Sleep Number 3000G Part 15 Low Power Communication Device Transmitter User Manual 59975Cov JR indd

Download:
Mirror Download [FCC.gov]
Document ID	863352
Application ID	w+6dYqx2jD8k8GQ2gKhCow==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	82.01kB (1025158 bits)
Date Submitted	2007-11-02 00:00:00
Date Available	2007-11-02 00:00:00
Creation Date	2007-10-08 14:20:16
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-10-08 14:26:05
Document Title	59975Cov_JR.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	hobbes

10 VERIFY BORDER
WRAP POSITIONING
Important Notice: To ensure compliance with federal and state
flammability requirements, the border wrap must be positioned
correctly within the mattress as shown in the steps below.
Verify that the border wrap
extends over the Intralux®
foam comfort pad.
11 MATTRESS COVER
Zip the top of the
mattress cover.
Store air chamber caps inside
mattress at head of bed.
Color and pattern may vary.
YOU’RE DONE! NEXT STEP X
THE FIRMNESS CONTROL™ SYSTEM
19
Mattress
Frequently
Asked Questions
20
Where are the caps
for air chamber(s)?
And where should I
store them?
The caps are in the Firmness Control™ System box. Please
store these in the mattress cover in case you should ever want to
disassemble your bed and temporarily cap your air chamber(s).
What if my Intralux®
foam comfort pad
appears to be too
small or irregular?
Gently shake the pad as you place it on your mattress and it will
recover its full size overnight.
What do I do if the
Firmness Control™
System doesn’t run?
Make sure the power cord is securely plugged into the Firmness Control™
System and the wall outlet. Check to see if the power cord is plugged into
an outlet that has power and is not connected to an on/off wall switch.
What if I feel like I’m
rolling toward the edge or
toward the center of the
mattress?
Although rare, these sensations could potentially be experienced
if one side of the mattress is set quite firm and the other side quite
soft. Call Customer Service for a remedy to this situation if it is
bothersome to you.
What if I notice a rubber
smell from the air
chamber?
The odor you may smell is non-toxic and will fade over time.
To minimize the smell, allow the air chamber to air out for a few hours
and then lay a couple of dryer sheets on top of the air chamber.
Will my bed deflate if
there is a power surge or
power loss?
No, your mattress will maintain its firmness. To protect your Firmness
Control™ System, we do recommend using a surge protector.
The mattress is losing air.
What should I do?
The air loss could be caused by either the air chamber or the Firmness
Control™ System. To determine which component is causing the air loss,
follow these troubleshooting steps:
• Inflate the side of the bed that is losing air to the preferred
SLEEP NUMBER® setting plus five (i.e., if you sleep at a setting of 40,
inflate the bed to 45).
• Locate the caps, and cap the side of the bed that is losing air. The
assembly instructions suggested storing the air chamber caps in the
mattress cover, at the head of the bed, where the zipper starts/ends.
• Leave the air chamber capped for at least eight hours. It is preferable
to cap it overnight while sleeping on it.
• Contact Customer Service with the results of the troubleshooting. They
will facilitate a component replacement under the terms of the warranty.
21
Mattress
Frequently
Asked Questions
Why are there body
impressions on the
mattress cover?
For the best looking, most crisp appearance, customers
should fully inflate the mattress (100 if using a digital Sleep Number®
remote). If going to full inflation does not help with body impressions
in the cover, the quilted top can be removed and shaken to restore
some of the loft to the fiberfill. In addition, a vacuum nozzle may be
used to fluff the cover in areas where the fibers have settled from use.
Body impressions in a normal innerspring mattress would be an
indication that the spring support is compressing or breaking down.
The Sleep Number® bed uses air to support your body. Since air
cannot break down, you receive the same support after years of
use as you do on the first day of use.
Please contact Customer Service with further questions.
If you still have questions or need assistance, look for answers on our Web site
sleepnumber.com or please call Customer Service at 1.800.472.7185
22
Firmness
Control System
™
23
24
- Vicky Hendricks, Hartford, KY
“ I had forgotten what it feels
like to wake up feeling good and
with energy. Sleeping on the
Sleep Number bed has made
a big difference. Thank you for
making me feel good again.”
For answers to some common
questions regarding your
Firmness Control™ System, see
the Frequently Asked Questions
at the end of this section.
