Skuandy SK20130009 Shrapnel User Manual Shrapnel User Guide 20140617

Download:
Mirror Download [FCC.gov]
Document ID	2360497
Application ID	e4fC524Ct0p561jLy3980A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.56kB (244460 bits)
Date Submitted	2014-08-16 00:00:00
Date Available	2014-08-16 00:00:00
Creation Date	2014-08-12 19:20:04
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-08-12 19:20:04
Document Title	Microsoft Word - Shrapnel User Guide 20140617
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

ShrapnelQuick Guide
Quick Start, would like to show visually for first page:
Power On
Power Off
Pairing
Battery Life
Shrapnel User Guide ‐Technical Draft
Main Speaker Controls
Power On
Long press and hold the Power Button. Wait (for up to 3 seconds) for the LED lightto flash magentaand the power
on tone to be played. Do not press any other buttons during this time. When Shrapnel is on, the speaker will look
to connect to up to 2 devices in the paired device list. If no paired devices are available for connection, the
speaker will enter a NOT connected state and the LED will flashred2x every 3 seconds.
Power Off
Long press and hold the power button at any time while the Shrapnel is ON. As the speaker powers off, it will play
the power down tone and the LED will turn magenta. It is recommended to disconnect all Bluetooth streaming
devices before powering off.
Enter Pairing Mode
When the speaker is ON, press and hold the round MFB (main function button) for 5 seconds. You will hear the
voice notification, “pairing”, and the LED will alternatered and blue when pairing mode is entered. When a device
is successfully paired, the LED will flashred3 times.
Connect to device
When the speaker is not connected to a device and not in pairing mode, short press the round MFB button to
attempt to connect to a device from the list of paired devices.Ensure the device Bluetooth is ON. When the device
is connected, you will hear the voice notification “connected”, and the indicator LED will flashblue once every 3
seconds.
Unlock the #STAYLOUD Sound Profile
While your music is streaming, press and hold the volume + and – buttons together (for up to 3 seconds) to
shift gears between the different Skullcandy tuned sound profiles. The #STAYLOUD sound profile boosts
the volume of the speaker and is ideal for outdoor use and your extra loud environments, whereas the
standard profile has a more balanced sound signature that is best for indoor use and your everyday grind.
Clearing the Pairing List
To clear the list of paired devices from the speaker, push and hold the + and round MFB simultaneously for 3
seconds while the power is ON. This will reset the speaker to default pairing mode the next time it is powered on.
Devices will need to be paired again once this has been done even if previously paired.
Battery Status Check
When the battery is low it will play the voice notification, “please charge device”.
Charging
In any state, you may plug in the included micro USB to USB power cable to begin charging the Shrapnel. The LED
will flash magenta 2x every 3 seconds to confirm that it is charging.
Music Controls
Start Music Playback
When the speaker is connected to the device but not streaming music, short press the roundMFBto start
streaming. When the device is streaming, the frontLED will be off.
Pause Music Playback
When the speaker is streaming music, short press the round MFBto pause the playback.
Volume Up
When the speaker is ON and not in pairing mode, short press the + button to increase the volume level.
Volume Down
When the speaker is ON and not in pairing mode, short press the ‐ button to decrease the volume level.
Track Forward
When the speaker is connected to a device, long press the+button to track forward.
Track backward
When the speaker is connected to a device, long press the‐buttonto track backward.
3.5mm Wired Audio Playback
When the device is not streaming via Bluetooth, plug in the included3.5mm cableinto the bottomAUX jack. To play
music through the wired connectionthe source device must be used to control playback. Track controls on the
speaker will be disabled. Volume controls will function normally. Note that Bluetooth streaming takes priority over
wired audio playback.
Phone Call/Receive Controls
On‐Board Mic and Volume function
When the Bluetooth is enabled, the on‐board Mic and the volume + ‐ buttons will be activated for full call
functionality.
Answer and Hang Up Call
When streaming BT, an incoming call can be answered with a short press of the round MFB. Once connected, the
call can be hung up with another single button press of the round MFB.
Reject incoming call
Long press (for up to 3 seconds) the round center button and the call will be rejected.
While call is active:
Put on hold
When the call is active, long press (for up to 3 seconds) the round MFB. Once on hold, another long press of the
round MFB will release the call on hold. You are also able to toggle between two calls with the same long press of
the round center button if you have one on hold. If you would like to end the call on hold or end the active call and
return to the call on hold, you must short press the round MFB.
Mute Mic function
When the call is active, short press the power button to mute the microphone, and again short press the power
button to unmute.
Volume function
Short press the volume + to increase call volume, and short press the volume – to decrease the call volume.
2nd Incoming call
While the active call is connected, short press the round MFB to end the current call and answer the 2nd incoming
call. If you would like to put the active call on hold and answer the 2nd incoming call, long press (up to 3 seconds)
the round MFB. To then return to the call on hold, long press the round MFB.
Other Device Features
Auto Power Off
If the device is idle for 5 minutes, it will turn itself off while the switch is in the on state. To turn the speaker back
ON,press and hold the power button.
Auto LED off
The LED will be powered off after 4.5 minutes for every state. This feature is to conserve battery life. For example,
if the BT speaker is at music streaming state for 4.5 minutes, the LED will auto off. The timer will reset whenever
there is a change in state. One exception is that the LED indication for pairing mode will remain active during
pairing mode as pairing mode itself has a timeout.
Multipoint Support
The speaker supports connecting to up to TWO audio source devices at the same time. At any one time, only one
device's audio will be heard through the speaker. When using the play/pause button on the speaker, the
play/pause command will always go to the last streaming device. To switch the playback device, the user has to
pause/stop the playback on the currently streaming device and must start the playback from the other device
directly. Once the playback is established with the new device the use of play/pause command will function for
that device.
Expected Charging Time
When using the provided charger, a fully drained Shrapnel battery will take approximately 2 hours to fully re‐
charge to 100% battery life.
Trouble Shooting
There is choppy audio after connecting to the speaker, or will not connect…
When multipoint is enabled, the Bluetooth chip will be searching for a 2nd paired device while still streaming music
from the connected device. This causes a short section of choppy audio immediately after connection. It should
resolve and play normally after approximately 30 seconds. Also, the following will resolve the issue immediately:
‐
Restore defaults: Hold Volume + and the round MFB for 5 seconds to reset the paired device list and
then pair again.
‐
If restoring defaults does not solve the problem, remove Shrapnel from Device: Go in to pairing
settings on the device and remove or ‘forget’ Shrapnel and then pair again.
Wired audio will not play…
If wired audio will not play, make sure that no device is streaming to the speaker. Disconnect paired devices from
the speaker.
Sound Set‐Up
Shrapnel on bottom “feet”
When Shrapnel is on the edge of a room or facing an entire group of people, set it on its bottom surface, so
that the speakers are facing the entire group.
Shrapnel on back
When Shrapnel will be playing in the middle of a group (i.e. on a table, by a campfire, etc.), place Shrapnel on
its back face so that the speakers are pointing upward. This creates a uniform 360 degree sound field.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2014:08:12 19:20:04+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:08:12 19:20:04+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Shrapnel User Guide 20140617
Creator                         : Administrator
Document ID                     : uuid:707fac3b-5425-4abe-ab4c-6e33603ce5e1
Instance ID                     : uuid:df4e1d98-b52c-4d24-970c-af721bdf1ead
Page Count                      : 6
Author                          : Administrator

EXIF Metadata provided by EXIF.tools