multiple Out) Out) integrated sectorized 3D
for long range connectivity. The SWE 2520 includes a Gigabit Ethernet port for
antenna array.
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For Taiwan: Copyright © 2015 Siselectron Technology Ltd. All rights reserved.
It’s an ideal solution for spacious interior environments such as
large homes, small and medium-sized businesses, multiple-floor
buildings, hotels, hospitals, and other venues.
The SWE 2520 also delivers up to 15x faster wireless speeds compared
to legacy 802.11a/b/g wireless devices. Even though the SWE
2520 has been designed and engineered for heavy traffic and
demanding business environments, in larger housing environments
as it can efficiently extend the wireless range of an existing home
router. This makes it especially ideal in architecturally-challenging
structures, providing whole home connectivity.
System Requirements
The following are the Minimum System Requirements in order
configure the device:
•
Windows OS (XP, Vista, 7, 8), Mac OS, or Linux-based
operating systems
•
Web-Browsing Application (i.e. : Internet Explorer,
Firefox, Chrome, Safari, or another similar browser
application)
Package Contents
To protect sensitive data during wireless transmissions, the SWE
2520 offers different encryption settings for wireless transmissions,
including industry standard WPA and WPA2 encryption. The SWE 2520
also includes MAC address filtering to allow network administrators to
Computer with an Ethernet interface or wireless
network capability
•
The SWE 2520 package contains the following items (all items must
be in package to issue a refund):
offer network access only to known computers and other devices
•
SWE 2520 Access Point
based on their MAC addresses.
•
12V/2A Power Adapter
•
RJ-45 Ethernet Cable
•
Quick Installation Guide
•
Ceiling and Wall Mount Screw kit
•
T-Rail Mounting kit
•
Mounting Bracket
Applications
Wireless LAN (WLAN) products are easy to install and highly efficient.
The following list describes some of the many applications made
possible through the power and flexibility of WLANs
• Difficult-to-Wire Environments: There are many situations where
wires cannot be installed, deployed easily, or cannot be hidden
from view. Older buildings, sites with multiple buildings, and/or
areas that make the installation of a Ethernet-based LAN
impossible, impractical or expensive are sites where WLAN can be
a network solution.
• Temporary Workgroups: Create temporary workgroups/networks
in more open areas within a building; auditoriums, amphitheaters
classrooms, ballrooms, arenas, exhibition centers, or temporary
offices where one wants either a permanent or temporary
Wireless LAN established.
• The Ability to Access Real-Time Information: Doctors/Nurses,
Point-of-Sale Employees, and/or Warehouse Workers can access
real-time information while dealing with patients, serving customers,
and/or processing information.
• Frequently Changing Environments: Set up networks in
environments that change frequently (i.e.: Show Rooms,
Exhibits, etc.).
• Small Office and Home Office (SOHO) Networks: SOHO users
require a cost-effective, easy, and quick installation of a small
network.
• Wireless Extensions to Existing Ethernet-based Networks:
Devices like the SWE 2520 enable network administrators, installers,
and end-users to extend the range and reach of an existing
Ethernet-based network.
• Training/Educational Facilities: Training sites at corporations or
students at universities use wireless connectivity to exchange
information between peers and easily access information for
learningpurposes.
Technical Specifications
Standard:
Security
IEEE802.11b/g/n on 2.4 GHz
WEP (64/128bit)
IEEE 802.11ac/a/n on 5 GHz
WPA/WPA2 (TKIP/AES)
IEEE802.3at
Hidden SSID
MAC address filtering, up to 50 fields
Antenna
L2 Isolation
Integrated 3D Sectorized Antenna
802.1X Authenticator (MD5/TLS/TTLS/PEAP)
4 dBi on 2.4 GHz
Guest Network
5 dBi on 5 GHz
QoS (Quality of Service)
WMM (Wireless Multimedia)
Physical Interface
1 x 10/100/1000 Gigabit Ethernet Port
Wireless Management
1 x Reset Button
Web interface (HTTP/HTTPS)
1 x Power Connector
SNMP v1/v2c/v3 with MIB I/II and private MIB CLI
(Telnet/SSH)
LED Indicator
Firmware Upgrade
Power
Backup/Restore Settings
WPS
Save Configuration as Default
WLAN (Wireless
Auto Reboot
Connection) LAN
E-mail Alert/Syslog Notification
Power Requirements
Physical Security
External Power
Kensington Security Slot
Adapter DC IN, 12V/2A
Physical/Environment Conditions
Active Ethernet (Power-over-
Operating:
Ethernet) Proprietary PoE Design
Temperature: 32°F to 104°F (0°C to 40°C)
Humidity (Non-condensing): 90% or less
Operation Modes
Storage:
Access Point
WDS AP
Temperature: -4°F to 140°F (-20°C to 60 °C)
WDS Bridge
Humidity (Non-condensing): 90% or less
Physical Interface
Dimensions and Weights
Diameter: 6.36”
Height: 1.64”
Weight: 0.65 lbs.
