Sky Phone SKYTANK Feature Phone User Manual

Sky Phone LLC Feature Phone

User manual

-1- 1. General Information 1.1 Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.2 Safety Information If your phone has lost or been stolen, notify the telecommunication office the SIM card is disabled (network support is required). This can avoid economic loss caused by unauthorized use. Please take measures as following to avoid your phone being unauthorized used: · Set PIN code of SIM card · Set phone password 1.3 Safety warning and Attentions Safety warning  ROAD SAFETY COMES FIRST Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal!
-2-  SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight.  SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas. Turn off your mobile phone before entering a place susceptible to explosion, such as an oil station, oil tank, chemical plant or a place where a blasting process is under way.  OBSERVE ALL SPECIAL REGULATIONS Follow any special regulations in force in any area such as hospitals and always switch off your phone whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your mobile phone near medical apparatuses, such as pacemakers, hearing aids and some other electronic medical devices, as it may cause interference to such apparatus. Follow any special regulation in force in any area such as hospital and always switch off your phone whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your mobile phone near medial apparatuses, such as pacemakers, hearing-aids and some other electronic medical devices, as or may cause interference to such apparatuses.  INTERFERENCE The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located below the microphone. Do not touch the antenna area during a conversation, lest that the conversation quality deteriorate.
-3-  QUALIFIED SERVICE Only qualified personnel may install or repair phone equipment. Installing or repairing the mobile phone on your own may bring great danger and violate the warranty rules.  ACCESSORIES AND BATTERIES Use only approved accessories and batteries.  USE SENSIBLY Use only in a normal and proper manner.  EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call service. Therefore, do not rely solely on the mobile phone for critical communications such as first aid. Please consult the local network operator. Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some network even do not support the emergency call service
-4- Precaution This mobile phone is well designed with fine art. Please exercise special care when using it. The following suggestions will help your mobile phone survive the warranty period and extend its service life:  Keep the mobile phone and all its fittings beyond children's reach.  Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode electronic circuits.  Do not use or store the mobile phone in dusty place, lest that active parts of the mobile phone be damaged.  Do not store the mobile phone in a high-temperature place. High temperature will shorten the life of electronic circuits and damage the battery and some plastic parts.  Do not store the mobile phone in a chilly place. Otherwise, moisture will be formed inside the mobile phone to damage electronic circuits when the mobile phone is moved to a constant temperature place.  Do not throw, knock or shock the mobile phone, as that will destroy the internal circuit and high precision components of the mobile phone.
-5- 2.Your phone 2.1 Functions of Keys  Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records.  End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state. You can hold it for two or three seconds can power on/off the mobile phone  Direction key Press them to scroll the options when browsing a function list. In edit state, press direction keys to navigate.  Left and right soft key The bottom line on the screen displays the functions of the Left and Right soft key.  OK key Press it to confirm a selection.
-6-  Number keys, * key and # key Press number keys 0 through 9 to input or edit state to input numbers and characters; In idle screen, you can press left soft key then press * to lock/unlock keypad. Press two times the key * to input "+" in standby interface. When the symbol "+" appears, Press the * key quickly to input "P" or "W","P" and "W" are used for calling the extension; "+" are used for dialing an international call. 3.Getting started 3.1 Installing the SIM Cards and the Battery A SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data. Note: After powering off your mobile phone, wait for a few seconds before removing or inserting a SIM card. Exercise caution when operating a SIM card, as friction or bending will damage the SIM card.
-7- Properly keep the mobile phone and its fittings such as the SIM cards beyond children's reach. Installation  Hold the End key for a while to power off the mobile phone.  Take the back cover above the battery away.  Take the battery away.  Insert the SIM card into the SIM card slot lightly with the corner cutting of the card aligning to the notch of the slot and the gold plate of the card facing download, till the SIM card cannot be further pushed in.  With the metallic contacts of the battery facing the metallic contacts in the battery slot, press the battery down until it locks into place. Using code The mobile phone and the SIM cards support sorts of passwords, in order to prevent the phone and the SIM cards from being misused. When you are prompted to input any of the codes mentioned below, just input the correct code and then press the OK key. If you input a wrong code, clear it and then input the correct code.  Phone lock code The phone lock code may be set to prevent your mobile phone from being misused. In general, this code is provided along with the mobile phone by the manufacturer. The initial phone lock code is set to 0000 by the manufacturer. If the phone lock code is set, you need to input the phone lock code when powering on the mobile phone.
