Skidata MECH450 RFID Module working on 123 kHz User Manual Cover mechanik450 1 0 en
Skidata AG RFID Module working on 123 kHz Cover mechanik450 1 0 en
Skidata >
User manual
Manual
Mechanics 450
Manual and operational description Mechanics 450
Page 2 © SKIDATA AG, November 2003
SKIDATA AG
Technical Documentation
Untersbergstrasse 40
A-5083 Gartenau
Telephone +43-(0)6246 888 - 0,
Telefax +43-(0)06246 888 - 7
Internet http://www.skidata.com
e-mail docu@skidata.com
Copyright
© 2003 by SKIDATA AG. All rights reserved. All information in the
following document is protected by copyright law. No part of this
document may be reproduced without the written consent of SKI-
DATA AG. SKIDATA AG reserves the right to make any changes
of specification and other information in this document without
further notice.
Please note
During the compilation of this Technical Documentation, great
care has been taken to ensure the accuracy of the information
contained in it. However, despite our constant effort to ensure the
highest degree of accuracy and comprehensiveness possible,
the information provided cannot be guaranteed to be absolutely
error-free.
Trademarks
This documentation may contain representations of registered
product or service trademarks owned by SKIDATA AG or third
parties, as well as references to proprietary know-how protected
by copyright laws or other legal provisions. In any case the intel-
lectual property rights remain exclusively with their respective
owners.
Declaration of Conformity
The Mechanics 450 product family have been developed, de-
signed and manufactured in accordance with the following EU di-
rections:
R&TTE (99/5/EC)
0408
Version November 2003
Mechanics 450 Manual and operational description
© SKIDATA AG, November 2003 Page 3
FCC 15.19:
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause un-
desired operation.
FCC 15.21:
IMPORTANT: Any changes to or modifications of Mechanics 450
(all variants) unless expressly approved by SKIDATA™, may void
the user's authority to operate this device.
Manual and operational description Mechanics 450
Page 4 © SKIDATA AG, November 2003
Mechanics 450 1
Document Management – Version Table
Tab. 1: Document Version Table for Installation & Maintenance Instructions
Section
Document Pages Version Date
1 Mechanics 450 4 1.0 26-11-2003
Mechanics 450 1
1
Mechanics 450
Version 1.0
4 pages
Copyright 2003 by SKIDATA AG
Mechanics 450 1
Electrical connections of the device 1.2
© SKIDATA AG, Version 1.0 Page 3
1.2 Electrical connections of the
device
Coder Mechanism 450 is a component designed for installation in
SKIDATA™ devices. Operating the mechanism without its origi-
nal enclosure or in devices not certified by SKIDATA AG for this pur-
pose is prohibited.
Coder Mechanism 450 must be connected to the appropriate de-
vices by means of the plug-in connectors provided for this pur-
pose. The illustration shows the plug-in ports for the 24V DC
power supply, the 122.88 kHz scanner antenna, and the data
transfer line.
Fig. 1: Connection Coding Unit 450
1 Mechanics 450
1.2 Electrical connections of the device
Page 4 © SKIDATA AG, Version 1.0