1 Reset Button: Press and hold for over 10 seconds to reset
to factory defaults settings
2 LED Indicators: LED lights for WPS, WLAN 5G, WLAN
Ethernet port, and Power
2.4G,
4 Power Connector: 12V DC IN for Power.
5 Ceiling (Wall) Mount Hole: Using the provided hardware, the
SWE 2520 can be attached to a ceiling or wall.
6 Kensington Security Slot: To protect your SWE 2520, use the
Kensington Security Slot to attach a cable lock*.
3 LAN Port (802.3at PoE): Ethernet port for RJ-45 cable.
*cable lock not included
Before You Begin
Considerations for Wireless Installation
This section will guide you through the installation process.
The operating distance of all wireless devices can often not be
Placement of the Siselectron SWE 2520 is essential to maximize the
pre-determined due to a number of unknown obstacles in the
Access Point’s performance. Avoid placing the SWE 2520 in an enclosed
environment in which the device is deployed. Obstacles such as the
space such as a closet, cabinet, or stairwell.
number, thickness, and location of walls, ceilings, or other objects
that the SWE 2520’s wireless signals must pass through can
weaken the signal. Here are some key guidelines for allowing the
SWE 2520 to have an optimal wireless range during setup.
• Keep the number of walls and/or ceilings between the SWE 2520
and other network devices to a minimum. Each wall and/or ceiling
can reduce the signal strength, resulting in a lower overall signal
strength.
• Building materials make a difference. A solid metal door and/or
aluminum stubs may have a significant negative effect on the
signal strength of the SWE 2520. Locate your wireless devices
carefully so the signal can pass through drywall and/or
open doorways. Materials such as glass, steel, metal, concrete,
water (example: fish tanks), mirrors, file cabinets, and/or brick can
also diminish wireless signal strength.
•
Interference from your other electrical
devices
and/or
appliances that generate RF noise can also diminish the SWE
2520’s signal strength. The most common types of devices are
microwaves or cordless phones.
Computer Settings
Windows XP/Windows 7
2b.In Windows 7, click View Network Status and Tasks in the
Network and Internet section, then select
In order to use the SWE 2520, you must first configure the
Change
Adapter Settings.
TCP/IPv4 connection of your Windows OS computer system.
1. Click the Start button and open the Control Panel.
3. Right click on Local Area Connection and select Properties.
Windows XP
Windows 7
2a. In Windows XP, click on Network Connections.
4. Select Internet Protocol Version 4 (TCP/IPv4) and then select
5. Select Use the following IP address and enter an IP address
Properties.
that is different from the SWE 2520 and Subnet mask, then click
OK.
Note: Ensure that the IP address and Subnet mask are on the
same subnet as the device.
For example: SWE 2520 IP address: 192.168.1.1
PC IP address: 192.168.1.2 – 192.168.1.255
PC Subnet mask: 255.255.255.0
Apple Mac OS X
4. In Configure IPv4, select Manually.
1. Go to System Preferences (it can be opened in the
5. Enter an IP address that is different from the SWE 2520
Applications folder or by electing it in the Apple Menu).
and Subnet mask, then click OK.
2. Select Network in the Internet & Network section.
Note: Ensure that the IP address and Subnet mask are on the
same subnet as the device.
For example: SWE 2520 IP address: 192.168.1.1
PC IP address: 192.168.1.2 – 192.168.1.255
PC Subnet mask: 255.255.255.0
6. Click Apply when finished.
3. Highlight Ethernet.
Hardware Installation
1.
Ensure that the computer in use has an Ethernet Controller port
(RJ-45 Ethernet Port). For more information, verify with
your
computer’s user manual.
2. Connect one end of the Category 5e Ethernet cable into the RJ45 port of the SWE 2520 and the other end to the RJ-45 port
of the computer. Ensure that the cable is securely connected
to both the SWE 2520 and the computer.
3. Connect the Power Adapter DC connector to the DC-IN port of
the SWE 2520 and the Power Adapter to an available electrical outlet.
Once both connections are secure, verify the following:
a) Ensure that the POWER light is on (it will be orange).
b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will be blue for
2.4G, and green for 5G).
c) EnsuregthatgthehLANg(Computerg SWE 2520gConnection)
light is on (it will be blue).
d) Once all three lights are on, proceed to set up the
Access Point using the computer.
10
This diagram depicts the hardware configuration.