-8-  PIN The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being used by unauthorized people. In general, the PIN is supplied with SIM card by the network operator. If PIN check is enabled, you need to input the PIN each time when you power on your mobile phone. The SIM card will be locked if you input wrong PIN code for three times. Unlocking methods as follows: -Input the correct PUK according to the screen tips to unlock the SIM card. -Then input the new PIN and press the OK key. -Input the new PIN again and then press the OK key. -If the input PUK is correct, the SIM card will be unlocked and the PIN will be reset. Note: The SIM card will be locked if you input wrong PIN code for three times. To unlock the SIM card, you need to input the PUK. In general, the PUK can be obtained from the network operator.  PUK The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied with SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times, SIM card will be invalid. Please contact the network operator to replace the SIM card. 3.2 Installing T-Flash Card The T-Flash card is a pluggable mobile storage card inside the mobile phone.  To install the T-Flash card, insert the card into the card slot, till the card cannot be further pushed in.
-9- To remove the T-flash card, take the card out. Note: 1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is powered on. You must power off the mobile phone and then power it on, so that the phone can identify the T-Flash card. 2. The T-Flash card is a miniature object. Keep it out of the reach of children for fear that children swallow it! 3.3 Charging the Battery The lithium battery delivered with the mobile phone can be put into use immediately after being unpacked. Battery level indication:  Your mobile phone can monitor and display the battery state.  Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen.  When the battery energy is insufficient, the mobile phone prompts "Battery low". If you have set an alert tone, an alert tone will be given off when the battery level is too low.  A charging animation appears when the battery is being charged. When the charging is complete, the animation disappears. Using a travel adapter:
-10-  Install the battery into the mobile phone before charging the battery.  Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted.  Insert the plug of the travel charger to an appropriate power outlet.  During the charging, the battery level grid in the battery icon keep flickering till the battery is fully charged.  It is normal when the battery becomes hot during the charging period.  The battery icon does no longer flicker when the charging process ends. Note: Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are inserted in the right direction. Inserting them in a wrong direction may cause charging failure or other problems. Before the charging, ensure that the standard voltage and frequency of the local mains supply match the rated voltage and power of the travel charger. Using the Battery The performance of a battery is subject to multiple factors: radio network configuration, signal strength, ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other application mode you choose to use. To guarantee the optimal performance of your battery, please stick to the following rules:  Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused during the charging.
-11-  Power off the mobile phone before removing the battery.  The charging process lasts a longer time for a new battery or a battery not in use for long. If the battery voltage is too low to enable the mobile phone to be powered on, charge the battery for a longer time. In this case, the battery icon does not flicker until a long time after the battery enters the charge status.  During the charging, ensure the battery is placed in a room temperature environment or in an environment close to room temperature.  Immediately stop using the battery if the battery produces odor, overheat, cracks, distort or has other damage, or if the electrolyte leaks.  The battery wears out with use. A longer charging time is required as the battery is put into use for a long time. If the total conversation duration decreases but the charging time increases even though the battery is properly charged, purchase a standard battery from the OEM or use a battery approved by our company. Using any poor-quality fittings will cause harm to your mobile phone or even incur danger! Note: To guarantee your personal safety and protect the environment, do not litter the battery! Return the old battery to the mobile phone manufacturer or place it in specified battery reclamation areas. Do not litter any battery with other rubbish. Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe consequences!
-12- 3.4 Powering On/Off the Mobile Phone Hold the End key for a while to power on the mobile phone. A power-on animation appears on the display screen. Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code. The original code is 0000. Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is provided by the network operator for new opening SIM card. Enter the standby interface. To power off the mobile phone, hold the End key for a while. 3.5 Linking to the Network After the SIM card and the mobile phone are successfully unlocked, the mobile phone automatically searches for an available network. After finding a network, the mobile phone enters the standby state. When the mobile phone is registered in the network, the name of the network operator is displayed on the screen. Then you can dial or receive a call. 3.6 Dialing Calls In the standby interface, press Dial-pad enter virtual dial pad, press number keys to input the area code and the telephone number, and then press the dial key to dial a call. 3.7 Using the Headset It would enter headset mode automatically when you insert headset to the slot. Make sure of inserting it
-13- at the bottom of the slot, or you can’t use it normally. 4.Using the Menus 4.1 File manager The phone supports the memory card. The capacity of the memory card is selectable. You can use the file to conveniently manage various directories and files on the memory card and in the phone. Choose File manager to enter the root directory of the memory. The root directory will list the default folders, new folders and user files. When the mobile phone is power on for the first time or when you have not changed the directory, the root directory contains the default folders only. 4.2 Phonebook The mobile phone can store up to 300 telephone numbers. The telephone numbers that a SIM card can store depends on the storage capacity of the SIM card. The telephone numbers stored in the mobile phone and in the SIM cards form a phonebook. The phonebook search function enables you to view contacts. You can search a contact as required from the phonebook. Select this option, in the edit interface, input the name of the contact you want to search or the first letter(s) of the name. All the contacts meeting the search condition are listed. Press the Up and Down direction keys to browse the contacts and select contact. Press right direction key to view other groups: SIM1/2, family, friends,
-14- business, classmates and so on. This function enables you to view the internet. Your phone will ask you with existed way. You can start to view only by starting corresponding way. Note: Consulting the local network operator for related fee and specific setup. 4.3 Games Entering can play games 4.4 Call logs SIM card 1 and SIM card 2 Call history include: All logs \ Dialed calls \ Received calls \ Rejected calls \Missed calls\ Delete call logs \Call timers. 4.5 Messages If the short message memory is full, a blinking message icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages. Into Message can be Write message\ Inbox\ Drafts\ Outbox\ Sent messages \Broadcast messages\ SMS templates \SMS settings\ SMS Backup\SMS Import\ etc. operation The SMS (Messages) can support to identify 22 regional languages of India. 4.6 Multimedia Camera The phone is provided with a camera, which supports the photographing functions. In the capture
-15- interface, roll the phone to align the camera to the picture and then press OK key to capture photos. The photo will be saved in the File manager of the phone or memory card. Image viewer You can view the pictures in the T-card or phone by this function. Press the direction key to choose them and left soft key edit the pictures. Press right soft key to return last interface. Video recorder This function enables you to recording a video. In the capture interface, press OK key to capture videos clip. Video player Use this function to play video files. By pressing the direction key can you control the playing process of video player: play/pause（OK key）, fast forward (press and hold right direction key) and rewind (press and hold left direction key). Audio player You can use this function to play audio files. By pressing the direction key you can control the playing process of audio player: play/pause（OK key）.
