Skytech II SP1001TH REMOTE CONTROL TRANSMITTER User Manual WinFaxViewer

Download:
Mirror Download [FCC.gov]
Document ID	543977
Application ID	ge0SrABx0kOMUpSQociYDQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.41kB (105182 bits)
Date Submitted	2005-05-20 00:00:00
Date Available	2005-05-20 00:00:00
Creation Date	2005-05-17 20:40:26
Producing Software	Acrobat PDFWriter 5.0Windows NT ª©
Document Lastmod	0000-00-00 00:00:00
Document Title	WinFaxViewer
Document Creator	WinFax PRO Preview - 5617015
Document Author:	MLT

TRANSMITTER
FRONT BACK
<—®
<—®
<©
<—®
LCD Quid CflalD'gglay
This remote control SYSTEM offers the user a batteryeperated remote Control that
operates most millivolt gas valves used in some heater rated gas logs. gas fireplaces
and othergas heating appliances.
The transmitter operates on (2) fiiAAA batteries.
It is recommended that ALKALINE batteries always be used for longer battery life and
maximum operational performance.
Before using the transmitter. install the (2) AAA transmitter batteries into the battery
compartment. (Use caution that batteries are installed in the proper direction)
K‘SETINGS
- ON Operates unit to on position. Manually ON.
- OFF operates unit to off position. Manuaiiy OFF.
' MODE Changes unit from manual mode to theme mode.
' SET Gets temperature in Ihermc mode.
1 DISPLAY Indicates CURRENT room temperature.
2 " F OR “c indicates degrees FahrenheltorCeIslus.
3 FLAME Indicates burnertlalve in operation.
a ROOM Indicates remote is in THERMO operation.
5 TEMP Appears during manual operation.
6 SET Appears during time the ofsetting the desired temperature in
the thermo operation.
SCREEN WHILE SCREEN AFTER 3
DEPRESSING ON SECOND DEFAULT
KEY
SCREEN AFTER 3
SCREEN WHlLE SECOND DEFAULT
DEPRESSING OFF
KEY
mu \\\‘
THERMO SET THERMD MODE
THERMO ON THERMO OFF
55mm; " F I ”c SCALE
The factory setting rortemperature is n F. To change this setting to E'C. first
' Press the ON keys and the OFF key on the transmitter at the same time this
will changefitm F to ° c. Follow this same procedure to change from "
c back to ° F.
MANUAL FUNCTION
To operate the system in the manual “MODE" does the following.
ON OPERATION
Press the m key the appliance flame will come on. During this time the LCD
screen will show ON, after 3 seconds the LCD screen will default to display
room temperature and the word TEMP will show. (Flame icon will appear on
LCD screen in on mode)
OFF OPERATION
Press the OFF Key the appliance flame will shut off. During this time the LCD
screen will show OF, after 3 seconds the LCD screen will default to display
room temperature and the word "TEMP" will also show on the screen.
THERMOSTAT FU NCTION
SETTING DESIRED ROOM TEMPERATURE
This remote control system can be thermostatically controlled when the
transmitter is in the THERMO mode lThe word ROOM must be displayed on
the screen). To set the THERMO MODE and DESIRED room temperature.
Press the MODE key until the LCD screen shows the word ROOM then the
remote is in the thermostatic mode.
Press and hold the g Key until the desired settemperature is reached. (By
pressing and holding the set key the LCD screen set numbers will increase
from 45 to 99°ther| restart over at 45“) Next release the fikey. The LCD
screen will display the set temperature for 3 seconds and the LCD screen will
flash the set temperature for 3 seconds, then the LCD screen will defaultlo
display the room temperature.
TO CHANGE THE SET TEMPERATURE
Press and hold the g Key until the desired set temperature is reached. (By
pressing and guiding the set key the LEGO screen set numbers will increase
from A5 to 99 then restart over at 45 ) Next release the E key. The LCD
screen will display the set temperature for 3 seconds. then will flash the set
temperature for 3 seoonds, then the LCD screen will default to display the room
temperature.
Press the MODE key to disengage the thermo mode. The word ROOM on the
LCD screen will not show when the thermo is not in operation.
NOTE: The highestSET temperature is 99" Fahrenheit (32“ Celsius) and the
lowesttemperature is (45° Fahrenheit (6° Celsius)
This device complies with PartlS of the FCC Rules,
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any inteIference received, including,
Interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT, SUCH
(MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 3
Creator                         : WinFax PRO Preview - 5617015
Create Date                     : 2005:05:17 20:40:26
Title                           : WinFaxViewer
Author                          : MLT
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©

EXIF Metadata provided by EXIF.tools