Mounting the SWE 2520
Using the provided hardware, the SWE 2520 can be attached
to a ceiling or wall.
Leave enough of the screws exposed to ensure that the unit can be
attached to the mounting bracket.
To attach the SWE 2520 to a ceiling or wall using the
mounting bracket:
If extra space is required, use the provided spacers and long screws from
1. Attach the mounting bracket to the wall or ceiling using the
the unit and the mounting bracket.
from the T-Rail mounting hardware kit to increase the space between
provided wall/ceiling mounting hardware kit.
3. Mount the SWE 2520 on the mounting bracket by rotating the unit
clockwise about 90 degrees to secure it in place.
2. Insert the provided short screws into the bottom cover of the
SWE 2520.
Wall
Mounting Screw
Mounting Bracket
P3.5*32 Screw
P2.6*12 Screw
Lock the SWE 2520 by revolving
11
Attaching the SWE 2520 to a ceiling using the
provided T-Rail connectors:
1. Attach the T-Rail connectors to the bottom cover of the SWE 2520
using the provided short screws.
2. Line
up
the
connected
T-Rail
connectors
with
an
appropriately sized rail and press the unit onto the rail until it
snaps into place.
Note: Two sizes of T-Rail connectors are included in the mounting
hardware kit: 15/16in (2.38cm) and 9/16in (1.43cm). If extra space is
required to accommodate drop ceiling tiles, use the provided spacers
Note:
To protect your SWE 2520, use the Kensington Security
Slot to attach a cable lock (cable lock is not included).
and long screws.
T-Rail
P2.6*25 Screw
Clip
Clips
P2.6*10 Screw
Spacer
Clip
12
Configuring Your Access Point
This section will show you how to configure the device using the
web-based configuration interface.
2. The default username and password are: admin. Once you have
entered the correct username and password, click the Login
button to open the web-based configuration page.
Default Settings
Please use your Ethernet port or wireless network adapter to
connect the Access Point.
IP Address 192.168.1.1
Username/Password admin/admin
Web Configuration
3. If successful, you will be logged in and see the
SWE 2520 User Menu.
1. Open a web browser (Internet Explorer/Firefox/Safari)
and enter the IP Address http://192.168.1.1.
Note: If you have changed the default LAN IP Address of the
Access Point, ensure you enter the correct IP Address.
13
The SWE 2520 has the ability to operate in various modes. This chapter describes the operating modes of the SWE 2520.
Access Point Mode
In Access Point Mode, the SWE 2520 behaves like a central connection for stations or clients that support IEEE 802.11a/b/g/n networks. The
stations and clients must be configured to use the same SSID (Service Set Identifier) and security password to associate with the SWE 2520. The
SWE 2520 supports up to eight (8) SSIDs per band (16 total) at the same time for secure access.
14
WDS AP Mode
The SWE 2520 also supports WDS AP mode. This operating mode allows wireless connections to the SWE 2520 using WDS technology. In
this mode, configure the MAC addresses in both Access Points to enlarge the wireless area by enabling WDS Link settings. WDS supports up to
four (4) AP MAC addresses.
15
WDS Bridge Mode
In WDS Bridge Mode, the SWE 2520 can wirelessly connect different LANs by configuring the MAC address and security settings of each SWE
2520 device. Use this mode when two wired LANs located a small distance apart want to communicate with each other. The best solution is to
use the SWE 2520 to wirelessly connect two wired LANs, as shown in the following figure. WDS Bridge Mode can establish up to four (4) WDS links,
creating a star-like network.
Note: WDS Bridge Mode does not act as an Access Point because Access Points linked by WDS use the same frequency channel. More
Access Points connected together may lower throughput. This configuration can also be susceptible to generate endless network loops
in your network, so it is recommended to enable the Spanning Tree feature to prevent this from happening. You can find information
about the Spanning Tree Function on page 29.
16
Overview
The Overview section contains the following options:
• Device Status
• Connections
The following sections describe these options:
•
The LAN Information section under the Connections link shows
the Local Area Network settings such as the LAN IP Address,
Subnet mask, Gateway, DNS Address, DHCP Client, and STP status.
Device Status
Clicking the Device Status link under the Overview menu shows the
status information about the current operating mode.
•
The Device Status section shows general system information such
as Device Name, MAC address, Current Time, Firmware Version, and
Management VLAN ID.
Note: VLAN ID is only applicable in Access Point or WDS AP mode.
•
The Current 2.4
GHz/5
GHz Wireless Settings section
under the Basic link under the Network menu shows wireless
information such as Operation Modes, Frequency, and Channel.
Since the SWE 2520 supports multiple-SSIDs, information about
each SSID and security settings are displayed.