TROUBLESHOOTING
If you are missing any items
listed on the following page,
please e-mail Customer
Service at customerservice@
selectcomfort.com or call
1.800.472.7185
™
If your model came with one remote for a dual chamber bed,
the “L” button on the remote corresponds to the left side of the
bed (left is determined when lying on your back on the bed).
If you purchased a dual chamber model, you have the ability to
personalize each side of your SLEEP NUMBER® bed. Since no two
body types are the same, each sleep partner should find their
own comfort level.
Dual Adjustability
- to facilitate getting out of bed, if needed
- to achieve a fuller bed appearance
as well as
- new sleep position
- strained muscles
- back pain
- weight change
- pregnancy
- sunburn
Reasons to alter the firmness of your bed
THINGS TO REMEMBER
Firmness
Control System
SM
• Your pillow makes your head tilt at an angle to
the rest of your body.
• You feel discomfort from pressure at your neck,
shoulders, back, hips or legs.
• You feel the mattress support the small of your back
(back sleepers) or the curve of your side (side sleepers).
• Body alignment is not straight.
WRONG
• No discomfort at shoulder and hip pressure points.
• Neck and back are aligned in the same position as
when you are upright.
RIGHT
As you are customizing the Sleep Number® bed for your optimum comfort level, you will want to evaluate your
sleep position and determine how you feel as compared to the diagrams below, then make adjustments to your
firmness or pillow if needed. Your pillow should help keep your body aligned properly, otherwise it may interfere
with your ability to sleep comfortably. Visit sleepnumber.com or one of our stores to get a PillowFit profile and
see the extensive selection of innovative pillows we carry for all sleep positions and fill preferences.
EVALUATING YOUR COMFORT LEVEL
mattress. If you don’t have your Sleep Number® setting, this section will take you through the process of finding
your Sleep Number® setting and will provide you with additional information about your Sleep Number® bed.
If you don’t already have your Sleep Number® setting or if you would like to experiment with finding a different
Sleep Number® setting, use the instructions below.
When you shopped for The Sleep Number Bed by Select Comfort™, you may have discovered your
Sleep Number® setting. You should use this as a starting point when setting the firmness of your Sleep Number®
YOUR SLEEP NUMBER® SETTING
Your Sleep Number® is a setting between 0–100 that represents the ideal combination of mattress
comfort, firmness and support for your body, giving you the best night’s sleep possible.
WHAT IS A SLEEP NUMBER® SETTING?
25
26
- Mr. & Mrs. Sal Oliveri,
Paramus, NJ
who is looking for a luxurious,
comfortable sound sleep.”
back—he has back problems—
in five minutes lying down.
We recommend it to everyone
it at your store. It relieved the
pressure off my husband’s
“ We were instantly sold on
your mattress when we tested
If, after trying four different Sleep Number® settings, you have not found
your ideal Sleep Number® setting and would like additional assistance, go
to sleepnumber.com and click on Customer Center or call 1.800.472.7185
to reach a Customer Service Representative. Our trained Customer Service
Representatives may be able to recommend adjustments, make suggestions
or pinpoint concerns that might be contributing to less than ideal comfort.
Improving your sleep is our expertise.
your sleep journal, adding comments if helpful. Repeat the process until
you have found the perfect setting for you.
setting for three to four nights, adjusting in increments of 5 or 10 only. It will
take your body that long to become accustomed to a new sleep surface.
After five nights, reevaluate your comfort level and log the new setting into
sleep journal. When you have found a Sleep Number® setting where you
feel comfortable, log this number into your sleep journal. Use pages 30–31
in this booklet to log your information. Try to sleep at this Sleep Number®
It sometimes takes several nights of sleeping at different settings to
discover your ideal Sleep Number®. If you would like to experiment further
with your Sleep Number® setting, you may want to consider keeping a
GIVE IT TIME
Memory
Fill
Memory
Fill
wakes when any
button is pressed
wakes when any
button is pressed
wakes when L or R
button is pressed
Firmer
Side
Softer
Dual Chamber
Single Chamber
Firmer
Softer
9000 wireless
9000 wireless
9000 wired
Firmer
Softer
wakes when L or R
button is pressed
wakes when any
button is pressed
wakes when any
button is pressed
Memory
Fill
Memory
Fill
Firmer
Side
Softer
Dual Chamber
Single Chamber
Firmer
Softer
7000 wireless
7000 wireless
*Caution Statement: (per CFR 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate
the equipment.
