Skidata SD605 Radio Transceiver Module User Manual Certifying sd605

Skidata AG Radio Transceiver Module Certifying sd605

Users Manual

Manualsd605
Manual sd605 Page 2 © SKIDATA AG, July 2005 SKIDATA AG Technical Documentation Untersbergstrasse 40 A-5083 Grödig/Salzburg Telephone +43 6246 888-0 Telefax +43 6246 888-7 Internet http://www.skidata.com e-mail docu@skidata.com Copyright © 2005 by SKIDATA AG. All rights reserved. All information in the following document is protected by copyright law. No part of this document may be reproduced without the written consent of SKI-DATA AG. SKIDATA AG reserves the right to make any changes of specification and other information in this document without further notice. Please note During the compilation of this Technical Documentation, great care has been taken to ensure the accuracy of the information contained in it. However, despite our constant effort to ensure the highest degree of accuracy and comprehensiveness possible, the information provided cannot be guaranteed to be absolutely error-free. Trademarks This documentation may contain representations of registered product or service trademarks owned by SKIDATA AG or third parties, as well as references to proprietary know-how protected by copyright laws or other legal provisions. In any case the intel-lectual property rights remain exclusively with their respective owners. Declaration of Conformity The sd605 has been developed, designed and manufactured in accordance with the following EU directive: R&TTE (1999/5/EC) 0408 Version July 2005
Sd605 Manual © SKIDATA AG, July 2005 Page 3 FCC 15.21: IMPORTANT: Any changes to or modifications of the sd605, in-cluding antenna, unless expressly approved by SKIDATA™, may void the user's authority to operate this device. Document Management – Version Table Tab. 1: Document Version Table for Installation & Maintenance Instructions Section Document Pages Version Date 1 sd605 4 1.1 2005-07-28 IMPORTANT: Any changes to or modifications of the sd605, in-cluding antenna, unless expressly approved by SKIDATA™, may void the user's authority to operate this device. The final product should contain labelling according to FCCrequirements.For example:This device complies with Part 15 of the FCC rules. Operation issubject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation. This device contains FCC ID QSS-SD605.This label will be placed on the final product, clearly visible to allpersons exposed to the transmitter.
Manual sd605 Page 4 © SKIDATA AG, July 2005
sd605 1 1 sd605 Version 1.1 4 pages Copyright 2005 by SKIDATA AG
1 sd605 1.1 Contents Page 2 © SKIDATA AG, Version 1.1 1.1 Contents 1.1 Contents 2 1.2 General 3 1.3 sd605 4 1.3.1 front view 4 1.3.2 rear view 4
sd605 1 General 1.2 © SKIDATA AG, Version 1.1 Page 3 1.2 General The sd605 is a Radio Transceiver Module (RFID module) which is designed for installation in SKIDATA devices by SKIDATA AG only. The module is not to be sold as an individual product. The sd605 must be connected to the appropriate devices by means of the plug-in connector provided for this purpose. The il-lustrations show the plug-in boards for 5 V DC power supply and the data transfer line, as well as the plug-in parts for the antennas. It is prohibited to use antennas other as the antennas certified to be used with the sd605.
1 sd605 1.3 sd605 Page 4 © SKIDATA AG, Version 1.1 1.3 sd605 1.3.1 front view 1.3.2 rear view Fig. 1: front view sd605 13 Mhz Ant213 Mhz Ant1125 kHz Ant1Power / RS232125 kHz Ant2 Fig. 2: rear view sd605 Power / RS232 (0 V / 5 V)

Navigation menu