Sky Viper V950Str Instruction Manual 1003423 ManualsLib Makes It Easy To Find Manuals Online! User

2017-02-23

User Manual: Sky-Viper Sky-Viper-V950Str-Instruction-Manual-1003423

Open the PDF directly: View PDF .
Page Count: 12

LiPo BATTERY

Battery door includes

security screw to prevent

child access to LiPo battery.

Users over 14 years of age

may remove screw from

door for easier access.

Download the Sky Viper

Video Viewer app at

™

Remove all packaging attachments before giving the toy to a child.

Not suitable for children under 3 years due to small parts that could be swallowed.

Conforms to product safety standards ASTM F963.

Keep instructions for future reference. Do not discard.

This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or

relocate the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on

a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for help.

INSTRUCTION GUIDE

CONTENTS

RC Streaming Drone

Rechargeable 3.7v

650mAH LiPo Battery

Remote Control

4 Replacement Blades

Device Holder

USB Charging Cable

Screwdriver

Screws

STR

DRONE

VIDEOVIDEO

STREAMING

Before each use, an adult should check this product and the LiPo battery to ensure no damage or

hazards exist. Drone has rotating blades that move at high speed, posing danger of damage and

injury. Pilots are responsible for any actions that result in damage or injury from the improper

operation of Drone. Adequate ying space is required. Avoid ying near interior fans and/or vents as

they may make ying difcult to control. Keep a safe distance away from streets, public thoroughfares

and power lines. Never attempt to retrieve Drone from any location higher than your reach (such as

rooftops or trees) or from any location that poses a safety hazard. Never y Drone at night. Keep

Drone in sight at all times during operation. Discontinue operation immediately if Drone ies out of

your eld of view. Do not y near spectators or animals. Pets can become excited about R/C vehicles

therefore keep away from pets at all times. Keep spinning rotors away from ngers, hair, eyes and

other body parts. Always launch from a at surface. Never leave Drone unattended while it is turned

on. Read all enclosed information before operating.

ALKALINE BATTERY CAUTIONS

t Do not use rechargeable batteries.

t Non-rechargeable batteries are not to be recharged.

t Different types of batteries or new and old batteries are not to be mixed.

t Batteries are to be inserted using correct polarity.

t Remove exhausted batteries as soon as possible and discard properly.

t Remove all batteries from compartment if toy is not used for a long period.

t The supply terminals are not to be short-circuited.

t Never throw batteries in a re or attempt to open the outer casing.

WARNING:Batteries are harmful if swallowed. Please keep away from children.

Battery Disposal: Dispose of batteries according to the local laws and regulations of your region. Some batteries

may be recycled, and may be accepted for disposal at your local recycling center. If you are not able to identify the

applicable rules in your area, please check the instructions of the battery manufacturer.

THIS PRODUCT CONTAINS A LITHIUM-POLYMER BATTERY3.7V 650mAH:

LiPo batteries have a severe risk of re and injury if they are improperly handled or misused. They may explode,

overheat or ignite.Read all following precautions and instructions regarding the care and use of LiPo batteries. 

The enclosed LiPo battery is only to be used with the vehicle and charger included with this product.

t Keep away from ammable materials.

t Do not expose to direct sunlight.

t Do not place in res or leave in hot places.

t Do not drop or make subject to strong impact.

t Keep dry and away from water.

t Remove exhausted batteries as soon as possible and discard properly.

t Remove all batteries from the compartment if toy is not used for a long period.

t The supply terminals are not to be short circuited.

t Never throw batteries in a re or attempt to open outer casing.

LiPo Battery Disposal: LiPo batteries must be recycled or disposed of properly. They should not be disposed

of with other household waste. Check your local laws and regulations for correct recycling and/or battery disposal.

ADULT SUPERVISION REQUIRED

WARNING: Do not y with broken or

damaged propeller blades as it may

cause damage or lead to injury.

1 Unplug LiPo battery on Drone.

Make note of the blade color and letter (A or

B) before removing the blade from Drone.

(Markings are located on the underside of

blades and Drone).

3 Remove the small screw using the mini

screwdriver provided.

4 Replace the damaged blade with a new

blade with matching color and letter.

Secure the blade with the retaining screw.

CHANGING DAMAGED PROPELLERS

MAINTENANCE

FRONT

BACK

Bottom View of Drone

Over time, loose hair or carpet bers may get wound in blades, reducing performance.