Device Statement: (Section 15.105 (b) of the FCC Rules) “Note: This equipment has been tested and found to comply with the limits, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
For wireless remotes: A 9-Volt battery is included and should last about six months under normal use.
Replace the battery when the low battery indicator is displayed.
Memory
Fill
Memory
Fill
Firmer
Softer
7000 wired
IDENTIFY YOUR REMOTE
AND ITS FUNCTIONS
27
Press to choose a side, it will display the previous Sleep Number® setting.
This will allow you to inflate one or both chambers to a Sleep Number® of I00
Side (L) and (R)
Fill
28
Memory
Press and release the p or q button several times until desired Sleep Number®
is displayed. Adjustments will begin after a slight delay.
Firmer p
Softer q
The first press of the button will display the current Sleep Number® set in
memory. The second press of the button will adjust the bed to the memory
setting. As the adjustment is taking place, the number displayed and tick
marks will indicate the change.
- Press the Memory button 2 times within 5 seconds
Wired Remote
- Press L or R on the side you would like to recall
- Press the Memory button 2 times within 5 seconds.
Wireless Remote
RECALLING MEMORY
- “Memory Set” will appear above the Sleep Number® when it’s set.
- Press and hold the Memory button for 3 seconds
- Press up or down arrow to wake up the remote
- Adjust the bed to the Sleep Number® setting you’d like as your memory setting
Wired Remote
- Press and hold the Memory button for 3 seconds
- “Memory Set” will appear above the Sleep Number® when it’s set.
- Press L or R to choose a side and wake up the remote
- Adjust the bed to the Sleep Number® setting you’d like as your memory setting
Wireless Remote
SETTING MEMORY
and recall it at any time.
This feature allows you to set your favorite Sleep Number® setting into memory
To stop the fill feature at any time, press any button on the remote.
- T
To fill the second chamber, using the other remote, press and hold Fill for at
least 2 seconds. This chamber will fill to I00 when the first chamber is full.
- Select one remote. Press and hold the Fill button for at least 2 seconds
Wired Remote
to select a side. Press and hold Fill button for at least 2 seconds.
-T
To fill both chambers press and hold the Fill button for at least 2 seconds
- T
To fill one chamber press any button to wake up remote, then press L or R
Wireless Remote
FUNCTION
BUTTON
Step 1
Step 2
Step 3
Step 4
Step 5
Sleep Number® setting will be displayed.
Step 6
90%
of couples don’t agree on
mattress firmness





®

Sleep Number setting

setting between 35–50.


As you can see, Sleep Number® bed owners
find comfort at all settings from 0–100, however
the majority of sleepers find their Sleep Number®
Because most couples disagree on mattress
firmness, the Sleep Number® bed adjusts on both
sides. You can each find your ideal comfort level—
your Sleep Number® setting—at the touch of a
button.
Sleep Number® Setting study
One Bed, Two Sleep Number® Settings
- T
Try this Sleep Number® setting for a minimum of five nights, then reevaluate
and make adjustments accordingly.
- Your setting will be displayed for five seconds.
Repeat until you have reached your desired level of comfort. Your new
- Press and hold or tap the firmer or softer buttons and let the bed adjust.
- If you have a dual chamber model press L or R to choose a side.
- Evaluate your comfort level.
holding your remote.
- Lie on one side of the Sleep Number® bed in your normal sleep position,
FINDING YOUR SLEEP NUMBER® SETTING
Percent of people at sleep setting
29
Firmness
Control System
Frequently
Asked Questions
™
The wireless pump
remote is displaying “Er.”
What is the problem?
An “Er” can be caused by several factors. The Firmness Control™ System
base may not have power, or the remote and Firmness Control™ System
base may have lost communication with one another.
• Make sure the Firmness Control™ System is firmly plugged into a working
outlet and is receiving power. Is the outlet controlled by a wall switch?
With the 5000 model you will know that the unit has power if it “clicks”
when you plug it in.
• Make sure that the power cord is plugged into the side of the
Firmness Control™ System.
• Wait for the display to shut off (about 10 seconds). Then try to adjust
the bed again. But this time, move the remote control a few inches to
the left or right.
• Check for anything that may be causing interference. (HAM radios, baby
monitors, police scanners, garage door openers, etc.)
