Skypower Wireless EZ-233 EZtalk Bluetooth Headset User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	350611
Application ID	V1wAqR1bPxVU7vTO8SYSZA==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.18kB (227222 bits)
Date Submitted	2003-08-25 00:00:00
Date Available	2003-08-25 00:00:00
Creation Date	2003-08-04 18:38:48
Producing Software	Adobe PDF library 5.00
Document Lastmod	2003-08-04 18:38:56
Document Title	manual
Document Creator	Adobe Illustrator 10.0

http://www.skypower.com
Bluetooth
Wireless
Headset
User Guide
Skypower Wireless Ltd.
5/F., Pao Cheong Comm. Bldg., 29 Prat Avenue, TST,
Kowloon, Hong Kong
Table of Content - English
Product Overview
Introduction
Quick Start
Recharging the Battery
Using EZtalk
Additional Information
Product Overview - EZtalk Bluetooth Headset
Introduction
Skypower's hands-free headset is a Bluetooth certified V1.1
headset. It is the first Bluetooth headset available that links
to any mobile phone that is Bluetooth V1.1 compatible
with headset profile, allowing you full flexibility to choose
your own preferred Bluetooth mobile phone.
If your mobile phone does not yet support Bluetooth - you
can still connect Skypower's headset to your mobile phone,
simply by ‘Bluetooth-enabling’ your mobile phone with a
proper Bluetooth adaptor (for best results and long-term
reliability, purchase the original Bluetooth adaptor from
Skypower* ).
Bluetooth
transceiver
Off/Volume
LED
Indicator light
USB
charging
connector
Omni-directional
Microphone
On/Call /Pairing
*Available product. To be purchased separately
Quick Start
Recharging the battery
Before placing your first call - you must first recharge the
battery, and thereafter ‘pair’ your headset with your
Bluetooth mobile phone. Details follow below.
A high density Li Polymer battery built-in the headset
allows you maximum talk time between recharges.
In addition, Skypower's Bluetooth module is outstanding in
its low power consumption even in standby mode, allowing
you more hours of usage between recharges.
To recharge - simply connect the AC/DC adaptor* to the
socket of the headset. The LED will light RED continuously
until the battery is fully charged. When the LED turns
GREEN - the battery is fully charged and you may
disconnect the charger. Note: If the LED blinks RED or
GREEN (rather than being continuous) - it shows you that
the headset is ON, and ready to receive a call (even while
being recharged).
Warning!
Do not leave the battery discharged.
Make sure to recharge the battery every 2-3 weeks (if not in
daily use).
*Use only the AC/DC adaptor provided.
Switch ON
Press and hold headset ON button for about 3 sec. until you
see the LED blinking YELLOW (you hear two tones, low
and high). Then release the button.
The headset tries now to link up with the Bluetooth mobile
phone:
If successful, the LED on the headset blinks GREEN*
(indicating that the headset is ready for a call (i.e. in
standby).
Switch OFF
Press and hold headset OFF button for about 3 sec. until you
hear a short high tone followed by a longer low tone. LED
goes off.
Low battery indication
When the battery is low and requires recharging, the LED
flashes RED (rather than GREEN) and a double high tone
alerts you every 1 min.
Making a call
(a) By Dialing from mobile phone
Dial* from the mobile phone as you normally would
(key-in the number, or dial from phone’s memory).
When the other party answers - simply talk.
When you finish your call - just ‘hang-up’ by shortly
pressing again ON button of the Headset.
(b) By Voice Command (for mobile phones that support this
feature)
Press shortly twice ON button of the Headset. You hear
a command confirmation tone. Release button and wait
until you hear 'low, high' tones. Then say the name loud
and clear, into the headset's microphone (as you
normally would 'voice dial' on your phone).
(c) When you finish your call, press ON button of the
Headset shortly. Note for NOKIA phones only - you will
also see a message 'DISCONNECTED' on the phone",
after about 10 seconds.