Unplug Drone and remove bers from motors. (Remove blades if necessary)

GREEN

BLADES

GREY

BLADES

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 1 / PAGE 10

1 2

CHARGING, INSTALLING & CARING FOR

LIPO BATTERY IN THE DRONE

ONE TOUCH STUNTS

FRONT BARREL ROLL REAR BARREL ROLL

BLADE GUARDS FOR BEGINNERS

NOTE: Once a stunt has been initiated,

DO NOT adjust Throttle or press any other

controls until the stunt has been completed.

While ying forward (or reverse), press the

STUNT BUTTON.

BARREL ROLLS

12 3

RIGHT FLIP

FRONT FLIP

FLIPS

1 Bring the Drone to a mid air hover without ying in any

direction. Remove nger from the DIRECTION STICK

2 While HOVERING,

press and hold the STUNT BUTTON.

3 While still holding the

STUNT BUTTON,

tap the DIRECTION

STICK in the direction you want to the drone to ip.

Blade guards are great for beginning pilots and can

be easily installed if desired. The guards however add

undesired weight and reduce ight performance.

Blade guards are optional and should NOT be used

with Advanced Flight Sensitivity setting 3.

1 Insert the posts of the blade guards into

the holes of the drone.

2 Secure the blade guards with the retaining screws.

IMPORTANT:

LiPo battery can be removed from Drone by loosening

battery compartment screw, opening door and removing

the battery. When replacing the battery, be careful not

to pinch battery connector wires when closing the door.

Also ensure that wires protrude through open slots on

the sides of the battery door as shown. Make sure there

is sufcient wire slack for easily connecting and

disconnecting plugs, but not so much slack that wires

interfere with spinning blades.

1 Disconnect the LiPo battery connectors hanging out from the

back of the drone.

2 Plug the red male connector from the LiPo battery into the black

female connector end of the USB charging cord.

3 Plug the USB end of the charging cord into a USB power

source and charge battery until full.

RED LIGHT = CHARGING

GREEN LIGHT = FULLY CHARGED

4 Once fully charged, disconnect the charing cord from

battery and power source. (Always unplug from power

source when not in use).

CHARGING PRECAUTIONS:

After use, allow LiPo battery to cool down to room temperature before charging again.

Charge LiPo battery in an isolated area, away from excessive heat or moisture.

If LiPo battery swells, unplug it immediately and permanently discontinue use.

Do not modify, heat, or wet the battery in any way. Only recharge with provided charger.

REMOVE THE CAMERA UNIT FROM THE DRONE BEFORE PERFORMING STUNTS. STUNT

FUNCTIONS WILL NOT WORK WITH CAMERA UNIT ATTATCHED. ALSO REMOVE BLADE

GUARDS WHEN FLYING IN ADVANCED SENSITIVITY MODE 3.

IMPORTANT

Drone should be ying at least 9 feet in the air with a minimum clearance of 9 feet

in all directions before attempting stunt functions.

STUNT FUNCTIONS SHOULD BE PERFORMED OUTSIDE ONLY.

CAUTION!

9 2

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 9 / PAGE 2

DOWNLOADING THE APP

ATTACHING YOUR DEVICE TO THE REMOTE

CONNECTING TO THE STREAMING DRONE WITH YOUR DEVICE

iOS

Go to the App Store and search for Sky

Viper Video Viewer app. Then, click install.

Sky Viper Streaming Drone is equipped with WiFi connectivity, so you can view streaming video on

your smart device.

Android

Go to the Google Play Store and search for Sky

Viper Video Viewer app. Then, click download.

1 Install the DEVICE HOLDER to remote.

2 Pull the DEVICE HOLDER arm.

3 Insert a smart device (Devices larger than 3.1/8”wide can be used, can not be attached

to remote).

4 Follow app directions for streaming, recording and video playback.

1 Go to Wi-Fi setting on your smart device.

2 Select SKYVIPER_XXXXXX and connect.

3 Open the Sky Viper app on your device.

4 The App will bring up your Drone’s ID.

5 Follow the on-screen icons to interact with your Drone.

STREAM LIVE VIDEO TO YOUR

SMART DEVICE

3421

–

1.5 V

AAA (LR03)

–

1.5 V

AAA (LR03)

–

1.5 V

AAA (LR03)

–

1.5 V

AAA (LR03)

4 x

IF AT ANY TIME DURING CHARGING OR USE THE BATTERY BECOMES DAMAGED IN ANY WAY,

DISCONTINUE CHARGING OR USE OF THE BATTERY IMMEDIATELY.