• If the “Er” persists call Customer Service at 1.800.472.7185.
30
Mattress
Care
25
60
31
MATTRESS CARE
The cover of your SLEEP NUMBER® mattress may be spot cleaned
with carbonated water. Do not dry clean the mattress cover or
put it in a washing machine. Also, please do not apply stain guard,
as it may cause yellowing of the fabric.
Select Comfort is a leader in the industry in the use of materials
designed to inhibit the growth of allergens or microorganisms
Creating a Healthy
Sleep Environment
that, in rare circumstances, can form inside any mattress, bedding,
pillow or upholstered product.
An estimated 50 million Americans suffer
Advanced antimicrobial safeguards are incorporated into every
steps you can take to create a healthy sleep
Sleep Number® bed. Key components of the mattress have been
environment include:
treated to protect the bed from contaminants such as mold,
mildew and bacteria growth. The unique, zip-open design of
the Sleep Number® bed allows you to easily open, ventilate
or vacuum if you choose.
In rare instances under the right conditions, mold or mildew can
form inside many types of mattresses, bedding or upholstered
products. Should this condition occur in your mattress, please
contact our customer service department so we can work with
you to return your bed to factory-fresh condition.
from allergies, and the bedroom presents some
especially difficult challenges. A few simple
• Use a dehumidifier to reduce any potential
mold or mildew growth. Keep humidity
levels under 60 percent.
• Use a high-quality mattress pad to protect
your mattress from moisture. You may want
to consider a waterproof mattress pad if
you perspire heavily while sleeping.
• Use allergen covers on pillows and
mattresses to reduce dust mites, which can
trigger allergies and asthma. Wash bedding
TRANSPORTING YOUR SLEEP NUMBER® BED
Your Sleep Number® bed is lighter than any conventional bed,
making it much easier to move.
Moving it yourself
• The foundation should always be disassembled. Bag all hardware
so that it is not lost.
• The cover and foam should all be double bagged to prevent stains.
• The chambers should be deflated and boxed to prevent possible
abrasions and other damage.
• The Firmness Control™ System should be packed in a box, surrounded
by some sort of packing material if the original box is not available.
• The remote, caps and instructions should be tucked
in the box with the pump to prevent them from being lost.
Using a moving company
• The foundation should always be disassembled. Bag all hardware
so that it is not lost.
• The mattress can be fully inflated, capped off, and should be packaged
in a mattress box for moving.
• The Firmness Control™ System should be packed in a box, with packing
material, and transported in a manner where it will be exposed to
minimal shock and vibration.
32
weekly in hot water.
• Vacuum the bedroom regularly, using a high
quality vacuum cleaner such as one with
a HEPA filter, one that does deep cleaning,
or a central vacuum system.
• Wait 20-30 minutes before making your
bed each morning, turning the covers back
and allowing the mattress to air out for a bit.
• If possible, avoid placing your bed on an
outside wall or above an air conditioning
or heating vent, which can cause condensation
and increase the likelihood of mold growth in
many mattresses.
• You could also use a high-quality electronic
air purifier to remove additional airborne
particulates from the bedroom.
• Please note: Ozone generators ARE NOT
recommended for use in the same room
with the Sleep Number® bed, as they can
degrade components of the bed over time.
Accessories
33
PERSONALIZED COMFORT FROM
HEAD TO TOESM WITH EXCLUSIVE
SELECT COMFORT® ACCESSORIES
Pillows
Our sleep-position pillows are available in memory foam, Intralux®
comfort material, 100% down, down blend or down-alternative fills. You’ll
be amazed at the difference a perfectly fitted pillow can make. We can
fit you with a comfortable, supportive pillow that fits your sleep position,
unique shape, and mattress firmness or SLEEP NUMBER® setting.
Blankets and Comforters
Experience all-season comfort with products designed to meet the
different warmth needs of every sleeper. Dual warmth items allow
couples to further customize their sleep.
Sheet Sets
Custom designed to fit your Sleep Number® bed, our sheet sets are
available in pima cotton sateen, luxurious Supima® cotton and our
finest Egyptian cotton. Available in a variety of colors.
Mattress Pads
Protect your investment with our high-quality mattress pads, and add
a layer of comfort and breathability to your Sleep Number® bed.