Note: Profile Settings is only applicable in Access Point or WDS
AP mode.
17
Connections
The SWE 2520 automatically logs (records) events of possible
interest in
its
internal memory.
To
view
the logged
information, click the Connections link under the Device Status
menu. If there is not enough internal memory to log all events,
older events are deleted from the log. When powered down or
rebooted, the log will be cleared.
Click Refresh to refresh the Connections List page.
18
Operation Mode: Select
Operation Modes
an operating mode
from the drop-
down list.
The SWE 2520 supports three operation modes: Access
Band Steering: Enable Band Steering to so
Point, WDS AP, and WDS Bridge.
D e t e c t s and
allows Dual Band clients to shift to the 5 GHz band from the 2.4
GHz band, relieving network congestion and maintain optimal data
Device Settings
traffic flow.
*Note: In order for the Band Steering feature to work properly,
both the 2.4 Ghz and the 5 GHz SSID and security settings must be
configured under the same settings.
Basic
This page
To access operation mode, click the Wireless link under the Network
menu. You will see customizable wireless settings options for both
2.4 GHz and 5 GHz bands. Under Wireless settings, you will see:
Device Name: Enter a name for the device. The name you type will
appear in SNMP management. This name is not the SSID and is not
broadcasted to other devices.
19
allows you to modify the
device’s IP settings.
IP Network Settings
Select whether the device IP address will use the static IP address
specified in the IP Address field or be obtained automatically
when the device connects to a DHCP server.
IP Address: Displays the IP Address of this device.
IP Subnet Mask: Displays the IP Subnet mask of this device. Gateway:
Displays the Default Gateway of this device.
Spanning Tree Status: Enables or disables the Spanning Tree feature
Hello Time: Specifies the Bridge Hello Time, in seconds.
Leave it blank if you are unsure of this setting.
This value determines how often the device sends handshake packets
to communicate information about the topology throughout the
Primary/Secondary DNS: Displays the primary/secondary
DNS address for this device.
entire Bridged Local Area Network.
Click Save to apply the configuration.
Max Age: Specifies the Bridge Max Age, in seconds. If another bridge in
the spanning tree does not send a hello packet for a long period of time,
it is assumed to be inactive.
Spanning Tree Settings
This page allows you to modify the Spanning Tree settings. Enabling
Spanning Tree protocol will prevent network loops in your LAN
network.
20
Forward Delay:
Specifes
the
Bridge Forward
Delay, in seconds.
Forwarding Delay Time is the time spent in each of the Listening
and Learning states before the Forwarding state is entered. This
delay is provided so that when a new bridge comes onto a busy
network, it analyzes data traffic before participating.
Priority: Specifies the Priority Number. A smaller number has a
greater priority.
Save:
Click Save
to confirm the
changes.
21
Channel/Frequency: Select the channel and frequency appropriate
Wireless Network
This page displays the current status of the Wireless settings
for your country’s regulation.
of the SWE 2520.
Auto: Select this option to enable the Auto-Channel feature.
Access Point/WDS AP mode:
RTS/CTS Threshold: Specifies the threshold package size for RTC/CTS.
A smaller number
causes RTS/CTS packets to be sent more often
and consumes more bandwidth.
Client Limits: Limits the total number of clients.
Aggregation: Merges data
packets into one packet.
This option
reduces the number of packets, but also increases packet sizes.
AP Detection: AP Detection can select the optimal channel to use by
scanning nearby areas for Access Points.
Current Profile: You can configure up to eight
in WDS AP mode)
per
band.
If multiple
different SSIDs (4
client devices
will be
accessing the network, you can arrange the devices into SSID groups.
Wireless Mode: Supports 802.11b/g/n mixed mode in 2.4
Click Edit to configure the profile and check whether you
GHz and 802.11ac/a/n mixed mode in 5 GHz.
enable extra SSIDs.
Channel HT Mode: The default channel bandwidth is 20/
Save: Click Save to confirm the changes.
40MHz in 2.4 GHz and 20/40/80MHz in 5 GHz. The larger the
channel, the better the transmission quality and speed.
Extension Channel: Select Upper or Lower channel. Your selection
may affect the Auto Channel feature.
22
wish to
2.4GHz/5 GHz SSID Profile
Under Wireless Settings, you can edit the SSID profile to fit your Wireless Security: See the Wireless Security section on page 34.
needs. Click Edit under the SSID you would like to make changes to.
Isolation: Check the box to Enable or disable the Isolation feature.
Save: Click Save to confirm the changes.
SSID: Specifies the SSID for the current profile.
Suppressed SSID: Check this option to hide the SSID from clients. If
checked, the SSID will not appear in the site survey.