*For Nokia bluetooth phones, press shortly once the ON button of
headset, wait for connection, then dialing the number on the phone.
Lost connection - warning and automatic re-link
If, for whatever reason, the connection is lost between the
headset and the Bluetooth phone (or adaptor) - the LED
flashes YELLOW and two short beeps sound. At that time
the headset starts attempts to connect back to the phone. The
YELLOW blink (and the beeps) repeat themselves until the
link is successfully restored*. If no link is restored within 3
minutes, the headset power shuts OFF automatically.
Using EZtalk
Pairing the Headset with the Bluetooth mobile phone
‘Pairing’ is a Bluetooth common term for the simple setup
of matching your headset with your phone, so that your
headset will ‘listen’ only to your mobile phone (and not to
others), and your mobile phone will ‘talk’ only to your
headset (and no one else can listen to your conversation).
To pair - proceed as follows:
1. Make sure that the headset is powered OFF.
2. Press and hold ON button of the Headset for more than 8
sec. At first you see the LED blinking YELLOW (you
hear two tones, low and high), but after a few more
seconds it changes to blinking RED and GREEN
alternatively (you hear 3 high tones). Now you can
release the button. The headset is ready for pairing.
3. Activate the Bluetooth on the mobile phone (or the
adaptor), initiate the ‘discover’ function and continue the
pairing as per the instructions given by your Bluetooth
phone /adaptor manufacturer). Note that when you are
asked to enter the passkey of the headset - use 0000
4. If the pairing is successful - you will get such message on
your mobile phone, while in parallel the LED on the
headset blinks GREEN*, indicating that the headset is
ready for a call (i.e. in standby).
5. If the pairing is not successful for 3 minutes - the headset
shuts down (to save power). To try again to pair - repeat
from step 1.
Receiving a call
When there is an incoming call, press ON button of the
Headset shortly to take the call, then wait for a short while
before talking.
When you finish your call - 'hang-up' by shortly pressing
'ON' button of the Headset. Note for NOKIA phones only you will also see a message 'DISCONNECTED' on the
phone, after about 10 seconds.
Transfer of sound from phone to Headset:
Occasionally when you make a call, or receive a call, the
phone does not transfer the sound to headset. To transfer the
sound - press twice on ON button of the Headset.
Transfer of sound from Headset to phone:
Please refer to the instruction in the user guide of the phone
as this feature is controlled by the phone, and not the
headset.
*With some models of phones, the YELLOW blinking may
change back to GREEN blinking, although the link is not
restored. In such case, simply power OFF your headset,
power it ON again, and double-click the ON button of the
Headset.
Some countries/states do not allow the exclusion or
limitation of incidental or consequential damage, or
limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer’s
statutory rights under national legislation in force, nor does
it affect the consumer’s rights against the dealer arising
from their sales/purchase contract.
11
Important notice! This User Guide is updated to
the date of its printing. There may have been new
software releases requiring certain changes in the
product operation from what is described above.
Therefore, in the event that you notice a
difference between what the response of the
headset is, compared to what this guide says, then
please refer to the most updated User Guide
available on our Internet Site www.skypower.com
*or red, if the battery is low.
**If you don't want to accept connection manually, simply go to
"View paired device" in the Bluetooth menu, select "EZtalk" - the
one you paired, press "Option" and go to "Request conn.
Authorization" and select "No". Then the connection will be
connected automatically whenever you press once the ON button.
Volume control of tones
The volume level of the beeps can also be adjusted. In
standby mode - press button VOL of the Headset. Each time
you press the button, volume changes from LOW to
MEDIUM to HIGH and back.
Test status - Check whether you are ON
While having the headset on you for a while, you may
wonder whether your headset is ON or OFF (as you may
have left it OFF, or pushed the OFF button by mistake, or
ran out of battery, etc.). Skypower allows you to check the
status easily and put you at ease. Simply press shortly
button VOL of the headset (while in standby mode). If the
headset is ON - you hear two short beeps. If you hear
nothing – you know your headset is OFF.
