Skuandy SK20130010 Ringer User Manual

Skullcandy Inc. Ringer

User manual

User Guide //Manuel UtilisateurPower on/off // Bouton d’alimentationPress the power (play, pause, stop) button for3 seconds or untill you hear a beep sound.A blue LED is indicate for power on, and a redLED is indicated for power off.Appuyez sur le bouton (play/pause/stop) pendant 3 secondes ou jusqu'à ce quevous entendiez un bip sonore un voyant bleuindique la mise sous tension, et un voyantrouge indique la mise hors tension.Pairing // Connexion/JumelageWhen power is off. Press the power and holduntil you hear two separate beeps.The LED indicator will blink blue and red.Pause // PausePress the power button once to pause andonce to play again.Appuyez sur le bouton marche/arrêt unefois pour mettre en pause et une fois deplus pour continuer.Volume up // Volume HautPress the volume up/next track button onceand let go.Permet d’augmenter le volume.Lorsque l’alimentation est coupée. Appuyezsur le bouton marche/arrêt et maintenez lejusqu’a que vous entendiez 2 bips distincts.Le voyant clignotera en bleue et rouge.Note: Button function is on bottom of Speaker. When placed on hard surface buttons can be used on top of speaker.NB: Les boutons de fonction sont au-dessous des haut-parleurs. Si l’appareil est placé sur une surface dure, les boutons peuvent-être utilisés sur le dessus.Volume down // Volume BasPress the volume down/previous track buttononce and let go.Next track // Piste SuivantePress and hold the volume up/next trackbutton for 3 seconds.Appuyez sur le volume haut et maintenez-le enfonce pendant 3 secondes, pour passerà la chanson suivante.Permet de diminuer le volume.Previous track // Piste PrécédentePress and hold the volume down/previoustrack button for 3 seconds.Appuyez le volume bas et maintenez-le enfoncependant 3 secondes, pour revenir à la chanson précédente.Charging // ChargementSimply plug in the micro USB into thecharging port. The indicator turns red whencharging, it's turn blue if fully charged.(Note: Music cannot be played whilecharging.) Simplement, branche un câblemicro-USB dans le port de chargement. Levoyant deviendra rouge pendant le chargement,et deviendra bleue quand il est totalementcharge, (NB: Aucune musique ne peut êtrejouée pendant le chargement)./Volumes/Mac02 file 1/c386/2XL Bluetooth Speaker user Guide/work
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. FCC ID: Y22-2XL20130001 IC: 10486A-2XL20130001 FCC ID:Y22-SK20130010 IC:10486A-SK20130010

Navigation menu