Station Separation: Check this
option
to
allow or prevent
communication between client devices.
23
Wireless Security
The Wireless Security section
WEP Encryption:
lets you configure the security
modes for SWE 2520:
•
WEP
•
WPA-PSK
•
WPA2-PSK
•
WPA-PSK Mixed
•
WPA-Enterprise
•
WPA2-Enterprise
•
WPA Mixed Enterprise.
Auth Type: Select Open System or Shared Key. Input
Type: ASCII: Regular Text (Recommended)
HEX: Hexadecimal Numbers (For advanced users)
Key
Length: Select the desired option and ensure the wireless
It is strongly recommended that you use WPA2-PSK. Click on the Edit
button under Wireless Settings next
to the SSID to configure the clients use the same setting.
Default Key: Select
security settings.
the
Key you wish to be the
Default Key.
Transmitted data is ALWAYS encrypted using the Default Key; the
other Keys are for decryption only. You must enter a Key Value for
the Default Key.
Encryption Key: Enter the Key Value or values you wish to use.
The default is None.
24
WPA-PSK (WPA Pre-Shared Key) Encryption:
WPA2-PSK Encryption:
Encryption: Select the WPA encryption type you would like to use.
Encryption: Select the WPA encryption type you would like to use.
Please ensure that your wireless clients use the same settings.
Please ensure that your wireless clients use the same settings.
Passphrase: Wireless clients must use the same Key to associate
Passphrase: Wireless clients must use the same Key to associate
the device. If using ASCII format, the Key must be from 8~63
the
characters in length. If using HEXformat, the Key must be 64 HEX
device.
If using
characters in length.
ASCII format,
the
Key must be from 8~63
If using HEXformat, the Key must be 64 HEX
characters in length.
Group
Group Key Update Interval: Specify how often, in seconds, the Group
Key changes.
Radius Accounting Server: Enter the IP address of the
Radius accounting server.
Radius
Accounting Port:
characters in length.
Enter
the
port
number
used
for
connections to the Radius accounting server.
Radius Accounting Secret: Enter the secret required
to connect
to the Radius accounting server.
25
Key Update Interval: Specify
the Group Key changes.
how
often,
in seconds,
WPA-Enterprise Encryption:
WPA-PSK Mixed Encryption:
Encryption: Select the WPA encryption type you would like to use.
Please ensure that your wireless clients use the same settings.
Encryption: Select the WPA encryption type you would like. Please
Passphrase: Wireless clients must use the same Key to associate ensure that your wireless clients use the same settings.
the
device.
If using
characters in length.
ASCII format,
the
Key must be from 8~63
If using HEXformat, the Key must be 64 HEX
characters in length.
Group Key Update Interval: Specify how often, in seconds, the Group
Key changes.
Group Key Update Interval: Specify how often, in seconds, the Group
Key changes.
Radius Server: Enter the IP address of the Radius server.
Radius Port: Enter the port number used for connections to the
Radius server.
Radius Secret: Enter the secret required to connect to the
Radius server.
Radius Accounting: Enables or disables the
26
accounting feature.
Interim Accounting Interval: Specify
how often,
WPA2Enterprise Encryption:
in seconds,
the accounting data is sent out.
Note:
802.11n does
not
allow WEP/WPA-PSK TKIP/ WPA2-PSK
TKIP security mode. The connection mode will automatically change
from 802.11n to 802.11g.
Encryption: Select the WPA encryption type you would like. Please
ensure that your wireless clients use the same settings.
Group Key Update Interval: Specify how often, in seconds, the Group
Key changes.
Radius Server: Enter the IP address of the Radius server.
Radius Port: Enter the port number used for connections to the
Radius server.
Radius Secret: Enter the secret required to connect to the
Radius server.
Radius
Accounting: Enables
accounting feature.
27
or disables
the
Radius
Radius
Accounting Server: Enter
the
IP address of the
WPA Mixed Enterprise Encryption:
Radius accounting server.
Radius
Accounting Port:
Enter the
port number
used for
connections to the Radius accounting server.
Radius Accounting Secret: Enter
the
secret required to
connect to the Radius accounting server.
Interim Accounting Interval: Specify how often, in seconds, the
accounting data is sent out.
Note:
802.11n does not allow WEP/WPA-PSK TKIP/ WPA2-PSK
TKIP security mode. The connection mode will automatically
change from 802.11n to 802.11g.
Encryption: Select the WPA encryption type
you would like.
Please ensure that
use
your wireless clients
the same
settings.
Group Key Update Interval: Specify how often, in seconds,
the Group Key changes.
Radius Server: Enter the IP address of the Radius server.
Radius Port: Enter the port number used for connections to the
Radius server.
