Skidata MCBASIC400 RFID Tag Coder User Manual Coder MC BASIC 400

Skidata AG RFID Tag Coder Coder MC BASIC 400

User manual

ManualCoder MC BASIC 400
Manual and operational description Coder MC BASIC 400 Page 2 © SKIDATA AG, April 2004 SKIDATA AG Technical Documentation Untersbergstrasse 40 A-5083 Gartenau Telephone +43 6246 888 - 0 Telefax +43 6246 888 - 7 Internet http://www.skidata.com e-mail docu@skidata.com Copyright © 2004 by SKIDATA AG. All rights reserved. All information in the following document is protected by copyright law. No part of this document may be reproduced without the written consent of SKI-DATA AG. SKIDATA AG reserves the right to make any changes of specification and other information in this document without further notice. Please note During the compilation of this Technical Documentation, great care has been taken to ensure the accuracy of the information contained in it. However, despite our constant effort to ensure the highest degree of accuracy and comprehensiveness possible, the information provided cannot be guaranteed to be absolutely error-free. Trademarks This documentation may contain representations of registered product or service trademarks owned by SKIDATA AG or third parties, as well as references to proprietary know-how protected by copyright laws or other legal provisions. In any case the intel-lectual property rights remain exclusively with their respective owners. Declaration of Conformity The Coder MC BASIC 400 has been developed, designed and manufactured in accordance with the following EU directive: R&TTE (99/5/EC) 0408 Version April 2004
Coder MC BASIC 400 Manual and operational description © SKIDATA AG, April 2004 Page 3 FCC 15.19: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause un-desired operation. FCC 15.21: IMPORTANT: Any changes to or modifications of Coder MC BA-SIC 400 (all variants) unless expressly approved by SKIDATA™, may void the user's authority to operate this device.
Manual and operational description Coder MC BASIC 400 Page 4 © SKIDATA AG, April 2004 Coder MC BASIC 400 1 Document Management – Version Table Tab. 1: Document Version Table for Installation & Maintenance Instructions Section Document Pages Version Date 1 Coder MC BASIC 400 4 1.0 2004-04-06
Coder MC BASIC 400 1 1 Coder MC BASIC 400 Version 1.0 4 pages Copyright 2004 by SKIDATA AG
1 Coder MC BASIC 400 1.1 Contents Page 2 © SKIDATA AG, Version 1.0 1.1 Contents 1.1 Contents 2 1.2 Electrical connections of the device 3
Coder MC BASIC 400 1 Electrical connections of the device 1.2 © SKIDATA AG, Version 1.0 Page 3 1.2 Electrical connections of the device Fig. 1: Connections Coder MC BASIC 400 Fig. 2: Coder MC BASIC 400
1 Coder MC BASIC 400 1.2 Electrical connections of the device Page 4 © SKIDATA AG, Version 1.0

Navigation menu