Slik U9000 Users Manual .p..
U9000 to the manual 45480ed7-3e6d-458e-be1b-8acb649a464b
2015-02-05
: Slik Slik-U9000-Users-Manual-536486 slik-u9000-users-manual-536486 slik pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
R U 9000 Specification Operating Instructions Length folded Congratulations on the purchase of a SLIK U 9000 Tripod. The SLIK Corporation has designed your tripod to be a sturdy, rugged, dependable product that will provide you with many years of satisfactory use. Please take a few moments to read this instruction sheet carefully so you can take full advantage of your Tripod's many fine features. Retain this instruction sheet in case you might want to refer back to it. Max. operating height Max. center column ext. Weight 590mm (23 1/4") 1,500mm (59 1/12") 300mm (11 5/6") 1.6kg (3 lbs 8 oz) Caution This caution icon refers to information pertaining to important safety procedures in preventing injuries, and damages which may occur as a result of mishandling this product. Prohibited This prohibited icon refers to information pertaining to prohibited contents. Please refer to instructions closely to avoid accidents. 7979E-1 Components Quick Release Lock Lever Quick Release Platform Pan Head Vertical Tilt Knob Center Column Locking Collar Elevation Crank Handle Panning Lock Knob Built in Level Center Column Pan & Tilt Handle Center Column Cover Retractable Camera Positioning Pin Camera Post Quick Release Platform Center Column Ring Equipment that can be used with this Tripod Caution Carrying the Tripod Prohibited Prohibited Leg Lock Leg Lock Lever Leg Brace Two way Rubber or Spike Leg Tip This product has been designed to handle equipment weighing under 2 kgs (4 lbs 6 oz). Do not overload. Some equipment weighing under 2 kgs (4 lbs 6 oz), such as long lenses, may not balance well due to its weight distribution. In such case, please use a larger tripod. Carrying a tripod with a camera left on can result in unexpected accidents. We therefore, recommend you to remove your camera while carrying the tripod. For video cameras, match the Camera Positioning Pin of the Platform to the corresponding hole beneath the camera, and then tighten screw into tripod socket with a coin. Replacement Quick Release Platform for the U 8000 is available. Cat. No. 618-731 Return Quick Release Platform back onto the Pan Head by inserting at an angle from the side closest to the Quick Release Lock Lever. Attaching Camera to the Quick Release Platform To remove the Quick Release Platform from the Pan Head, turn Quick Release Lock Lever counterclockwise, and lift Platform out at an angle from the side closest to the lever. The Retractable Camera Positioning Pin enables you to mount either a video, or a still camera on to the Quick Release Platform. For still cameras, align the length of the Platform along the baseplate of the camera body, and tighten screw into the tripod socket with a coin. How to use the 3 Way Pan Head Vertical Tilt Lock Knob Panning Lock Knob Pan Handle Slik’s 3 way Pan Head allows your still, or video camera, three independent movements. To rotate the camera left or right, loosen the Panning Lock Knob. When you want to lock in at a certain position, tighten the Knob. Turn the Pan Handle barrel counterclockwise until you feel it loosen, and you can tilt the camera up and down. When you have the angle you want, tighten the Handle in a clockwise direction until it locks in. For vertical position shots with your still camera, Ioosen the vertical tilt lock Knob, and tilt the Camera Platform to the desired position. Then lock the Vertical Tilt Lock Knob. Extending the Tripod Legs How to open and close the Tripod Legs Flip up the Leg Lock Lever to extend or shorten any of the individual leg sections to the desired length, and press the Leg Lock Lever flush against the Leg to lock. For greater stableness, use the thicker leg columns first. Choice of Rubber or Spiked Leg Tips Spiked tips are useful outdoors especially on loose grounds or on rocky terrain. Rubber leg tips are recommended for indoor works. To use the spikes, turn the rubber tips clockwise several times until they stop. To get the rubber tips back into position, just turn them counterclockwise . Elevating the Center Column Holding two legs, one in each hand, tilt the tripod on its third leg. Pull the two legs you are holding outward, and all three legs will open at once. Open until the Center Column Ring is seated at the very bottom of the Center Column. To close the legs, be sure to first raise the Center Column Ring up slightly, and then push the legs close. Adjusting Elevation Tension Loosen the Center Column Locking Collar, and turn the Elevation Crank Handle to raise or lower the Center Column. Always be certain to tighten the Locking Collar before taking your hands off the Crank Handle to prevent accidental falls. The “Center Lock” mechanism featured in this model prevents unwanted camera movements which often occurs when tightening the center column. Use the Center Column Tension Adjustment Tube located around the Center Column if you wish to adjust the tension of the Center Column movement. Rotate the tube counterclockwise to increase tension. For less tension, rotate clockwise. Care of the Tripod ・DO NOT apply any grease or oil to this product. ・Clean with a mild detergent and a soft cloth only. ・DO NOT use close to flame. Avoid extreme heat. OIL THINNER SLIK CORPORATION 3-9-19, Nishi-Ochiai, Shinjuku-ku, Tokyo 161-8570, Japan Phone. 81-3-5988-8894 ©2001 Printed in Thailand.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2005:04:08 16:25:12+09:00 Modify Date : 2005:04:08 16:25:12+09:00 Page Count : 2 Creation Date : 2005:04:08 07:25:12Z Mod Date : 2005:04:08 07:25:12Z Producer : Acrobat Distiller 5.0.5 for Macintosh Author : G4 Metadata Date : 2005:04:08 07:25:12Z Creator : G4 Title : U9000 .p..EXIF Metadata provided by EXIF.tools