Radius Secret: Enter the secret required to connect to the
Radius server.
Radius Accounting: Enables or disables the Radius
accounting feature.
28
Radius Accounting Server: Enter the IP address of the
Radius accounting server.
Radius Accounting Port: Enter the port number used for
connections to the Radius accounting server.
Radius Accounting Secret: Enter the secret required to
connect to the Radius accounting server.
Interim Accounting Interval: Specify how often, in seconds,
the accounting data sends.
Note: 802.11n does not allow WEP/WPA-PSK TKIP/ WPA2-PSK
TKIP security mode. The connection mode will automatically
change from 802.11n to 802.11g.
29
Wireless MAC Filtering
ACL (Access
Control
List)
Mode:
Determines whether network
Wireless MAC Filtering is used to allow or deny network access to
access is granted or denied to clients whose MAC addresses appear
wireless clients (computers, tablet PCs, NAS, smartphones, etc.)
in the MAC address table on this page. Choices given are: Disabled,
according
Deny MAC in the list, or Allow MAC in the list.
to their MAC addresses. You can manually add a MAC
address to restrict permission to access SWE 2520. The default
MAC Address: Enter the MAC address of the wireless client you wish
setting is: Disable Wireless MAC Filter.
to configure for.
Note: Only applicable in Access Point and WDS AP mode.
Add: Click Add to add the MAC address to the MAC Address table.
Delete: Deletes the selected entries. Save:
Click Save to apply the changes.
30
Wireless Advanced
This page
for the
are used
allows
you to configure advanced wireless settings Data Rate: Select a data rate from the drop-down list. The data rate
SWE 2520. It is recommended that
unless the
user
has
the default settings affects throughput of data
in the SWE 2520. The lower the data
experience with more advanced rate, the lower the throughput, though transmission distance will be
networking features.
lowered as well.
2.4 GHz/5 GHz Wireless Advanced
Transmit Power: Sets the power output of the wireless signal.
RTS/CTS Threshold: Specifies the threshold package size for RTC/CTS.
A smaller number causes RTS/CTS packets to be sent more often and
in turn consumes more bandwidth.
Distance: Specifies
clients.
the
distance between Access
Points and
Longer distances may drop high-speed connections.
Aggregation: Merges data
packets into one packet.
This option
reduces the number of packets, but increases packet sizes.
Save: Click Save to confirm the changes.
31
WPS (Wi-Fi Protected Setup)
The Wi-Fi Protected Setup
(WPS) feature complies with the Wi-Fi
Alliance WPS standard and makes
it easier to quickly add client
supports two
methods that
been
used
the WPS has
to authorize a connection between the device and
wireless clients.
devices to an established, security-enabled Wi-Fi network.
WPS reduces the user steps required
Configured or Unconfigured. When it is configured,
to configure a network and Self Pin Code: The PIN code for this device.
are familiar to most consumers to
configure a network and enable security.
SSID: The SSID (wireless
network
name)
used
when connecting
using WPS.
Note: Only applicable in Access Point and WDS AP
Authentication Mode: Displays the
mode.
encryption method used by
the WPS process.
WPS (Wi-Fi Protected Setup)
Passphrase Key: This is the
passphrase key that is randomly
generated during the WPS process. It is required if wireless clients
that do not support WPS attempt to connect to the wireless
network.
WPS via Push Button: Click the Start button to initialize the WPS
feature using the Push Button method.
WPS via PIN: Enter the PIN code for the wireless device and click
this button to initialize WPS feature using the PIN method.
Save: Click Save to confirm the changes.
WPS: Select to enable or disable the WPS feature.
WPS Current Status: Shows whether the WPS feature is
32
WDS Link Settings
Using
WDS (Wireless
administrator
wirelessly.
or
2.4 GHz/5 GHz WDS Link Settings
Distribution
installer
Doing so
System)
to
will allow a
connect
will extend the
to Access
network
Points
wired infrastructure to
locations where cabling is not possible or inefficient to implement.
Note:
Compatibility
of Access Points
between different brands
and models
is not guaranteed. It is recommended that the
WDS network be created using the same models for maximum
compatibility.
Security: Select None or AES from the drop-down list.
Also Note: All Access Points in the WDS network must use the
same Channel and Security settings.
AES Passphrase: Enter the
Key Values
you wish to use. Other
Access Points must use the same Key to establish a WDS link.
To create a WDS network, please enter the MAC addresses of the
Access Points that you want included in the WDS network. There
can be a maximum of four (4) Access Points.
MAC Address: Enter the Access Point’s MAC address to which you
want to extend the wireless area.