LOGICTM LABEL
The LogicTM Label takes guesswork out of
where to start making your bed. Instead
of trying to fit mattress pads or sheets
around the wrong bed corners and coming
up short, you’ll be guided with a simple
visual cue that perfectly positions all your
Sleep Number® bedding. Each bedding
accessory carries a small label to match
the one featured at the end of your
Sleep Number® bed—your bed linens
will be positioned correctly when all the
labels align.
34
Warranty and
Comfort Club®
80
35
“ We love our bed. Now all
of our friends are getting
Sleep Number beds and they
love them too. I just received
an email from a friend who
purchased a King Sleep Number
bed and finally found relief
from his back pain. What more
can we say than ‘Thank You’ for
this fabulous product. We’ll
never stop recommending
your beds.”
- Jolie C., Homewood, IL
DEFECTIVE OR DAMAGED COMPONENTS
If any component of the mattress or foundation is found to be defective
in materials or workmanship within first two years of the original purchase
date, they will be replaced by Select Comfort at no cost to you. Within the
first two years, all shipping charges to replace a defective component will be
covered by Select Comfort. If any component of the mattress or foundation
is found to be defective in materials or workmanship after two years from
the original purchase date, the terms of the Limited Warranty will apply.
After two years from the date of purchase, you will be responsible for the
cost of shipping the defective component back to Select Comfort and any
related costs. Contact our Customer Service Department at 1.800.472.7185
for troubleshooting assistance and if you need to process the replacement
order. We recognize the fact that components may break, become soiled
or unusable and may not be covered under the warranty. As long as you
own our bed and can provide proof of purchase, you can purchase
replacement components. All component sales are final and carry a 2-Year
Limited Warranty from the purchase date. Product discounts and accessory
promotions do not apply to components. Call our Customer Service
department for current pricing and to process the component purchase.
RETURN POLICY
We hope you are completely satisfied with your SLEEP NUMBER® bed,
but if you decide to return the bed during the In-Home Trial, contact
Customer Service before packing your bed. All merchandise being
returned must be in good condition and be given a Return Merchandise
Authorization number from Customer Service, which will expire 30 days
from date of issue. All refunds will be issued to the original method of
payment within approximately 15 business days after all products have
been received at Select Comfort. All shipping and incidental charges to
return the bed are the customer’s responsibility.
36
LIMITED WARRANTY
What is covered:
• Select Comfort warrants that your mattress and/or
foundation will be free from defects in materials
and workmanship for a period of 20 years from the
original purchase date.
• Warranty is limited to product repair or
replacement only.
What is not covered:
• Conditions arising from normal wear and tear.
(Conditions arising from normal wear and tear include,
but are not limited to: mattress cover compression,
foam compression, or discoloration of components.)
• Damage from tampering with any component or
from opening the Firmness Control™ System.
• Damage from misuse or abuse of the warranted
product or component.
• Damage from laundering or dry-cleaning.
• Acts of God, such as but not limited to lightning
damage.
What you must do:
• Return the warranted product or component in sanitary
condition to an authorized SELECT COMFORT® service
center. Select Comfort will incur the cost of shipping up
to two years after the original purchase date; after two
years, the return shipping to Select Comfort will be at
the customer’s expense.
• Please telephone our Customer Service Department at
1.800.472.7185 to locate the nearest authorized service
center and arrange for the return of the warranted
product or component.
What we will do:
• Select Comfort, at its option, will repair or replace the
defective product or component at a cost to the original
purchaser based on the following table. The “price”
is the price of the defective product or component at
the time the warranty claim is made, or the price of
a comparable product or component if the original
product or component is no longer in production.
Years after purchase date
Original purchaser’s cost
Up to 2 years
No Cost
2-20 years
20% plus 4% of price for each year
from original purchase date.
• For example, if a warranty claim arises 12 years after
the original purchase date, the cost to the original
purchaser would be 68% of the price (that is, 20% plus
4% for each of the 12 years) and Select Comfort would
be responsible for the remaining 32% of the price.
• Select Comfort reserves the right to substitute
products or components of equal or better quality,
and to use or deliver refurbished products or
components in the repair or replacement of any
product under this Limited Warranty.
What will void this warranty:
• Tampering with any component or opening the
Firmness Control™ System and its hand control unit.
• Misuse or abuse of the warranted product
or component.
• Sale, transfer or other disposal of the warranted
product or component.