Continuing to charge or discharge a battery that has been damaged can result in a re.

Quickly and safely disconnect the Drone from charging and place away from ammable

materials. Observe the battery for at least 30 minutes to be certain no additional swelling

or rupture occurs. Completely discharge the battery by submerging it in a saltwater

solution (1/2 cup salt per gallon of water) for 24 hours.

Check your local laws and regulations for correct recycling and/or battery disposal.

WARNING!

WHEN NOT IN USE:

Always UNPLUG the Drone’s LiPo battery when not

in use or when Drone is being stored or transported.

Store the LiPo battery and Drone in a dry area at

room temperature.

Avoid temperatures less than 40°F/4°C and greater

than 120°F/49°C.

Do not leave the LiPo battery in a car or exposed to

direct sunlight. If exposed to temperatures greater

than 120°F/49°C, the LiPo battery can be damaged

or may catch re.

AUTO SHUTDOWN:

If battery voltage drops to an extremely low level, Drone will automatically shutdown.

The Video Drone will need to be recharged to restore ying power.

If anything prevents Drone’s blades from spinning or they become jammed, Drone will

automatically shutdown. The LiPo battery will need to be unplugged, then reconnected to

restore ying power.

Loosen screw in the Remote Control battery

compartment door with Philips screw driver and

insert batteries as shown. Replace door and

tighten screw.

INSTALLING REMOTE BATTERIES

+ AAA/LR03/R03 1.5V –

– AAA/LR06/R03 1.5V +

– AAA/LR03/R03 1.5V +

LiPo BATTERY

1 While HOVERING,

press and hold the STUNT

BUTTON.

2 Move the DIRECTION STICK (Right or left)

to start drone rotation.

3 Press the RECORD BUTTON on your

smart device to start recording. Press again to

stop recording.

360˚ PANORAMIC VIEW ROTATION

7 SEC

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 3 / PAGE 8

IMPORTANT: YOU ONLY HAVE A FEW

SECONDS AFTER THE LIPO BATTERY IS

PLUGGED IN TO PLACE DRONE ON A

LEVEL SURFACE FOR PROPER CALIBRA-

TION. IF DRONE DOES NOT RISE TO A

STABLE HOVER OR FLIES ERRATICALLY,

REPEAT STEPS 1 THROUGH 6.

CAUTION: NEVER APPROACH DRONE

WHILE THE PROPELLER BLADES ARE

STILL SPINNING. THROTTLE DOWN UNTIL

THE BLADES STOP THEN TURN OFF

REMOTE BEFORE ATTEMPTING TO

HANDLE DRONE.

FLIGHT SENSITIVITY ADJUSTMENT

CALIBRATING & LAUNCHING

Drone responsiveness may be adjusted on the

Controller to match your ying skills.

There are three choices:

1. BEGINNER – 2. INTERMEDIATE – 3. ADVANCED

It is best to start in BEGINNER MODE 1 until you

have mastered ying. Flight sensitivity can be adjusted

before or during ight.

IMPORTANT: Advanced Mode 3 is a

performance ight setting for OUTDOOR USE

ONLY. Blade guards and camera module

MUST BE REMOVED for proper ight opera-

tion in Mode 3.

1 - BEGINNER

2 - INTERMEDIATE

3 - ADVANCED

1 Turn OFF Remote Control.

2 Disconnect the LiPo battery connectors hanging

out from the back of the drone.

Pull connectors, not wires.

3 Reconnect battery connectors.

4 Quickly place Drone on FLAT LEVEL

SURFACE.

5 Turn Remote Control ON.

6 Slowly push remote control THROTTLE

STICK UP until Drone lifts into the air.

When launching the Drone, face the same direction as the Drone. Green blades should be in front.

Practice launching, hovering and landing before attempting to learn other moves.

Flying 2 to 3 feet above the ground will reduce ground turbulence and make ying easier.

When rst attempting to y in different directions, start by tapping the Direction stick until you have a

feel for it. Always move the controls slowly until you become comfortable operating the drone.

Once you’ve mastered ying in directions, practice Rotational controls. Spinning and keeping Drone

facing the same direction you are facing makes ying easier and more intuitive.

Stay 2 to 3 feet away from walls and ceilings as Drone will be drawn towards them if you y too

close.

If propeller blades come in contact with another object or you crash, throttle down immediately to

prevent possible or further damage.