Mode: Select Disable or Enable from the drop-down list. Save:
Note: Only applicable in WDS AP and WDS Bridge modes.
Click Save to confirm the changes.
33
Administration
This page
allows you to change
the
SWE 2520
username and Apply: Click Apply to save the changes.
password. By default, the username is admin and the password is
admin.
The password can contain
from 0~12 alphanumeric
characters and is case sensitive.
Username: admin
Password: admin
Account Settings
New Name: Enter a new username for logging in to the
New Name field.
Current Password: Enter the current password for logging in to the
Current Password field.
New Password: Enter the new password for logging in to the New
Password field.
Confirm Password: Re-enter the new password in the
Confirm Password field for confirmation.
34
Note: it is highly reccomended that you change you
password to something more unique for greater security.
Management VLAN Settings
Management VLAN ID: If your network includes VLANs, you can
This page allows you to assign a VLAN tag to the packets. A VLAN is a specify a VLAN ID for packets pass through the Access Point with a
group of computers on a network whose software has been tag. Otherwise, select No VLAN Tag.
configured so that they behave as if they were on a separate Local
Save: Click Save to confirm the changes.
Area Network (LAN). Computers on VLAN do not have to be physically
located next to one another on the LAN.
Note:
If you reconfigure the
Management VLAN ID, you may lose
your connection to the SWE 2520. Verify that the DHCP server
supports the reconfigured VLAN ID, then reconnect to the
SWE 2520 using the new IP address.
To configure VLAN tags, you must first isolate and enter a VID before
enabling a VLAN under the Management VLAN ID.
Note: Only applicable in Access Point and WDS AP mode.
Profile Isolation: Restrict clients from communicating with different
VIDs by checking the Isolation box for the SSID you wish to select
under the Wireless Settings funtion.
VLAN ID (VID): Specifies the VLAN tag for each profile.
Wireless Traffic Shaping
Traffic Shaping regulates the flow of packets leaving an interface to
deliver improved Quality of Service. To edit Wireless Traffic Shaping,
click Edit for the SSID you would
like to configure under Wireless Settings.
Enable Traffic Shaping: select this option from the drop- down list
to enable Wireless Traffic Shaping.
Download Limit: Specifies the wireless transmission speed used for
downloading. The range is from 1~999.
Upload Limit: Specifies the wireless transmission speed used for
uploading. The range is from 1~999.
Save: Click Save to confirm the changes.
36
SNMP Settings
Status: Enables or disables the SNMP feature. Contact:
This page allows you to assign the Contact Details, Location, Community
Name, and Trap Settings for Simple Network Management Protocol
(SNMP). This
is
networking management protocol
monitor
network attached devices.
protocol
data
used
to
SNMP allows messages (called
units) to be sent to various parts
of the network.
Specifies the contact details of the device. Location:
Specifies the location of the device.
Port: Displays the port number.
stored in their Management Information
Community Name (Read Only): Specifies the password for the
SNMP community for read only access.
Bases. To configure SNMP Settings, click under the Advanced link under
Community Name (Read/Write): Specifies the password for the
Upon receiving these messages, SNMP compatible
agents) returns the data
devices
(called
the Management section.
SNMP community with read/write access.
Trap Destination Address: Specifies the port and IP
address of the computer that will receive the SNMP traps.
Trap
Destination
Community Name:
Specifies
the password
for the SNMP trap community.
SNMPv3 Status: Enables or disables the SNMPv3 feature.
User Name: Specifies the username for the SNMPv3. feature.
Auth Protocol: Select the Authentication Protocol type: MDS or
SHA.
Aut h f Ke y :f Sp eci fi e s hthehA u t h en t i c a ti o n h Ke yhf or
authentication.
37
Priv Protocol: Select the Privacy Protocol type you would like to
use.
Priv Key: Specifies the Privacy Key.
Engine ID: Specifies the Engine ID for SNMPv3. Save: Click
Save to apply the changes.
38
Backup/Restore Settings
This page
allows you to save
Factory Settings
the
current device configurations. Backup Settings:
When you save custom configurations, you can also reload the previously
saved
configurations into the device
Saved
Settings section from a file folder. If extreme problems
occur, or if you have
set
the
through the
SWE 2520
incorrectly,
2520
have
up, click Export,
file, and click
select
the
been
Restore Restore.
you can
use the Factory Default button in the Revert to Factory Default
Settings section to restore all the
backed
To restore settings that
Restore New Setting: Choose the file you wish restore for
settings and click Import.
configurations of the SWE Reset to Default: Click the Reset button to restore the
to its original default settings and reload your custom SWE 2520 to its factory default settings.
configuration
for
more
Backup/Restore Settings,
convenience.
