Sky Light Imaging HPC02 Parrot Cloud Camera User Manual

Sky Light Imaging Limited Parrot Cloud Camera

User Manual

Home+ Parrot HPC02B User Manual Home+ Android Home+ iOS Features  Stunning video quality.  109° wide field of view.  Set up your camera directly from your smart device.  Live stream via your smart device. Specifications Wireless....................................................802.11 b/g/n Lens............................................................Wide angle Video Resolution................................720p(1280x720) ..........................................................WVGA(848x480) ......................................................WQVGA (432X240) Video Format......................................................H.264 Photo Resolution..................................................1MP White Balance......................................................Auto Night Vision........................................Around 5 meters Microphone.......................................................Built-in Speaker.........................................Built-in, 1W,8ohm Sound Detection....................................................Yes Motion Detection....................................................Yes Power...................................................AC/DC adapter Input Voltage............................AC:100-240V/50-60HZ Output Voltage...........................................DC:5V/1.0A Compatibility...................IOS 7.0/Android 4.3 or higher CPU......................................................1GHz or above RAM........................................................1GB or above Operating Temperature.................................-10°-40°C Storage Temperature....................................-40°-80°C Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document. Package Contents • Home+ Parrot Cloud Camera • AC Adapter with USB cable • Wall insert x 2 • Screw x 2 • User Manual Functional Parts Troubleshooting Camera disconnects from Wi-Fi network • Check with your internet service provider. • Move your camera closer to your router. • Reduce the number of connected devices near the camera. Fail to view videos using your smart device • Reconnect the camera to your Wi-Fi network. • Check the USB cable and power connection. Status LED lights up in Red • Restart your router. • Reset your camera and pair it again. • Press and hold the RST hole for 7 seconds to factory reset your camera and do setup again. Status LED flashes in Red slowly • Make sure your internet Connection is alright. Camera cannot recognize QR Code • Make sure the camera lens and the QR code are in parallel. • Adjust the scan distance properly per the screen size of your mobile device. • Avoid scanning in dark environment or strong sunlight. Camera cannot detect router • Set the router’s channel within the range from 1 to 11. FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC's RF exposure guidelines, place the product at least 20cm from nearby persons. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. Connect your Camera to an External Power Supply 1. Connect the camera to the AC adaptor with the USB cable and plug the adapter into an outlet. The camera turns on automatically, the status LED indicator shows stable purple for about 15 seconds, then shows stable blue for about 20 seconds, then blinks alternately in red and blue. 2. Place the camera wherever you want. Set up your Camera The camera can be set up and connected to an AP by scanning a QR code and reading the AP information through the Home+ Application. Remark: 1. Search for Home+ app via the Play Store or App Store with keywords (For Play Store: videocloud or homeplus. For App Store: videocloud.). Download and install the app to your smart device. Or to scan QR code at the top page for downloading App interface directly. 2. Plug it in and connect to your Wi-Fi network. You’re ready to begin live streaming! 3. Please refer to the “Help” page of the home+ app to download, operate, and utilize the full capabilities of the App. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Recycling This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled of dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. AM-HPC02-GB-STD-7 Mount your Camera on a Wall or Ceiling You can place the camera on flat surface or mount it on any wall or ceiling. 1. Attach the camera to your wall or ceiling by using the including screws and wall insert. 2. Mount your camera by fitting the base into screws. 3. Plug it into a power outlet. Microphone For audio input IR LED Turn on/off night vision automatically Lens Provide a clear, wide angle sight Status LED Indicator Show the camera status. Micro SD card slot Store video inside the card Swivel Joint Pan the camera by different location usage Reset Hole Reset the camera Speaker Micro USB port Set button - Press to enter the QR code scanning mode. Rubber Base Increase friction to fix camera on smooth surface Mounting Slot Direct attach the camera to screws

Navigation menu