Limitations:
• Your exclusive remedy, IN LIEU OF ALL INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
INCLUDING FOR NEGLIGENCE, is limited to
repair or replacement of any product or component
deemed to be defective under the terms and conditions
stated above. Select Comfort will bear no other
damages or expenses.
• Customer maintains responsibility for installation of
parts replaced under terms of the warranty.
• Select Comfort reserves the right to refuse to repair
or replace any product or component that is returned
in an unsanitary condition.
• This Limited Warranty applies only to the product
as used in the United States and Canada. It is not
applicable in U.S. territories or other countries.
• This Limited Warranty is non-transferable.
• Repair or replacement of a product or component
under the terms of this Limited Warranty in no way
lengthens the Limited Warranty period.
• ANY IMPLIED WARRANTIES APPLICABLE TO THIS
PRODUCT, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE
DURATION OF THIS WRITTEN LIMITED WARRANTY.
Some states do not allow the exclusion or limitation
of incidental or consequential damages, or limitations
on how long an implied warranty lasts, so the above
limitations may not apply to you. This warranty gives
you specific legal rights and you may also have other
rights, which vary from state to state.
All claims relating to the Limited Warranty of
Select Comfort® products should be made by
contacting Customer Service at 1.800.472.7185
or writing to Select Comfort Customer Service,
6105 Trenton Lane North, Minneapolis, MN 55442.
37
COMFORT CLUB® REWARDS
It’s amazing how many SLEEP NUMBER® bed purchasers are referred to
us by family and friends! Chances are you will soon be telling someone
about the difference the Sleep Number® bed has made in your life. We
appreciate it when owners like you help us spread the word to others
about our revolutionary bed. It is our company’s mission to improve lives
by Revolutionizing the Way America SleepsSM— one bed at a time.
Tell Your Family and Friends and Earn Rewards!
As an owner, you are eligible to participate in our Owners-Only rewards
by Select ComfortTM, you can earn Comfort Club® Reward Certificates!
These certificates can be redeemed any time you shop with us — on
accessories such as pillows or mattress pads, or even toward the purchase
of another bed! Call 1.800.422.4204 for details.
Tell Us Why You Like Your Bed
We’d love to hear why you like your new Sleep Number® bed. If you have any comments about the product
and service you received, or suggestions as to how we might serve you better, please fill out the form on
this page and send it in.
Please tell us why you like your new Sleep Number Bed by Select ComfortTM.
Comments:
Remove entire page, fold, seal and mail.
program. Every time someone you refer purchases The Sleep Number Bed
Name
Email
Address
Bed model purchased
City/State/Zip
Your Sleep Number® setting
Phone
May we reprint your comments?
38
Another satisfied
Sleep Number bed owner
®
NO POSTAGE
NECESSARY
IF MAILED
IN THE
UNITED STATES
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO.6 MINNEAPOLIS, MN
POSTAGE WILL BE PAID BY ADDRESSEE
SELECT COMFORT CORPORATION
6105 TRENTON LANE NORTH
MINNEAPOLIS MN 55442
Help is just a click or
phone call away.
If you ever have product questions or need
additional assistance obtaining optimal
comfort, please visit us at:
sleepnumber.com
or call
1.800.472.7185
Representatives are available (CST):
110485
Monday–Friday
7am – 10pm
Saturday
8am – 5:30pm
Sunday
10am – 6:30pm
6105 Trenton Lane North, Minneapolis, Minnesota 55442

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:10:08 14:20:16-05:00
Modify Date                     : 2007:10:08 14:26:05-05:00
Metadata Date                   : 2007:10:08 14:26:05-05:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:66647871D375DC119D01B19683FAD8C2
Instance ID                     : uuid:a9012cdd-d2dc-4864-bbff-2e4246bca8cb
Derived From Document Name      : uuid:59d7e11f-5c13-4a18-8f43-297c82eefa62
Derived From Instance ID        : uuid:f439b53c-0bf8-4a95-8e29-e3d472018d0a
Derived From Document ID        : uuid:0d2ec36e-7a32-4102-a015-3ff9d8af9cea
Format                          : application/pdf
Title                           : 59975Cov_JR.indd
Creator                         : hobbes
Has XFA                         : No
Page Count                      : 19
Author                          : hobbes

EXIF Metadata provided by EXIF.tools