Skytech II LEVEL2TX Remote Control Transmitter User Manual
Skytech II, Inc. Remote Control Transmitter Users Manual
Users Manual
Dexen Level 2 User’s Manual
Transmitter –Dexen Level 2
This remote control SYSTEM offers
the user a battery-operated remote
control that operates most millivolt
gas valves used in some heater
rated gas logs， gas fireplaces and
other gas heating appliances.
The transmitter operates on (2) 1.5V
AAA batteries.
It is recommended that ALKALINE
batteries always be used for longer
battery life and maximum
operational performance.
Before using the transmitter， install the (2) AAA transmitter batteries into the battery compartment. (Use
caution that batteries are installed in the proper direction)
KEY SETINGS
- Operates unit to on/off
position， Manually ON/OFF.
- Operates unit to
flame position for Hi / Middle / Low.
- Operates unit to
enable/disable Continuous Pilot.
- Operates unit to lock /
unlock the key pad behind the
transmitter.
Note: The indicatory LED will be shined by key pressed during the key unlock.
15.19 FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
15.21 Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
ON OPERATION
Press the key the appliance flame will come on.
OFF OPERATION
Press the key again the appliance flame will shut off.
High / Low OPERATION
When the Key is first pressed the output will be on High. Then the key is pressed
again that will change into Low. A second push will turn the burner/valve into High.
Continuous Pilot OPERATION
When the key is first pressed the output will enabled continuous pilot. Then
the key is pressed again that will disabled continuous pilot.
Key Lock OPERATION
When the key is first pressed all the function key will be locked. Then the
key is pressed again that will be unlocked.
¾ FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.