Volume control of voice
The headset allows volume adjustment by user. To adjust the
volume press shortly button VOL on the Headset when you
talking (i.e. call in progress) . Each time you press the
button, volume changes from LOW to MEDIUM to HIGH
and back (only in talk mode). The volume level set, is
indicated by tones (one beep indicating LOW level, two
beeps - MED and three beeps - HIGH).
Additional Information
Limited Warranty
Skypower warrants this Product to be free from defects in
material and workmanship at the time of its original
purchase by a consumer, and for a subsequent period of one
(1) year.
If, during the warranty period, this Product fails to operate
under normal use and service, due to improper materials or
workmanship, Skypower subsidiaries, authorized
distributors or Skypower Service Partners will, at their
option, either repair or replace the Product in accordance
with the terms and conditions stipulated herein.
Important!
For Nokia Bluetooth phones only
- Before pairing, please check and delete all previously
paired devices from the "View paired devices" of the
"Bluetooth Menu".
- After pairing is successfully completed - you will see on
the phone's screen "Paired with EZtalk". Now you can
use your EZtalk Bluetooth Headset to make phone call or
receive call.
- If your phone is not operational within 10 seconds after
pairing, you will see the message "Disconnected" on the
screen but you can still make or receive a phone call. If you
want to make a phone call, press the "ON" button once. You
will be asked by the phone "Connect with EZtalk?"**, press
"Accept" and wait for the connection, you will see
"Connected to EZtalk", then make call.
Conditions
The warranty is valid only if the original receipt issued to
the original purchaser by the dealer, specifying the date of
purchase and serial number, is presented with the Product to
be repaired or replaced. Skypower reserves the right to
refuse warranty service if this information has been
removed or changed after the original purchase of the
Product from the dealer.
This warranty does not cover any failure of the Product due
to normal wear and tear, or due to misuse, including but not
limited to use in other than the normal and customary
manner, in accordance with Skypower's instructions for use
and maintenance of the Product. Nor does this warranty
cover any failure of the Product due to accident,
modification or adjustment, acts of God, improper
ventilation or damages resulting from liquid.
This warranty does not cover Product failure due to
improper repair installations, modifications or service
performed by a non-Skypower Service Partner or opening of
the Product by non certified persons.
THERE ARE NO EXPRESS WARRANTIES, WHETHER
WRITTEN OR ORAL, OTHER THAN THIS PRINTED
LIMITED WARRANTY. ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY. IN
NO EVENT SHALL SKYPOWER BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF
ANY NATURE WHATSOEVER, INCLUDING BUT NOT
LIMITED TO LOST PROFITS OR COMMERCIAL LOSS,
TO THE FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
10
FCC statement
This device complies with part 15 of FCC rules.
Operation is subject to he following two conditions :
(1) this device may not cause harmful interference and
(2) this device must accept any interference received
including interference hat may cause undesired operation.
Caution: Changes or modifications not expressly approved
by Skypower will void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
All right reserved.
Skypower Wireless Ltd.
Publication number: UG-EZ232-030612(en)
12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:08:04 18:38:56+08:00
Create Date                     : 2003:08:04 18:38:48+08:00
Creator                         : Adobe Illustrator 10.0
Creator Version                 : 10
Container Version               : 9
For                             : id man, id valley
Title                           : \\Def-pvmuyakfll7\Ken\stan Folder\ezt2 user guide05 copy.pdf
Bounding Box                    : 52 32 873 2018
Page Count                      : 1
Producer                        : Adobe PDF library 5.00
Creation Date                   : 2003:08:04 18:38:48+08:00
Mod Date                        : 2003:08:04 18:38:56+08:00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2003:08:04 18:38:56+08:00
Image Height                    : 1986
Image Width                     : 821
Image Size                      : 821x1986
Megapixels                      : 1.6

EXIF Metadata provided by EXIF.tools