Skidata SD605-E Radio Transceiver Module User Manual Certifying sd605

Skidata AG Radio Transceiver Module Certifying sd605

Users Manual

Download: Skidata SD605-E Radio Transceiver Module User Manual Certifying sd605
Mirror Download [FCC.gov]Skidata SD605-E Radio Transceiver Module User Manual Certifying sd605
Document ID624064
Application IDohL02ojhxRZBNXklBKugBA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize72.55kB (906838 bits)
Date Submitted2006-01-30 00:00:00
Date Available2006-01-30 00:00:00
Creation Date2005-07-27 10:57:10
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2006-01-25 16:54:01
Document TitleCertifying sd605
Document CreatorPScript5.dll Version 5.2.2
Document Author: bebe

sd605 Event
Manual
Manual
Version December 2005
sd605 Event
SKIDATA AG
Technical Documentation
Untersbergstrasse 40
A-5083 Grödig/Salzburg
Telephone
+43 6246 888-0
Telefax
+43 6246 888-7
Internet
http://www.skidata.com
e-mail
docu@skidata.com
Copyright
© 2005 by SKIDATA AG. All rights reserved. All information in the
following document is protected by copyright law. No part of this
document may be reproduced without the written consent of SKIDATA AG. SKIDATA AG reserves the right to make any changes
of specification and other information in this document without
further notice.
Please note
During the compilation of this Technical Documentation, great
care has been taken to ensure the accuracy of the information
contained in it. However, despite our constant effort to ensure the
highest degree of accuracy and comprehensiveness possible,
the information provided cannot be guaranteed to be absolutely
error-free.
Trademarks
This documentation may contain representations of registered
product or service trademarks owned by SKIDATA AG or third
parties, as well as references to proprietary know-how protected
by copyright laws or other legal provisions. In any case the intellectual property rights remain exclusively with their respective
owners.
Declaration of Conformity
The sd605 Event has been developed, designed and manufactured in accordance with the following EU directive:
R&TTE (1999/5/EC)
Page 2
© SKIDATA AG, December 2005
Manual
Sd605
FCC 15.21:
IMPORTANT: Any changes to or modifications of the sd605, including antenna, unless expressly approved by SKIDATA™, may
void the user's authority to operate this device.
IMPORTANT: Any changes to or modifications of the sd605, including antenna, unless expressly approved by SKIDATA™, may
void the user's authority to operate this device.
The final product should contain labelling according to FCC
requirements.
For example:
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. This device contains FCC ID QSS-SD605-E.
This label will be placed on the final product, clearly visible to all
persons exposed to the transmitter.
Canada:
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Document Management – Version Table
Tab. 1: Document Version Table for Installation & Maintenance Instructions
Section Document
Pages
Version
Date
1.1
2005-12-14
sd605
© SKIDATA AG, Dec. 2005
Page 3
Manual
Page 4
sd605 Event
© SKIDATA AG, December 2005
sd605 Event
sd605 Event
Version 1.0
4 pages
Copyright 2005 by SKIDATA AG
1
1.1
Page 2
sd605 Event
Contents
1.1
Contents
1.1
Contents
1.2
General
1.3
1.3.1
1.3.2
sd605 Event
front view
view without heat sink
© SKIDATA AG, Version 1.0
sd605 Event
1.2
General
1.2
General
The sd605 Event is a Radio Transceiver Module (RFID module)
which is designed for installation in SKIDATA devices by
SKIDATA AG only.
The module is not to be sold as an individual product.
The sd605 Event must be connected to the appropriate devices
by means of the plug-in connector provided for this purpose. The
illustrations show the plug-in boards for 24 V DC power supply
and the data transfer line, as well as the plug-in parts for the
antennas. It is prohibited to use antennas other as the antenna
certified to be used with the sd605 Event.
© SKIDATA AG, Version 1.0
Page 3
1
sd605 Event
1.3
sd605 Event
1.3
sd605 Event
1.3.1
front view
Fig. 1: front view sd605 Event
125 kHz Ant1
13 MHz Ant1
Supply, 24 V
LED output
1.3.2
Fig. 2: front view sd605 Event (heat sink removed)
Data Power / RS232
(0 V / 5 V)
Page 4
© SKIDATA AG, Version 1.0

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2005:07:27 10:57:10Z
Modify Date                     : 2006:01:25 16:54:01+01:00
Page Count                      : 8
Creation Date                   : 2005:07:27 10:57:10Z
Mod Date                        : 2005:12:14 13:14:11+01:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : bebe
Metadata Date                   : 2005:12:14 13:14:11+01:00
Creator                         : bebe
Title                           : Certifying sd605
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QSS-SD605-E

Navigation menu