-16- Sound recorder The phone support WAV and AMR. The AMR takes the compression algorithm. So in the same memory condition, it has longer recording time than WAV. FM radio You can use the application as a traditional FM radio with automatic tuning and saved channels. In FM radio interface, left or right direction key to search channels manually, OK key to play/pause the playing process of the current channel. 4.7 Others Enter others can be Calculator\Ebook reader 4.8 Settings Enter settings menu for: Phone settings\Security settings\Network settings\Dual SIM settings\Connectivity\Restore settings\Call settings operation. Notes as below for default password: Restore factory settings default password:0000 Phone security default password:0000 Mobile tracker default password:1234 Privacy Lock default password:0000
-17- 4.9 Profiles The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the specific events and environments. Customize the user profiles according to your preference and then activate the user profiles. The user profiles fall into five scenarios: General, Silent , Meeting, Outdoor , Headset, Bluetooth mode. you can also save the Profiles if you like. In the standby mode long press # can switch scenarios. 4.10 Organizer Enter Tools can be SIM toolkit\ Bluetooth\Calendar\Alarm\Calculator \Torch light operation. 4.11 Services You can use the function to view web pages and search for information on the web before you connecting to the Internet. When you open Internet Service, your home page opens. The web address (URL) of the current page is displayed at the top of the window. 5. Common problems and solutions 5.1 When the mobile phone displays “Insert SIM”? 1. Contact between SIM card and mobile phone is bad or the SIM card is not inserted. 2. Change the SIM card and try again. The SIM card may have fault if the mobile phone operates
-18- normally. Please contact your network operator. 3. If there is oxidation on the surface of SIM card or SIM card slot of the mobile phone, please wipe with alcohol or clean cloth. 4. Please contact Sales Service Center or Maintenance Department if the above methods are invalid. 5.2 Checking and precautions of PIN, PIN2, PUK, PUK2 and password 1. Please consult local network operator. 2. The SIM card is locked if you input invalid PIN code for three times continuously. 3. Please consult SIM card operator for PUK code. 5.3 Network connection fails 1. The signals in your local place are weak or have shielding. Please move to other places and try again. 2. Please contact Sales Service Center or Maintenance Department to do phone test. 5.4 You can’t be heard 1. Make sure whether it is network problem and try again. 2. The communication lines in some places are bad. Please move to other places and try again. 3. The trunk line of network operator is bad. 4. Please contact Sales Service Center or Maintenance Department if the above methods are invalid. 5.5 Can’t charge the battery 1. The contact between charger and mobile phone is bad. Make sure whether the installation is
-19- proper. 2. Check whether the battery is valid. The battery performance drops after several years. 5.6 Weak signal 1. If the local network signals are unstable, the signals of the mobile phone receives won’t be stable. Please move to other places and try again. 2. Please contact Sales Service Center or Maintenance Department if the above method is invalid. 5.7 Can’t make a call 1. The local network signals are weak and please move to places with strong signals and try again. 2. Local network operator is busy. Please try again later. 3. Check whether Hide ID is enabled. You can’t make a call if the local network operator doesn’t support this function and you have enabled it. 4. Please contact Sales Service Center or Maintenance Department if the above methods are invalid. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired
-20- operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were
-21- developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.181W/Kg and when worn on the body, as described in this user guide, is 0.790W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2ABOSSKYTANK Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation
-22- This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 15mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Navigation menu