User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2730608 |
| Application ID | f7mOIaLtp34z+8bp9cFsZA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 84.62kB (1057785 bits) |
| Date Submitted | 2015-08-28 00:00:00 |
| Date Available | 2015-08-30 00:00:00 |
| Creation Date | 2015-08-28 15:35:10 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-08-28 15:35:10 |
| Document Title | user manual.pdf |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Nemko |
QUICK GUIDE HESH WIRELESS USER GUIDE Main Headphone Controls (EN) Power On Press and hold the Main Function Button (MFB) (for up to 3 seconds) for the LED light ring to riash magenta and the ascending power on tone to be played. There wl then be a blue LED double flash while the HESH BT looks to connect to up to 2 devices in the paired device list. If you have not yet paired to the device. and no paired devices are available for connection. the headphone wl enter directly into paring mode to be located by your deVIce (see enter pairing mode instructions). If you have been paired to the Hesh BT previously, and your Bluetocth is enabled on your device, you wil automaticaly connect and the voice notification “connected“ Wil play. Power On While in any mode (standby, pairing, streaming) press and hold down the MFB (for up to 5 seconds) and the Hesh BT will power off. As the headphone powers off, it will play the depending power down tone and the LED will flash magenta. Enter Pairing Mode When the headphone is OFF and you have not yet paired to your Hesh BT, press and hold the MFB (for up to 5 seconds) to reach the pairing mode. The LED wil first flash magenta as the device powers on and you wl then hear the voice notification “Pairing" as the LED begins to altemate red and blue. You are now in pairing mode. Scan for available devices and once HESH ET is selected, you will hear the voice notification “connected". Once paired. the LED Wil flash blue every 5 seconds. Quick Connect to Device If you have previously paired your device to your Hesh BT, simply press and hold the Main Function Button (MFB) (for up to 3 seconds) for the LED light ring to flash magenta and the ascending power on tone to be played. There wil then be a blue LED double flash every 2 seconds while the HESH ET is in "dance search mode" and looks to connect to a device in the paired device Ist. Ensure the device Bluetooth is ON: you wl pair automaticaly and the voice notification “connected" wil play. Clearing the Device Paired List (“important With pairing issues’) If you have already paired to multiple devices and have any issues pairing, you will need to complete this action. Power ON the Hesh BT and while in "device search mode" hold the volume + and volume — buttons simultaneously for up to 5 seconds or untl you hear a long double tone. This action wil clear al devices that had previously paired to the Hesh BT, and you will then enter directly into pairing mode. Ensure the device Bluetooth is ON. and again scan for avaibble BT headset demos for pairing. Charging and Battery Status Check When the micro USB charging cable is plugged in. there wil be a red LED indicator next to the port that Will turn on as long as the battery is charging. Once the battery is completely charged, the LED indicator will turn off. When the battery has dropped between 5%-10% of its total charge, LED light ring wil begin to blink red and the voice notification “please charge deVice’ wil play approximately every 15 minutes. This is an indication that the Hesh BT should be charged via the provided micro USB to USB cable, or if you cannot immediately re-charge, you have the option to continue listening via your 3.5mm AUX cable. Expected Charging Time When usmg the prowded micro USB charging cable, a fuly drained Hesh BT battery will take approximately 1.5 hours to fully re-charge to 60% battery life. At full volume, the BT steaming play time is about 15 hours. Mict Cable Audio Playback At any time, you may plug in the provided AUX Mici cable into the 8.5mm port located at the bottom of the left ear cup to activate the wired playback (it is recommended to power down the deVice before plugging in the aux cable). All track and volume controls on the physical headphone will be disabled however, you wil stil have fLI track control, play/pause, and cal functionality which can be utilized through the Mici cable and device. MUSiC Controls Start Music Playback When the Hesh ST is connected to the device but not streaming music. short press the round MFB to start streaming. Pause Music Playback When the Hesh ET is streaming music, short press the round MFB to pause the playback. Volume Up When the Hesh BT has been paired, you may rapidly press the + button to increase the volume level. You wil hear a tone when the volume has reached its maximum. Volume Down When the Hesh BT has been paired, you may rapidly press the - button to decrease the volume level. You wil hear a tone when the volume has reached its minimum. Track Forward When the Hesh BT is paired. press and hold the volume + button for up to 3 seconds to track lonNard. Track back When the Hesh ET is paired, press and hold the volume - button for up to 3 seconds to track back. Phone Cal/Receive Controls On-Board Mic / Mict Cable and Volume function When the Bluetooth is enabled, the on-board Mic and the volume + - Hesh BT buttons Will be activated. If the 3.5mm aux cable is plugged in, the on-board Mic and volume + - buttons on the headset wil be deactivated. When the Hesh ET is wired al controls will be enabled through the in-line Mict cable or device. Voice/Mic Command Activation When paired to the Hesh BT and not streaming music (standby). you may activate your voice command on your device through your on-board microphone with a double short press of the MFB. Answer and Hang Up Call When streaming BI an incoming call can be answered with a single button press of the MFB. Once connected. the call can be hung up with another single button press of the round MFB. Reject incoming cal Long press (tor up to 2 seconds) the MFB and the cal will be rejected. While cal is active Put on hold When the call is active, long press (for up to 2 seconds) the round MFB. Once on hold, a short press of the round MFB wil release the cal on hold. Mute MIC function When the call is active, double short press the volume - button to mute the microphone, and double short press the volume + button to unmute. Volume function Short press the volume + to increase cal volume. and short press the volume — to decrease the call volume. NOTE: To prevent possible hearing damage. do not listen at high volume levels for long periods. Excessive sound pressure from earphones and headphones can cause hearing loss. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and ifnot installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment ofi‘and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit ditferent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada’ s licenceeexempt RSSs. Operation is subject to the following two conditions: ( 1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le pr é sent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autoris é e aux deux conditions suivantes : (l) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l'appareil doit accepter tout brouillage radio é lectrique subi, m é me si le brouillage est sceptible d’en compromettre 1e fonctionnement. FCC lDiVZZ-SKZOBOOIS |C:10486A-SK20130015
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Nemko Title : user manual.pdf Create Date : 2015:08:28 15:35:10+08:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2015:08:28 15:35:10+08:00 Metadata Date : 2015:08:28 15:34:10+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:407b1c9f-0fa7-48d4-ab4d-4b0e3cc16696 Instance ID : uuid:c0969da0-b9e3-49f7-b596-78e459f41738 Page Count : 5 Author : NemkoEXIF Metadata provided by EXIF.tools