To
Configure
click Firmware under
the
the
Systems
User Settings
Back Up Setting as
Manager section.
Default: Click Backup
to backup
the user
settings you would like to the device’s memory for the default
settings.
Restore to User Default: Click Restore to restore user settings
to the factory standard settings.
39
Auto Reboot Settings
You can specify how often you would like to reboot the SWE
2520. To configure the Auto Reboot settings, click the
Wi-Fi
Scheduler tab on the side bar under Management.
Status: Enables or disables the Auto Reboot feature.
Timer: Specifies the time and frequency in rebooting the SWE
2520 by Min, Hour, Day and/or Week.
Click Save to apply the changes.
40
Firmware Upgrade
Date and Time Settings
This page allows you to upgrade the Firmware of the SWE
This page
2520.
2520. To access
Check out siselectron.com.tw
periodicaly for updates.
allows you to set
the
the internal
clock of the SWE
Date and Time settings, click Time Zone
under the Management tab on the side bar.
To Perform the Firmware Upgrade:
1. Click the Choose File button and navigate the OS File
System to the location of the Firmware upgrade file.
2. Select the upgrade file. The name of the file will appear in the
Upgrade File field.
3. Click the Upload button to commence the Firmware upgrade.
Manually Set Date and Time: Manually specify the date and
time.
Synchronize with
PC: Click to
Synchronize
the
SWE 2520 with the computer’s internal clock.
Note: The device is unavailable during the upgrade process and
Automatically Get Date and Time: Enter the IP address of an
must restart when the upgrade is completed. Any connections
NTP server or use the default NTP server to have the internal
to or through the device will be lost.
clock set automatically.
Time Zone: Choose the time zone you would like to use from the
drop-down list.
Enable Daylight Savings: Check the box to enable or disable daylight
savings time for ther SWE 2520. Next, enter the dates that
correspond to the present year’s daylight savings start and end
times.
Apply: Click Apply to save the changes.
42
System Log
Tools
This page allows you to setup the System Log and local log functions This page allows you to analyze the connection quality of the
for the SWE 2520. Click Log under the Systems Manager section to SWE 2520 and trace the routing table to a target in the network.
open up the System Log page.
Status: Enables or disables the System Log function. Log Type:
Select the Log Type mode you would like to
use.
Remote Log: Enables or disables the
Remote Log feature. If
enabled, enter
Log you would like to
the
IP address of the
remote to.
Log Server IP Address: Enter the IP address of the log server.
43
Ping Test Parameters
Target IP/Domain Name: Enter the target IP address you
Traceroute Parameters
would like to search.
Target IP/Domain Name: Enter an IP address or domain name
you wish to trace.
Ping Packet Size: Enter the packet size in bytes for each
ping that will be sent.
Start: Click Start to begin the trace route operation. Stop:
Number of Pings: Enter the number of times you wish to ping.
Halts the traceroute test.
Start Ping: Click Start to begin pinging the target device
(via IP).
44
Speed Test Parameters
Target IP/Domain Name: Enter an IP address or domain name
LED Control
you wish to run a Speed Test for.
This page allows you to control the LED control functions: Power
status, LAN interface, 2.4 GHz/5 GHz WLAN interface and WPS
Time
Period/Check
Interval: Enter the time in seconds that
Click Apply to save the settings after selecting your choices
you would like the test to run for and in how many intervals.
choices from the drop-down list.
Start: Click to start the Speed Test.
45
Device Discovery
Under Device Discovery, you can choose for the SWE 2520 to
Automatically scan for local devices to connect to. Click
Scan to begin the process.
Reset
In some circumstances, you may be required to force the device to
reboot. Click Reset at the top right corner of the dahboard to reboot
the SWE 2520.
46
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 30cm between the radiator & your body.
47
English
Hereby, Siselectron Technology Ltd. declarates that the SWE 2520 is in compliance with the essential
requirementsand other relevants provisions of Directive 1999/5/EC.
Español (Spanish)
Por medio de la presente, Siselectron Technology Ltd. declara que el SWE 2520 cumple con los requisitos esenciales
y cualesquiera otras disposiciones aplicables o exigibles de la directiva 1999/5/CE.
48

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2015:12:29 14:42-06:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2016:01:13 10:47:01+08:00
Metadata Date                   : 2016:01:13 10:47:01+08:00
Format                          : application/pdf
Creator                         : Jose Fernando Palma Angulo
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:db65b746-7606-493b-9a93-6b8c9f196170
Instance ID                     : uuid:24332864-fc67-41ca-ab8c-2eb58e63e4a5
Page Count                      : 50
Language                        : es-MX
Author                          : Jose Fernando Palma Angulo

EXIF Metadata provided by EXIF.tools