If anything prevents Drone’s blades from spinning or they become jammed, THROTTLE DOWN

IMMEDIATELY. Do not attempt to y until obstruction has been removed and damage xed.

Should something prevent Drone’s blades from spinning, Drone may AUTO SHUTDOWN. LiPo

battery will need to be unplugged then reconnected to restore ying power.

t If the Drone ies too far away, beyond the control range of the remote, the Drone will

AUTO-LAND to prevent the Drone from ying away out of control.

FLYING TIPS

Drone drifts forward

– Press the B button

Drone drifts backward

– Press the F button

Drone drifts to the left

– Press the R button

Drone drifts to the right

– Press the L button

Drone spins counter-clockwise,

when viewed from the top

– Press the button

Drone spins clockwise, when

viewed from the top

– Press the button

If Drone drifts in any direction while hovering (and you are not pressing the Direction stick),

you may need to make trim adjustments. Safely land Drone on a level surface. Press the

recommended Trim button once as described below. Launch the Drone back into the air and

attempt another still hover. If Drone continues to drift, repeat the process until a still

hover is achieved:

TRIM ADJUSTMENTS

NOTE: THE REMOTE WILL BEEP/FLASH 3 TIMES WHEN TRIM ADJUSTMENT

IS SET TO THE NEUTRAL POSITION (THE MIDDLE OF THE TRIM RANGE) AND

BEEP ONCE WHEN IT HAS REACHED THE END OF IT’S RANGE.

REMOVING & REATTACHING

CAMERA MODULE

The Camera Module is easily removed to improve ight

performance. Simply unplug the camera connector and slide the

camera module forward to disconnect from drone. To reconnect,

simply clip camera module back onto drone and plug in the wire

connector.

7 4

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 7 / PAGE 4

To make the Drone LIFT

, press the THROTTLE STICK FORWARD.

The further you PUSH

the THROTTLE STICK, the faster you LIFT.

To make the Drone HOVER

, nd the sweet spot on the THROTTLE STICK

(somewhere in the middle).

Push the Direction stick

FORWARD to y forward or away from you (Green blades in front).

Push BACKWARD

to y backward.

The farther you push, the faster Drone ies in that direction.

Push the Direction stick LEFT

to y left. Push RIGHT to y right.

The farther you push, the faster Drone ies sideways.

Press UP

to fly forward

Press LEFT

to fly left

Press RIGHT

to fly right

Press DOWN

to fly backward

Press UP

to lift

Press LEFT

to rotate counter-clockwise

Press RIGHT

to rotate clockwise

Press DOWN

to descend

STUNT Button

Flight Sensitivity Switch

Rotation Trim

Smart Device Holder

DIRECTION STICK

THROTTLE/

ROTATION STICK

THROTTLE/ROTATION STICK

Familiarize yourself with Drone’s

controls before ying!

FLIGHT CONTROLS

Forward/Backward Trim

Power indicator LED

Power On/Off Switch

Left/Right Trim

(BLADE GUARDS & CAMERA

MODULE MUST BE REMOVED

FOR MODE 3 FLIGHT)

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 5 / PAGE 6

To make the Drone LIFT, press the THROTTLE STICK

FORWARD.

The further you PUSH the THROTTLE STICK,

the faster you LIFT.

To make the Drone HOVER, nd the sweet spot on the

THROTTLE STICK

(somewhere in the middle).

Push the Direction stick FORWARD

to y forward or away from you (Green blades in front).

Push BACKWARD to y backward.

The farther you push, the faster Drone ies in that direction.

Push the Direction stick LEFT to y left. Push

RIGHT to y right.

The farther you push, the faster Drone ies sideways.

Press UP

to fly forward

Press LEFT

to fly left

Press RIGHT

to fly right

Press DOWN

to fly backward

Press UP

to lift

Press LEFT

to rotate counter-clockwise

Press RIGHT

to rotate clockwise

Press DOWN

to descend

STUNT Button

Flight Sensitivity Switch

Rotation Trim

Smart Device Holder

DIRECTION STICK

THROTTLE/

ROTATION STICK

THROTTLE/ROTATION STICK

Familiarize yourself with Drone’s

controls before ying!

FLIGHT CONTROLS

Forward/Backward Trim

Power indicator LED

Power On/Off Switch

Left/Right Trim

(BLADE GUARDS & CAMERA

MODULE MUST BE REMOVED

FOR MODE 3 FLIGHT)

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 5 / PAGE 6